[Solved] xset dpms force off not working

With the latest kernel 'xset dpms force off' is not working, now it makes my screen blink (off/on in one sec).
With 'sleep 2 && xset dpms force off' and 'sleep 2; xset dpms force off' I got the same result.
vbetool works.
Last edited by irtigor (2011-07-16 03:48:39)

I finally found a way to fix it. With the lastest kernel versions the module topstar_laptop sends a event that
get in the way:
kernel: [43419.820250] topstar_laptop: unknown event = 0x82
Module added to blacklist and until now everything working as should be.

Similar Messages

[SOLVED] DPMS screen off not working with xorg 1.16.0, gnome 3

After the update of xorg into 1.16.0-2, screen is not turned off by DPMS in GNOME.
I also tried an manual command:
$ xset dpms force off
but it's not working.
In other WM, this command is working.
With xorg 1.15.2 and gnome 3, there is not this problem.
When I entered the command, the screen turned off for a couple of seconds and turned back on.
Last edited by esrevinu (2014-07-22 23:35:07)

Updating xf86-video-intel to 2.99.912-4 solved the problem.
Thanks.

"sleep 1; xset dpms force off" doesn't turn backlight off

I have a 13'' Macbook Pro connected to a 24'' Apple Cinema Display LED monitor and I'm running a XFCE as DE, and running the nvidia-beta + nvidia-utils-beta from AUR. I'm using the external monitor as the main screen and the MBP display turned off. I don't have a separate screensaver installed.
Until a couple of months ago issuing 'sleep 1; xset dpms force off' would turn the backlight of the Apple Cinema Display off, which is how I like it. Now however the backlight switches off for a second, switches on again showing a blank (black with backlight on) screen. I experimented with the xset screensaver settings (xset s ...) but none enable me to turn the backlight off.
output of 'xset q' :
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000002
XKB indicators:
00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 660 repeat rate: 25
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 1/10 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0x0 WhitePixel: 0xffffff
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,built-ins
DPMS (Energy Star):
Standby: 600 Suspend: 600 Off: 600
DPMS is Enabled
With the Apple Cinema Display disconnected and using only the laptop monitor 'sleep 1; xset dpms force off' does turn the backlight off. So it seems to be something about using the external monitor.
Last edited by rwd (2012-11-01 20:23:26)

Thank you! Nice to know I am not alone. Googling has brought me nothing, though it's difficult to pinpoint discussions about something like this, as users may not know enough to work out what the problem is and not even mention DPMS!
Anyway, my setup consists of an i7 running on an X58A board with an ATi 5850 card using the radeon driver, from testing, not git. System is fully up to date with testing enabled, X has little manual configuration besides telling it what driver to use.
I should mention that prior to this, I was using the fglrx driver, and had a similar but different problem. With the fglrx driver, when using DPMS, after an undetermined time, could be minutes, could be hours, X would peg the CPU and become unresponsive, not even able to change to another VT. Another issue difficult to google as a lot of users wouldn't know to ssh in to have a poke round. I switched to radeon in an effort to get rid of this problem, only to have it replaced with another!
Neither times did anything out of the ordinary turn up in any logs. Frustrated isn't the word! For now I have turned off monitor power saving in KDE though this isn't ideal
EDIT: Turning off monitor power saving in KDE didn't work, so I have no added
Section "ServerFlags"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
to /etc/X11/xorg.conf.d/10-xorg.conf
Of course, I'd like to be able to use DPMS! Anyone have any ideas how this can be rectified?
Last edited by LadFromWales (2012-02-26 13:54:51)

DPMS/Screen blanking not working in gnome-shell

The title pretty much sums it up. I've tried setting screen blanking in gnome-control-center->power, but it doesn't seem to work. However DPMS has worked in pretty much every other WM I've tried by default.
I've installed gnome-shell and gnome-control-center. Not using gdm.
I've tried 'xset -dpms' which apparently should've helped at least in earlier gnome releases, but it makes no difference on my system.
Any ideas what could be causing this?

\hbar wrote:
Could you be more specific so as to what does not work? Is it the automatic screen blanking, or just plain screen blanking? If you run
xset dpms force off
does the screen turn off?
I want my screen to turn off automatically when system is not in use, so I've enabled the automatic screen blanking from gnome settings.
That command turns my monitor off fine, but doesn't happen automatically when system is idle like it does in other WMs
\hbar wrote:Also 'xset -dpms' disables dpms, so I don't understand how that would help.
Apparently there's been an issue where xserver's dpms settings get in gnome's way, and disabling dpms with xset has helped some people in arch forums and others. Although if I'm not mistaken that issue should be fixed already.

My phone fell down on the floor and shutt off not working again

my phone fell down on the floor and shutt off not working again

what i should do to know the phone has damaged,
Try the steps here for the appropriate symptoms.
http://support.apple.com/kb/TS2802
If you are unable to get the iPhone working, it's almost certainly damaged. Take or send it to Apple for a definite diagnosis.
how much fees for replacement ??
If you have AppleCare+ coverage, the cost will low; in the US it's $49. If you do not have AppleCare+ on your iPhone, see the Service Pricing section here:
http://www.apple.com/support/iphone/service/faq/
Regards.

Hand off not working on iPhone 5

hand off not working between iPhone and iPad Air.
Any suggestion. both using same iCloud ID's
thanks

Hi there SZkiyani,
You may need to verify that Bluetooth is enabled on the devices as well. Take a look at the aritlce below for more information.
Connect your iPhone, iPad, and iPod touch using Continuity
Use Handoff with Apple apps such as Mail, Safari, Pages, Numbers, Keynote, Maps, Messages, Reminders, Calendar, Contacts. You can also use Handoff with some third-party apps. Start a document, email, or message on one device and pick up where you left off on another device.
To use Handoff:
On both devices, you'll need to turn on Bluetooth and sign in to the same iCloud account.
Use one of the apps listed above on one of your devices.
-Griff W.

SOLVED: Can't blank/lock screen after 30 mins - xset s off not working

I want the monitor screen to blank after 30 minutes of idleness and password lock it. The password lock works fine, but the screen blanks after 10 minutes.
Here is what I have in my ~/.xinitrc
xset s off &
xset dpms 0 1800 3600 &
xautolock -time 30 -locker slock -notify 30 &
Is there something I overlooked?
Last edited by bpont (2011-12-17 18:02:47)

karol wrote:
Not sure what's wrong with your setup, works for me:
[karol@black ~]$ xset s default
[karol@black ~]$ xset -q | grep -A2 "Screen Saver"
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
[karol@black ~]$ xset s off
[karol@black ~]$ xset -q | grep -A2 "Screen Saver"
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 600
For some reason you're using the default timeout even though you have 'xset s off &' in your .xinitrc.
I don't know what exactly 'xautolock -time 30 -locker slock -notify 30 &' does, try commenting it out and see if it changes anything.
If you're still stuck, post the whole ~/.xinitrc.
I did your above test which gave me the same results as you. The thing is, whenever I reboot, that setting will be lost.
I think what I'll try next is moving the xset s off command from ~/.xinitrc into ~/.fluxbox/startup
I will leave xautolock -time 30 -locker slock -notify 30 & in ~/.xinitrc for now. By the way, what that line does is lock my display after 30 minutes using the 'slock' package and notifies me with a 30 second system alarm warning before it does so. That way I can press my keyboard or move my mouse to avoid locking my display.
Edit: Actually, what I ended up doing was simply changing the ordering of commands in my ~/.xinitrc from:
xset s off &
xset dpms 0 1800 3600 &
xautolock -time 30 -locker slock -notify 30 &
to
xset dpms 0 1800 3600 &
xset s off &
xautolock -time 30 -locker slock -notify 30 &
and that solved the problem by changing the timeout to 0...not really sure why the ordering of commands matters here, but it worked so I'm changing this thread to SOLVED.
Karol, thanks for your help in troubleshooting this with me.
Last edited by bpont (2011-12-17 18:02:08)

[SOLVED] - xset at startup doesn't work

I use the following command to set my screensaver options
xset dpms 30 60 300
After reading the Arch wiki, I found out that this can be made permanent by adding this to the xorg.conf or putting it in ~/.xprofile
Contents of xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Tue Dec 8 21:04:28 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "StandbyTime" "2"
Option "SuspendTime" "3"
Option "OffTime" "5"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Dell Inspiron 1520 WXGA+ LCD"
VendorName "Dell"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "CircularScrolling" "1"
Option "CircScrollTrigger" "0"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
Option "BlankTime" "0.1"
Option "StandbyTime" "0.5"
Option "SuspendTime" "1"
Option "OffTime" "5"
EndSection
Contents of ~/.xprofile
xset dpms 30 60 300
I even added this to crontab
0 * * * * ~/Wallpapers/change-background-folder.py
0 * * * * /usr/bin/xset s 30
0 * * * * /usr/bin/xset dpms 60 120 300
@reboot ID=screensaver AFTER=2m /usr/bin/xset s 30
@reboot ID=monitor AFTER=2m /usr/bin/xset dpms 60 120 300
@reboot ID=vu AFTER=1m vuze
Still after doing all this, when I give xset q after a reboot, I get
[theta@boolean-pc ~]$ xset q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
XKB indicators:
00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 30
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 3/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
Font cache:
Server does not have the FontCache Extension
The parameters are still all 0.
Please suggest a solution.
Apoorv
Last edited by theta (2011-08-02 15:56:06)

jasonwryan wrote:
If you have set up your .xinitrc the way karol suggests and it still doesn't work, you could delay it kicking in until X has finished loading
(sleep 15s && xset dpms 30 60 300) &
exec yourwm
That may get around the problem bernarcher describes...
Thank you! This works very well for me.
It's the only way I can get it to work.
For the records, so the smart people can find the problem, here is my xorg.conf:
Section "ServerLayout"
Identifier "ServerLayout0"
Screen 0 "BenQ" 0 0
#Option "BlankTime" "0"
Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "30"
EndSection
Section "Screen"
Identifier "BenQ"
Device "Intel4000"
Monitor "HDMI2"
DefaultDepth 24
SubSection "Display"
#Depth "24"
EndSubSection
EndSection
Section "Monitor"
Identifier "HDMI2"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Intel4000"
Driver "intel"
BusID "PCI:0:2:0"
Option "AccelMethod" "sna"
Option "TearFree" "true"
EndSection
# Read and parsed by systemd-localed. It's probably wise not to edit this manually too freely.
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "se"
EndSection
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Xorg seems to not care about my settings in xorg.conf and sets DPMS values to "0":
$ xset -q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000002
XKB indicators:
00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 33
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 0
Colors:
default colormap: 0x22 BlackPixel: 0x0 WhitePixel: 0xffffff
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
And the xorg log:
[ 17738.153]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 17738.194] X Protocol Version 11, Revision 0
[ 17738.208] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 17738.223] Current Operating System: Linux arch6 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64
[ 17738.223] Kernel command line: console=tty0 xen-pciback.hide=(01:00.0)(01:00.1)(03:00.0)(02:00.0)(00:14.0)(00:1d.0) root=/dev/VG/Aroot rw
[ 17738.254] Build Date: 14 April 2014 08:39:09AM
[ 17738.269]
[ 17738.285] Current version of pixman: 0.32.4
[ 17738.314] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17738.314] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17738.375] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 29 22:10:19 2014
[ 17738.390] (==) Using config file: "/etc/X11/xorg.conf"
[ 17738.406] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17738.406] (==) ServerLayout "ServerLayout0"
[ 17738.406] (**) |-->Screen "BenQ" (0)
[ 17738.406] (**) | |-->Monitor "HDMI2"
[ 17738.406] (**) | |-->Device "Intel4000"
[ 17738.406] (**) Option "StandbyTime" "10"
[ 17738.406] (**) Option "SuspendTime" "20"
[ 17738.406] (**) Option "OffTime" "30"
[ 17738.406] (==) Automatically adding devices
[ 17738.406] (==) Automatically enabling devices
[ 17738.406] (==) Automatically adding GPU devices
[ 17738.406] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17738.406] Entry deleted from font path.
[ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 17738.406] Entry deleted from font path.
[ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 17738.406] Entry deleted from font path.
[ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 17738.406] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 17738.406] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17738.406] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17738.406] (II) Loader magic: 0x804c80
[ 17738.406] (II) Module ABI versions:
[ 17738.406] X.Org ANSI C Emulation: 0.4
[ 17738.406] X.Org Video Driver: 15.0
[ 17738.406] X.Org XInput driver : 20.0
[ 17738.406] X.Org Server Extension : 8.0
[ 17738.406] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17738.408] (--) PCI:*(0:0:2:0) 8086:0162:1458:d000 rev 9, Mem @ 0xf4400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
[ 17738.408] (--) PCI: (0:1:0:0) 1002:67b1:1002:0b00 rev 0, Mem @ 0xd0000000/268435456, 0xe0000000/8388608, 0xf4b00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 17738.408] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 17738.424] Initializing built-in extension Generic Event Extension
[ 17738.439] Initializing built-in extension SHAPE
[ 17738.454] Initializing built-in extension MIT-SHM
[ 17738.468] Initializing built-in extension XInputExtension
[ 17738.482] Initializing built-in extension XTEST
[ 17738.495] Initializing built-in extension BIG-REQUESTS
[ 17738.509] Initializing built-in extension SYNC
[ 17738.523] Initializing built-in extension XKEYBOARD
[ 17738.536] Initializing built-in extension XC-MISC
[ 17738.548] Initializing built-in extension SECURITY
[ 17738.561] Initializing built-in extension XINERAMA
[ 17738.573] Initializing built-in extension XFIXES
[ 17738.585] Initializing built-in extension RENDER
[ 17738.597] Initializing built-in extension RANDR
[ 17738.608] Initializing built-in extension COMPOSITE
[ 17738.620] Initializing built-in extension DAMAGE
[ 17738.631] Initializing built-in extension MIT-SCREEN-SAVER
[ 17738.643] Initializing built-in extension DOUBLE-BUFFER
[ 17738.654] Initializing built-in extension RECORD
[ 17738.665] Initializing built-in extension DPMS
[ 17738.677] Initializing built-in extension Present
[ 17738.688] Initializing built-in extension DRI3
[ 17738.700] Initializing built-in extension X-Resource
[ 17738.711] Initializing built-in extension XVideo
[ 17738.722] Initializing built-in extension XVideo-MotionCompensation
[ 17738.734] Initializing built-in extension XFree86-VidModeExtension
[ 17738.746] Initializing built-in extension XFree86-DGA
[ 17738.757] Initializing built-in extension XFree86-DRI
[ 17738.769] Initializing built-in extension DRI2
[ 17738.769] (II) "glx" will be loaded by default.
[ 17738.769] (II) LoadModule: "dri2"
[ 17738.769] (II) Module "dri2" already built-in
[ 17738.769] (II) LoadModule: "glamoregl"
[ 17738.769] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 17738.770] (II) Module glamoregl: vendor="X.Org Foundation"
[ 17738.770] compiled for 1.15.0, module version = 0.6.0
[ 17738.770] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17738.770] (II) LoadModule: "glx"
[ 17738.770] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17738.770] (II) Module glx: vendor="X.Org Foundation"
[ 17738.770] compiled for 1.15.1, module version = 1.0.0
[ 17738.771] ABI class: X.Org Server Extension, version 8.0
[ 17738.771] (==) AIGLX enabled
[ 17738.782] Loading extension GLX
[ 17738.782] (II) LoadModule: "intel"
[ 17738.782] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 17738.782] (II) Module intel: vendor="X.Org Foundation"
[ 17738.783] compiled for 1.15.0, module version = 2.99.911
[ 17738.783] Module class: X.Org Video Driver
[ 17738.783] ABI class: X.Org Video Driver, version 15.0
[ 17738.783] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 17738.783] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 17738.783] (++) using VT number 1
[ 17738.783] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 17738.783] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 17738.783] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 17738.783] (==) intel(0): RGB weight 888
[ 17738.783] (==) intel(0): Default visual is TrueColor
[ 17738.783] (**) intel(0): Option "AccelMethod" "sna"
[ 17738.783] (**) intel(0): Option "TearFree" "true"
[ 17738.783] (**) intel(0): Framebuffer tiled
[ 17738.784] (**) intel(0): Pixmaps tiled
[ 17738.784] (**) intel(0): "Tear free" enabled
[ 17738.784] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 17738.784] (II) intel(0): Output VGA1 using monitor section HDMI2
[ 17738.784] (II) intel(0): Output HDMI1 has no monitor section
[ 17738.784] (II) intel(0): Output DP1 has no monitor section
[ 17738.784] (II) intel(0): Output HDMI2 using monitor section HDMI2
[ 17738.784] (II) intel(0): Output DP2 has no monitor section
[ 17738.784] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 17738.784] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 0
[ 17738.784] (==) intel(0): DPI set to (96, 96)
[ 17738.784] (II) Loading sub module "dri2"
[ 17738.784] (II) LoadModule: "dri2"
[ 17738.784] (II) Module "dri2" already built-in
[ 17738.784] (==) Depth 24 pixmap format is 32 bpp
[ 17738.784] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 17738.784] (==) intel(0): Backing store enabled
[ 17738.784] (==) intel(0): Silken mouse enabled
[ 17738.784] (II) intel(0): HW Cursor enabled
[ 17738.784] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 17738.784] (**) intel(0): DPMS enabled
[ 17738.784] (II) intel(0): [DRI2] Setup complete
[ 17738.784] (II) intel(0): [DRI2] DRI driver: i965
[ 17738.784] (II) intel(0): [DRI2] VDPAU driver: i965
[ 17738.784] (II) intel(0): direct rendering: DRI2 Enabled
[ 17738.784] (==) intel(0): hotplug detection: "enabled"
[ 17738.784] (--) RandR disabled
[ 17738.789] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 17738.789] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 17738.789] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 17738.789] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 17738.789] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 17738.789] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 17738.789] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 17738.789] (II) AIGLX: Loaded and initialized i965
[ 17738.789] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 17738.791] (II) intel(0): switch to mode [email protected] on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
[ 17738.801] (II) intel(0): Setting screen physical size to 508 x 285
[ 17738.839] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 17738.839] (**) Power Button: Applying InputClass "system-keyboard"
[ 17738.839] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17738.839] (II) LoadModule: "evdev"
[ 17738.839] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 17738.840] (II) Module evdev: vendor="X.Org Foundation"
[ 17738.840] compiled for 1.15.0, module version = 2.8.2
[ 17738.840] Module class: X.Org XInput Driver
[ 17738.840] ABI class: X.Org XInput driver, version 20.0
[ 17738.840] (II) Using input driver 'evdev' for 'Power Button'
[ 17738.840] (**) Power Button: always reports core events
[ 17738.840] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 17738.840] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17738.840] (--) evdev: Power Button: Found keys
[ 17738.840] (II) evdev: Power Button: Configuring as keyboard
[ 17738.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 17738.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 17738.840] (**) Option "xkb_rules" "evdev"
[ 17738.840] (**) Option "xkb_model" "pc104"
[ 17738.840] (**) Option "xkb_layout" "se"
[ 17738.870] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 17738.870] (**) Video Bus: Applying InputClass "system-keyboard"
[ 17738.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 17738.870] (II) Using input driver 'evdev' for 'Video Bus'
[ 17738.870] (**) Video Bus: always reports core events
[ 17738.870] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 17738.871] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 17738.871] (--) evdev: Video Bus: Found keys
[ 17738.871] (II) evdev: Video Bus: Configuring as keyboard
[ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 17738.871] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 17738.871] (**) Option "xkb_rules" "evdev"
[ 17738.871] (**) Option "xkb_model" "pc104"
[ 17738.871] (**) Option "xkb_layout" "se"
[ 17738.871] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 17738.871] (**) Power Button: Applying InputClass "system-keyboard"
[ 17738.871] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17738.871] (II) Using input driver 'evdev' for 'Power Button'
[ 17738.871] (**) Power Button: always reports core events
[ 17738.871] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 17738.871] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17738.871] (--) evdev: Power Button: Found keys
[ 17738.871] (II) evdev: Power Button: Configuring as keyboard
[ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 17738.871] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 17738.871] (**) Option "xkb_rules" "evdev"
[ 17738.871] (**) Option "xkb_model" "pc104"
[ 17738.871] (**) Option "xkb_layout" "se"
[ 17738.871] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:045E:0750.0001/input/input5/event3"
[ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 9)
[ 17738.872] (**) Option "xkb_rules" "evdev"
[ 17738.872] (**) Option "xkb_model" "pc104"
[ 17738.872] (**) Option "xkb_layout" "se"
[ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Using mtdev for this device
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute multitouch axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:045E:0750.0002/input/input6/event4"
[ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
[ 17738.872] (**) Option "xkb_rules" "evdev"
[ 17738.872] (**) Option "xkb_model" "pc104"
[ 17738.872] (**) Option "xkb_layout" "se"
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[ 17738.873] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 17738.873] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 17738.873] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.873] (II) No input driver specified, ignoring this device.
[ 17738.873] (II) This device may have been added with another device file.
[ 17738.873] (II) config/udev: Adding input device A..... G3 (/dev/input/event5)
[ 17738.873] (**) A..... G3: Applying InputClass "evdev pointer catchall"
[ 17738.873] (II) Using input driver 'evdev' for 'A..... G3'
[ 17738.873] (**) A..... G3: always reports core events
[ 17738.873] (**) evdev: A..... G3: Device: "/dev/input/event5"
[ 17738.873] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
[ 17738.873] (--) evdev: A..... G3: Found 12 mouse buttons
[ 17738.873] (--) evdev: A..... G3: Found scroll wheel(s)
[ 17738.873] (--) evdev: A..... G3: Found relative axes
[ 17738.873] (--) evdev: A..... G3: Found x and y relative axes
[ 17738.873] (II) evdev: A..... G3: Configuring as mouse
[ 17738.873] (II) evdev: A..... G3: Adding scrollwheel support
[ 17738.873] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
[ 17738.873] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:E0FF:0002.0003/input/input7/event5"
[ 17738.873] (II) XINPUT: Adding extended input device "A..... G3" (type: MOUSE, id 11)
[ 17738.873] (II) evdev: A..... G3: initialized for relative axes.
[ 17738.873] (**) A..... G3: (accel) keeping acceleration scheme 1
[ 17738.873] (**) A..... G3: (accel) acceleration profile 0
[ 17738.873] (**) A..... G3: (accel) acceleration factor: 2.000
[ 17738.873] (**) A..... G3: (accel) acceleration threshold: 4
[ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/mouse0)
[ 17738.874] (II) No input driver specified, ignoring this device.
[ 17738.874] (II) This device may have been added with another device file.
[ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/event6)
[ 17738.874] (**) A..... G3: Applying InputClass "system-keyboard"
[ 17738.874] (**) A..... G3: Applying InputClass "evdev keyboard catchall"
[ 17738.874] (II) Using input driver 'evdev' for 'A..... G3'
[ 17738.874] (**) A..... G3: always reports core events
[ 17738.874] (**) evdev: A..... G3: Device: "/dev/input/event6"
[ 17738.874] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
[ 17738.874] (--) evdev: A..... G3: Found 1 mouse buttons
[ 17738.874] (--) evdev: A..... G3: Found scroll wheel(s)
[ 17738.874] (--) evdev: A..... G3: Found relative axes
[ 17738.874] (II) evdev: A..... G3: Forcing relative x/y axes to exist.
[ 17738.874] (--) evdev: A..... G3: Found absolute axes
[ 17738.874] (II) evdev: A..... G3: Forcing absolute x/y axes to exist.
[ 17738.874] (--) evdev: A..... G3: Found keys
[ 17738.874] (II) evdev: A..... G3: Configuring as mouse
[ 17738.874] (II) evdev: A..... G3: Configuring as keyboard
[ 17738.874] (II) evdev: A..... G3: Adding scrollwheel support
[ 17738.874] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
[ 17738.874] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.874] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:E0FF:0002.0004/input/input8/event6"
[ 17738.874] (II) XINPUT: Adding extended input device "A..... G3" (type: KEYBOARD, id 12)
[ 17738.874] (**) Option "xkb_rules" "evdev"
[ 17738.874] (**) Option "xkb_model" "pc104"
[ 17738.874] (**) Option "xkb_layout" "se"
[ 17738.874] (II) evdev: A..... G3: initialized for relative axes.
[ 17738.874] (WW) evdev: A..... G3: ignoring absolute axes.
[ 17738.874] (**) A..... G3: (accel) keeping acceleration scheme 1
[ 17738.874] (**) A..... G3: (accel) acceleration profile 0
[ 17738.874] (**) A..... G3: (accel) acceleration factor: 2.000
[ 17738.874] (**) A..... G3: (accel) acceleration threshold: 4
[ 17738.874] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event13)
[ 17738.874] (II) No input driver specified, ignoring this device.
[ 17738.874] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17738.876] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17738.876] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17739.315] (II) intel(0): EDID vendor "BNQ", prod id 32517
[ 17739.315] (II) intel(0): Using EDID range info for horizontal sync
[ 17739.315] (II) intel(0): Using EDID range info for vertical refresh
[ 17739.315] (II) intel(0): Printing DDC gathered Modelines:
[ 17739.315] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 17739.315] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 17739.315] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 17739.315] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 17739.315] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 17739.316] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 17739.316] (II) intel(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 -hsync +vsync (50.9 kHz e)
[ 17739.316] (II) intel(0): Modeline "640x480"x120.0 52.41 640 680 744 848 480 481 484 515 -hsync +vsync (61.8 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x0.0 73.25 800 848 880 960 600 603 607 636 +hsync -vsync (76.3 kHz e)
[ 17739.316] (II) intel(0): Modeline "1024x768"x100.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz e)
[ 17739.316] (II) intel(0): Modeline "1024x768"x0.0 115.50 1024 1072 1104 1184 768 771 775 813 +hsync -vsync (97.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x900"x0.0 182.75 1440 1488 1520 1600 900 903 909 953 +hsync -vsync (114.2 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 17739.316] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
It would be nice to find out why the settings was being set to "0".
Last edited by Sne (2014-04-29 20:40:50)

[SOLVED] Suspend to ram / disk not working in newer kernels

Hi all,
this puzzles me for a while:
My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on but the screen stays black. Neither the console is working nor can I ssh into it. Only hard reset gets me out here
I did investigate and found many tips and hints which all led to nowhere. I even changed my filesystem back from btrfs to ext4 and my VGA module from proprietary nvidia to nouveau.
When this all failed I got to the idea to burn several install disks. One of the official 2011.08.19 (kernel 3.0.3) and one of the snapshots 2012.06.05_04-00-01 (kernel 3.3.7) and 2012.07.17_04-00-01 (kernel 3.4.4). I guess these can not be compromised by some hosed installation. I started one by one and issued the follwing command:
echo mem > /sys/power/state
which suspends the machine successfully in all three cases. With 2011.08.19 the resume is working but the other two fail. Some more info about the hardware:
1. lspci output
harvey@obelix ~ $ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.3 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
2. lsmod output of 2012.07.17_04-00-01:
harvey@obelix ~ $ lsmod
Module Size Used by
fuse 68768 0
tun 15297 0
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
btusb 11764 0
joydev 9991 0
bluetooth 190551 22 bnep,btusb,rfcomm
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
snd_hda_intel 24053 3
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
microcode 12185 0
i7core_edac 17477 0
snd_hwdep 6300 1 snd_hda_codec
i2c_i801 8180 0
iTCO_wdt 12813 0
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
r8169 49386 0
coretemp 5654 0
edac_core 36656 3 i7core_edac
iTCO_vendor_support 1929 1 iTCO_wdt
serio_raw 4653 0
pcspkr 1899 0
snd_page_alloc 7185 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
mii 4123 1 r8169
snd 58997 12 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
acpi_cpufreq 5933 0
mperf 1235 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
usbhid 36430 1 hid_logitech
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
usb_storage 44760 0
pata_acpi 3408 0
ata_piix 23160 5
crc32c_intel 1987 0
ahci 20549 0
libahci 20023 1 ahci
ata_generic 3295 0
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
uhci_hcd 23372 0
xhci_hcd 81440 0
ehci_hcd 40994 0
usbcore 147533 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784289 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64288 1 nouveau
drm 208926 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
ext4 424175 4
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
3. /var/log/pm-suspend.log of a not working suspend
Initial commandline parameters:
Tue Jul 17 11:21:18 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux obelix 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
ext4 424175 3
jbd2 73919 1 ext4
mbcache 5977 1 ext4
btusb 11764 0
bluetooth 190551 22 bnep,btusb,rfcomm
crc16 1359 2 ext4,bluetooth
joydev 9991 0
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
microcode 12185 0
coretemp 5654 0
serio_raw 4653 0
snd_hda_intel 24053 5
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
pcspkr 1899 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
r8169 49386 0
i7core_edac 17477 0
snd_timer 18966 1 snd_pcm
edac_core 36656 3 i7core_edac
mii 4123 1 r8169
snd 58997 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
iTCO_wdt 12813 0
i2c_i801 8180 0
soundcore 5410 1 snd
iTCO_vendor_support 1929 1 iTCO_wdt
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
btrfs 710578 1
libcrc32c 1002 1 btrfs
zlib_deflate 20436 1 btrfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
usbhid 36430 1 hid_logitech
usb_storage 44760 0
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
pata_acpi 3408 0
ata_piix 23160 5
ata_generic 3295 0
uhci_hcd 23404 0
crc32c_intel 1987 1
ahci 20549 0
libahci 20023 1 ahci
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
xhci_hcd 81472 0
ehci_hcd 41026 0
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784321 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64320 1 nouveau
drm 208958 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
total used free shared buffers cached
Mem: 8173500 884060 7289440 0 3764 405872
-/+ buffers/cache: 474424 7699076
Swap: 8386556 0 8386556
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jul 17 11:21:18 CEST 2012: performing suspend
This seems to be a kernel bug. Any input?
Harvey
Last edited by Harey (2012-08-06 13:51:49)

Another life-sign. The issue is still unsolved but I've come a little further. It seems to be a combination of more failures. The first one is USB hardware. I have a usb keyboard-mouse combo from Logitech (comfort cordless desktop). The USB bus does not wake up correctly when resuming from suspend. So my keyboard is unsuable. I put in a file /etc/pm/sleep.d/20_custom-ehci_hcd with the following content:
BUSES="0000:00:1a.7 0000:00:1d.7"
case "${1}" in
hibernate|suspend)
# Switch USB buses off
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/unbind
done
resume|thaw)
# Switch USB buses back on
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/bind
done
esac
The bus IDs were taken from /sys/bus/pci/drivers/ehci_hcd
When I start pm-suspend from a console (no X started) this seems to reanimate my keyboard while the screen stays black (with backlight on). I can type and reboot. Also I can ssh into the machine from my laptop.
Concerning the blank screen there seems to be a bug in both the proprietary nvidia modules as well as the nouveau driver. The nvidia folks have issued a new beta driver which seems to at least minimize the failures. This all concerns the nv50-family of nvidias cards. I have a GF8600GT which is one of these
I'll wait for this driver and then restart my testing. Until then - no suspend/hibernate
EDIT: Today's nvidia 304.32 is solving my issues - I can sleep again
Harvey
Last edited by Harey (2012-08-06 13:52:51)

Iphone 4 on/off not working

The on/off button for my iphone 4 is stuck and not working.

So is mine! The phone works fine, but there is a danger of activating apps when not being able to switch off the screen. Anyone with any ideas?

[SOLVED] MSI GT70 keyboard buttons not working

Hi! I am a normal user of computers that like games, so I bought this awesome notebook MSI GT70 i7 16gb ram GTX 675MX 128ssd+750hdd, with a keyboard by steelseries.
Everything was ok, using the notebook as came when I bought, with OS windows 8, with no format nor modifications by me, using it since January 2013.
The problem is that about 1 or 2 weeks some shortcuts of keyboard arent working anymore:
- Wifi button isn't working and isn't becoming orange when pressed, and Fn+F8 isn't working either;
- Screen shutdown button is becoming orange when pressed but not working;
- Cd-dvd eject button is becoming orange when pressed but not working;
- I tried also Fn+F9 and Fn+F12 shortcuts, and I think they arent working either.
At the same time, the Cooler button and the Backlight's Keyboard button are working correctly. Turbo button maybe is working too but I don't know if something become overclock when I activate it.
I would really appreciate some help, since I love my notebook very much, and I hope it's not a hard problem to solve.
Thanks!

Quote from: flobelix on 10-July-13, 00:47:56
Try resetting EC: >>How to reset the EC (Embedded Controller)<<
If that doesN't help uinstall SCM and after reboot install latest version: http://www.msi.com/service/download/utility-19670.html
Also try updating .Net Framework 4.5: http://www.microsoft.com/en-us/download/details.aspx?id=36377
Hi,
I followed your advice:
1. uninstalled SCM, restarted
2. installed SCM, restarted
3. tried to update .net framework, had it already
4. resat the EC
But unfortunately it did not change my GE60 2OC's behaviour: when i press the back-light button it opens my browser with dragoonarmy/msi.com>/ BUT NO LIGHT.
Do anybody have a suggestion to solve this??
Thanks Kurt

[Solved] ar9170usb loaded but WIFI not working

Hi,
I bought today my new USB WIFI adapter (TP-Link TL-WN822N), but its not working.
ar9170usb module is loaded correctly, but wlan0 doesnt.
dmesg| grep ar9170usb
[ 3.007214] usbcore: registered new interface driver ar9170usb
lsmod | grep ar9170usb
ar9170usb 49413 0
mac80211 211662 5 ar9170usb,carl9170,rt2800lib,rt2x00usb,rt2x00lib
ath 14355 2 ar9170usb,carl9170
cfg80211 146369 5 ar9170usb,carl9170,rt2x00lib,mac80211,ath
usbcore 142192 9 ar9170usb,carl9170,rt2800usb,rt2x00usb,rt2870sta,usbhid,xhci_hcd,ehci_hcd
lsusb
Bus 001 Device 003: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG]
Any ideas?
Last edited by nexxx (2011-08-08 07:23:16)

Solved my problem by blacklisting "carl9170", so only "ar9170usb" module is loaded.
Blacklisting "ar9170usb" did not work here!
Thanks
EDIT:
After update to Kernel 3.0 the ar9170usb module was removed. Now its not working anymore.
When i load the carl9170 module, it says
[ 2.979833] usb 3-1: firmware not found.
Do I need any additional firmware?
Last edited by nexxx (2011-08-08 07:19:49)

'flagged' to 'filters off' not working. still showing only flagged images.

Recent issue:
when I try to switch from 'flagged' to 'filters off', it is not working. The app is still showing only flagged images. I can't access my unflagged images in the gallery at all.
I have to exit the app completely to correct issue.
I'm using the most recent update of lightroom 5.5 from the CC.

A couple of things to try:
1. Exit LR and then delete the LR 5 preferences file: Preference and other file locations in Lightroom 5. On Mac, you must then reboot.
2. In the Library Filter Bar, select Restore Default Presets:
3. If neither of those help, take a screen shot of the entire LR screen when you have Flagged selected, and again when you have Filters Off selected. Post these here. In the past, some others have experienced wierdnesses in the LR filter behavior, and a screen shot might give some more clues.

Touchpad on/off not working

I have an HP Pavillion G7 and the touchpad on/off stopped working after I uninstalled some programe that the previous owner had installed. Is there a programe that I might have uninstalled that would cause this?
This question was solved.
View Solution.

Hi,
Try using Recovery Manager to reinstall your original Touchpad driver ( probably Synaptics ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

[solved] urxvt terminal: Bitmap fonts not working

Hello
I can't get bitmap fonts to work with urxtv (aka rxvt-unicode).
Here's output of fc-list : file -command
$ fc-list : file
Fontconfig warning: "/etc/fonts/conf.d/53-monospace-lcd-filter.conf", line 10: Having multiple values in <test> isn't supported and may not work as expected
/usr/share/fonts/TTF/DejaVuSerif-BoldItalic.ttf:
/usr/share/fonts/Type1/a010015l.pfb:
/usr/share/fonts/TTF/comic.ttf:
/usr/share/fonts/Type1/n019043l.pfb:
/usr/share/fonts/TTF/DejaVuSans-ExtraLight.ttf:
/usr/share/fonts/Type1/n019044l.pfb:
/usr/share/fonts/TTF/DroidSansArmenian.ttf:
/usr/share/fonts/TTF/times.ttf:
/usr/share/fonts/TTF/DroidSansEthiopic-Regular.ttf:
/usr/share/fonts/TTF/DejaVuSerif-Bold.ttf:
/usr/share/fonts/Type1/n022003l.pfb:
/usr/share/fonts/Type1/n022004l.pfb:
/usr/share/fonts/TTF/arial.ttf:
/usr/share/fonts/TTF/DroidSansHebrew-Regular.ttf:
/usr/share/fonts/Type1/n021023l.pfb:
/usr/share/fonts/Type1/n021024l.pfb:
/usr/share/fonts/TTF/ariblk.ttf:
/usr/share/fonts/Type1/n019023l.pfb:
/usr/share/fonts/TTF/DroidSansFallbackLegacy.ttf:
/usr/share/fonts/Type1/n022023l.pfb:
/usr/share/fonts/TTF/verdana.ttf:
/usr/share/fonts/Type1/n022024l.pfb:
/usr/share/fonts/Type1/n019024l.pfb:
/usr/share/fonts/TTF/TerminusBold.ttf:
/usr/share/fonts/cantarell/Cantarell-Bold.otf:
/usr/share/fonts/TTF/DejaVuSansCondensed.ttf:
/usr/share/fonts/TTF/timesi.ttf:
/usr/share/fonts/TTF/DroidKufi-Bold.ttf:
/usr/share/fonts/TTF/VeraMoBI.ttf:
/usr/share/fonts/TTF/DejaVuSansMono-BoldOblique.ttf:
/usr/share/fonts/TTF/DroidKufi-Regular.ttf:
/usr/share/fonts/Type1/n021003l.pfb:
/usr/share/fonts/Type1/n021004l.pfb:
/usr/share/fonts/TTF/andalemo.ttf:
/usr/share/fonts/TTF/DroidSansHebrew-Bold.ttf:
/usr/share/fonts/TTF/Ubuntu-B.ttf:
/usr/share/fonts/TTF/Ubuntu-R.ttf:
/usr/share/fonts/Type1/n019003l.pfb:
/usr/share/fonts/TTF/Ubuntu-C.ttf:
/usr/share/fonts/TTF/VeraMoBd.ttf:
/usr/share/fonts/TTF/TerminusMediumItalic.ttf:
/usr/share/fonts/TTF/DejaVuSerifCondensed-BoldItalic.ttf:
/usr/share/fonts/TTF/DejaVuSerif-Italic.ttf:
/usr/share/fonts/Type1/n019004l.pfb:
/usr/share/fonts/TTF/VeraMoIt.ttf:
/usr/share/fonts/TTF/DejaVuSansMono.ttf:
/usr/share/fonts/TTF/DroidSansGeorgian.ttf:
/usr/share/fonts/TTF/DroidSansEthiopic-Bold.ttf:
/usr/share/fonts/TTF/Ubuntu-L.ttf:
/usr/share/fonts/TTF/DroidSansJapanese.ttf:
/usr/share/fonts/TTF/TerminusMedium.ttf:
/usr/share/fonts/TTF/DejaVuSans-BoldOblique.ttf:
/usr/share/fonts/TTF/VeraMono.ttf:
/usr/share/fonts/TTF/DejaVuSansCondensed-Oblique.ttf:
/usr/share/fonts/TTF/DroidNaskh-Regular.ttf:
/usr/share/fonts/TTF/DejaVuSans.ttf:
/usr/share/fonts/TTF/cour.ttf:
/usr/share/fonts/TTF/georgia.ttf:
/usr/share/fonts/TTF/DejaVuSansCondensed-Bold.ttf:
/usr/share/fonts/TTF/VeraSe.ttf:
/usr/share/fonts/TTF/UbuntuMono-BI.ttf:
/usr/share/fonts/TTF/DroidSerif-BoldItalic.ttf:
/usr/share/fonts/Type1/c059036l.pfb:
/usr/share/fonts/TTF/VeraSeBd.ttf:
/usr/share/fonts/TTF/DroidSans-Bold.ttf:
/usr/share/fonts/Type1/c059033l.pfb:
/usr/share/fonts/TTF/Ubuntu-RI.ttf:
/usr/share/fonts/TTF/DejaVuSansMono-Oblique.ttf:
/usr/share/fonts/cantarell/Cantarell-Regular.otf:
/usr/share/fonts/TTF/VeraBI.ttf:
/usr/share/fonts/TTF/DroidSansTamil-Regular.ttf:
/usr/share/fonts/TTF/VeraIt.ttf:
/usr/share/fonts/TTF/DroidSerif-Regular.ttf:
/usr/share/fonts/TTF/DroidNaskh-Regular-SystemUI.ttf:
/usr/share/fonts/Type1/d050000l.pfb:
/usr/share/fonts/TTF/VeraBd.ttf:
/usr/share/fonts/TTF/DroidSans.ttf:
/usr/share/fonts/TTF/UbuntuMono-RI.ttf:
/usr/share/fonts/Type1/c059016l.pfb:
/usr/share/fonts/Type1/s050000l.pfb:
/usr/share/fonts/TTF/verdanai.ttf:
/usr/share/fonts/TTF/verdanaz.ttf:
/usr/share/fonts/Type1/c059013l.pfb:
/usr/share/fonts/TTF/Ubuntu-BI.ttf:
/usr/share/fonts/TTF/verdanab.ttf:
/usr/share/fonts/TTF/trebucit.ttf:
/usr/share/fonts/TTF/DejaVuSerifCondensed-Italic.ttf:
/usr/share/fonts/TTF/Ubuntu-LI.ttf:
/usr/share/fonts/TTF/DejaVuSans-Bold.ttf:
/usr/share/fonts/TTF/DejaVuSerif.ttf:
/usr/share/fonts/TTF/georgiai.ttf:
/usr/share/fonts/TTF/DejaVuSansMono-Bold.ttf:
/usr/share/fonts/TTF/DroidSansThai.ttf:
/usr/share/fonts/TTF/trebucbd.ttf:
/usr/share/fonts/TTF/DejaVuSerifCondensed.ttf:
/usr/share/fonts/TTF/couri.ttf:
/usr/share/fonts/TTF/georgiab.ttf:
/usr/share/fonts/Type1/b018032l.pfb:
/usr/share/fonts/TTF/DroidNaskh-Bold.ttf:
/usr/share/fonts/TTF/georgiaz.ttf:
/usr/share/fonts/TTF/timesbi.ttf:
/usr/share/fonts/TTF/arialbd.ttf:
/usr/share/fonts/Type1/b018035l.pfb:
/usr/share/fonts/TTF/UbuntuMono-B.ttf:
/usr/share/fonts/TTF/trebucbi.ttf:
/usr/share/fonts/TTF/UbuntuMono-R.ttf:
/usr/share/fonts/TTF/arialbi.ttf:
/usr/share/fonts/TTF/DroidSansArabic.ttf:
/usr/share/fonts/TTF/timesbd.ttf:
/usr/share/fonts/TTF/DroidSerif-Bold.ttf:
/usr/share/fonts/TTF/DroidSansDevanagari-Regular.ttf:
/usr/share/fonts/TTF/DejaVuSansCondensed-BoldOblique.ttf:
/usr/share/fonts/Type1/z003034l.pfb:
/usr/share/fonts/TTF/DroidSansFallback.ttf:
/usr/share/fonts/TTF/courbi.ttf:
/usr/share/fonts/TTF/comicbd.ttf:
/usr/share/fonts/Type1/b018012l.pfb:
/usr/share/fonts/Type1/p052004l.pfb:
/usr/share/fonts/TTF/DroidSerif-Italic.ttf:
/usr/share/fonts/TTF/webdings.ttf:
/usr/share/fonts/Type1/b018015l.pfb:
/usr/share/fonts/Type1/a010033l.pfb:
/usr/share/fonts/TTF/DroidSansTamil-Bold.ttf:
/usr/share/fonts/Type1/p052003l.pfb:
/usr/share/fonts/Type1/a010035l.pfb:
/usr/share/fonts/TTF/DejaVuSerifCondensed-Bold.ttf:
/usr/share/fonts/Type1/n019063l.pfb:
/usr/share/fonts/TTF/trebuc.ttf:
/usr/share/fonts/TTF/courbd.ttf:
/usr/share/fonts/Type1/n019064l.pfb:
/usr/share/fonts/TTF/Vera.ttf:
/usr/share/fonts/TTF/DroidSansMono.ttf:
/usr/share/fonts/Type1/p052024l.pfb:
/usr/share/fonts/TTF/impact.ttf:
/usr/share/fonts/TTF/ariali.ttf:
/usr/share/fonts/TTF/DejaVuSans-Oblique.ttf:
/usr/share/fonts/Type1/a010013l.pfb:
/usr/share/fonts/TTF/DroidSansFallbackFull.ttf:
/usr/share/fonts/Type1/p052023l.pfb:
What I've read, there should be /usr/share/fonts/local/* too in that list.
I run my window manager, dwm with startx and ~/.xinitrc has these lines before dwm:
xset +fp /usr/share/fonts/local
xset fp rehash
I have also tried to include those with xorg.conf:
$ cat /etc/X11/xorg.conf
Section "Files"
FontPath "/usr/share/fonts/local/"
EndSection
I'm using Ubuntu's patched versions of freetype, fontconfig and cairo if that has anything to do with my problem:
freetype2-ubuntu fontconfig-ubuntu cairo-ubuntu
Xft fonts work fine with urxvt, but bitmaps don't. What am I missing?
Last edited by NAND (2013-01-29 16:13:00)

There isn't a "tamsynu" family in the tamsyn-font package. You're trying to use a font that doesn't exist on your machine.
$ xlsfonts -fn "-*-tamsynu-*"
xlsfonts: pattern "-*-tamsynu-*" unmatched
$ xlsfonts -fn "-*-tamsyn-*"
-misc-tamsyn-bold-r-normal--0-0-100-100-c-0-iso8859-1
-misc-tamsyn-bold-r-normal--12-87-100-100-c-60-iso8859-1
<< And more >>
The syntax for the resource is fine, but it is case-sensitive. The class is 'URxvt', an instance would be 'urxvt'.
This should be good for a first attempt at the proper size:
urxvt.font: -misc-tamsyn-medium-r-normal--14-101-100-100-c-70-iso8859-1
urxvt.boldFont: -misc-tamsyn-bold-r-normal--14-101-100-100-c-70-iso8859-1
That's about equal to DejaVu Sans Mono at 8 points.
If you have rebuilt your font cache, either by restarting X or running 'fc-cache -f', and you want to use Xft, then this is equivalent (Tamsyn does not use anti-aliasing):
urxvt.font: xft:Tamsyn:style=Regular:size=10.1
urxvt.boldFont: xft:Tamsyn:style=Bold:size=10.1

[Solved] xset dpms force off not working

Similar Messages

Maybe you are looking for