[SOLVED]Xorg 1.9 Fails to Start

Since the Xorg version bump, X will no longer start using nouveau with KMS enabled.  X prints its pre-start text, the screen clears, then X promptly freezes with a blank screen.  Mashing Ctrl+Alt+Del and Alt+F* seems to indicate that X is not collecting keyboard input.
The logs don't say anything besides what they usually say up till that stage, and there is of course no error output.  Downgrading from [testing] clears this right up, so it must be related to the new Xorg.
Last edited by alexandrite (2010-08-25 10:03:59)

Try again today. Nouveau driver seems to have been updated little later than others or there was problems with it. Version 0.0.16_git20100819-1 works, I downloaded that manually, because it didn't get synced to mirrors yesterday.

Similar Messages

  • [SOLVED] Shorewall Universal configuration fails to start

    I wanted to try shorewall.
    I installed it with pacman:
    $ pacman -Q shorewall
    shorewall 4.6.1.2-1
    I chose the Universal configuration, copying the corresponding files to /etc/shorewall.
    When I try to start it by 'systemctl start shorewall.service', it fails with:
    juin 25 17:54:24 arch64 systemd[1]: Starting Shorewall IPv4 firewall...
    juin 25 17:54:24 arch64 shorewall[24056]: Compiling...
    juin 25 17:54:24 arch64 shorewall[24056]: Processing /etc/shorewall/params ...
    juin 25 17:54:24 arch64 shorewall[24056]: Processing /etc/shorewall/shorewall.conf...
    juin 25 17:54:24 arch64 shorewall[24056]: Loading Modules...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling /etc/shorewall/zones...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling /etc/shorewall/interfaces...
    juin 25 17:54:25 arch64 shorewall[24056]: Determining Hosts in Zones...
    juin 25 17:54:25 arch64 shorewall[24056]: Locating Action Files...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling /etc/shorewall/policy...
    juin 25 17:54:25 arch64 shorewall[24056]: Running /etc/shorewall/initdone...
    juin 25 17:54:25 arch64 shorewall[24056]: Adding rules for DHCP
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling TCP Flags filtering...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling Kernel Route Filtering...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling Martian Logging...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling MAC Filtration -- Phase 1...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling /etc/shorewall/rules...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling /etc/shorewall/conntrack...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling MAC Filtration -- Phase 2...
    juin 25 17:54:25 arch64 shorewall[24056]: Applying Policies...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling /usr/share/shorewall/action.Drop for chain Drop...
    juin 25 17:54:25 arch64 shorewall[24056]: Compiling /usr/share/shorewall/action.Broadcast for chain Broadcast...
    juin 25 17:54:25 arch64 shorewall[24056]: Generating Rule Matrix...
    juin 25 17:54:25 arch64 shorewall[24056]: Optimizing Ruleset...
    juin 25 17:54:25 arch64 shorewall[24056]: Can't use string ("filter") as a HASH ref while "strict refs" in use at /usr/share/shorewall/Chains.pm line 3486.
    juin 25 17:54:25 arch64 shorewall[24056]: /bin/sh: /var/lib/shorewall/.start: Aucun fichier ou dossier de ce type
    juin 25 17:54:25 arch64 shorewall[24056]: /bin/sh: /var/lib/shorewall/.start: Aucun fichier ou dossier de ce type
    juin 25 17:54:25 arch64 systemd[1]: shorewall.service: main process exited, code=exited, status=127/n/a
    juin 25 17:54:25 arch64 systemd[1]: Failed to start Shorewall IPv4 firewall.
    juin 25 17:54:25 arch64 systemd[1]: Unit shorewall.service entered failed state.
    I am unable to understand and fix this issue.
    Can someone help me please?
    Edit: changed the title of the thread.
    Last edited by berbae (2014-08-22 12:33:58)

    Since shorewall 4.6.2.5 the 'interfaces' file of the Universal configuration doesn't work anymore:
    août 19 16:14:09 arch64 shorewall[572]: Shorewall configuration compiled to /var/lib/shorewall/.start
    août 19 16:14:09 arch64 shorewall[572]: Starting Shorewall....
    août 19 16:14:10 arch64 shorewall[572]: ERROR: No network interface available: Firewall state not changed
    août 19 16:14:10 arch64 shorewall[572]: [112B blob data]
    août 19 16:14:10 arch64 systemd[1]: shorewall.service: main process exited, code=exited, status=143/n/a
    août 19 16:14:10 arch64 systemd[1]: Failed to start Shorewall IPv4 firewall.
    août 19 16:14:10 arch64 systemd[1]: Unit shorewall.service entered failed state.
    The compiling stage worked but the generated script didn't.
    I identified the problem to be the usage of the '+' wildcard character in the 'physical' option value of the 'interfaces' file:
    #ZONE INTERFACE OPTIONS
    - lo ignore
    net all dhcp,physical=+,routeback,optional
    As I have only one interface 'eth0', I don't need to use a wildcard character and the 'all' value, so I changed the file to:
    #ZONE INTERFACE OPTIONS
    - lo ignore
    net eth0 dhcp,routeback,optional
    And the firewall works again after that change.
    It's certainly a regression bug introduced in the new releases.
    I changed the title of the thread
    from:
    Newly installed shorewall fails to start
    to:
    shorewall Universal configuration fails to start
    Last edited by berbae (2014-08-22 14:59:46)

  • Xorg-1.8, fails to start

    Hi all, after recent upgrade xorg wont start, i dont have xorg.conf, and im really in stuck, here is Xorg.0.log:
    [ 54385.216]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 54385.217]
    X.Org X Server 1.8.1.902 (1.8.2 RC 2)
    Release Date: 2010-06-21
    [ 54385.217] X Protocol Version 11, Revision 0
    [ 54385.217] Build Operating System: Linux 2.6.34-ARCH x86_64
    [ 54385.217] Current Operating System: Linux c3po 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010 x86_64
    [ 54385.217] Kernel command line: root=/dev/disk/by-uuid/327a2d42-748e-4e5c-b0cf-2c7627a15d53 ro
    [ 54385.217] Build Date: 21 June 2010 12:01:49PM
    [ 54385.217]
    [ 54385.218] Current version of pixman: 0.18.2
    [ 54385.218] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 54385.218] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 54385.218] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 23 12:22:27 2010
    [ 54385.222] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 54385.224] (==) No Layout section. Using the first Screen section.
    [ 54385.224] (==) No screen section available. Using defaults.
    [ 54385.224] (**) |-->Screen "Default Screen Section" (0)
    [ 54385.224] (**) | |-->Monitor "<default monitor>"
    [ 54385.224] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 54385.224] (==) Automatically adding devices
    [ 54385.224] (==) Automatically enabling devices
    [ 54385.230] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 54385.230] Entry deleted from font path.
    [ 54385.235] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 54385.235] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 54385.235] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 54385.235] (II) Loader magic: 0x7ce880
    [ 54385.235] (II) Module ABI versions:
    [ 54385.235] X.Org ANSI C Emulation: 0.4
    [ 54385.235] X.Org Video Driver: 7.0
    [ 54385.235] X.Org XInput driver : 9.0
    [ 54385.235] X.Org Server Extension : 3.0
    [ 54385.247] (--) PCI:*(0:1:0:0) 1002:5e4b:174b:0620 ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] rev 0, Mem @ 0xd0000000/268435456, 0xfdff0000/65536, I/O @ 0x0000ae00/256, BIOS @ 0x????????/131072
    [ 54385.247] (--) PCI: (0:1:0:1) 1002:5e6b:174b:0621 ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] (Secondary) rev 0, Mem @ 0xfdfe0000/65536
    [ 54385.248] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 54385.249] (II) LoadModule: "extmod"
    [ 54385.253] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 54385.255] (II) Module extmod: vendor="X.Org Foundation"
    [ 54385.255] compiled for 1.8.1.902, module version = 1.0.0
    [ 54385.255] Module class: X.Org Server Extension
    [ 54385.255] ABI class: X.Org Server Extension, version 3.0
    [ 54385.255] (II) Loading extension MIT-SCREEN-SAVER
    [ 54385.255] (II) Loading extension XFree86-VidModeExtension
    [ 54385.255] (II) Loading extension XFree86-DGA
    [ 54385.255] (II) Loading extension DPMS
    [ 54385.255] (II) Loading extension XVideo
    [ 54385.255] (II) Loading extension XVideo-MotionCompensation
    [ 54385.255] (II) Loading extension X-Resource
    [ 54385.255] (II) LoadModule: "dbe"
    [ 54385.255] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 54385.256] (II) Module dbe: vendor="X.Org Foundation"
    [ 54385.256] compiled for 1.8.1.902, module version = 1.0.0
    [ 54385.256] Module class: X.Org Server Extension
    [ 54385.256] ABI class: X.Org Server Extension, version 3.0
    [ 54385.256] (II) Loading extension DOUBLE-BUFFER
    [ 54385.256] (II) LoadModule: "glx"
    [ 54385.256] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 54385.259] (II) Module glx: vendor="X.Org Foundation"
    [ 54385.259] compiled for 1.8.1.902, module version = 1.0.0
    [ 54385.259] ABI class: X.Org Server Extension, version 3.0
    [ 54385.259] (==) AIGLX enabled
    [ 54385.259] (II) Loading extension GLX
    [ 54385.260] (II) LoadModule: "record"
    [ 54385.260] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 54385.261] (II) Module record: vendor="X.Org Foundation"
    [ 54385.261] compiled for 1.8.1.902, module version = 1.13.0
    [ 54385.261] Module class: X.Org Server Extension
    [ 54385.261] ABI class: X.Org Server Extension, version 3.0
    [ 54385.261] (II) Loading extension RECORD
    [ 54385.261] (II) LoadModule: "dri"
    [ 54385.261] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 54385.263] (II) Module dri: vendor="X.Org Foundation"
    [ 54385.263] compiled for 1.8.1.902, module version = 1.0.0
    [ 54385.263] ABI class: X.Org Server Extension, version 3.0
    [ 54385.263] (II) Loading extension XFree86-DRI
    [ 54385.263] (II) LoadModule: "dri2"
    [ 54385.263] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 54385.264] (II) Module dri2: vendor="X.Org Foundation"
    [ 54385.264] compiled for 1.8.1.902, module version = 1.2.0
    [ 54385.264] ABI class: X.Org Server Extension, version 3.0
    [ 54385.264] (II) Loading extension DRI2
    [ 54385.264] (==) Matched ati as autoconfigured driver 0
    [ 54385.264] (==) Matched vesa as autoconfigured driver 1
    [ 54385.264] (==) Matched fbdev as autoconfigured driver 2
    [ 54385.264] (==) Assigned the driver to the xf86ConfigLayout
    [ 54385.264] (II) LoadModule: "ati"
    [ 54385.265] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 54385.265] (II) Module ati: vendor="X.Org Foundation"
    [ 54385.265] compiled for 1.8.0, module version = 6.13.0
    [ 54385.265] Module class: X.Org Video Driver
    [ 54385.265] ABI class: X.Org Video Driver, version 7.0
    [ 54385.265] (II) LoadModule: "radeon"
    [ 54385.265] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 54385.270] (II) Module radeon: vendor="X.Org Foundation"
    [ 54385.271] compiled for 1.8.0, module version = 6.13.0
    [ 54385.271] Module class: X.Org Video Driver
    [ 54385.271] ABI class: X.Org Video Driver, version 7.0
    [ 54385.272] (II) LoadModule: "vesa"
    [ 54385.272] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 54385.273] (II) Module vesa: vendor="X.Org Foundation"
    [ 54385.273] compiled for 1.8.0, module version = 2.3.0
    [ 54385.273] Module class: X.Org Video Driver
    [ 54385.273] ABI class: X.Org Video Driver, version 7.0
    [ 54385.273] (II) LoadModule: "fbdev"
    [ 54385.273] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 54385.274] (II) Module fbdev: vendor="X.Org Foundation"
    [ 54385.274] compiled for 1.8.0, module version = 0.4.2
    [ 54385.274] ABI class: X.Org Video Driver, version 7.0
    [ 54385.274] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
    ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
    CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
    CEDAR
    [ 54385.289] (II) VESA: driver for VESA chipsets: vesa
    [ 54385.289] (II) FBDEV: driver for framebuffer: fbdev
    [ 54385.289] (--) using VT number 8
    [ 54385.300] (II) Primary Device is: PCI 01@00:00:0
    [ 54385.300] (II) [KMS] Kernel modesetting enabled.
    [ 54385.300] (WW) Falling back to old probe method for vesa
    [ 54385.300] (WW) Falling back to old probe method for fbdev
    [ 54385.300] (II) Loading sub module "fbdevhw"
    [ 54385.300] (II) LoadModule: "fbdevhw"
    [ 54385.300] (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
    [ 54385.300] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 54385.300] compiled for 1.8.1.902, module version = 0.0.2
    [ 54385.300] ABI class: X.Org Video Driver, version 7.0
    [ 54385.301] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 54385.301] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 54385.301] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 54385.301] (==) RADEON(0): Default visual is TrueColor
    [ 54385.301] (==) RADEON(0): RGB weight 888
    [ 54385.301] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 54385.301] (--) RADEON(0): Chipset: "ATI Radeon X700 PRO (RV410) (PCIE)" (ChipID = 0x5e4b)
    [ 54385.301] (II) RADEON(0): PCIE card detected
    [ 54385.301] (II) RADEON(0): KMS Color Tiling: disabled
    [ 54385.301] drmOpenDevice: node name is /dev/dri/card0
    [ 54385.301] drmOpenDevice: open result is 8, (OK)
    [ 54385.301] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 54385.301] drmOpenDevice: node name is /dev/dri/card0
    [ 54385.301] drmOpenDevice: open result is 8, (OK)
    [ 54385.301] drmOpenByBusid: drmOpenMinor returns 8
    [ 54385.301] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 54385.309] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 54385.329] (II) RADEON(0): Output S-video has no monitor section
    [ 54385.384] (II) RADEON(0): Output DVI-0 has no monitor section
    [ 54385.392] (II) RADEON(0): EDID for output VGA-0
    [ 54385.412] (II) RADEON(0): EDID for output S-video
    [ 54385.466] (II) RADEON(0): EDID for output DVI-0
    [ 54385.466] (II) RADEON(0): Manufacturer: NEC Model: 6692 Serial#: 16843009
    [ 54385.466] (II) RADEON(0): Year: 2006 Week: 26
    [ 54385.466] (II) RADEON(0): EDID Version: 1.3
    [ 54385.466] (II) RADEON(0): Digital Display Input
    [ 54385.466] (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 54385.466] (II) RADEON(0): Gamma: 2.20
    [ 54385.466] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
    [ 54385.466] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 54385.466] (II) RADEON(0): First detailed timing is preferred mode
    [ 54385.466] (II) RADEON(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
    [ 54385.466] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 54385.466] (II) RADEON(0): Supported established timings:
    [ 54385.466] (II) RADEON(0): 720x400@70Hz
    [ 54385.466] (II) RADEON(0): 640x480@60Hz
    [ 54385.466] (II) RADEON(0): 640x480@67Hz
    [ 54385.466] (II) RADEON(0): 640x480@72Hz
    [ 54385.466] (II) RADEON(0): 640x480@75Hz
    [ 54385.466] (II) RADEON(0): 800x600@56Hz
    [ 54385.466] (II) RADEON(0): 800x600@60Hz
    [ 54385.466] (II) RADEON(0): 800x600@72Hz
    [ 54385.466] (II) RADEON(0): 800x600@75Hz
    [ 54385.466] (II) RADEON(0): 832x624@75Hz
    [ 54385.466] (II) RADEON(0): 1024x768@60Hz
    [ 54385.466] (II) RADEON(0): 1024x768@70Hz
    [ 54385.466] (II) RADEON(0): 1024x768@75Hz
    [ 54385.466] (II) RADEON(0): 1280x1024@75Hz
    [ 54385.466] (II) RADEON(0): 1152x864@75Hz
    [ 54385.466] (II) RADEON(0): Manufacturer's mask: 0
    [ 54385.466] (II) RADEON(0): Supported standard timings:
    [ 54385.466] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 54385.466] (II) RADEON(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 54385.466] (II) RADEON(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 54385.466] (II) RADEON(0): Supported detailed timing:
    [ 54385.466] (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 54385.466] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 54385.466] (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 54385.466] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
    [ 54385.466] (II) RADEON(0): Monitor name: 90GX2
    [ 54385.466] (II) RADEON(0): Serial No: 67120771GB
    [ 54385.466] (II) RADEON(0): EDID (in hex):
    [ 54385.466] (II) RADEON(0): 00ffffffffffff0038a3926601010101
    [ 54385.466] (II) RADEON(0): 1a10010380261e78eade95a3544c9926
    [ 54385.466] (II) RADEON(0): 0f5054bfef80714f8140818001010101
    [ 54385.466] (II) RADEON(0): 010101010101302a009851002a403070
    [ 54385.467] (II) RADEON(0): 1300782d1100001e000000fd00384b1f
    [ 54385.467] (II) RADEON(0): 510e000a202020202020000000fc0039
    [ 54385.467] (II) RADEON(0): 304758320a20202020202020000000ff
    [ 54385.467] (II) RADEON(0): 00363731323037373147420a2020006c
    [ 54385.467] (II) RADEON(0): Printing probed modes for output DVI-0
    [ 54385.467] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 54385.467] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 54385.467] (II) RADEON(0): Output VGA-0 disconnected
    [ 54385.467] (II) RADEON(0): Output S-video disconnected
    [ 54385.467] (II) RADEON(0): Output DVI-0 connected
    [ 54385.467] (II) RADEON(0): Using exact sizes for initial modes
    [ 54385.467] (II) RADEON(0): Output DVI-0 using initial mode 1280x1024
    [ 54385.467] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 54385.467] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fac0000
    [ 54385.467] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 54385.468] (==) RADEON(0): DPI set to (96, 96)
    [ 54385.468] (II) Loading sub module "fb"
    [ 54385.468] (II) LoadModule: "fb"
    [ 54385.469] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 54385.471] (II) Module fb: vendor="X.Org Foundation"
    [ 54385.471] compiled for 1.8.1.902, module version = 1.0.0
    [ 54385.471] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 54385.471] (II) Loading sub module "ramdac"
    [ 54385.471] (II) LoadModule: "ramdac"
    [ 54385.471] (II) Module "ramdac" already built-in
    [ 54385.471] (II) Loading sub module "exa"
    [ 54385.471] (II) LoadModule: "exa"
    [ 54385.471] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 54385.472] (II) Module exa: vendor="X.Org Foundation"
    [ 54385.472] compiled for 1.8.1.902, module version = 2.5.0
    [ 54385.472] ABI class: X.Org Video Driver, version 7.0
    [ 54385.472] (II) UnloadModule: "vesa"
    [ 54385.472] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 54385.472] (II) UnloadModule: "fbdev"
    [ 54385.472] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 54385.472] (II) UnloadModule: "fbdevhw"
    [ 54385.472] (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
    [ 54385.472] (--) Depth 24 pixmap format is 32 bpp
    [ 54385.472] (II) RADEON(0): [DRI2] Setup complete
    [ 54385.472] (II) RADEON(0): [DRI2] DRI driver: r300
    [ 54385.472] (II) RADEON(0): Front buffer size: 5120K
    [ 54385.472] (II) RADEON(0): VRAM usage limit set to 226483K
    [ 54385.474] (==) RADEON(0): Backing store disabled
    [ 54385.474] (II) RADEON(0): Direct rendering enabled
    [ 54385.474] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
    [ 54385.474] (II) RADEON(0): Setting EXA maxPitchBytes
    [ 54385.474] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 54385.474] (II) EXA(0): Driver registered support for the following operations:
    [ 54385.474] (II) Solid
    [ 54385.474] (II) Copy
    [ 54385.474] (II) Composite (RENDER acceleration)
    [ 54385.474] (II) UploadToScreen
    [ 54385.474] (II) DownloadFromScreen
    [ 54385.474] (II) RADEON(0): Acceleration enabled
    [ 54385.474] (==) RADEON(0): DPMS enabled
    [ 54385.474] (==) RADEON(0): Silken mouse enabled
    [ 54385.474] (II) RADEON(0): Set up textured video
    [ 54385.476] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 54385.476] (--) RandR disabled
    [ 54385.476] (II) Initializing built-in extension Generic Event Extension
    [ 54385.476] (II) Initializing built-in extension SHAPE
    [ 54385.476] (II) Initializing built-in extension MIT-SHM
    [ 54385.476] (II) Initializing built-in extension XInputExtension
    [ 54385.476] (II) Initializing built-in extension XTEST
    [ 54385.476] (II) Initializing built-in extension BIG-REQUESTS
    [ 54385.476] (II) Initializing built-in extension SYNC
    [ 54385.476] (II) Initializing built-in extension XKEYBOARD
    [ 54385.476] (II) Initializing built-in extension XC-MISC
    [ 54385.476] (II) Initializing built-in extension SECURITY
    [ 54385.476] (II) Initializing built-in extension XINERAMA
    [ 54385.476] (II) Initializing built-in extension XFIXES
    [ 54385.476] (II) Initializing built-in extension RENDER
    [ 54385.476] (II) Initializing built-in extension RANDR
    [ 54385.476] (II) Initializing built-in extension COMPOSITE
    [ 54385.476] (II) Initializing built-in extension DAMAGE
    [ 54385.488] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 54385.488] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 54385.489] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 54385.489] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 54385.489] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    [ 54385.489] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 54385.489] (II) RADEON(0): Setting screen physical size to 338 x 270
    [ 54385.645] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 54385.645] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 54385.645] (II) LoadModule: "evdev"
    [ 54385.645] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 54385.646] (II) Module evdev: vendor="X.Org Foundation"
    [ 54385.646] compiled for 1.8.0, module version = 2.4.0
    [ 54385.646] Module class: X.Org XInput Driver
    [ 54385.646] ABI class: X.Org XInput driver, version 9.0
    [ 54385.646] (**) Power Button: always reports core events
    [ 54385.646] (**) Power Button: Device: "/dev/input/event2"
    [ 54385.681] (II) Power Button: Found keys
    [ 54385.681] (II) Power Button: Configuring as keyboard
    [ 54385.682] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 54385.682] (**) Option "xkb_rules" "evdev"
    [ 54385.682] (**) Option "xkb_model" "evdev"
    [ 54385.682] (**) Option "xkb_layout" "us"
    [ 54385.736] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 54385.736] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 54385.736] (**) Power Button: always reports core events
    [ 54385.736] (**) Power Button: Device: "/dev/input/event1"
    [ 54385.745] (II) Power Button: Found keys
    [ 54385.745] (II) Power Button: Configuring as keyboard
    [ 54385.745] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 54385.745] (**) Option "xkb_rules" "evdev"
    [ 54385.745] (**) Option "xkb_model" "evdev"
    [ 54385.745] (**) Option "xkb_layout" "us"
    [ 54385.755] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event5)
    [ 54385.755] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 54385.755] (**) BTC USB Multimedia Keyboard: always reports core events
    [ 54385.755] (**) BTC USB Multimedia Keyboard: Device: "/dev/input/event5"
    [ 54385.785] (II) BTC USB Multimedia Keyboard: Found keys
    [ 54385.785] (II) BTC USB Multimedia Keyboard: Configuring as keyboard
    [ 54385.785] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD)
    [ 54385.785] (**) Option "xkb_rules" "evdev"
    [ 54385.785] (**) Option "xkb_model" "evdev"
    [ 54385.785] (**) Option "xkb_layout" "us"
    [ 54385.786] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event6)
    [ 54385.786] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 54385.786] (**) BTC USB Multimedia Keyboard: always reports core events
    [ 54385.786] (**) BTC USB Multimedia Keyboard: Device: "/dev/input/event6"
    [ 54385.808] (II) BTC USB Multimedia Keyboard: Found keys
    [ 54385.808] (II) BTC USB Multimedia Keyboard: Configuring as keyboard
    [ 54385.808] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD)
    [ 54385.808] (**) Option "xkb_rules" "evdev"
    [ 54385.808] (**) Option "xkb_model" "evdev"
    [ 54385.808] (**) Option "xkb_layout" "us"
    [ 54385.812] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event7)
    [ 54385.812] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 54385.812] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 54385.812] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event7"
    [ 54385.835] (II) Logitech USB-PS/2 Optical Mouse: Found 10 mouse buttons
    [ 54385.835] (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 54385.835] (II) Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 54385.835] (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 54385.835] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 54385.835] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 54385.835] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 54385.835] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
    [ 54385.835] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 54385.835] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 54385.835] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 54385.835] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 54385.835] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 54385.836] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 54385.836] (II) No input driver/identifier specified (ignoring)
    [ 54385.838] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event4)
    [ 54385.838] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
    [ 54385.838] (**) USB 2.0 Camera: always reports core events
    [ 54385.838] (**) USB 2.0 Camera: Device: "/dev/input/event4"
    [ 54385.861] (II) USB 2.0 Camera: Found keys
    [ 54385.861] (II) USB 2.0 Camera: Configuring as keyboard
    [ 54385.861] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
    [ 54385.861] (**) Option "xkb_rules" "evdev"
    [ 54385.861] (**) Option "xkb_model" "evdev"
    [ 54385.861] (**) Option "xkb_layout" "us"
    [ 54385.863] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 54385.863] (II) No input driver/identifier specified (ignoring)
    [ 54385.866] (II) config/udev: Adding input device PC Speaker (/dev/input/event0)
    [ 54385.866] (II) No input driver/identifier specified (ignoring)
    [ 54386.078] (II) Power Button: Close
    [ 54386.078] (II) UnloadModule: "evdev"
    [ 54386.091] (II) Power Button: Close
    [ 54386.091] (II) UnloadModule: "evdev"
    [ 54386.108] (II) BTC USB Multimedia Keyboard: Close
    [ 54386.108] (II) UnloadModule: "evdev"
    [ 54386.135] (II) BTC USB Multimedia Keyboard: Close
    [ 54386.135] (II) UnloadModule: "evdev"
    [ 54386.188] (II) Logitech USB-PS/2 Optical Mouse: Close
    [ 54386.188] (II) UnloadModule: "evdev"
    [ 54386.215] (II) USB 2.0 Camera: Close
    [ 54386.215] (II) UnloadModule: "evdev"
    there is no errors, so its really strange, any advice ???
    Thanks

    You have a bunch of warnings though:
    [ 54385.300] (II) [KMS] Kernel modesetting enabled.
    [ 54385.300] (WW) Falling back to old probe method for vesa
    [ 54385.300] (WW) Falling back to old probe method for fbdev
    Try to set up a minimal xorg.conf and check if your system if fully updated.
    Registered: 2008-06-23
    Posts: 2
    2 posts in two years - happy ArchAnniversary :-)

  • [SOLVED] X failed to start, then cannot login in tty

    Recently I changed the X's monitor setting at /etc/X11/xorg.conf.d/10-monitor.conf. Seems that there is a wrong setting, and the X failed to start. So when booting, it says: INIT: Id 'x' respawning too fast: disabled for 5 minutes. So I changed to tty2 (alt-F2) and input my usual username and password, but checkpassword always says that my password is wrong.
    So which username and password should I use? Or how to login to my computer?
    The login manager is SLiM, DE is openbox + tint2, tty is fgetty (not agetty).
    Last edited by chrlin (2012-02-10 02:00:06)

    chrlin wrote:
    But I'm still quite disappointed that the system offers no fallback from this kind of error. Any way to get around?
    I guess the system should automatically goes to runlevel 3 (or other runlevel) in case runlevel 5 goes error or something. But it doesn't (Or I'm wrong?).
    Well, in case you couldn't even as root, I had supposed you'd boot with your Arch live cd anyway, chroot properly into your system then, and edit /etc/inittab to runlevel 3. You'd probably be able to login afterwards and do startx from console, see what happens and check the log for errors.
    When booting form cd you can cat it e.g. in /mnt/var/log/Xorg.0.log after mounting btw. -- Maybe there's an alternative way to edit the command line at boot as well, haven't looked for that yet. If there is, you might put that option into the bootloader's config of Arch's fallback kernel installation, so you could choose at startup.
    At least to my knowledge once you configured your system to boot graphically (say, runlevel 5), there's no "fallback mode" into rl3. But what you can also do is to make your display manager able to alternatively get you into console (if possible; I know that's the case for cdm).
    However, if you think your problem is now fixed, you should edit the header of your first post and add [SOLVED].

  • Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

    can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service  Apple Mobile Device  failed to start. Verify that you have sufficent priveleges to start system services.

    I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
    Thanks bluebanana 66

    Hi bluebanana 66,
    Thanks for visiting Apple Support Communities.
    There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Best,
    Jeremy

  • [solved]Network fails to start sometimes

    Hello!
    I'm having a problem with my network. Sometimes it fails to start. Usually, a reboot solves this. Here is the error log:
    [root@claudia log]# cat errors.log
    Aug 6 03:16:28 claudia dhcpcd[3194]: dhcpStart: interface eth0 is not Ethernet or 802.2 Token Ring
    rc.conf:
    # NETWORKING
    HOSTNAME="claudia"
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    eth0="dhcp"
    INTERFACES=(lo eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.1.1"
    ROUTES=(!gateway)
    hosts:
    [root@claudia log]# cat /etc/hosts
    # /etc/hosts: static lookup table for host names
    #<ip> <hostname> <hostname>
    127.0.0.1 localhost.localdomain localhost claudia
    # End of file
    What should I do to solve this?
    Thanks and regards,
    Gustavo

    I'd say it's because since the ethernet over firewire module is loaded too,   it's counted as a network device too - and which one gets to be eth0 depends if the NIC or ethernet over firewire module is loaded first. There are many solutions to this:
    1) If you don't need ethernet over firewire, keep it from being loaded by putting the module name (eth1394 I think) in MOD_BLACKLIST in /etc/rc.conf, like this:
    MOD_BLACKLIST=(eth1394)
    2) You can make both eth0 and eth1 (and perhaps other NICs too) start up together (I do this with my 2 NICs). To do that, make the rc.conf network section something like this:
    lo="lo 127.0.0.1"
    eth0="dhcp"
    eth1="dhcp"
    INTERFACES=(lo eth0 eth1)
    Then you should put a @ in front of "network" ( @network ) in the DAEMONS array unless you like waiting for a NIC that won't start

  • [SOLVED] SSHD fails to start

    Hi to everyone.
    his is my 1st post and the second day I have bee playng with arch linux. I installed everythig up to gnome and everything worked just fine. Nevertheless I'm a newbie and I didn't manage to have sshd working. I followed the wiki but it simply fails to start (either at boottime or from commandline)
    The error message is:
    :: Starting Secure Shell Deamon         [FAIL]
    What can I do ?
    Thanks in advance for any help
    Paolo
    Italy
    Last edited by kayard (2007-09-30 16:27:50)

    I'm not sure why but it works ... and Yes the reason why I was getting "FAILED" when trying to start sshd is because it was already working on port 22.
    I didn't realized this earlier because I couldn't connect from another computer and I thought that was the reason while, in fact, was something else ...
    (for the sake of knowledge during setup my ethernet card was eth1 and after setup the kernel set it up as eth0 but boot-time scripts didn't complain therefore the sistem booted flawlessy with a eth1 apparently working. Changing in rc.conf from eth1 to eth0 solved the problem)
    By the way thanks for the guide and the nmap tip which will cam handy in the future.
    Paolo

  • Sickbeard fails to start. "Unable to write PID file" [Solved]

    I've installed sickbeard from the AUR but can't seem to get it started.
    when running "sudo systemctl start sickbeard.service" I get the following output:
    Job for sickbeard.service failed. See 'systemctl status sickbeard.service' and 'journalctl -xn' for details.
    'systemctl status sickbeard.service' provides:
    sickbeard.service - SickBeard daemon
          Loaded: loaded (/etc/systemd/system/sickbeard.service; disabled)
          Active: failed (Result: exit-code) since Sat 2013-02-23 14:49:19 CST; 1min 4s ago
         Process: 11518 ExecStart=/usr/bin/sickbeard --nolaunch --daemon --quiet --config $SB_CONF --datadir $SB_DATA --port $SB_PORT --pidfile=/run/sickbeard/sickbeard-8081.pid (code=exited, status=1/FAILURE)
    Feb 23 14:49:18 arch systemd[1]: Starting SickBeard daemon...
    Feb 23 14:49:19 arch sickbeard[11518]: Unable to write PID file: No such file or directory [2]
    Feb 23 14:49:19 arch systemd[1]: sickbeard.service: control process exited, code=exited status=1
    Feb 23 14:49:19 arch systemd[1]: Failed to start SickBeard daemon.
    Feb 23 14:49:19 arch systemd[1]: Unit sickbeard.service entered failed state
    And it looks like 'journalctl -xn' provides about the same info:
    -- Logs begin at Tue 2013-01-08 17:25:44 CST, end at Sat 2013-02-23 14:53:29 CST. --
    Feb 23 14:49:19 arch sickbeard[11518]: Unable to write PID file: No such file or directory [2]
    Feb 23 14:49:19 arch systemd[1]: sickbeard.service: control process exited, code=exited status=1
    Feb 23 14:49:19 arch systemd[1]: Failed to start SickBeard daemon.
    -- Subject: Unit sickbeard.service has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/li … temd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Softwar … e9d022f03d
    -- Unit sickbeard.service has failed.
    -- The result is failed.
    Feb 23 14:49:19 arch systemd[1]: Unit sickbeard.service entered failed state
    Also, here is the current systemd file for sickbeard, if that helps:
    [Unit]
    Description=SickBeard daemon
    After=network.target
    [Service]
    EnvironmentFile=/etc/conf.d/sickbeard
    User=sickbeard
    Group=sickbeard
    ExecStart=/usr/bin/sickbeard --nolaunch --daemon --quiet --config "$SB_CONF" --datadir "$SB_DATA" --port "$SB_PORT" --pidfile=/run/sickbeard/sickbeard-8081.pid
    Type=forking
    TimeoutStopSec=20
    PIDFile=/run/sickbeard/sickbeard-8081.pid
    [Install]
    WantedBy=multi-user.target
    So I guess obviously the important part is "Unable to write PID file: No such file or directory [2]", but I'm not really sure what that means or how to fix it. I've played around with the PIDfile configuration for the systemd service (tried renaming from sickbeard to sickbeard-8081) but I always get the same error.
    Any ideas?
    Edit: Solved by teekay
    Last edited by spurious_access (2013-02-24 08:09:01)

    The sabnzbd systemd unit file doesn't use a pidfile. Not sure why. It would make more sense there than it does for sickbeard, because IMHO sickbeard should run as the user who owns the target tv-series media folders. Using tmpfiles.d just causes a headache when you are going to update it using the AUR package.
    I installed it once using sickbeard-git from AUR, changed the systemd unit file and /usr/lib/tmpfiles.d/sickbeard.conf to match my user, chown -R'ed /opt/sickbeard, ran "pacman -R --dbonly sickbeard-git", and ever since use "git pull" to update. That also works directly from web interface.
    Last edited by teekay (2013-02-24 08:47:42)

  • [PARTIALLY SOLVED] HAL fails to start

    ** UPDATE: PARTIALLY SOLVED - SEE BOTTOM OF THE FIRST POST
    HAL fails to start. I'm not exactly sure why this is, but I believe it has something to do with my attempts to get automounting working under gnome.
    [zen@intellitech ~]$ sudo /etc/rc.d/hal start
    :: Starting Hardware Abstraction Layer [FAIL]
    [zen@intellitech ~]$ vim /etc/rc.conf
    MODULES=(acpi-cpufreq cpufreq_ondemand e1000 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore thinkpad_acpi uinput vboxdrv)
    DAEMONS=(syslog-ng @network !net-profiles @net-auto @netfs !samba !crond @acpid @dbus @hal @alsa !daemoot !avahi-daemon @cups @ddclient @bluetooth)
    [zen@intellitech ~]$ pacman -Q | grep hal
    hal 0.5.11-1
    hal-info 0.20080508-1
    [zen@intellitech ~]$ /usr/sbin/hald --daemon=no --verbose=yes
    03:13:37.451 [i] hald.c:669: hal 0.5.11
    03:13:37.451 [i] hald.c:734: Will not daemonize
    03:13:37.451 [i] hald_dbus.c:5381: local server is listening at unix:abstract=/var/run/hald/dbus-pdtZvbqaVq,guid=312b47921cba4c5cdbee099a48ec87d1
    03:13:37.452 [E] ck-tracker.c:367: Error doing GetSeats on ConsoleKit: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
    03:13:37.452 [E] ck-tracker.c:792: Could not get seats and sessions
    03:13:37.452 [W] hald_dbus.c:5806: Could not initialize seats and sessions from ConsoleKit
    Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin'
    03:13:37.453 [i] hald_runner.c:301: Runner has pid 3675
    03:13:37.453 [i] hald_runner.c:182: runner connection is 0x15bdec0
    03:13:37.456 [W] osspec.c:373: Unable to open /proc/mdstat: No such file or directory
    03:13:37.457 [D] util_helper.c:124: drop_privileges: could not set group id
    [zen@intellitech ~]$ vim /etc/group
    root::0:root
    bin::1:root,bin,daemon
    daemon::2:root,bin,daemon
    sys::3:root,bin
    adm::4:root,daemon
    tty::5:root,zen
    disk::6:root,zen
    lp::7:daemon
    mem::8:
    kmem::9:
    wheel::10:root,zen
    ftp::11:
    mail::12:
    log::19:root
    smmsp::25:
    games::50:
    network:x:90:zen
    video:x:91:zen
    audio::92:root,zen
    optical::93:root,zen
    floppy:x:94:root,zen
    storage:x:95:root,zen
    power:x:98:root,zen
    nobody::99:
    users::100:zen
    locate:x:21:
    uucp:x:14:
    http:x:33:
    scanner:x:96:
    dbus:x:81:root,zen
    hal:x:82:root,zen
    avahi:x:84:root,zen
    camera:x:97:
    gdm:x:101:
    vboxusers:x:108:zen
    samba:x:109:zen,root
    * Yes, I know it is bad practice to have a normal user listed under the disk group. It is necessary, however, in order to have raw disk access for virtual box.
    [zen@intellitech ~]$ sudo /etc/rc.d/dbus stop
    :: Stopping D-BUS system messagebus [DONE]
    [zen@intellitech ~]$ sudo /etc/rc.d/hal start
    :: Starting D-BUS system messagebus [DONE]
    :: Starting Hardware Abstraction Layer [FAIL]
    It's odd, because D-BUS will start but hal will not... Anybody have any suggestions?
    * UPDATE (10/08/08): Did a full system upgrade and removed dbus from daemons array in rc.conf. UDEV EVENTS Processing speed seems to be back to normal.
    ** SOLUTION UPDATE: After removing custom ntfs-3g fdi policies from /etc/hal/fdi/policy/, hal seems to load without any problems. This seems to be a bug, since my policies were working at one point, and I believe a hal update caused the problem. I'll see if I can track down the exact hal version that it breaks on, and submit a respective bug report for it.
    ** OFF-TOPIC UPDATE: Using hwdetect --modules to get a modules list, and using these modules in rc.conf with MOD_AUTOLOAD turned off (and also in mkinitcpio.conf and running mkinitcpio -g <path>), seems to have dramatically increased my "Load udev events" processing time. After doing this, my udev speed went from almost 4000ms to literally < 500ms.
    Last edited by intellitech (2008-10-08 14:58:53)

    koch wrote:
    intellitech wrote:DAEMONS=(syslog-ng @network !net-profiles @net-auto @netfs !samba !crond @acpid @dbus @hal @alsa !daemoot !avahi-daemon @cups @ddclient @bluetooth)
    you have dbus starting before hal but hal starts debus by default so please try this...
    DAEMONS=(...@acpid @hal @alsa...)
    and delete debus from that line.
    Removed dbus from the daemons array and hal still won't start. Also, I noticed that the "Loading udev events" portion of the boot process seems to take a lot longer than it used to. Last boot, it took about 19130ms, whereas it used to take < 3000ms. Could these be related?
    Also, I ran a full system upgrade, both udev and hal were upgraded.
    [zen@intellitech ~]$ pacman -Q | grep hal
    hal 0.5.11-4
    hal-info 0.20080508-1
    [zen@intellitech ~]$ pacman -Q | grep udev
    klibc-udev 128-1
    udev 128-5

  • [SOLVED] Crashplan Engine fails to start

    Crashplan Engine fails to start.  Here is the status output from systemctl.
    [steve@scwalla ~]$ systemctl status crashplan.service
    ● crashplan.service - CrashPlan Backup Engine
    Loaded: loaded (/usr/lib/systemd/system/crashplan.service; enabled)
    Active: failed (Result: exit-code) since Thu 2014-09-11 10:12:01 EDT; 30min ago
    Process: 581 ExecStop=/opt/crashplan/bin/CrashPlanEngine stop (code=exited, status=0/SUCCESS)
    Process: 545 ExecStart=/opt/crashplan/bin/CrashPlanEngine start (code=exited, status=0/SUCCESS)
    Main PID: 574 (code=exited, status=126)
    Sep 11 10:11:51 scwalla systemd[1]: Starting CrashPlan Backup Engine...
    Sep 11 10:11:51 scwalla systemd[1]: Started CrashPlan Backup Engine.
    Sep 11 10:11:51 scwalla systemd[1]: crashplan.service: main process exited, code=exited, status=126/n/a
    Sep 11 10:11:51 scwalla CrashPlanEngine[545]: /opt/crashplan/bin/CrashPlanEngine: line 110: warning: setlocale: LC_ALL: cannot change locale (C.UTF-8): No such file or directory
    Sep 11 10:11:51 scwalla CrashPlanEngine[545]: Starting CrashPlan Engine ... Using standard startup
    Sep 11 10:11:51 scwalla CrashPlanEngine[545]: OK
    Sep 11 10:11:51 scwalla CrashPlanEngine[581]: /opt/crashplan/bin/CrashPlanEngine: line 110: warning: setlocale: LC_ALL: cannot change locale (C.UTF-8): No such file or directory
    Sep 11 10:11:51 scwalla CrashPlanEngine[581]: Stopping CrashPlan Engine ... /opt/crashplan/bin/CrashPlanEngine: line 144: kill: (574) - No such process
    Sep 11 10:12:01 scwalla CrashPlanEngine[581]: OK
    Sep 11 10:12:01 scwalla systemd[1]: Unit crashplan.service entered failed state.
    I see the following error in /opt/crashplan/log/engine_error.log.
    [steve@scwalla log]$ cat engine_error.log
    /usr/bin/java: line 2: /usr/lib/jvm/default/bin/java: Too many levels of symbolic links
    /usr/bin/java: line 2: exec: /usr/lib/jvm/default/bin/java: cannot execute: Too many levels of symbolic links
    Can anyone help with this please?
    Last edited by scwalla (2014-09-11 21:52:24)

    Thanks, firecat53.
    I found a thread here: https://bbs.archlinux.org/viewtopic.php?id=186640 that has the solution I used to solve this.
    $ archlinux-java fix

  • [SOLVED]sensord.service fails to start

    Hi there!
    I made a clean Arch install a couple of days ago and I've had problems trying to get sensord to work apropriately. I've went through the troubleshooting of this particular service and googled a lot the last couple of days about this topic but I found nothing really useful (or nothing that I could really understand. Maybe my search terms are not so effective ).
    # systemctl status sensord -l
    [sudo] password for daniel:
    ● sensord.service - Log hardware monitoring data
    Loaded: loaded (/usr/lib/systemd/system/sensord.service; enabled)
    Active: failed (Result: exit-code) since mié 2014-09-03 09:14:04 CLT; 7min ago
    Process: 4231 ExecStart=/usr/sbin/sensord -i $INTERVAL -l $LOG_INTERVAL -f daemon (code=exited, status=127)
    sep 03 09:14:04 Ophiel sensord[4231]: /usr/sbin/sensord: error while loading shared libraries: librrd.so.4: cannot open shared object file: No such file or directory
    sep 03 09:14:04 Ophiel systemd[1]: sensord.service: control process exited, code=exited status=127
    sep 03 09:14:04 Ophiel systemd[1]: Failed to start Log hardware monitoring data.
    sep 03 09:14:04 Ophiel systemd[1]: Unit sensord.service entered failed state.
    This is just a minor annoyance. My system performs great and I have no issues with it. It just annoys the heck out of me to see a service failing in my start up screen.
    I don't know if hardware specs or other logs are useful. But if you need more info, just let me know
    Thanks in advance.
    Last edited by Silex89 (2014-09-03 14:16:15)

    Silex89 wrote:My system performs great and I have no issues with it
    Hmmm ...
    Silex89 wrote:This thread is SOLVED.
    Really ? Maybe there are services working but unrequested, have a look here:
    https://bbs.archlinux.org/viewtopic.php?id=186244
    I thought, that you explicitly installed sensord. Do you need a round robin database to visualize graphically your measured values in Nagios e.g. ?
    Last edited by midixinga (2014-09-03 18:06:06)

  • [SOLVED] apache daemon fails to start on boot, but rc.d restart works?

    I installed apache from the official repos and followed the instructions in the wiki for configuring it. I checked to make sure the http user exists, and I /etc/hosts looks good (to me). Upon boot, the daemon fails to start and I can't load local web pages, but running "rc.d restart httpd" works just fine. Since I'd rather not start it manually every time I boot, is there a way to fix this? Also, httpd is the last daemon in my DAEMONS array.
    /etc/httpd/conf/httpd.conf:
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
    # with ServerRoot set to "/etc/httpd" will be interpreted by the
    # server as "/etc/httpd//var/log/httpd/foo_log".
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk. If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "/etc/httpd"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 127.0.0.1:80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_anon_module modules/mod_authn_anon.so
    LoadModule authn_dbd_module modules/mod_authn_dbd.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    LoadModule auth_digest_module modules/mod_auth_digest.so
    LoadModule file_cache_module modules/mod_file_cache.so
    LoadModule cache_module modules/mod_cache.so
    LoadModule disk_cache_module modules/mod_disk_cache.so
    LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule dbd_module modules/mod_dbd.so
    LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    LoadModule ext_filter_module modules/mod_ext_filter.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    LoadModule substitute_module modules/mod_substitute.so
    LoadModule deflate_module modules/mod_deflate.so
    LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule log_forensic_module modules/mod_log_forensic.so
    LoadModule logio_module modules/mod_logio.so
    LoadModule env_module modules/mod_env.so
    LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule ident_module modules/mod_ident.so
    LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule ssl_module modules/mod_ssl.so
    LoadModule mime_module modules/mod_mime.so
    LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule info_module modules/mod_info.so
    LoadModule suexec_module modules/mod_suexec.so
    LoadModule cgi_module modules/mod_cgi.so
    LoadModule cgid_module modules/mod_cgid.so
    LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    #php
    LoadModule php5_module modules/libphp5.so
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/srv/http">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock /var/run/httpd/cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    #PHP
    Include conf/extra/php5_module.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    /etc/hosts
    # /etc/hosts: static lookup table for host names
    #<ip-address> <hostname.domain.org> <hostname>
    127.0.0.1 localhost.localdomain localhost laptop
    ::1 localhost.localdomain localhost
    # End of file
    Per the wiki, I also tried commenting out the line that reads
    LoadModule unique_id_module modules/mod_unique_id.so
    Either way, it still fails on boot.
    Last edited by pythonscript (2012-06-10 21:14:44)

    The SIGTERM are from reboots, yes. I'm not absolutely sure that the process isn't running; I just know that I can't access http://localhost immediately upon reboot. I have to restart the httpd daemon, which works fine. How would I be able to tell if it's just hung?
    I checked everything.log, and I don't see anything that leaps off the page to me.
    Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1930 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
    Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 2 threads of 1 processes of 1 users.
    Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1931 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
    Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 3 threads of 1 processes of 1 users.
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: RegisterClient 106d33cade29b1ba713392593689729000000018320001
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689729000000018320001 to session
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): uid = 120
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): pid = 1842
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): App gnome-settings-daemon.desktop registered
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase PANEL
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase PANEL
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase DESKTOP
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase DESKTOP
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase APPLICATION
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=106d33cade29b1ba713392593689681600000018320000
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: started pid:1936
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase APPLICATION
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase RUNNING
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmPresence: adding idle watch
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:31 localhost kernel: [ 29.003352] wlan0: no IPv6 routers present
    Jun 9 17:29:31 localhost NetworkManager[765]: <warn> could not commit DNS changes: (0) Could not replace /etc/resolv.conf: Operation not permitted
    Jun 9 17:29:31 localhost NetworkManager[765]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS.
    Jun 9 17:29:31 localhost NetworkManager[765]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
    Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) successful, device activated.
    Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Setting up new connection
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: New client '0x7f9ff0004e60 []'
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Initializing client 0x7f9ff0004e60 []
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 []' received RegisterClient(106d33cade29b1ba713392593689681600000018320000)
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689681600000018320000 to session
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Set properties from client '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: ProcessID = '1936'
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: sending IPv6 Router Solicitation
    Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: no IPv6 Routers available
    Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: sending IPv6 Router Solicitation
    Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: no IPv6 Routers available
    Jun 9 17:29:33 localhost NetworkManager[765]: <warn> error monitoring device for netlink events: error processing netlink message: Object busy
    Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:40 localhost NetworkManager[765]: <info> (eth0): IP6 addrconf timed out or failed.
    Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Jun 9 17:29:41 localhost NetworkManager[765]: <info> (wlan0): IP6 addrconf timed out or failed.
    Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: handling signal 15
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Got callback for signal 15
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Logout called
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: requesting logout
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase RUNNING
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Caught signal 15, shutting down normally.
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Done handling signals
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, 9, 32771, 0)
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: query end session complete
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase END_SESSION
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, c, 32771, 0)
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428a40
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase END_SESSION
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Using ConsoleKit for session tracking
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase EXIT
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]')
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received CloseConnection
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x7f9ff0004e60
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000])
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428ac0
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: last client disconnected - exiting
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase EXIT
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Unreffing manager
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disposing manager
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473070
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473150
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
    Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
    Jun 9 17:29:42 localhost gdm-simple-slave[1728]: WARNING: Child process 1832 was already dead.
    Jun 9 17:29:43 localhost gnome-session[1970]: EggSMClient-WARNING: Desktop file '/home/ak5791/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
    Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2022 of process 2022 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 4 threads of 2 processes of 2 users.
    Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2023 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 5 threads of 2 processes of 2 users.
    Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2024 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 6 threads of 2 processes of 2 users.
    Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
    Jun 9 17:29:44 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.ColorManager'
    Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.colord-sane' (using servicehelper)
    Jun 9 17:29:45 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.colord-sane'
    Jun 9 22:29:46 localhost rtkit-daemon[1910]: Successfully made thread 2079 of process 2079 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Jun 9 22:29:46 localhost rtkit-daemon[1910]: Supervising 7 threads of 3 processes of 2 users.
    Jun 9 17:29:46 localhost pulseaudio[2079]: [pulseaudio] pid.c: Daemon already running.
    Jun 9 17:29:48 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
    Jun 9 17:29:48 localhost udisksd[2110]: udisks daemon version 1.94.0 starting
    Jun 9 17:29:48 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks2'
    Jun 9 17:29:48 localhost udisksd[2110]: Acquired the name org.freedesktop.UDisks2 on the system message bus
    Jun 9 17:29:48 localhost kernel: [ 46.319778] gnome-shell-cal[2103] trap int3 ip:7ff3f55b85e1 sp:7fff94941890 error:0
    Jun 9 17:30:19 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
    Jun 9 22:40:53 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
    Jun 9 22:47:15 localhost kernel: [ 1092.983585] usb 8-1.4.1: new high-speed USB device number 8 using ehci_hcd
    Jun 9 22:47:15 localhost mtp-probe: checking bus 8, device 8: "/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.4/8-1.4.1"
    Jun 9 22:47:15 localhost mtp-probe: bus: 8, device: 8 was not an MTP device
    Jun 9 22:47:15 localhost kernel: [ 1093.132002] usbcore: registered new interface driver uas
    Jun 9 22:47:15 localhost kernel: [ 1093.135601] Initializing USB Mass Storage driver...
    Jun 9 22:47:15 localhost kernel: [ 1093.135785] scsi6 : usb-storage 8-1.4.1:1.0
    Jun 9 22:47:15 localhost kernel: [ 1093.135905] usbcore: registered new interface driver usb-storage
    Jun 9 22:47:15 localhost kernel: [ 1093.135913] USB Mass Storage support registered.
    Jun 9 22:47:16 localhost kernel: [ 1094.137579] scsi 6:0:0:0: Direct-Access Kingston DT 101 G2 1.00 PQ: 0 ANSI: 2
    Jun 9 22:47:16 localhost kernel: [ 1094.140133] sd 6:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.00 GB/7.45 GiB)
    Jun 9 22:47:16 localhost kernel: [ 1094.140631] sd 6:0:0:0: [sdb] Write Protect is off
    Jun 9 22:47:16 localhost kernel: [ 1094.140634] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
    Jun 9 22:47:16 localhost kernel: [ 1094.141128] sd 6:0:0:0: [sdb] No Caching mode page present
    Jun 9 22:47:16 localhost kernel: [ 1094.141132] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Jun 9 22:47:16 localhost kernel: [ 1094.144916] sd 6:0:0:0: [sdb] No Caching mode page present
    Jun 9 22:47:16 localhost kernel: [ 1094.144921] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Jun 9 22:47:16 localhost kernel: [ 1094.146680] sdb: sdb1
    Jun 9 22:47:16 localhost kernel: [ 1094.151407] sd 6:0:0:0: [sdb] No Caching mode page present
    Jun 9 22:47:16 localhost kernel: [ 1094.151411] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Jun 9 22:47:16 localhost kernel: [ 1094.151414] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    Jun 9 22:47:17 localhost ntfs-3g[2636]: Version 2012.1.15 external FUSE 29
    Jun 9 22:47:17 localhost ntfs-3g[2636]: Mounted /dev/sdb1 (Read-Write, label "kingstonGB", NTFS 3.1)
    Jun 9 22:47:17 localhost ntfs-3g[2636]: Cmdline options: rw,nodev,nosuid,uid=1000,gid=100,dmask=0077,fmask=0177,uhelper=udisks2
    Jun 9 22:47:17 localhost ntfs-3g[2636]: Mount options: rw,nodev,nosuid,uhelper=udisks2,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096,default_permissions
    Jun 9 22:47:17 localhost ntfs-3g[2636]: Global ownership and permissions enforced, configuration type 7
    Jun 9 22:47:17 localhost udisksd[2110]: Mounted /dev/sdb1 at /run/media/ak5791/kingstonGB on behalf of uid 1000
    Jun 9 22:47:28 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
    Jun 9 22:47:28 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks'
    Jun 9 22:47:46 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
    Jun 9 22:57:59 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
    Jun 9 23:01:02 localhost /USR/SBIN/CROND[5529]: (root) CMD (run-parts /etc/cron.hourly)
    Jun 9 23:21:02 localhost -- MARK --
    All I notice is that my system's time is having a few problems, since you'll notice that events occur at 22:00 and change, then 17:00 and change, then back to 22:00 and change afterwards. Could this be the problem? I've had the CMOS batteries peg out on me suddenly in the last few weeks. I would hope this sytem is not also suffering a similar fate. Nothing else was happening on my system except for the standard processes from /etc/rc.conf and other standard ones, since I've just been rebooting, checking the logs, then posting here.

  • [SOLVED] - [Gnome 3] GDM error dialog "failed to start session GNOME"

    Hi,
    Just installed Gnome 3 from testing.
    First boot crashed, but that was a missing library for splashy, so removed splash from my grub boot line.
    Now the system boots to GDM. I can start my Xfce session without any issues, but if I select Gnome, I get a dialog "Failed to start session GNOME".
    Following is my GDM greeter log:
    gnome-session[2208]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "/usr/lib/at-spi/at-spi-registryd" (No such file or directory)
    (gnome-settings-daemon:2215): Gtk-WARNING **: gtk_window_set_wmclass: shouldn't set wmclass after window is realized!
    ** (process:2228): DEBUG: Greeter session pid=2228 display=:0 xauthority=/var/run/gdm/auth-for-gdm-RuDxNi/database
    gnome-settings-daemon: xcb_io.c:140: dequeue_pending_request: Assertion `req == dpy->xcb->pending_requests' failed.
    Failed to play sound: File or data not found
    gnome-session[2208]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal
    (polkit-gnome-authentication-agent-1:2229): Gdk-WARNING **: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
    (gnome-power-manager:2226): Gdk-WARNING **: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
    (gnome-settings-daemon:2234): Gtk-WARNING **: gtk_window_set_wmclass: shouldn't set wmclass after window is realized!
    gdm-simple-greeter[2228]: Gtk-WARNING: gtkwidget.c:6778: widget not within a GtkWindow
    gdm-simple-greeter[2228]: WARNING: Unable to read from file /etc/arch-release
    Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1000007 (Login Wind)
    Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
    gdm-simple-greeter[2228]: Gdk-WARNING: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
    Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1000007 (Login Wind)
    Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    (gnome-settings-daemon:2234): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    All help greatly appreciated.
    Cheers.
    Last edited by Padfoot (2011-04-08 23:38:59)

    I just remembered to do that.....
    Think I have found my problem.
    The Arch Wiki for Gnome 3 has the line for installing to a new system
    # pacman -Syu testing/gnome
    This installs gnome 3, but does not include gnome-shell or gnome-panel
    Just installing them now. Will report back shortly.
    Maybe the Wiki should be updated to reflect this, or the package testing/gnome updated to depend on gnome-shell and gnome-panel.
    Cheers.

  • Zram fails to start [SOLVED]

    I installed zramswap in AUR and then activate with
    # systemctl enable zramswap
    I restart and not works:
    ● zramswap.service - Zram-based swap (compressed RAM block devices)
    Loaded: loaded (/usr/lib/systemd/system/zramswap.service; disabled)
    Active: failed (Result: exit-code) since lun 2014-04-21 23:10:39 CLST; 1min 4s ago
    Process: 7078 ExecStart=/usr/lib/systemd/scripts/zramctrl start (code=exited, status=2)
    Main PID: 7078 (code=exited, status=2)
    abr 21 23:10:39 tarro systemd[1]: Starting Zram-based swap (compressed RAM block devices)...
    abr 21 23:10:39 tarro zramctrl[7078]: Setting up swapspace version 1, size = 195804 KiB
    abr 21 23:10:39 tarro zramctrl[7078]: LABEL=zram0, UUID=c7b28bdd-39d9-402d-b782-98deafda976b
    abr 21 23:10:39 tarro systemd[1]: zramswap.service: main process exited, code=exited, status=2/INVALIDARGUMENT
    abr 21 23:10:39 tarro systemd[1]: Failed to start Zram-based swap (compressed RAM block devices).
    abr 21 23:10:39 tarro systemd[1]: Unit zramswap.service entered failed state.
    abr 21 23:10:39 tarro zramctrl[7078]: awk: línea ord.:21: (FILENAME=/proc/meminfo FNR=43) fatal: no se puede redirigir a `/sys/block/zram1/disksize' (No existe el fichero o el directorio)
    Somebody help me?
    Last edited by dunkles (2014-04-23 02:31:35)

    LANG=en_US.UTF-8
    LC_CTYPE="en_US.UTF-8"
    LC_NUMERIC="en_US.UTF-8"
    LC_TIME="en_US.UTF-8"
    LC_COLLATE=C
    LC_MONETARY="en_US.UTF-8"
    LC_MESSAGES="en_US.UTF-8"
    LC_PAPER="en_US.UTF-8"
    LC_NAME="en_US.UTF-8"
    LC_ADDRESS="en_US.UTF-8"
    LC_TELEPHONE="en_US.UTF-8"
    LC_MEASUREMENT="en_US.UTF-8"
    LC_IDENTIFICATION="en_US.UTF-8"
    but the message is the same, half english and half spanish
    ● zramswap.service - Zram-based swap (compressed RAM block devices)
    Loaded: loaded (/usr/lib/systemd/system/zramswap.service; disabled)
    Active: failed (Result: exit-code) since Tue 2014-04-22 09:47:29 CLST; 10s ago
    Process: 16797 ExecStart=/usr/lib/systemd/scripts/zramctrl start (code=exited, status=2)
    Main PID: 16797 (code=exited, status=2)
    Apr 22 09:47:29 tarro zramctrl[16797]: awk: línea ord.:22: (FILENAME=/proc/meminfo FNR=43) aviso: falló la limpieza del fichero de `/sys/block/zram0/disksize' (Dispositivo o recurso ocupado).
    Apr 22 09:47:29 tarro zramctrl[16797]: mkswap: /dev/zram0: warning: wiping old swap signature.
    Apr 22 09:47:29 tarro zramctrl[16797]: Setting up swapspace version 1, size = 195804 KiB
    Apr 22 09:47:29 tarro zramctrl[16797]: LABEL=zram0, UUID=acd4a3a8-c309-4525-b402-379c2f556b5b
    Apr 22 09:47:29 tarro zramctrl[16797]: awk: línea ord.:21: (FILENAME=/proc/meminfo FNR=43) fatal: no se puede redirigir a `/sys/block/zram1/disksize' (No existe el fichero o el directorio)
    Apr 22 09:47:29 tarro systemd[1]: zramswap.service: main process exited, code=exited, status=2/INVALIDARGUMENT
    Apr 22 09:47:29 tarro systemd[1]: Failed to start Zram-based swap (compressed RAM block devices).
    Apr 22 09:47:29 tarro systemd[1]: Unit zramswap.service entered failed state.
    Last edited by dunkles (2014-04-22 20:56:31)

Maybe you are looking for

  • Extracting year and date

    I am working on the following query SELECT report_date, EXTRACT (MONTH FROM report_date) FROM program_details; SELECT a.customer_id, a.report_date as change_date FROM program_details AS a LEFT JOIN program_details AS b on a. customer_id = b. customer

  • How to catch snapshot event in Acrobat 9

    Hi all I scope is catch the snapshot event from acrobt and lanchuing photoshop and paste the snapshot. How I can catach the event? Thanks in advance Regards arul

  • How do I write javascript for a text block to extract name from signature block?

    Hello, I've created a training certificate that the trainee has to sign electronically. To prevent someone from simply putting in their friends name in there and saving it; to send to their friend and help them from having to take the training and qu

  • Why don't my projects and designs save?

    I recently upgraded to multisim 10.  I opened a multisim 9 project and made changes to the design.  No matter if i save the design or the project, when I come back the next day none of my changes are saved - it always opens to the original design.  h

  • How to use a extract?

    Hi , Can i use EXTRACT (FIELD GROUPS) in a ordinary select without any logical database? If yes, send me some sample for that. Thanks, Nithya.