[SOLVED] Xorg problems.. :/
I've got nouveau-dri, libgl. All the nvidia modules are unloaded and nouveau ones are loaded.
xorg-server 1.8.1.902-1
nouveau-dri 7.8.2-1
libgl 7.8.2-1
Also I've got these xf86-input- pkgs:
local/xf86-input-evdev 2.4.0-1 (xorg-input-drivers)
X.org evdev input driver
local/xf86-input-keyboard 1.4.0-2 (xorg-input-drivers)
X.Org keyboard input driver
local/xf86-input-mouse 1.5.0-2 (xorg-input-drivers)
X.org mouse input driver
local/xf86-input-vmmouse 12.6.7-1 (xorg-input-drivers)
X.org VMWare Mouse input driver
When I startx, mpd keeps on playing, but mouse and keyboard is not working.
lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000] (rev c1)
Also the xorg.conf device section thing's in place.
Last edited by sie (2010-07-02 06:15:05)
sie wrote:
Why is X -configure failing? It outputted: http://dpaste.com/213349/
Btw I uninstalled vesa, cause I thought it might be messing something up, but nothing's still working.
remove nouveau, install vesa, have xorg configure vesa, and then simply replace the driver
btw. you should have KMS enabled.
Similar Messages
-
[SOLVED] Xorg problem: fglrx, startx & Xorg -configure
Hi,
On a HP 8510p notebook (Core 2 Duo, AMD/ATI Mobility Radeon HD 2600)
I have just installed Arch Linux, did a system update (pacman -Syu), installed the catalyst package, which depends on xorg-server, among others.
When I do a "Xorg -configure" it fails with a "Fatal server error: Caught signal 11. Server aborting". As I see in /var/log/Xorg.0.log, I don't get an (EE)/error. I just can' understand why the X server fails.
/var/log/Xorg.0.log - with no /etc/X11/xorg.conf file
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux archlinux 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 24 21:09:40 2007
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 103c,30c5 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,2a04 card 103c,30c5 rev 0c class 07,80,00 hdr 80
(II) PCI: 00:03:2: chip 8086,2a06 card 103c,30c5 rev 0c class 01,01,85 hdr 00
(II) PCI: 00:03:3: chip 8086,2a07 card 103c,30c5 rev 0c class 07,00,02 hdr 00
(II) PCI: 00:19:0: chip 8086,1049 card 103c,30c5 rev 03 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,30c5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2811 card 103c,30c5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 103c,30c5 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 103c,30c5 rev 03 class 01,06,01 hdr 00
(II) PCI: 01:00:0: chip 1002,9581 card 103c,30c5 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa08 card 103c,30c5 rev 00 class 04,03,00 hdr 80
(II) PCI: 02:06:0: chip 1180,0476 card 6000,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1180,0476 card 6800,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1180,0832 card 103c,30c5 rev 03 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 1180,0822 card 103c,30c5 rev 20 class 08,05,00 hdr 80
(II) PCI: 02:06:4: chip 1180,0843 card 103c,30c5 rev 10 class 08,80,00 hdr 80
(II) PCI: 10:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,40), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4400000 - 0xe44fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 40: bridge is at (0:28:4), (0,40,40), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 40 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 40 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,7), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4100000 - 0xe43fffff (0x300000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:6:1), (2,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[1] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8
List of video drivers:
fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16
Backtrace:
0: Xorg(xf86SigHandler+0x7e) [0x80d9d5e]
1: [0xb7f03420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x13b) [0xb792a5ab]
3: Xorg(DoConfigure+0x211) [0x80dc9f1]
4: Xorg(InitOutput+0x61a) [0x80a7a9a]
5: Xorg(main+0x296) [0x8073b66]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7cd5390]
7: Xorg(FontFileCompleteXLFD+0x201) [0x80730d1]
Fatal server error:
Caught signal 11. Server aborting
Obs: When I do a "startx", with a custom and minimalist xorg.conf, my notebook stops to respond (doesn't function Ctrl-Alt-Backspace, Alt-F2,3..., Ctrl-C... noting) and the screen is all black.
But first, I think it should work the "Xorg -configure"
Last edited by Claudiu2EE (2007-11-30 18:45:20)Hi!
I'll post some more information...
When I do "startx", like I said, it seems that X is starting, the display changes from grey to black and dark-grey again... but then I can't do nothing to exit, but to press the power button.
So, as no "hwd -x" (uses lshwd -> Segmentation fault) or "Xorg -configure" (Caught signal 11. Server aborting) works, I wrote a xorg.conf by 0, googleing around and inspiring me from the Arch Wiki.
I have no ~/.xinitrc (I have tried with one who had an exec xterm, but no success)
Package information:
xorg-server 1.4-5
xorg-xinit 1.0.7-1
xorg-twm 1.0.1-2
xterm 229-2
catalyst 7.11-1
/etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi/:unscaled"
#FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
#FontPath "/usr/share/fonts/75dpi"
# path to defoma fonts
#FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "AIGLX" "off"
EndSection
Section "Module"
#Load "dri" # direct rendering infrastructure which makes opengl go fast
Load "glx" # glx and glcore implement opengl
#Load "GLcore"
Load "extmod" # collection of X protocol extentions that shouldn't even be loadable
#Load "int10" # vesa bios interface for card setup stuff
#Load "vbe"
#Load "i2c" # serial bus over which you speak the ddc protocol to get info from the monitor
Load "ddc"
Load "freetype" # load freetype fonts and type 1 fonts
Load "type1"
Load "dbe"
EndSection
Section "Extensions"
Option "Composite" "off"
EndSection
Section "InputDevice"
Identifier "Generic Notebook Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Generic USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "on"
EndSection
Section "Device"
Identifier "ATI Mobility Radeon HD 2600"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Notebook Monitor"
ModelName "AUO LCD MONITOR"
VendorName "AUO"
DisplaySize 331 207
VertRefresh 43-60
HorizSync 30-62
Option "DPMS"
# UseModes "Widescreen Modes"
EndSection
#Section "Modes"
# Identifier "Widescreen Modes"
# Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
#EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Mobility Radeon HD 2600"
Monitor "Generic Notebook Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Notebook Keyboard" "CoreKeyboard"
#InputDevice "Generic USB Mouse"
InputDevice "Synaptics Touchpad" "CorePointer"
EndSection
Section "DRI"
Mode 0666
EndSection
/var/log/Xorg.0.log
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux archlinux 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 25 13:34:07 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Notebook Monitor"
(**) | |-->Device "AMD Radeon 2600HD"
(**) |-->Input Device "Generic Notebook Keyboard"
(**) |-->Input Device "Synaptics Touchpad"
(**) Option "AllowMouseOpenFail" "on"
(**) Option "AIGLX" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) No default mouse found, adding one
(**) |-->Input Device "<default pointer>"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 103c,30c5 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,2a04 card 103c,30c5 rev 0c class 07,80,00 hdr 80
(II) PCI: 00:03:2: chip 8086,2a06 card 103c,30c5 rev 0c class 01,01,85 hdr 00
(II) PCI: 00:03:3: chip 8086,2a07 card 103c,30c5 rev 0c class 07,00,02 hdr 00
(II) PCI: 00:19:0: chip 8086,1049 card 103c,30c5 rev 03 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,30c5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2811 card 103c,30c5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 103c,30c5 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 103c,30c5 rev 03 class 01,06,01 hdr 00
(II) PCI: 01:00:0: chip 1002,9581 card 103c,30c5 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa08 card 103c,30c5 rev 00 class 04,03,00 hdr 80
(II) PCI: 02:06:0: chip 1180,0476 card 6000,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1180,0476 card 6800,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1180,0832 card 103c,30c5 rev 03 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 1180,0822 card 103c,30c5 rev 20 class 08,05,00 hdr 80
(II) PCI: 02:06:4: chip 1180,0843 card 103c,30c5 rev 10 class 08,80,00 hdr 80
(II) PCI: 10:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,40), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4400000 - 0xe44fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 40: bridge is at (0:28:4), (0,40,40), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 40 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 40 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,7), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4100000 - 0xe43fffff (0x300000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:6:1), (2,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[1] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16
(--) Chipset Supported AMD Graphics Processor (0x9581) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x8206b38
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[25] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[26] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[27] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[28] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[29] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[34] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[35] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[36] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[37] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[38] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[39] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[40] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[41] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[42] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[43] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[44] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[45] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[46] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
[47] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[48] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
(--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30c5)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe4400000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.56
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M76
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AUO Model: 2074 Serial#: 0
(II) fglrx(0): Year: 2006 Week: 1
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1417 h_border: 0
(II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 815 v_border: 0
(II) fglrx(0): AUO
(II) fglrx(0): B154EW02 V0
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0006af742000000000
(II) fglrx(0): 01100103802115780a1cf59758508e27
(II) fglrx(0): 27505400000001010101010101010101
(II) fglrx(0): 010101010101121b008950200f303020
(II) fglrx(0): 36004bcf100000180000000f00000000
(II) fglrx(0): 00000000000000000020000000fe0041
(II) fglrx(0): 554f0a202020202020202020000000fe
(II) fglrx(0): 004231353445573032205630200a007f
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 12 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 0)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1417 800 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1328 1360 1417 720 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1328 1360 1417 768 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1328 1360 1417 600 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "720x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x432": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 69.30 640 1328 1360 1417 432 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 69.30 640 1328 1360 1417 400 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 69.30 512 1328 1360 1417 384 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 69.30 400 1328 1360 1417 300 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 69.30 320 1328 1360 1417 240 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 69.30 320 1328 1360 1417 200 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Display dimensions: (331, 207) mm
(**) fglrx(0): DPI set to (98, 98)
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1417 800 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1328 1360 1417 720 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1328 1360 1417 768 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1328 1360 1417 600 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "720x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x432": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 69.30 640 1328 1360 1417 432 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 69.30 640 1328 1360 1417 400 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 69.30 512 1328 1360 1417 384 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 69.30 400 1328 1360 1417 300 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 69.30 320 1328 1360 1417 240 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 69.30 320 1328 1360 1417 200 803 809 815 +hsync +vsync (48.9 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pcie] 258048 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe4400000 - 0xe440ffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[7] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[8] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[9] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[10] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[11] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[12] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[13] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[14] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[15] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[16] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[17] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[18] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[19] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[20] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[24] 0 0 0x00004000 - 0x000040ff (0x100) IX[b]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[27] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[28] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[29] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[30] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[31] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[32] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[33] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[35] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[36] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[37] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[38] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[39] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[40] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[41] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[42] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[43] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[44] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[45] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[46] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[47] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[48] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[49] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
[50] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[51] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [drm] installed DRM signal handler
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.43.2
(II) fglrx(0): Date: Nov 9 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.23-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00005000
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01000400
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3277)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2477
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 10
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
[atiddx] ASYNCIO init succeed!
Receive enable interrupt ret message
...irqEnableMask: 60000001
...dwIRQEnableId: 00000006
Receive enable interrupt ret message
...irqEnableMask: 00000040
...dwIRQEnableId: 00000007
Receive enable interrupt ret message
...irqEnableMask: ff00002c
...dwIRQEnableId: 00000008
Receive enable interrupt ret message
...irqEnableMask: ff00002d
...dwIRQEnableId: 00000009
Receive enable interrupt ret message
...irqEnableMask: 20000400
...dwIRQEnableId: 0000000a
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Enable the clock gating
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
Please, assist me in this problem.
Thank you. -
Hi all,
I've been using linux for several years now, and I like it a lot, but it's still not clear in my mind what to do when I run into kernel or Xorg problems.
When I run into a problem with a userland application, it's usually quite simple to identify the culprit or at least the apparent culprit, find the relevant bugzilla, file a bug and try to help the people in charge to fix the problem.
In contrast, the world of low-level stuff is a lot more intimidating. For example, I have had several display and supsend/hibernate problems with my laptop for more than one year now, but I still have no idea what to do about them. What can/ should I do about kernel/Xorg problems?I didn't want this thread to be about my specific problems, but here goes:
- Suspend fails about half of the time, the screen blanks (with a cursor blinking) and the computer just hangs. It is completely dead (REISUB doesn't work)
- Hibernate doesn't work, when I turn the computer on, it checks the filesystems and boots normally
- About 10% of the time, the login manager (currently kdm, but I had the same problem with gdm) shows with a very low resolution. Restarting xorg usually fixes the problem.
I probably have a few more that I'm forgetting at the moment. -
[solved] Xorg 1.8.1 + FGLRX Mouse and keyboard don't work...
Beginning this week i installed Arch linux for the first time (several times infact) and i followed the installtion guide to get gnome working on my machine...
pacman -Sy
pacman -S xorg
pacman -S gnome gnome-system-tools gnome-extra gdm gksu
I also added the "fuse usblp" and " fam hal" entries to /etc/rc.conf in their respective sections as decribed there.
When i would reboot and type gdm the system would start up and i could configure everything else, but after reinstalling this morning this no longer works because the xorg got upgraded to a new version.
When i type gdm or startx in complains that "vesa" has no modes, so i installed and configure the fglrx drivers from the pacman source.
Now comes the actual problem, when i now type gdm or startx i get the graphical enviroment but my keyboard and mouse do not work and the computer is frozen.
I tried going to a diffirent tty but it won't take those commands either.
Does anyone have any idea what the problem could be ? i do not understand what is wrong....
The Solution - Because the vesa driver didn't work i installed fglrx and i deleted this folder called /etc/X11/xorg.conf.d as i had never seen it before and figured that i didn't need it if xorg.conf was present.
Leaving the folder intact solved the problem
it was a noobish mistake from a beginner, sorry folks
Last edited by Dennis Beekman (2010-06-21 10:17:04)Beginning this week i installed Arch linux for the first time (several times infact) and i followed the installtion guide to get gnome working on my machine...
pacman -Sy
pacman -S xorg
pacman -S gnome gnome-system-tools gnome-extra gdm gksu
I also added the "fuse usblp" and " fam hal" entries to /etc/rc.conf in their respective sections as decribed there.
When i would reboot and type gdm the system would start up and i could configure everything else, but after reinstalling this morning this no longer works because the xorg got upgraded to a new version.
When i type gdm or startx in complains that "vesa" has no modes, so i installed and configure the fglrx drivers from the pacman source.
Now comes the actual problem, when i now type gdm or startx i get the graphical enviroment but my keyboard and mouse do not work and the computer is frozen.
I tried going to a diffirent tty but it won't take those commands either.
Does anyone have any idea what the problem could be ? i do not understand what is wrong....
The Solution - Because the vesa driver didn't work i installed fglrx and i deleted this folder called /etc/X11/xorg.conf.d as i had never seen it before and figured that i didn't need it if xorg.conf was present.
Leaving the folder intact solved the problem
it was a noobish mistake from a beginner, sorry folks
Last edited by Dennis Beekman (2010-06-21 10:17:04) -
[solved]Xorg cound't run on Nvidia
EDIT：thank everyone helping me, and I have solved my problems.
NOTE:my laptop is actualty equiped with dual graphics and using wiki https://wiki.archlinux.org/index.php/NVIDIA_Optimus it work prefect!
my new laptop is ASUS A550JK which is reported has one graphics card(Nvidia GTX 850m)
first of all , I'm confused how many graphics cards in it really because lspci's output is this:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 850M] (rev a2)
03:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5287 (rev 01)
04:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
it seems that it has two graphics cards:
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 850M] (rev a2)
whats the fact?
I try to collect imformations (in China network) about this laptop ,all webpage and even ASUS information never say this laptop has dual graphics cards, and I have tried bumblebee itreturned xdisplay error..
EDIT:maybe i am wrong, I have found two webpages that describe this laptop(ASUS A550JK4710)actually is hybrid graphics.
secondly . Im trying to install xorg after just install package nvidia and configed using nvidia-xconfig. when running startx it reports:
[ 12402.822]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 12402.823] X Protocol Version 11, Revision 0
[ 12402.824] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 12402.824] Current Operating System: Linux EastpigerLaptop 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 12402.824] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=dd8cb64e-ee13-462b-b35a-bddf5abf37aa rw quiet
[ 12402.825] Build Date: 31 July 2014 11:53:19AM
[ 12402.826]
[ 12402.826] Current version of pixman: 0.32.6
[ 12402.827] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12402.827] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12402.830] (==) Log file: "/var/log/Xorg.3.log", Time: Wed Sep 10 05:39:34 2014
[ 12402.831] (==) Using config file: "/etc/X11/xorg.conf"
[ 12402.831] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12402.832] Parse error on line 40 of section Monitor in file /etc/X11/xorg.conf
"Display" is not a valid keyword in this section.
[ 12402.832] (EE) Problem parsing the config file
[ 12402.832] (EE) Error parsing the config file
[ 12402.832] (EE)
Fatal server error:
[ 12402.833] (EE) no screens found(EE)
[ 12402.834] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 12402.836] (EE) Please also check the log file at "/var/log/Xorg.3.log" for additional information.
[ 12402.836] (EE)
[ 12402.837] (EE) Server terminated with error (1). Closing log file.
so I add BusID "PCI:1:0:0" into /etc/X11/xorg.conf . try startx again and it seems that xorg can run longer but I didnt get Interface and tty stucked.
This is my /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 340.32 (buildmeister@swio-display-x64-rhel04-01) Tue Aug 5 21:15:33 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
and this is /var/log/Xorg.3.log(I run it on tty 3 )
[ 12437.283]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 12437.284] X Protocol Version 11, Revision 0
[ 12437.284] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 12437.285] Current Operating System: Linux EastpigerLaptop 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 12437.285] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=dd8cb64e-ee13-462b-b35a-bddf5abf37aa rw quiet
[ 12437.285] Build Date: 31 July 2014 11:53:19AM
[ 12437.286]
[ 12437.286] Current version of pixman: 0.32.6
[ 12437.287] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12437.287] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12437.289] (==) Log file: "/var/log/Xorg.3.log", Time: Wed Sep 10 05:40:09 2014
[ 12437.289] (==) Using config file: "/etc/X11/xorg.conf"
[ 12437.290] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12437.290] (==) ServerLayout "Layout0"
[ 12437.290] (**) |-->Screen "Screen0" (0)
[ 12437.290] (**) | |-->Monitor "Monitor0"
[ 12437.290] (**) | |-->Device "Device0"
[ 12437.290] (**) |-->Input Device "Keyboard0"
[ 12437.290] (**) |-->Input Device "Mouse0"
[ 12437.290] (==) Automatically adding devices
[ 12437.290] (==) Automatically enabling devices
[ 12437.290] (==) Automatically adding GPU devices
[ 12437.290] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 12437.290] Entry deleted from font path.
[ 12437.290] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12437.290] Entry deleted from font path.
[ 12437.290] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 12437.290] Entry deleted from font path.
[ 12437.290] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12437.290] Entry deleted from font path.
[ 12437.290] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12437.290] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12437.290] Entry deleted from font path.
[ 12437.290] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12437.290] (==) FontPath set to:
/usr/share/fonts/misc/
[ 12437.290] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12437.290] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 12437.290] (WW) Disabling Keyboard0
[ 12437.290] (WW) Disabling Mouse0
[ 12437.290] (II) Loader magic: 0x818d80
[ 12437.290] (II) Module ABI versions:
[ 12437.290] X.Org ANSI C Emulation: 0.4
[ 12437.290] X.Org Video Driver: 18.0
[ 12437.290] X.Org XInput driver : 21.0
[ 12437.290] X.Org Server Extension : 8.0
[ 12437.291] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c4
[ 12437.291] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 12437.292] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 1
[ 12437.292] (EE) Error systemd-logind returned paused fd for drm node
[ 12437.292] (II) systemd-logind: releasing fd for 226:1
[ 12437.292] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12437.292] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[ 12437.293] (--) PCI:*(0:0:2:0) 8086:0416:1043:178d rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 12437.293] (--) PCI: (0:1:0:0) 10de:1391:1043:178d rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 12437.293] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 12437.293] (II) LoadModule: "glx"
[ 12437.293] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12437.300] (II) Module glx: vendor="NVIDIA Corporation"
[ 12437.300] compiled for 4.0.2, module version = 1.0.0
[ 12437.300] Module class: X.Org Server Extension
[ 12437.300] (II) NVIDIA GLX Module 340.32 Tue Aug 5 20:32:43 PDT 2014
[ 12437.300] (II) LoadModule: "nvidia"
[ 12437.300] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12437.300] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12437.300] compiled for 4.0.2, module version = 1.0.0
[ 12437.300] Module class: X.Org Video Driver
[ 12437.300] (II) NVIDIA dlloader X Driver 340.32 Tue Aug 5 20:13:04 PDT 2014
[ 12437.300] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12437.300] (++) using VT number 4
[ 12437.300] (--) controlling tty is VT number 4, auto-enabling KeepTty
[ 12437.300] (II) Loading sub module "fb"
[ 12437.300] (II) LoadModule: "fb"
[ 12437.300] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12437.300] (II) Module fb: vendor="X.Org Foundation"
[ 12437.300] compiled for 1.16.0, module version = 1.0.0
[ 12437.300] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12437.300] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 12437.300] (II) Loading sub module "wfb"
[ 12437.300] (II) LoadModule: "wfb"
[ 12437.300] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 12437.300] (II) Module wfb: vendor="X.Org Foundation"
[ 12437.300] compiled for 1.16.0, module version = 1.0.0
[ 12437.300] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12437.300] (II) Loading sub module "ramdac"
[ 12437.300] (II) LoadModule: "ramdac"
[ 12437.300] (II) Module "ramdac" already built-in
[ 12437.300] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12437.300] (==) NVIDIA(0): RGB weight 888
[ 12437.300] (==) NVIDIA(0): Default visual is TrueColor
[ 12437.300] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12437.301] (**) NVIDIA(0): Enabling 2D acceleration
[ 12437.301] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 12437.302] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 850M (GM107-A) at PCI:1:0:0 (GPU-0)
[ 12437.302] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 12437.302] (--) NVIDIA(0): VideoBIOS: 82.07.47.00.05
[ 12437.302] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 12437.302] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 850M at PCI:1:0:0
[ 12437.302] (--) NVIDIA(0): none
[ 12437.302] (II) NVIDIA(0): Validated MetaModes:
[ 12437.302] (II) NVIDIA(0): "NULL"
[ 12437.302] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 12437.302] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 12437.302] (**) NVIDIA(0): DPI set to (8, 11); computed from "DisplaySize" Monitor
[ 12437.302] (**) NVIDIA(0): section option
[ 12437.302] (--) Depth 24 pixmap format is 32 bpp
[ 12437.302] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 12437.302] (II) NVIDIA: access.
[ 12437.305] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 12437.305] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 12437.305] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 12437.305] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 12437.305] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 12437.305] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 12437.305] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 12437.305] (II) NVIDIA(0): Config Options in the README.
[ 12437.305] (II) NVIDIA(0): Setting mode "NULL"
[ 12437.305] (EE) NVIDIA(0): Failed to initiate mode change.
[ 12437.305] (EE) NVIDIA(0): Failed to complete mode change
[ 12437.314] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 12437.318] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 12437.318] (==) NVIDIA(0): Backing store enabled
[ 12437.318] (==) NVIDIA(0): Silken mouse enabled
[ 12437.319] (==) NVIDIA(0): DPMS enabled
[ 12437.319] (II) Loading sub module "dri2"
[ 12437.319] (II) LoadModule: "dri2"
[ 12437.319] (II) Module "dri2" already built-in
[ 12437.319] (II) NVIDIA(0): [DRI2] Setup complete
[ 12437.319] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 12437.319] (--) RandR disabled
[ 12437.322] (II) Initializing extension GLX
[ 12437.341] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 12437.341] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12437.341] (II) LoadModule: "evdev"
[ 12437.341] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12437.341] (II) Module evdev: vendor="X.Org Foundation"
[ 12437.341] compiled for 1.16.0, module version = 2.9.0
[ 12437.341] Module class: X.Org XInput Driver
[ 12437.341] ABI class: X.Org XInput driver, version 21.0
[ 12437.342] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
[ 12437.342] (II) Using input driver 'evdev' for 'Power Button'
[ 12437.342] (**) Power Button: always reports core events
[ 12437.342] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 12437.342] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12437.342] (--) evdev: Power Button: Found keys
[ 12437.342] (II) evdev: Power Button: Configuring as keyboard
[ 12437.342] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 12437.342] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12437.342] (**) Option "xkb_rules" "evdev"
[ 12437.342] (**) Option "xkb_model" "pc104"
[ 12437.342] (**) Option "xkb_layout" "us"
[ 12437.353] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 12437.353] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12437.354] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 29 paused 0
[ 12437.354] (II) Using input driver 'evdev' for 'Video Bus'
[ 12437.354] (**) Video Bus: always reports core events
[ 12437.354] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 12437.354] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12437.354] (--) evdev: Video Bus: Found keys
[ 12437.354] (II) evdev: Video Bus: Configuring as keyboard
[ 12437.354] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16/event9"
[ 12437.354] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12437.354] (**) Option "xkb_rules" "evdev"
[ 12437.354] (**) Option "xkb_model" "pc104"
[ 12437.354] (**) Option "xkb_layout" "us"
[ 12437.354] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 12437.354] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12437.354] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 30 paused 0
[ 12437.354] (II) Using input driver 'evdev' for 'Video Bus'
[ 12437.354] (**) Video Bus: always reports core events
[ 12437.354] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 12437.354] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12437.354] (--) evdev: Video Bus: Found keys
[ 12437.354] (II) evdev: Video Bus: Configuring as keyboard
[ 12437.354] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:5f/LNXVIDEO:00/input/input15/event8"
[ 12437.354] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 12437.354] (**) Option "xkb_rules" "evdev"
[ 12437.354] (**) Option "xkb_model" "pc104"
[ 12437.354] (**) Option "xkb_layout" "us"
[ 12437.355] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 12437.355] (II) No input driver specified, ignoring this device.
[ 12437.355] (II) This device may have been added with another device file.
[ 12437.355] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 12437.355] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 12437.355] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 31 paused 0
[ 12437.355] (II) Using input driver 'evdev' for 'Sleep Button'
[ 12437.355] (**) Sleep Button: always reports core events
[ 12437.355] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 12437.355] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 12437.355] (--) evdev: Sleep Button: Found keys
[ 12437.355] (II) evdev: Sleep Button: Configuring as keyboard
[ 12437.355] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[ 12437.355] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 12437.355] (**) Option "xkb_rules" "evdev"
[ 12437.355] (**) Option "xkb_model" "pc104"
[ 12437.355] (**) Option "xkb_layout" "us"
[ 12437.355] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 12437.355] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 12437.356] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 32 paused 1
[ 12437.356] (EE) Error systemd-logind returned paused fd for drm node
[ 12437.356] (II) systemd-logind: releasing fd for 226:1
[ 12437.356] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[ 12437.356] (II) No input driver specified, ignoring this device.
[ 12437.356] (II) This device may have been added with another device file.
[ 12437.356] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event11)
[ 12437.356] (II) No input driver specified, ignoring this device.
[ 12437.356] (II) This device may have been added with another device file.
[ 12437.356] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event12)
[ 12437.356] (II) No input driver specified, ignoring this device.
[ 12437.356] (II) This device may have been added with another device file.
[ 12437.357] (II) config/udev: Adding input device USB Camera (/dev/input/event7)
[ 12437.357] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[ 12437.357] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 33 paused 0
[ 12437.357] (II) Using input driver 'evdev' for 'USB Camera'
[ 12437.357] (**) USB Camera: always reports core events
[ 12437.357] (**) evdev: USB Camera: Device: "/dev/input/event7"
[ 12437.357] (--) evdev: USB Camera: Vendor 0xbda Product 0x57b4
[ 12437.357] (--) evdev: USB Camera: Found keys
[ 12437.357] (II) evdev: USB Camera: Configuring as keyboard
[ 12437.357] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input14/event7"
[ 12437.357] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 10)
[ 12437.357] (**) Option "xkb_rules" "evdev"
[ 12437.357] (**) Option "xkb_model" "pc104"
[ 12437.357] (**) Option "xkb_layout" "us"
[ 12437.357] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 12437.357] (II) No input driver specified, ignoring this device.
[ 12437.357] (II) This device may have been added with another device file.
[ 12437.358] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[ 12437.358] (II) No input driver specified, ignoring this device.
[ 12437.358] (II) This device may have been added with another device file.
[ 12437.358] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 12437.358] (II) No input driver specified, ignoring this device.
[ 12437.358] (II) This device may have been added with another device file.
[ 12437.358] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event5)
[ 12437.358] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 12437.358] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 34 paused 0
[ 12437.358] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 12437.358] (**) Asus WMI hotkeys: always reports core events
[ 12437.358] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event5"
[ 12437.358] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 12437.358] (--) evdev: Asus WMI hotkeys: Found keys
[ 12437.358] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 12437.358] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input13/event5"
[ 12437.358] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[ 12437.358] (**) Option "xkb_rules" "evdev"
[ 12437.358] (**) Option "xkb_model" "pc104"
[ 12437.358] (**) Option "xkb_layout" "us"
[ 12437.358] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 12437.358] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 12437.359] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 35 paused 0
[ 12437.359] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 12437.359] (**) AT Translated Set 2 keyboard: always reports core events
[ 12437.359] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 12437.359] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 12437.359] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 12437.359] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 12437.359] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 12437.359] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 12437.359] (**) Option "xkb_rules" "evdev"
[ 12437.359] (**) Option "xkb_model" "pc104"
[ 12437.359] (**) Option "xkb_layout" "us"
[ 12437.359] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
[ 12437.359] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 12437.359] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 36 paused 0
[ 12437.359] (II) Using input driver 'evdev' for 'ETPS/2 Elantech Touchpad'
[ 12437.359] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 12437.359] (**) evdev: ETPS/2 Elantech Touchpad: Device: "/dev/input/event6"
[ 12437.360] (--) evdev: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 12437.360] (--) evdev: ETPS/2 Elantech Touchpad: Found 1 mouse buttons
[ 12437.360] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute axes
[ 12437.360] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute multitouch axes
[ 12437.360] (--) evdev: ETPS/2 Elantech Touchpad: Found x and y absolute axes
[ 12437.360] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute touchpad.
[ 12437.360] (II) evdev: ETPS/2 Elantech Touchpad: Configuring as touchpad
[ 12437.360] (**) evdev: ETPS/2 Elantech Touchpad: YAxisMapping: buttons 4 and 5
[ 12437.360] (**) evdev: ETPS/2 Elantech Touchpad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12437.360] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event6"
[ 12437.360] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[ 12437.360] (II) evdev: ETPS/2 Elantech Touchpad: initialized for absolute axes.
[ 12437.360] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 12437.360] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
[ 12437.360] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 12437.360] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 12437.360] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 12437.360] (II) No input driver specified, ignoring this device.
[ 12437.360] (II) This device may have been added with another device file.
[ 12437.360] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 12437.360] (II) No input driver specified, ignoring this device.
[ 12437.360] (II) This device may have been added with another device file.
[ 12444.665] (II) systemd-logind: got pause for 226:0
[ 12444.665] (II) systemd-logind: got pause for 13:67
[ 12444.665] (II) systemd-logind: got pause for 13:73
[ 12444.665] (II) systemd-logind: got pause for 13:72
[ 12444.665] (II) systemd-logind: got pause for 13:66
[ 12444.665] (II) systemd-logind: got pause for 13:71
[ 12444.665] (II) systemd-logind: got pause for 13:69
[ 12444.665] (II) systemd-logind: got pause for 13:64
[ 12444.665] (II) systemd-logind: got pause for 13:70
I'm sorry for my English skills because I'm a chinese student.
I have tried what I can but cannot deal with it , and I really need help.
Thank everyone will help me .
Last edited by eastpiger (2014-09-10 06:34:36)Thank you very much and I have deleted these words already. Im sorry to annoy someone...
I try to collect imformations (in China network) about this laptop ,all webpage and even ASUS information never say this laptop has dual graphics cards, and I have tried bumblebee itreturned xdisplay error..
EDIT:maybe i am wrong, I have found two webpages that describe this laptop(ASUS A550JK4710)actually is hybrid graphics.
and xorg error seems due to the deriver?
Trilby wrote:
Welcome to the forums. Please note that the "NEED HELP PLEASE" especially in all caps is not needed in your title - and it might well be annoying to many forum users which might make them less happy to try to help.
Second, the lspci ouput indicates you have hybrid graphics. I don't have much experience with these systems, but they are well documented in the wiki. As far as I know you can't use *just* the NVIDIA (but I might be wrong) - I'm pretty sure if you want to use just one of the video cards you can use just the intel. Hopefully someone with experience with hybrid graphics will confirm or correct this.
For now, see here: https://wiki.archlinux.org/index.php/NVIDIA_Optimus
EDIT: after reading that wiki page I'm more doubtful of my own statements so I've crossed them out. But it seems there are various steps needed to configure the use of the nvidia drivers.
Last edited by eastpiger (2014-09-09 15:37:59) -
[SOLVED] Xorg & Firefox lock Gnome desktop, causing massive CPU usage
Hi there,
since I have installed ArchLinux x64 on this laptop (Core 2 Duo, 9600M GT with Nvidia's binary driver 195.36.15-2, Gnome 2.30) Xorg spins out of control every so often - more often repeatedly in an hour, sometimes not for a prolonged time.
This appears to occur (so far only) when Firefox is running (with any site, independent of Flash, but looks as if its main window has to be open) with which it then consumes an entire CPU core, making the mouse pointer and any terminal cursor blink rapidly, as well as windows being selectable, but not e. g. resizable or closable. Any keyboard input to a terminal has to be hammered in repeatedly to be accepted.
It also seems as if it is especially prone to happen if another program (say, gThumb) is ordered to switch to full-screen by F11 with FF's window open in the background, which frequently for whatever reason then also wants to change into full-screen, causing "conflict".
Switching to a console and killing Firefox or starting it via terminal and canceling it there ends each occurrence of the issue. Xorg.0.log does not report any errors.
An upgrade to Xorg 1.8 does not appear to have affected it.
I know this bug (or ones like it) has also occurred to others for years now, but I have so far been unable to find any solutions in reports concerning it.
Any help, please?
My xorg.conf (many options in "Device" have been inserted as attempts to solve the issue):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Dec 9 16:34:26 PST 2009
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "ignoreABI" "True"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "extmod"
Load "dbe"
Load "record"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputClass"
Identifier "touchpad catchall"
MatchIsTouchpad "on"
Driver "synaptics"
Option "TapButton1" "1"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "True"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G96 [GeForce 9600M GT]"
Option "AllowIndirectPixmaps" "True"
Option "AllowSHMPixmaps" "0"
Option "AddARGBGLXVisuals" "True"
Option "BackingStore" "True"
Option "DPI" "96 x 96"
Option "DynamicTwinView" "1"
Option "NoLogo" "True"
Option "OnDemandVBlankInterrupts" "True"
Option "PixmapCacheSize" "2000000"
Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x3333; PowerMizerDefault=0x3; PowerMizerDefaultAC=0x1"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
edit: I cannot say exactly what apparently ended this issue, however (of the changes I explicitly remember) after the following it does no longer occur:
1. Had to delete the extensions.* (cache, ini, rdf) files as they became corrupted.
2. Removed the Fox Splitter (aka Split Browser) extension.
Last edited by misc (2010-06-23 12:14:09)Daemonjax wrote:Try another browser and see what happens... I like chromium.
Well yes, I though about this too, but that certainly wouldn't solve the problem (esp. were it to appear with other apps); besides, there are just way too many features (extensions, scripts etc.) that Chrome a) does not have or b) would be a royal pain to properly add.
Last edited by misc (2010-04-16 10:01:31) -
[SOLVED]xorg-server 1.14.4-1 - mouse wheel not responding while moving
I notice a relapse of the bug (https://bugs.archlinux.org/task/29191 and https://bugs.freedesktop.org/show_bug.cgi?id=48167) since the xorg-server upgrade. Downgrade to 1.14.3-2 solves the problem. The problem is noticed in ioQuake3 engines.
UPDATE:
The problem was relative to the mouse brand and model since other mouses didn't have issues. After a few kernel upgrades the problem went away thus I'm marking this thread SOLVED.
Last edited by rationalperseus (2014-01-03 19:13:41)I've just tested some of the games that had that bug and they all seem fine so I'm thinking it's a different bug, perhaps in ioQuake3.
-
[SOLVED] Xorg 'Out of Scan Range, Change Timing Signal'
Hi, all!
I'm just doing a fresh install and having done my first reboot, I am trying desperately to configure X, before installing xfce.
I have an ATI Radeon card and a Sun-GDM5410 21" CRT monitor. Unfortunately, when I do 'startx', I get a message on my monitor saying
'Out of scan range...change timing signal'
I've tried created custom Xorg files instead of letting Xorg work it out, itself. This didn't solve the problem. So as not to further confuse myself, I have rm'd these files and have let X manage itself, again.
I've read and re-read the Xorg and ATI wiki guides, and Google'd around, but I can't get around this.
Any help really appreciated.
Cheers,
Chris.
Last edited by chris_debian (2011-02-05 18:00:28)I did. I think it may be something to do with module that are loaded, possibly kms?
This is what the lsmod looks like from the LMDE installation; I'm using the Radeon driver for my ATI card.
mint@mint ~/Desktop $ uname -a
Linux mint 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47 UTC 2010 i686 GNU/Linux
mint@mint ~/Desktop $ lsmod
Module Size Used by
ppdev 4058 0
lp 5570 0
sco 5857 2
bridge 32987 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25167 0
l2cap 21705 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36327 6 sco,bnep,rfcomm,l2cap
speedstep_lib 2468 0
cpufreq_userspace 1480 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_conservative 4018 0
binfmt_misc 4907 1
fuse 43758 1
arc4 974 2
ecb 1405 2
rt61pci 15720 0
crc_itu_t 1035 1 rt61pci
snd_intel8x0 19523 2
rt2x00pci 3773 1 rt61pci
snd_ac97_codec 79148 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
rt2x00lib 19029 2 rt61pci,rt2x00pci
snd_pcm 47214 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
led_class 1757 1 rt2x00lib
radeon 508914 2
snd_seq_midi 3576 0
mac80211 123258 2 rt2x00pci,rt2x00lib
ttm 33378 1 radeon
snd_rawmidi 12505 1 snd_seq_midi
cfg80211 87601 2 rt2x00lib,mac80211
drm_kms_helper 18305 1 radeon
snd_seq_midi_event 3684 1 snd_seq_midi
rfkill 10264 4 bluetooth,cfg80211
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
drm 112020 4 radeon,ttm,drm_kms_helper
eeprom_93cx6 963 1 rt61pci
i2c_algo_bit 3497 1 radeon
i2c_i801 6462 0
snd_timer 12258 2 snd_pcm,snd_seq
tpm_tis 5496 0
tpm 8137 1 tpm_tis
parport_pc 15799 1
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_core 12696 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
pcspkr 1207 0
tpm_bios 3569 1 tpm
shpchp 21220 0
evdev 5609 10
rng_core 2178 0
parport 22554 3 ppdev,lp,parport_pc
snd 34363 13 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pci_hotplug 18065 1 shpchp
soundcore 3450 1 snd
button 3598 0
processor 26599 0
snd_page_alloc 5045 2 snd_intel8x0,snd_pcm
squashfs 16647 1
loop 9757 2
aufs 107674 1
nls_utf8 908 1
isofs 24608 1
ide_generic 801 0 [permanent]
ide_core 59618 1 ide_generic
usbhid 27980 0
hid 50629 1 usbhid
sg 15968 0
sr_mod 10770 1
sd_mod 25869 0
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
ata_generic 2019 0
ata_piix 17640 1
floppy 40923 0
thermal 9206 0
uhci_hcd 16057 0
e100 22317 0
mii 2714 1 e100
libata 115665 2 ata_generic,ata_piix
ehci_hcd 27763 0
usbcore 98402 4 usbhid,uhci_hcd,ehci_hcd
scsi_mod 101401 4 sg,sr_mod,sd_mod,libata
nls_base 4541 3 nls_utf8,isofs,usbcore
thermal_sys 9378 2 processor,thermal
Last edited by chris_debian (2011-02-04 21:51:16) -
[SOLVED] xorg crash- fresh system
I install lasted arch x64 in my PC. I have problem with xorg. Xorg start but, show only black screen with cursor. I use XFCE with slim. Before instillation I make pacman -Suy etc..
LOG:
[ 131.473] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 131.473] (II) Using input driver 'evdev' for ' USB Keyboard'
[ 131.473] (**) USB Keyboard: always reports core events
[ 131.473] (**) evdev: USB Keyboard: Device: "/dev/input/event6"
[ 131.473] (--) evdev: USB Keyboard: Vendor 0x1241 Product 0x1503
[ 131.473] (--) evdev: USB Keyboard: Found keys
[ 131.473] (II) evdev: USB Keyboard: Configuring as keyboard
[ 131.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/input/input6/event6"
[ 131.473] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 11)
[ 131.473] (**) Option "xkb_rules" "evdev"
[ 131.473] (**) Option "xkb_model" "evdev"
[ 131.473] (**) Option "xkb_layout" "us"
[ 131.473] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event7)
[ 131.474] (II) No input driver specified, ignoring this device.
[ 131.474] (II) This device may have been added with another device file.
[ 131.474] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 131.474] (II) No input driver specified, ignoring this device.
[ 131.474] (II) This device may have been added with another device file.
[ 145.933] (II) VESA(0): Setting up VESA Mode 0x17D (1920x1200)
[ 145.936] (II) VESA(0): VBESetVBEMode failed
[ 145.939]
Fatal server error:
[ 145.939] EnterVT failed for screen 0
[ 145.939]
[ 145.939]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 145.939] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 145.939]
[ 145.939] (II) evdev: USB Keyboard: Close
[ 145.939] (II) UnloadModule: "evdev"
[ 145.939] (II) evdev: USB Keyboard: Close
[ 145.939] (II) UnloadModule: "evdev"
[ 145.939] (II) evdev: A4Tech USB Full Speed: Close
[ 145.939] (II) UnloadModule: "evdev"
[ 145.939] (II) evdev: A4Tech USB Full Speed: Close
[ 145.939] (II) UnloadModule: "evdev"
[ 145.939] (II) evdev: Power Button: Close
[ 145.939] (II) UnloadModule: "evdev"
[ 145.939] (II) evdev: Power Button: Close
[ 145.939] (II) UnloadModule: "evdev"
[ 146.202] Server terminated with error (1). Closing log file.
Last edited by sobota (2012-04-08 21:11:12)I solve this problem- remove xf86-video-nv packet.
Last edited by sobota (2012-04-08 21:11:42) -
[solved] Xorg update makes screen become black for short time now a...
Hello,
when using the new xorg-server package, my screen becomes black for an instant every once in a while, needing some time to switch back on (perhaps a backlight problem?). This appears to be partially induced by fast mousewheel movements, but is not dependent on. The worst situations seem to be a XFCE-terminal producing lots of output or scrolling in Opera. Then the interrupts become inacceptable (about 1:1 on:off-ratio). The problem occured for the first time some weeks ago (when the xorg-server update was moved to current). In the meantime I have downgraded back to the previous versions of xorg-server and xf86-drivers, the problems have gone.
I use xf86-video-radeon open-source driver with an Radeon 9200, AIGLX, nothing like beryl or compiz but the default XFCE desktop without compositing. Removing the xorg.conf or using the vga or vesa drivers doesn't solve the problem. My system has the most current packages installed (nothing from testing). Frequencies and resolution should be all right (the xorg.conf worked with the old packages).
Another question: Where can I see which xorg-version is distributed in the repo? It should be something like 7.4 but the only package I have installed is xorg-server with version 1.2.0-5.
If you need more information, please ask me! Thank you for your answers.
fi-dschi
EDIT: Now I have the xorg-server from testing installed. As I deactivated the hSync-settings in xorg.conf I now have much less trouble. Scrolling and quick movements of windows etc. now don't cause problems. Yet the screen has just become black again, without any apparent reason.
Last edited by fi-dschi (2008-01-19 12:47:14)I have good news: The problem now does hardly ever reappear. I have installed the xorg-server from testing and now my screen becomes black about once a day what is perfectly acceptable. As I don't know whether tis is healthful for my screen I am still interested in a clean solution. So please post your ideas if you know what the reason could be.
The german forums have given me some replies which, as yet, don't include an explanation for my monitors' interruptions. The thread can be found here:
http://forum.archlinux.de/?page=Postings;thread=7298
fi-dschi -
[SOLVED] XOrg redirects keyboard to login
Hello everyone.
It seems that everything I write everywhere in my system (including this post) ends up written as input to /dev/tty1, and read by login --, here I go with the details.
I have had this arch linux setup running for 2 years pretty steadily. My machine is an HP-Envy 17-j00s, I use i3wm and lightdm. Last week I noticed I couldn't open a virtual console. When I press ctrl-alt-fN the screen blinks for less than a second, then everything goes back to the Xorg environment. Also, if I exit I3 (Mod-shift-e) then I can access a virtual console from the lightdm login screen and everything seems to work fine, but I cannot open a virtual console from lightdm if I haven't logged in and closed i3 before.
Yesterday, after suspending the system for the 2nd or 3rd time in a row, every command that required elevation refused to work. poweroff/reboot with setuid flag enabled didn't work, sudo delayed for a while and then terminated with a timeout error, that unfortunately I did not copy.
Reading my journal, I found an alarming amount of messages of failed logons. After reading some of them I noticed the usernames that failed to log in were things I had typed somewhere else:
jun 15 16:43:36 margott login[1813]: FAILED LOGIN 2 FROM tty1 FOR code~, Authentication failure
jun 15 16:43:36 margott login[1813]: pam_tally(login:auth): pam_get_uid; no such user
jun 15 16:43:39 margott login[1813]: pam_unix(login:auth): check pass; user unknown
jun 15 16:43:39 margott login[1813]: pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=tty1 ruser= rhost=
Note the 'code~', that is something I typed in this post (the bbcode tag [ code]).
In order to confirm my suspects I opened a terminal and typed
sudo cat /dev/tty1
and started typing in emacs. Everytime I pressed enter in the editor a new line appeared in the terminal.
I also checked that only Xorg and agetty were using tty1:
arch@margott> sudo lsof | grep "/dev/tty1" ~
lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/1000/gvfs
Output information may be incomplete.
Xorg 564 root 10u CHR 4,1 0t0 1042 /dev/tty1
Xorg 564 789 root 10u CHR 4,1 0t0 1042 /dev/tty1
Xorg 564 790 root 10u CHR 4,1 0t0 1042 /dev/tty1
Xorg 564 791 root 10u CHR 4,1 0t0 1042 /dev/tty1
agetty 1665 root 0u CHR 4,1 0t0 1042 /dev/tty1
agetty 1665 root 1u CHR 4,1 0t0 1042 /dev/tty1
agetty 1665 root 2u CHR 4,1 0t0 1042 /dev/tty1
The recent changes I am aware of are:
- Installing alternative drivers for my rt3290 network card, from AUR, since the card stopped working in certain cases (I needed to boot windows in order to use it again).
- Installing fprintd and libfprint in an attempt to get my fingerprint reader working (I think this is probably the root of the issue). It seems to be unsopported by current versions.
- Reinstalling bbswitch and nvidia drivers; Recently (since linux4?), the nvidia driver won't load unless I do this every kernel update.
- Updates (who knows...)
I have removed fprintd, libfprint and the new rt3290 driver in a failed attempt to solve the problem.
Any clues what is going on?
Thank you in advance!
Last edited by edmeme (2015-06-15 20:42:17)Don't know why this happened, just reinstalled X11 and lighdtm (maybe reinstalling X11 was an overkill), everything seems to work now, but in tty7 instead of 1 as it used to,
It bothers me don't knowing what caused this failure, but I noted that login briefly started before lightdm, both in the same tty, when login should never start if X11 is present.
If anyone has a clue about what caused this I'd still appreciate it. -
When I login to update my existing apps, the login window shows the wrong apple id. i cannot change it because it is all grayed out. how do i solve this problem?
Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. -
This is regarding a brand new ASUS PA 279Q, 2560 x 1440 IPS monitor. I'm connected via mini display port (into thunderbolt port on MacBook Pro) to display port on ASUS monitor; using cable ASUS included with the monitor. Mid 2012 MacBook Pro…full specs at bottom of this post.
I have resolution set at 2560 x 1440 which is the native resolution according to the ASUS spec. I tried the other resolutions available in my System Preferences and text displayed rough with those settings too. I've tried adjusting contrast, brightness and sharpness via the ASUS control panel and didn't solve the problem. Also tried calibrating via Mac's system preferences/display and that did not improve text display either. All the text on this monitor (no matter what software I launch, Finder, InDesign, Illustrator, MS Word, Excel, VMWare Windows XP, Windows versions of Word, Excel, Acrobat, etc, all are consistently rendering text the same way --- ROUGH and with "HALOS" around each letter.
All point sizes of text and at various scales, display very rough on the screen. (My comparison is the retina display of my MBP and a Thunderbolt…so those two displays are my expectations.) I'm using the same MBP for both a Thunderbolt display (at work) and this ASUS at my home office.
On the ASUS it's not as noticeable when the text is on white backgrounds, but I'm a graphic designer and compose images with text all day everyday. Not to mention the specs on this ASUS PA279Q indicate it's built for the professional so I would expect better text rendering. I haven't even addressed color calibration and balance yet, because that won't matter to me if the text won't display any better than it is now.
I was so hopeful after researching all the specs on this monitor it would be a viable alternative to the glossy display of the Thunderbolt display. (Which, I do love the Thunderbolt display for it's clarity and how it displays crisp, clean text at all sizes. (This ASUS actually displays text decently if I increase the text so each letter is about 4" high. Which is pointless for practical purposes -- that'd be like doing page layout through a microscope!)
I kept holding off on getting a monitor for the home office thinking the Thunderbolt would be updated soon. I'd be sick if I dropped a grand on piece of 2011 technology only to learn a few days later an updated Thunderbolt display hit the market! Not to mention, I'm praying Apple comes out with a less reflective Thunderbolt display. The glare and reflection is the main reason I looked elsewhere for a large monitor; hence my asking for help. Hoping the ASUS text display issue can be worked out. My expectation is for it to display like the MBP retina and Thunderbolt display text. That possible?
Alternatively, I guess I could do the Apple Refurb Thunderbolt at $799. And see if there's a decent aftermarket anti-glare I could stick on it?
Thanks for reading my post. Hope someone can help; offer any suggestions? Words or wisdom?
Has anyone else had similar issues and figured out a resolution? Help!
MacBook Pro
Retina, Mid 2012, 2.3 Ghz Intel i7
8GB 1600 MHz DDR3
OS X 10.8.5
NVIDIA GeForce GT 650M 1024 MB
ASUS PA279QI uninstalled those two items. It still runs slow on start-up and when opening safari, firefox, iphoto, itunes, etc. It's not snappy like it used to be. Any other ideas? Thanks.
-
after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
How can I solve this problem?Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long. -
Problem with an incoming message. For example, during my conversation the second line receives a call, I hear the sound in dynamics such as "piiiip piiiip," but when in this situation I recieve SMS and i hear established melody and I do't hear the person on all over SMS. How to solve this problem? Perhaps someone tell me? save in advance
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Please help - can't get itunes to work
Hey - I would appreciate any help with the following: I have already downloaded itunes to my desktop and successfully created an account and downloaded to my ipod nano...however, today, suddenly, I can no longer do any of that - I logged in to the it
-
Sys.utl_file has many errors. How to re-create
hi all, I tried using the utility utl_file in my procedures and it showed out sys.utl_file has many errors and when i went through like $ sqlplus /nolog SQL*Plus: Release 9.2.0.8.0 - Production on Tue Mar 4 12:50:08 2008 Copyright (c) 1982, 2002, Ora
-
Crystal Reports Server XI , Infoview and Internet Explorer 7
Hi, We have just upgraded to IE 7 and we are facing some problems in the Crystal Reports Viewer that is launched from Infoview when users run reports off of Crystal Reports Server XI. - there is no horizontal scroll bar - the print button on the CR V
-
Trex Indexing giving HTTP Status Code 401:Unauthorized error
Dear All, We have configured TREX search on KM repository of our EP production server and trying to search using the same our KM repository. The TREX is installed on the a separate server. When we try to Index production repository the documents are
-
How do we create variable for hierarchy node selection
hello all, I have to create a variable as to where the user ca input the node of hierarchy in his selection at the start. Do we have to create a new variable ? I have the hierarchy loaded for that infoobject. I tried creating a new variable but the w