[Solved] XServer 1.13 and Catalyst...

Hi, after the last update i can't start my xserver.
Systemd says, that gdm starts fine but i can't see anything except my tty
Heres the Xorg.0.log:
[ 170.848]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 170.878] X Protocol Version 11, Revision 0
[ 170.888] Build Operating System: Linux 3.6.0-1-ARCH x86_64
[ 170.899] Current Operating System: Linux arch247 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
[ 170.899] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7f15c92f-c86f-49dd-ab06-f89a4a37d526 ro init=/usr/lib/systemd/systemd nomodeset
[ 170.924] Build Date: 05 October 2012 01:57:18PM
[ 170.937]
[ 170.949] Current version of pixman: 0.26.2
[ 170.976] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 170.976] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 171.033] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 18:30:14 2012
[ 171.049] (==) Using config file: "/etc/X11/xorg.conf"
[ 171.064] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 171.064] (==) ServerLayout "aticonfig Layout"
[ 171.064] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 171.064] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 171.064] (**) | |-->Device "aticonfig-Device[0]-0"
[ 171.064] (==) Automatically adding devices
[ 171.064] (==) Automatically enabling devices
[ 171.064] (==) Automatically adding GPU devices
[ 171.065] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 171.065] Entry deleted from font path.
[ 171.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 171.065] Entry deleted from font path.
[ 171.065] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 171.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 171.065] Entry deleted from font path.
[ 171.065] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 171.065] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 171.065] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 171.065] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 171.065] (II) Loader magic: 0x7fcc20
[ 171.065] (II) Module ABI versions:
[ 171.065] X.Org ANSI C Emulation: 0.4
[ 171.065] X.Org Video Driver: 13.0
[ 171.065] X.Org XInput driver : 18.0
[ 171.065] X.Org Server Extension : 7.0
[ 171.068] (--) PCI:*(0:0:1:0) 1002:9802:1043:84a5 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 171.068] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 171.084] Initializing built-in extension Generic Event Extension
[ 171.099] Initializing built-in extension SHAPE
[ 171.114] Initializing built-in extension MIT-SHM
[ 171.130] Initializing built-in extension XInputExtension
[ 171.145] Initializing built-in extension XTEST
[ 171.160] Initializing built-in extension BIG-REQUESTS
[ 171.175] Initializing built-in extension SYNC
[ 171.190] Initializing built-in extension XKEYBOARD
[ 171.205] Initializing built-in extension XC-MISC
[ 171.220] Initializing built-in extension SECURITY
[ 171.235] Initializing built-in extension XINERAMA
[ 171.250] Initializing built-in extension XFIXES
[ 171.265] Initializing built-in extension RENDER
[ 171.280] Initializing built-in extension RANDR
[ 171.295] Initializing built-in extension COMPOSITE
[ 171.311] Initializing built-in extension DAMAGE
[ 171.326] Initializing built-in extension MIT-SCREEN-SAVER
[ 171.342] Initializing built-in extension DOUBLE-BUFFER
[ 171.358] Initializing built-in extension RECORD
[ 171.374] Initializing built-in extension DPMS
[ 171.390] Initializing built-in extension X-Resource
[ 171.406] Initializing built-in extension XVideo
[ 171.422] Initializing built-in extension XVideo-MotionCompensation
[ 171.439] Initializing built-in extension XFree86-VidModeExtension
[ 171.455] Initializing built-in extension XFree86-DGA
[ 171.472] Initializing built-in extension XFree86-DRI
[ 171.489] Initializing built-in extension DRI2
[ 171.489] (II) "glx" will be loaded by default.
[ 171.489] (II) LoadModule: "glx"
[ 171.489] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 171.490] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 171.490] compiled for 6.9.0, module version = 1.0.0
[ 171.507] Loading extension GLX
[ 171.507] (II) LoadModule: "fglrx"
[ 171.508] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 171.538] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 171.538] compiled for 1.4.99.906, module version = 9.0.2
[ 171.538] Module class: X.Org Video Driver
[ 171.538] (II) Loading sub module "fglrxdrm"
[ 171.538] (II) LoadModule: "fglrxdrm"
[ 171.539] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 171.539] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 171.539] compiled for 1.4.99.906, module version = 9.0.2
[ 171.539] (II) AMD Proprietary Linux Driver Version Identifier:9.00.2
[ 171.539] (II) AMD Proprietary Linux Driver Release Identifier: 9.00.11
[ 171.539] (II) AMD Proprietary Linux Driver Build Date: Sep 20 2012 11:56:16
[ 171.539] (--) using VT number 2
[ 171.649] (WW) Falling back to old probe method for fglrx
[ 171.660] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 171.663] ukiDynamicMajor: found major device number 251
[ 171.663] ukiDynamicMajor: found major device number 251
[ 171.663] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 171.663] ukiOpenDevice: node name is /dev/ati/card0
[ 171.663] ukiOpenDevice: open result is 9, (OK)
[ 171.663] ukiOpenDevice: Get driver state failed
[ 171.663] ukiOpenByBusid: ukiOpenMinor returns 9
[ 171.664] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 171.665] (--) Chipset Supported AMD Graphics Processor (0x9802) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:2) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 171.668] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 171.668] (II) AMD Video driver is signed
[ 171.669] (II) fglrx(0): pEnt->device->identifier=0x165d5a0
[ 171.669] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 171.670] (II) Loading sub module "vgahw"
[ 171.670] (II) LoadModule: "vgahw"
[ 171.670] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 171.670] (II) Module vgahw: vendor="X.Org Foundation"
[ 171.670] compiled for 1.13.0, module version = 0.1.0
[ 171.670] ABI class: X.Org Video Driver, version 13.0
[ 171.670] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 171.670] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 171.670] (==) fglrx(0): Default visual is TrueColor
[ 171.670] (**) fglrx(0): Option "DPMS" "true"
[ 171.671] (==) fglrx(0): RGB weight 888
[ 171.671] (II) fglrx(0): Using 8 bits per RGB
[ 171.671] (==) fglrx(0): Buffer Tiling is ON
[ 171.671] (II) Loading sub module "fglrxdrm"
[ 171.671] (II) LoadModule: "fglrxdrm"
[ 171.671] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 171.671] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 171.671] compiled for 1.4.99.906, module version = 9.0.2
[ 171.674] ukiDynamicMajor: found major device number 251
[ 171.675] ukiDynamicMajor: found major device number 251
[ 171.675] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 171.675] ukiOpenDevice: node name is /dev/ati/card0
[ 171.675] ukiOpenDevice: open result is 12, (OK)
[ 171.675] ukiOpenDevice: Get driver state failed
[ 171.675] ukiOpenByBusid: ukiOpenMinor returns 12
[ 171.675] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 171.675] (EE) fglrx(0): The graphics processor is already set to console mode, set X mode fail. Cannot start X.
[ 171.675] (EE) fglrx(0): PreInit failed
[ 171.675] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === end
[ 171.683] SetVBEMode failed
[ 171.683] (II) UnloadModule: "fglrx"
[ 171.683] (II) UnloadSubModule: "fglrxdrm"
[ 171.683] (II) Unloading fglrxdrm
[ 171.683] (II) UnloadSubModule: "vgahw"
[ 171.683] (II) Unloading vgahw
[ 171.683] (II) UnloadSubModule: "fglrxdrm"
[ 171.683] (EE) Screen(s) found, but none have a usable configuration.
[ 171.683]
Fatal server error:
[ 171.683] no screens found
[ 171.683] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 171.684] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 171.684] (EE)
[ 171.920] Server terminated with error (1). Closing log file.
Xserver is at version 1.13, catalyst should be at version 12.9
The xorg.conf-file was generated through aticonfig --inital and worked before the update. While searching the net i came across /etc/dbus-1/gdm.conf, maybe its a permission-problem?
Any help is appreciated
Last edited by D4ve (2012-10-13 21:31:54)

Had also a problem with xorg 1.13 and catalyst. (just not gdm but slim).
I found this:
The main graphics drivers have already been updated to support the new API. The proprietary NVIDIA graphics driver has also been updated for the X.Org Server 1.13 ABI. The only common driver not yet supporting this new xorg-server release is the AMD Catalyst binary driver, but the API/ABI support should be there within a few months.
Source: http://www.phoronix.com/scan.php?page=n … px=MTE3Njg
Seems that is the reason.
In this topic [1] Vi0L0 said that catalyst-test from AUR works with xorg 1.13 from [testing]. I didn't test that. I just downgraded xorg-server, xorg-server-common, catalyst-utils, lib32-catalyst-utils (and xf86-input-evdev because the newest package has always dep. to the newest xorg-server).
[1] https://bbs.archlinux.org/viewtopic.php … 0#p1172200
My package versions are (after downgrading):
xorg-server 1.12.4-1
xorg-server-common 1.12.4-1
catalyst 12.8-2
catalyst-utils 12.8-2
lib32-catalyst-utils 12.8-2
Edit: I just realised that there is a new catalyst package (catalyst-dkms) on the [community], i always used the package from the [catalyst] repo (Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch).
Last edited by sysrmr (2012-10-13 18:37:54)

Similar Messages

[SOLVED] xserver 1.5 and KDE 4 keymaps - strange behavior

I apologize if this has already been addressed, but I have read every thread about this I can find, and the wiki page, and I can't find a solution.
I use a standard US keyboard (it's a laptop), but with the Dvorak keymap. Most things work fine, except for any Ctrl-Alt combinations. For example, ctrl-alt-left is detected as D. ctrl-alt-right is C, ctrl-alt-up is A, and ctrl-alt-down is B. These are my shortcuts for switching desktops, so I use them constantly. The Windows key works perfectly, as do ctrl-shift sequences.
There's no problem in the VTs, and in xev, all the keys are detected normally. I've also discovered that I can temporarily fix the problem by going into system settings, unsetting a shortcut, than resetting it, but this only lasts for that one session. The next time I start KDE, the problem returns.
I have removed my input devices from xorg.conf after upgrading to xserver 1.5, and in KDE system settings I've set it to Evdev-managed keyboard, with the us map and dvorak variant. My /etc/hal/fdi/policy/10-keymap.fdi is as follows:
<?xml version="1.0" encoding="ISO-8859-1"?> 
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>

<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">dvorak</merge>



</match>
</device>
</deviceinfo>
The 3 lines that I've commented out at the end have been on and off at various times - makes no difference. I've also noticed that in Xorg.0.log, there are 4 keyboards detected and enabled by HAL, as you can see here:
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "dvorak"
(**) Video Bus: xkb_layout: "dvorak"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "dvorak"
(**) Video Bus: xkb_layout: "dvorak"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "dvorak"
(**) Video Bus: xkb_layout: "dvorak"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "dvorak"
(**) AT Translated Set 2 keyboard: xkb_layout: "dvorak"
Any ideas are welcome...I'm totally stumped!!
Last edited by noahsark1126 (2008-12-03 05:32:59)

cameel wrote:
Executing
setxkbmap -model evdev
brings things back to normality.
I don't know, however, whether it is a bug in KDE (I am using KDEmod 3.5.10) or in xkeyboard-config package which provides setxkbmap and its config files - in particular /usr/share/X11/xkb/symbols/inet which contains definitions for keyboard models.
I don't think this is a bug in KDE, as this fixed a problem I was having with xmodmap on Openbox.
If I used xmodmap to remap my Caps Lock key to Ctrl in my openbox startup scripts, odd things happen to my keymap (Super key stops working, left arrow key stops repeating, etc). Running setxkbmap before xmodmap seems to fix everything.
Thanks!
Last edited by tom5760 (2008-12-06 02:22:16)

[solved] lib32-mesa-libgl and catalyst-total are in conflict

Steam now depends on lib32-mesa-libgl which is in conflict with catalyst-total.
lib32-mesa-libgl and catalyst-total are in conflict (lib32-libgl)
I'm not sure where to go from here.
EDIT:
catalyst-total was updated 5 minutes after I made this post. The issue has been resolved.
Last edited by beardedlinuxgeek (2013-02-26 19:32:00)

I have the same problem, please help

[SOLVED] catalyst-daemon and catalyst-hook are in conflict

hi
i want upgrade my system , but i see catalyst-hook and catalyst-daemon are in conflict and uneasy not install daemon and hook on system , so what can i do ?
[root@WhiteCrow1 arash]# pacman -Syu
:: Starting full system upgrade...
:: Replace catalyst with catalyst/catalyst-daemon? [Y/n] y
:: Replace catalyst with catalyst/catalyst-generator? [Y/n] y
:: Replace catalyst with catalyst/catalyst-hook? [Y/n] y
resolving dependencies...
looking for inter-conflicts...
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: catalyst-daemon and catalyst-hook are in conflict
Last edited by arastoo.s (2011-02-13 14:04:57)

As far as I know catalyst-daemon and catalyst-hook provide the same module so they are in conflict. The difference is that catalyst-daemon uses a daemon at startup to check for a new kernel and compile a new module when needed. Catalyst-hook does the same thing with a hook.
I picked the daemon method and just answered no to replace with -hook or -generator (catalyst-generator also conflicts with the others). Just choose the one you like.
https://wiki.archlinux.org/index.php/AT … D_packages

[SOLVED] Mesa and Catalyst Conflicting

I have had this problem for a while. Everytime I use pacman -Syu, I have to comment out the extra repo. Otherwise, it says that mesa and catalyst are conflicting. Any solutions?
[username@arch ~]$ sudo pacman -Syu
:: Synchronizing package databases...
catalyst is up to date
catalyst-stable is up to date
catalyst-hd234k is up to date
testing is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
multilib-testing is up to date
multilib is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
:: mesa-libgl and catalyst-test are in conflict (libgl). Remove catalyst-test? [y/N]
Last edited by fiendfan1 (2013-10-16 04:45:53)

Mr.Elendig wrote:pacman -Qs xf86-video-
pacman -Qs 'dri$'
pacman -Qs xf86-video-
[fiendfan1@arch ~]$ sudo pacman -Qs xf86-video-
local/xf86-video-ark 0.7.5-3 (xorg-drivers xorg)
X.org ark video driver
local/xf86-video-ast 0.97.0-3 (xorg-drivers xorg)
X.org ASPEED AST Graphics video driver
local/xf86-video-cirrus 1.5.2-2 (xorg-drivers xorg)
X.org Cirrus Logic video driver
local/xf86-video-dummy 0.3.6-3 (xorg-drivers xorg)
X.org dummy video driver
local/xf86-video-fbdev 0.4.3-3 (xorg-drivers xorg)
X.org framebuffer video driver
local/xf86-video-glint 1.2.8-3 (xorg-drivers xorg)
X.org GLINT/Permedia video driver
local/xf86-video-i128 1.3.6-3 (xorg-drivers xorg)
X.org Number 9 I128 video driver
local/xf86-video-intel 2.21.13-1 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-mach64 6.9.4-2 (xorg-drivers xorg)
X.org mach64 video driver
local/xf86-video-mga 1.6.2-3 (xorg-drivers xorg)
X.org mga video driver
local/xf86-video-modesetting 0.8.0-1 (xorg-drivers xorg)
X.org generic modesetting video driver
local/xf86-video-neomagic 1.2.7-5 (xorg-drivers xorg)
X.org neomagic video driver
local/xf86-video-nouveau 1.0.8-1 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards
local/xf86-video-nv 2.1.20-3 (xorg-drivers xorg)
X.org nv video driver
local/xf86-video-openchrome 0.3.3-1 (xorg-drivers xorg)
X.Org Openchrome drivers
local/xf86-video-r128 6.9.1-3 (xorg-drivers xorg)
X.org ati Rage128 video driver
local/xf86-video-savage 2.3.6-4 (xorg-drivers xorg)
X.org savage video driver
local/xf86-video-siliconmotion 1.7.7-3 (xorg-drivers xorg)
X.org siliconmotion video driver
local/xf86-video-sis 0.10.7-4 (xorg-drivers xorg)
X.org SiS video driver
local/xf86-video-tdfx 1.4.5-3 (xorg-drivers xorg)
X.org tdfx video driver
local/xf86-video-trident 1.3.6-4 (xorg-drivers xorg)
X.org Trident video driver
local/xf86-video-v4l 0.2.0-12 (xorg-drivers xorg)
X.org v4l video driver
local/xf86-video-vesa 2.3.2-3 (xorg-drivers xorg)
X.org vesa video driver
local/xf86-video-voodoo 1.2.5-3 (xorg-drivers xorg)
X.org 3dfx Voodoo1/Voodoo2 2D video driver
pacman -Qs 'dri$'
[fiendfan1@arch ~]$ pacman -Qs 'dri$'
local/catalyst-test 13.11-1
AMD/ATI testing/beta drivers, 13.11 beta 1. catalyst-hook + catalyst-utils +
lib32-catalyst-utils. Radeons HD 2 3 4 xxx ARE NOT SUPPORTED
local/intel-dri 9.1.5-1
Mesa drivers for Intel
local/nouveau-dri 9.1.5-1
Mesa drivers for Nouveau

[SOLVED] Problem with FGLRX and Ati HD4650

Hi! I'm fede1587 and I'm a new user of Archlinux (but not a new user of Linux). I love it and the KISS philosophy.
Four days ago I intalled the new version of Arch but unfortunately I have a very big problem and after 4 days of work I have not been able to solve it.
I have a Sony Vaio VGN-FW41J with a ATI HD4650. I need Ati proprietary drivers, because with the open source ones, the laptop become too hot. After installing the catalyst legacy pakages (234k, catalyst-utils and catalyst-hook) both from AUR and from the repository (following the great guide in ArchWiki) and configuring, when I lanunch startx, sometimes Gnome starts and sometimes I got black screen with horizontal lines.
I'm searching for solutions from 4 days and I read a lot of topic, and I try a lot of things, but nothing!
Accourding to the various threads, I have:
1) Load the module fglrx
2) Blacklist the radeon module
3) Re-run mkinitcpio
4) Run aticonfig --initial
5) Run aticonfig --acpi-services=off
6) Add nomodeset to grub
After I tried to change kernel (thinking about some incompatibilities). I installed linux-lts, and I try with this kernel, but I have the same issue. I also try whit Bridge Linux, but nothing changed.
This is the only output found in my error.log (Xorg.X.log is empty):
Aug 26 02:36:51 localhost kernel: [ 13.326922] [fglrx:KCL_MEM_VM_MapRegion] *ERROR* remap_pfn_range failed
Aug 26 02:36:51 localhost kernel: [ 13.326932] [fglrx:__create_mapping] *ERROR* Can not get virtual address
Aug 26 02:36:51 localhost kernel: [ 13.326935] [fglrx:__mc_heap_map_virtual_space] *ERROR* Failed to map the virtual space
Aug 26 02:36:51 localhost kernel: [ 13.326938] [fglrx:mc_heap_map_virtual_space] *ERROR* Can not get virtual address
Aug 26 02:36:51 localhost kernel: [ 13.326940] [fglrx:MCIL_GetVirtualAddressInDescriptor] *ERROR* Can not get the virtual address
Aug 26 02:36:55 localhost kernel: [ 16.622882] [fglrx:KCL_MEM_VM_MapRegion] *ERROR* remap_pfn_range failed
Aug 26 02:36:55 localhost kernel: [ 16.622892] [fglrx:__create_mapping] *ERROR* Can not get virtual address
Aug 26 02:36:55 localhost kernel: [ 16.622895] [fglrx:__mc_heap_map_virtual_space] *ERROR* Failed to map the virtual space
Aug 26 02:36:55 localhost kernel: [ 16.622898] [fglrx:mc_heap_map_virtual_space] *ERROR* Can not get virtual address
Aug 26 02:36:55 localhost kernel: [ 16.622900] [fglrx:MCIL_GetVirtualAddressInDescriptor] *ERROR* Can not get the virtual address
Aug 26 02:36:55 localhost dhcpcd[529]: wlan0: sendmsg: Cannot assign requested address
Aug 26 02:36:56 localhost kernel: [ 18.364335] [fglrx:KCL_MEM_VM_MapRegion] *ERROR* remap_pfn_range failed
Aug 26 02:36:56 localhost kernel: [ 18.364346] [fglrx:__create_mapping] *ERROR* Can not get virtual address
AuAug 26 02:40:18 localhost /usr/sbin/crond[452]: (CRON) INFO (Syslog will be used instead of sendmail.): File o directory non esistente
Aug 26 02:40:25 localhost dhcpcd[476]: wlan0: sendmsg: Cannot assign requested address
I hope you can help me, because I love this distro but I can't use it with the open source driver of the ATI card (too hot) :-(
Thanks a lot for the help and sorry for my bad english.
Last edited by fede1587 (2012-08-30 22:15:57)

Hi. Now I found in my Xorg.0.log the following lines:
[ 16.893] (II) fglrx(0): [uki] DRM interface version 1.0
[ 16.893] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 16.893] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x8000
[ 16.893] (II) fglrx(0): [uki] mapped SAREA 0x8000 to 0x7f82a04c9000
[ 16.893] (II) fglrx(0): [uki] framebuffer handle = 0x9000
[ 16.893] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 16.893] (II) fglrx(0): swlDriScreenInit done
[ 16.893] (II) fglrx(0): Kernel Module Version Information:
[ 16.893] (II) fglrx(0): Name: fglrx
[ 16.893] (II) fglrx(0): Version: 8.97.2
[ 16.893] (II) fglrx(0): Date: Jul 4 2012
[ 16.893] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 16.893] (II) fglrx(0): Kernel Module version matches driver.
[ 16.893] (II) fglrx(0): Kernel Module Build Time Information:
[ 16.893] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.4.9-1-ARCH
[ 16.893] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 16.893] (II) fglrx(0): Build-Kernel __SMP__: no
[ 16.893] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 16.893] (II) fglrx(0): [uki] register handle = 0x0000a000
[ 16.916] (EE) fglrx(0): Not enough video memory to allocate primary surface (frame buffer).
[ 16.916] (II) fglrx(0): Shutdown CMMQS
[ 16.916] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 16.916] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x8000 at 0x7f82a04c9000
[ 16.916] (WW) fglrx(0): ***********************************************************
[ 16.916] (WW) fglrx(0): * DRI initialization failed *
[ 16.916] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 16.916] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 16.916] (WW) fglrx(0): ***********************************************************
Do you have an idea of what it could be?
Thanks a lot...

[SOLVED] Tear Free feature on Catalyst 13.1 causes 30 fps

I've observed a strange thing with latest Catalyst drivers.
Version from old official packages catalyst-dkms-13.1-2 and catalyst-utils-13.1-5 works almost normally (on XServer 1.13.3).
But in later Catalyst versions, including catalyst-test-13.6-3 from AUR, Tear Free Desktop option causes 30 fps.
Without this option fps is normal (60 with VSync enabled), but causes unwanted effect in video and games.
Hardware: AMD Radeon HD 6450.
UPDATE: FPS with Tear Free is normal (60) in fullscreen windows.
Last edited by Misanthrop (2013-12-25 17:46:02)

This bug was fixed in Catalyst 13.12
http://support.amd.com/en-us/kb-article … Notes.aspx

Xmonad, xorg 1.9, and catalyst-test

Hi guys,
I'm running xorg 1.9 and catalyst-test on my HP Envy 15 (which contains a Radeon Mobility 5830.) Almost everything works; nothing strange appears in /var/log/Xorg.log or glxinfo. It's clear that my hardware acceleration is fine because I'm getting 200+ FPS in Extreme Tux Racer.
However, xmonad, of all things, is super-slow. When I switch workspaces or spawn tiled windows, the redraw lag is quite visible and I can see my CPU spike.
Amid other reports of X problems, I tried installing the backclear/catalyst-maximize-fix xserver packages from the catalyst repository, but those didn't seem to help. I also tried flipping the bit to enable XAA 2D acceleration, and that didn't seem to help either.
Any ideas as to why X doesn't seem to be accelerating this properly?

Yeeees, catalyst isn't supporting xserver 1.10 atm. Maybe 11.3 will support it, maybe.
Workaround is to:
- add xorg-server-* and xf86-input-* packages which you installed into pacman.conf's IgnorePkg list
- OR use [xorg19] repo - read wiki .

Xserver 3,1 and USB 3.0

I have a XServe 3,1 running OS X 10.7.5. I have connected USB 2.0 and FW800 drives to this machine with no issues. As of late, I have been using USB 3.0 external drives though. When I connect them the Xserve kernel panics and is unusable again until I unplug the drive. I have tried this with two different branded drives and have attached both of the reports from the kernel panic. What is interesting though is that I have other USB 3.0 drives that have connected with no issue. The USB 3.0 drives that I have connected and caused a kernel panic work fine on all other machines. Regardless, the following are the Crash Reports after the kernel panic. Any help is greatly appreciated.
Thanks
Interval Since Last Panic Report: 1290467 sec
Panics Since Last Report:          1
Anonymous UUID:                    872B069A-8356-4F34-8BB1-76AFDCDBE600
Wed May 8 09:29:44 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f809046d2, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0xffffff800f283a40, RCX: 0x00000000015d0000, RDX: 0xffffff800ea33f00
RSP: 0xffffff80b705baa0, RBP: 0xffffff80b705bae0, RSI: 0x00000000002a002a, RDI: 0xffffff800ea33f00
R8: 0x0000000000000158, R9: 0xffffff800f27f800, R10: 0x0000000000208c80, R11: 0x0000000000000000
R12: 0xffffff800ea33f10, R13: 0xffffff800f06c000, R14: 0xffffff800f262c00, R15: 0xffffff800f283a00
RFL: 0x0000000000010246, RIP: 0xffffff7f809046d2, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000000000, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b705b750 : 0xffffff8000220792
0xffffff80b705b7d0 : 0xffffff80002c4794
0xffffff80b705b980 : 0xffffff80002da55d
0xffffff80b705b9a0 : 0xffffff7f809046d2
0xffffff80b705bae0 : 0xffffff7f80909482
0xffffff80b705bb10 : 0xffffff7f80904f27
0xffffff80b705bb20 : 0xffffff7f817f9a4d
0xffffff80b705bb50 : 0xffffff800062a29d
0xffffff80b705bba0 : 0xffffff800062aace
0xffffff80b705bc20 : 0xffffff800062ae49
0xffffff80b705bc60 : 0xffffff800062b021
0xffffff80b705bca0 : 0xffffff8000622f8b
0xffffff80b705bce0 : 0xffffff7f8089ee05
0xffffff80b705bd10 : 0xffffff7f8089f61b
0xffffff80b705bdb0 : 0xffffff7f81767d15
0xffffff80b705bde0 : 0xffffff7f817686eb
0xffffff80b705be40 : 0xffffff7f8176829b
0xffffff80b705be60 : 0xffffff800062a29d
0xffffff80b705beb0 : 0xffffff800062aace
0xffffff80b705bf30 : 0xffffff800062ae49
0xffffff80b705bf70 : 0xffffff8000629a2f
0xffffff80b705bfb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(5.1)[71AF5A29-1AE2-3812-A0FF-96DD1CC6534D]@0xffffff 7f80888000->0xffffff7f808ddfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8086a000
         com.apple.iokit.IOSCSIArchitectureModelFamily(3.2.1)[5948254C-CBA8-34E3-B5B4-57 5E7D4C7BD1]@0xffffff7f80901000->0xffffff7f8092bfff
         com.apple.driver.AppleUSBComposite(5.0)[64C51F06-5AFA-3057-99EA-D32EF21C5278]@0 xffffff7f81767000->0xffffff7f8176cfff
            dependency: com.apple.iokit.IOUSBFamily(5.1.0)[71AF5A29-1AE2-3812-A0FF-96DD1CC6534D]@0xffff ff7f80888000
         com.apple.iokit.IOUSBAttachedSCSI(1.0.2)[77CC5104-DADF-31A3-B28D-4D9E00435EB7]@ 0xffffff7f817f7000->0xffffff7f81802fff
            dependency: com.apple.iokit.IOUSBFamily(5.1.0)[71AF5A29-1AE2-3812-A0FF-96DD1CC6534D]@0xffff ff7f80888000
            dependency: com.apple.iokit.IOStorageFamily(1.7.2)[40D4AB21-F11E-3C6C-8883-3554F93A251F]@0x ffffff7f807aa000
            dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.2.1)[5948254C-CBA8-34E3-B5B4-57 5E7D4C7BD1]@0xffffff7f80901000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: Xserve3,1 (Mac-F223BEC8)
System uptime in nanoseconds: 2457593815
last loaded kext at 612368715: com.apple.iokit.IOUSBAttachedSCSI          1.0.2 (addr 0xffffff7f817f7000, size 49152)
loaded kexts:
com.apple.iokit.IOUSBAttachedSCSI          1.0.2
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AppleIntel8254XEthernet          2.1.3b1
com.apple.driver.Intel82574L          2.2.0b3
com.apple.driver.AppleRAIDCard          209
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleUSBUHCI          5.1.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.iokit.IOUSBMassStorageClass          3.0.3
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOSCSIParallelFamily          2.5.1
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.driver.AppleKeyswitch          1.0.5f4
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.9
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
Model: Xserve3,1, BootROM XS31.0081.B04, 4 processors, Quad-Core Intel Xeon, 2.26 GHz, 6 GB, SMC 1.43f4
Graphics: NVIDIA GeForce GT 120, NVIDIA GeForce GT 120, PCIe, 256 MB
Memory Module: CPUA/A1, 2 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142353637334448312D4346382020
Memory Module: CPUA/A2, 2 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142353637334448312D4346382020
Memory Module: CPUA/A3, 2 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142353637334448312D4346382020
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GT 120, sppci_displaycontroller, MXM-Slot
Serial ATA Device: OPTIARC DVD RW AD-5670S
Serial ATA Device: APPLE SSD SM128, 121.33 GB
USB Device: Frontpanel Controller, apple_vendor_id, 0x8261, 0x3d100000 / 2
FireWire Device: Rugged FW USB3, LaCie, 800mbit_speed
Interval Since Last Panic Report: 8968402 sec
Panics Since Last Report:          2
Anonymous UUID:                    872B069A-8356-4F34-8BB1-76AFDCDBE600
Mon Aug 5 16:13:36 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f808c46d2, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0xffffff8012bc3bc0, RCX: 0x00000000011f0000, RDX: 0xffffff800ef0af00
RSP: 0xffffff80b878baa0, RBP: 0xffffff80b878bae0, RSI: 0x0000000000360036, RDI: 0xffffff800ef0af00
R8: 0x0000000000000158, R9: 0xffffff8011c44400, R10: 0x0000000000008000, R11: 0xffffff80002dad60
R12: 0xffffff800ef0af10, R13: 0xffffff8011430600, R14: 0xffffff8011c7f000, R15: 0xffffff8012bc4f80
RFL: 0x0000000000010246, RIP: 0xffffff7f808c46d2, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000000, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b878b750 : 0xffffff8000220792
0xffffff80b878b7d0 : 0xffffff80002c4794
0xffffff80b878b980 : 0xffffff80002da55d
0xffffff80b878b9a0 : 0xffffff7f808c46d2
0xffffff80b878bae0 : 0xffffff7f808c9482
0xffffff80b878bb10 : 0xffffff7f808c4f27
0xffffff80b878bb20 : 0xffffff7f817cba4d
0xffffff80b878bb50 : 0xffffff800062a29d
0xffffff80b878bba0 : 0xffffff800062aace
0xffffff80b878bc20 : 0xffffff800062ae49
0xffffff80b878bc60 : 0xffffff800062b021
0xffffff80b878bca0 : 0xffffff8000622f8b
0xffffff80b878bce0 : 0xffffff7f8085ee05
0xffffff80b878bd10 : 0xffffff7f8085f61b
0xffffff80b878bdb0 : 0xffffff7f81735d15
0xffffff80b878bde0 : 0xffffff7f817366eb
0xffffff80b878be40 : 0xffffff7f8173629b
0xffffff80b878be60 : 0xffffff800062a29d
0xffffff80b878beb0 : 0xffffff800062aace
0xffffff80b878bf30 : 0xffffff800062ae49
0xffffff80b878bf70 : 0xffffff8000629a2f
0xffffff80b878bfb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(5.1)[71AF5A29-1AE2-3812-A0FF-96DD1CC6534D]@0xffffff 7f80848000->0xffffff7f8089dfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082a000
         com.apple.iokit.IOSCSIArchitectureModelFamily(3.2.1)[5948254C-CBA8-34E3-B5B4-57 5E7D4C7BD1]@0xffffff7f808c1000->0xffffff7f808ebfff
         com.apple.driver.AppleUSBComposite(5.0)[64C51F06-5AFA-3057-99EA-D32EF21C5278]@0 xffffff7f81735000->0xffffff7f8173afff
            dependency: com.apple.iokit.IOUSBFamily(5.1.0)[71AF5A29-1AE2-3812-A0FF-96DD1CC6534D]@0xffff ff7f80848000
         com.apple.iokit.IOUSBAttachedSCSI(1.0.2)[77CC5104-DADF-31A3-B28D-4D9E00435EB7]@ 0xffffff7f817c9000->0xffffff7f817d4fff
            dependency: com.apple.iokit.IOUSBFamily(5.1.0)[71AF5A29-1AE2-3812-A0FF-96DD1CC6534D]@0xffff ff7f80848000
            dependency: com.apple.iokit.IOStorageFamily(1.7.2)[40D4AB21-F11E-3C6C-8883-3554F93A251F]@0x ffffff7f807aa000
            dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.2.1)[5948254C-CBA8-34E3-B5B4-57 5E7D4C7BD1]@0xffffff7f808c1000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: Xserve3,1 (Mac-F223BEC8)
System uptime in nanoseconds: 86462620463
last loaded kext at 86345993578: com.apple.iokit.IOUSBAttachedSCSI          1.0.2 (addr 0xffffff7f817c9000, size 49152)
loaded kexts:
com.Cycling74.driver.Soundflower          1.5.1
com.apple.iokit.IOUSBAttachedSCSI          1.0.2
com.apple.driver.AppleUSBCDC          4.1.22
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.GeForce          7.3.2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.AppleBMC          2.0.2
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.Apple16X50ACPI          3.0
com.apple.driver.AppleSEP          1.5.0
com.apple.driver.XsanFilter          404
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AppleIntel8254XEthernet          2.1.3b1
com.apple.driver.Intel82574L          2.2.0b3
com.apple.driver.AppleRAIDCard          209
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleUSBUHCI          5.1.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.iokit.IOUSBMassStorageClass          3.0.3
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.kext.triggers          1.0
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.nvidia.nv50hal          7.3.2
com.apple.nvidia.nvGK100hal          7.3.2
com.apple.iokit.IOSurface          80.0.2
com.apple.nvidia.nvGF100hal          7.3.2
com.apple.NVDAResman          7.3.2
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.driver.Apple16X50Serial          3.0
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.AppleFileSystemDriver          13
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOSCSIParallelFamily          2.5.1
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.driver.AppleKeyswitch          1.0.5f4
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
Model: Xserve3,1, BootROM XS31.0081.B04, 4 processors, Quad-Core Intel Xeon, 2.26 GHz, 6 GB, SMC 1.43f4
Graphics: NVIDIA GeForce GT 120, NVIDIA GeForce GT 120, PCIe, 256 MB
Memory Module: CPUA/A1, 2 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142353637334448312D4346382020
Memory Module: CPUA/A2, 2 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142353637334448312D4346382020
Memory Module: CPUA/A3, 2 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142353637334448312D4346382020
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GT 120, sppci_displaycontroller, MXM-Slot
Serial ATA Device: OPTIARC DVD RW AD-5670S
Serial ATA Device: APPLE SSD SM128, 121.33 GB
USB Device: Frontpanel Controller, apple_vendor_id, 0x8261, 0x3d100000 / 2

Quick summary:
It fails on all ports
It fails on multiple xServes
It fails on 10.7.5 and 10.8.5 both fully patched and up to date.
It works on iMac 10.7.5 fully patched. Appears to be xServes only that are affected.
It will kernel panic the OS on boot, seconds in.
It does not affect the early boot screen.
It is possible to boot from the drive using a 10.7 installer image.
It works with 10.6.8
It is most likely USB kexts that are the problem. It may work with older versions of 10.7/10.8. It might be possible to copy kexts from older to newer versions and get it working.
I recommend everyone affected to log fault with Apple, along with the details of the drives. It looks to be multiple model drives and multiple drive vendors.

Few days before I brought one iphone 5 by second party and this phone make a unlock but it sometime have a cellular network most of time say no service can u solve this problem please and I put serial number it say this phone is replace can u help me for

Few days before I brought one iphone 5 by second party and this phone make a unlock but it sometime have a cellular network most of time say no service can u solve this problem please and I put serial number it say this phone is replace can u help me for original serial number....

If Apple's service database says that your iPhone was replaced, then Apple will no longer provide any service for that phone.
First, get a new SIM from your cell carrier and see if that corrects the problem. If it does not, try the usual steps for addressing software problems: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If you try restoring from a backup and that doesn't fix the problem, try restoring to factory settings and, if the problem goes away, then sync back your apps and content. You'll lose the app data and settings, but if the problem is due to a corrupt cache or settings file, restoring to factory settings should cure it.
If none of that helps, your device may have developed a hardware fault. Again, Apple will provide no service for it, so you will need to pay some independent repair shop to fix your iPhone.
Regards.

No GLX on latest kernel, X, and catalyst

local/catalyst 11.7-1
local/catalyst-utils 11.6-1
local/lib32-catalyst-utils 11.6-1 (lib32)
local/xorg-server 1.10.3.901-1 (xorg)
local/linux 3.0.1-1 (base)
01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4870]
[max@gayforcetwo Steam]$ glxinfo
name of display: :0.0
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 18
Current serial number in output stream: 18
[max@gayforcetwo Steam]$ fglrxinfo
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 18
Current serial number in output stream: 18
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
What's going on?
Last edited by synthead (2011-08-11 17:53:31)

I don't know how you updated, but I use the catalyst repository, and in the last big update, there was an issue in the order of installing linux 3 and catalyst 11.7 (?), such that the fglrx hook failed. I had to redo building the image, whereupon the hook worked. Did you check for messages as it rebuilt the image?
Sorry if this was obvious, but I am not arch-guts/catalyst savvy.
HTH

ATI Catalyst Install Manager and catalyst Control Center Help

I just run the Windows 7 Upgrade
advisor report and it said that I should uninstall the ATI Catalyst Install Manager and Catalyst Control Center then reinstall after upgrade..
Could someone direct me where I might t find these programs for Windows 7

You must not do this. Just continue upgrade installation.
On my Satellite I got the same message but I have simply continued with upgrade.
At the end everything went fine.

LMS 3.2 and Catalyst 4500 WS-X4648-RJ45-E module card

Hi all,
I have a rpoblem with a specific client with LMS 3.2. We are using LMS 3.2 on Windows 2008 and everything seem to be working OK. The issue is in the CiscoView with the 4500 switches. CiscoView can see the supervisors on all 4500 switches (6); but cannot see the switchcards when the switchcards are WS-X4648-RJ45-E. Find the sh inv output below:
CSR-D1#sh inventory
NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4507R-E 7 slot switch "
PID: WS-C4507R-E       , VID: V01, SN: FOX1152GKR1
NAME: "Clock Module", DESCR: "Clock Module"
PID: WS-X4K-CLOCK-E    , VID: V01, SN: JAE120354DD
NAME: "Linecard(slot 1)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 baseT "
PID: WS-X4648-RJ45-E   , VID: V01, SN: JAE14410NLT
NAME: "Linecard(slot 2)", DESCR: "6 Dual media SFP or 10/100/1000BaseT (RJ45)V voice power ports (Cisco/IEEE)"
PID: WS-X4506-GB-T     , VID: V05, SN: JAE120351NC
NAME: "Linecard(slot 3)", DESCR: "Supervisor 6-E 10GE (X2), 1000BaseX (SFP) with 2 10GE X2 ports"
PID: WS-X45-SUP6-E     , VID: V01, SN: JAE120576HG
NAME: "TenGigabitEthernet3/1", DESCR: "10Gbase-LRM"
PID: FTLX1341E2-C1     , VID: A , SN: FNS1352175M
NAME: "TwinGig Converter 3/2", DESCR: "TwinGig Converter Module"
PID: 800-27645-01      , VID: A0 , SN: CAT1147H2WK
NAME: "Linecard(slot 4)", DESCR: "Supervisor 6-E 10GE (X2), 1000BaseX (SFP) with 2 10GE X2 ports"
PID: WS-X45-SUP6-E     , VID: V07, SN: JAE14080NL2
NAME: "TwinGig Converter 4/2", DESCR: "TwinGig Converter Module"
PID: 800-27645-01      , VID: A0 , SN: CAT1147H2BV
NAME: "Linecard(slot 7)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 baseT "
PID: WS-X4648-RJ45-E   , VID: V01, SN: JAE14420A2F
I have updated the s/w to 12.2(53) SG1 with no luck.
Any ideas?

Hi Nicos,
I have exactly the same issue with LMS 3.2 CiscoView under Windows 2003 and catalyst switch 4506-E.
4506-E are in IOS 12.2(53)SG2.
I installed latest 4500IOS V 19.0 ciscoview device package without success.
Did you fix your problem ?

Dacl on ACS 5.1 and Catalyst switch 3560

Dear all
I have ACS 5.1 and Catalyst switch 3560 with version 12.2(53)SE. I configure a dacl on the ACS and I use it on authorization profile.
This authrization profile is used on access policy.
I tried the authentication but it doesn't work. I checked the ACS logs and I found that the user is authenicated successfuly but the dacl gives this error (The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected)
Steps:
11001 Received RADIUS Access-Request
11017 RADIUS created a new session
11025 The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected
11003 Returned RADIUS Access-Reject
DACL:
deny ip host 1.2.3.4 1.2.3.0 0.0.0.255 log
permit ip any any log
Thanks on advance,

Dear Tiago
I applied the command "radius-server vsa send". Now I can see the dacl is applied but I can't see it on the switch and even the authentication is succueeded ont the ACS logs but it give me unauthoized on the switchport. You can see the logs( started with the username acstest and the access-list is applied but it doesn't work and you can see theat it goes for mab after eap timed out). I hope you can help on this issue.
Dec 13,10 10:29:00.513 AM
00-23-AE-7A-58-A6
00-23-AE-7A-58-A6
Default Network Access
Lookup
Dot1x-3560-Switch
1.2.3.4
FastEthernet0/5
TESTACS
22056 Subject not found in the applicable identity store(s).
Dec 13,10 10:28:29.186 AM
#ACSACL#-IP-Guest-4cfcc14d
Dot1x-3560-Switch
1.2.3.4
TESTACS
Dec 13,10 10:28:28.726 AM
acstest
00-23-AE-7A-58-A6
Default Network Access
PEAP (EAP-MSCHAPv2)
Dot1x-3560-Switch
1.2.3.4
FastEthernet0/5
TESTACS
Thanks,

Radeon HD 7970 Graphics Drivers and Catalyst 12.11 Software for OS X 10.8.2 Mountain Lion

Need graphics drivers and Catalyst 12.11 Software for OS X 10.8.2 Mountain Lion (to support Radeon HD 7970 Graphics cards)
Operating System
-64-bit, OS X 10.8.2
Graphics Cards (all twelve)
XFX Double D Radeon HD 7970 (FX797ATDFC)
XFX Double D Radeon HD 7970 Black Edition (FX797ATDBC)
XFX Double D Radeon HD 7970 GHz Edition (FX797GTDFC) **
Diamond Radeon HD 7970 (7970PE53G)
Diamond Radeon HD 7970 GHz Edition (7970PE53GHZ) **
Diamond Radeon HD 7970 Double Black Diamond Edition (7970PE53GDD)
ASUS Radeon HD 7970 (HD7970-DC2-3GD5)
ASUS Radeon HD 7970 GHz Edition (MATRIX-HD7970-P-3GD5)
SAPPHIRE Vapor-X Radeon HD 7970 GHz Edition (100351VXSR)
SAPPHIRE Radeon HD 7970 (100351SR)
GIGABYTE Radeon HD 7970 (GV-R797OC-3GD)
MSI Radeon HD 7970 (R7970)
Please also add graphics and hardware acceleration for H.264/H.265, and OpenCL

Love these year old threads.
Flashing is what some other sites specialize in, or even troubleshooting non-Apple cards.
There is an AMD Mac Edition 7950. Now. As well as EVGA GTX 680.
All of those were tested and reported on by Barefeats - back in March-May 2013.
Apple? not interested in PC cards other than they have quietly added more driver support in 10.8.3 and especially above. Not in 10.8.2.
Be interesting to see what Maverick support provides as far as GPUs.
And netkas and others are up on PC graphic cards, not Apple, even if they don't write drivers, they do often write how to flash a PC card and support. Apple and this discussion, no.

[Solved] XServer 1.13 and Catalyst...

Similar Messages

Maybe you are looking for