Solved yet? iDVD ejects DL disc with 1 min. remaining

Hi. Searched the forum and found several other uses with the same problem I have been having: iDVD'08 ejects my +R DL dvd with 1 minute remaining on the burn cycle. No error message. Was wondering if anyone has solved this issue. Here is what I have tried from poster on this forum (but still doesn't work):
1. Used disk utility to repair permissions
2. trashed my iDvd preferences, restarted
3. deleted encoded assests
4. tried different types of media (Victor, Sony etc)
Still cannot burn this large product for your group. I'm starting to sweat now since I'm the "media guy" lol. Can anyone help?
Thanks!

For reference, I solved my own question above by trying different DVD makers until I found one that works - in this case, Maxell. Apparently, double layer DVD makers are not making them exactly the same.
Here is a very useful link for narrowing things down if you have trouble burning large projects in iDVD.
http://docs.info.apple.com/article.html?artnum=302925

Similar Messages

IDVD ejects dvd disc one minute early, before burning is completed. Why? What can I do to fix this?

iDVD ejects the dvd disc one minute early, before burning is completed. Why? What can I do to fix this? I have checked project via mapping and there are no problems with it. I have previewed the entire project and it runs fine.

Good morning,
There could be a few reasons why the burn doesn't finish. iDVD needs a lot of hard disk space to create the DVD -- 10-15 Gigs is starting to get low and under 5 G is virtually impossible. Reduce the load on your Mac by quitting other applications while you're trying to burn. Also, you may wish to break down your workflow into two steps (I do this routinely):
1) After you're satisfied in iDVD -- use the Save As Disc Image command rather than going directly to burn. This creates a virtual DVD which you can mount and play on your Mac.
2) Second step creates the physical DVD from the disc image. I use Roxio Toast to copy the disc image, but Apple's Disk Utility also works to burn the disc image. Use good quality discs -- Verbatim is often recommended; I've been happy with Sony DVD-R as well.
Here are more ideas: https://discussions.apple.com/message/11269202#11269202
John

Can't use DL discs with mac mini!

Just bought a 1.66 intel mac mini w/DL drive. I tried verbatim DVD+R DL and Maxell DVD+R DL and in each case, the computer ejects the disc, not allowing me to burn my data!
Is there an exclusive club of discs that this paperweight will accept? Any help is greatly appreciated.
BTW, tried to use disk utility also, and double checked the drive was a DL drive through system profiler. It's a MATSHITA DVD-R UJ-846.
Is there something I'm doing wrong?

these were brand new discs right out of the case into the mac. They came in 3 packs and I tried 2 of the 3 in each brand.

Burning iDVD to DVD disc with i Book G4 combo drive and external DVD drive

7/6/2006. After much recent experimentation with iLife, iMovie and iDVD, I found how to use themes and set up movies in my iBook G4 purchased two years ago near Chicago (updated to OS 10.3.9). To burn an iDVD file to a DVD disc on a "combo drive" (that is, it has no DVD writer drive) iBook or other comparable Mac, go to File on the top horizontal tool bar and down there to "burn to DiscImage." Depending on the size of the file, it will take about four hours for every hour of movie file to encode it. I just set it up that night, went to bed and woke up the next morning with it finished. Once encoded, it doesn't need to be encoded again and can be used in the future. But Toast 7 Titanium will not burn it to an external DVD writer as "video." but it will burn the video file as "data." And pretty fast. The 'data' file still remains a video file and will do everything the video file does, only now from an external round DVD disc, too. I discovered this by accident, although Matt (tech support) reminded me about DiscImage. Later, David (also in tech support) told me to download newer versions of iDVD and iMovie, but that did not work, nor had he ever tried it. Remember for a combo drive and using iDVD, and also iMovie, under File burn to DiscImage and save on an external disc as "data." My external DVD write is by LaCie. Best wishes. Chuck Yopst [email protected] Chicago area.
iBook G4 Mac OS X (10.3.9)
iBook G4 Mac OS X (10.3.9)

Like altero said, you're not using Toast properly... Follow these directions:
Suggest you create a disc image from iDVD and then burn the DVD. In iDVD: File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Mountain lion freezes during installation with 34 mins remaining

Hi all,
My upgrade to mountain lion (from lion) freezes almost immediately when it hits the 'install os x' screen. It shows only the smallest possible progress in the progress bar and time remaining is stuck at 'about 34 minutes'. My mbp bought in 2010 rumbles as if doing something, but has been making this sound with no apparent progress for over 45 mins now. How do i get out of this freeze situation?
Thanks!
Mark

Follow-up:
Ok, after more than an hour 'time remaining' changed to 33 minutes and 15 mins later to 28. The progress bar also started showing progress. Strangely enough it then changed back to 31 mins and less progress (but at least it started showing something). Just hope this is not an indication the the new os has lost the ability to tell time...

IDVD ejects disk before burning

Hi,
I'm a bit confused. I am trying to burn a DVD using iDVD 08. After pressing 'burn', it encodes fine, then starts to multiplex but with about 15 minutes remaining iDVD ejects the disc, claims the DVD is 'done'. The timer still continues to count down until it reaches one minute...
Has anyone else had this problem, or does anyone know how to fix it?
My software is up to date.
Thanks,
Matt

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named:
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Last resort: from Craig: Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
Yours Bengt W

IDVD ejects disk before burn is complete

I am attempting to burn a large combined video and data DVD project (6.8 GB), and encountering a problem in which iDVD ejects the disk from the drive just BEFORE the burn reaches completion. The progress bar just sits there at 100% saying that its last task is done, but never actually indicates completion (even if I wait several hours). The only way out is to hit the Cancel button.
I have tried burning both in Best Quality and in Profession Quality Encoding -- both exhibit the same problem. Burning to a disk image completes successfully, but iDVD warns that disks burned from such an image will not work correctly in some players, so it is not useful to me.
As for the DVD produced, the video content is corrupted -- some parts play, but others just get stuck, or worse yet, hang the player. The DVD-ROM data contents seem to be there in the directory -- but the files are corrupted, apparently having never actually been written to the disk.
The drive in use is the one which shipped with this MacPro1,1 (PIONEER DVD-RW DVR-112D). The target disk is a Memorex DVD+R DL. iDVD version 7.0.3 (1110).
I hope someone out there can help, as my project is already overdue...
Thanks in advance,
Josh
Message was edited by: spidey3

I had the same problem burning a 2 hour, 33 minute video to an HP DVD+R DL using iDVD 6 on Professional Quality. All of the files are there and nothing is corrupted, but iDVD did eject the disc and showed a "Done" dialog box, but the program still showed that there was "less than one minute remaining" (much like the odd flaw in iMovie when importing a large AVI where the program freezes with "less than one minute remaining," but really requires an additional 20 minutes to finish importing). The disc was burned using the factory superdrive, HL-DT-ST DVDRW GSA-S10N.
Now the DVD will only play about the first hour of video on any DVD player, including my Mac - it says it's "skipping over damaged area."
If there is any advice out there on how to fix this problem, or any explanation of why iDVD ejects the disc before it is done burning, it would be greatly appreciated.

I have a 2008 iMac 21.5" 10.6.8 Snow Leopard with 4.1.3 VMWare and windows 7.Mountain Lion initially refused to down load as I had back up on the HD. this was removed and installation was accepted but froze in the initial stages with 33 mins to go.

I have a 2008 iMac 21.5" using 10.6.8 Snow Leopard with VM Ware 4.1.3 supporting Windows 7. Initially ML OSX refused to install due to Back up on HD which I removed to trash.It then proceeded but froze up in the initial stages with 33 mins remaining. I was lucky enough to quit and restart using 10.6.8. With all the problems on this chat line, it appears it may be best to leave Mountain Lion well alone, and cut losses rather than tempt fate.Has anybody anything positive to say or help with?

Welcome to Apple Communities
1. Open Disk Utility and repair permissions
2. Open Finder, go to your user's folder > Library > Caches and delete everything
3. Verify disk
4. See if your apps are compatible with OS X 10.8 > http://www.roaringapps.com
You can also do a backup and create a DVD or USB drive to install OS X > http://arstechnica.com/apple/2012/07/how-to-create-a-bootable-backup-mountain-li on-install-disk/ When you start in 10.8 installer, open Disk Utility, select your volume and erase the drive, and install

IDVD keeps ejecting my disc before final burn can anyone help

My iDVD movie keeps ejecting the disc before the final burn what can I do

• Material used: Video-Codec and Photo file format and Audio file format - matters too. I use
- Video - StreamingDV .dv or AIC
- Photos as .jpg (only)
- Audio as .aiff 16bit 44.1kHz or 48kHz (ONLY - never .mp3 or directly from iTunes - all converted to .aiff first)
With this I do not mean any setting in iDVD - BUT the raw material used in iMovie / FinalCut / Avid 100 / Adobe Premiere
As this usually matters - later in iDVD
How did You Export from Video-editing program used ? I prefer
• iMovie HD6 - just drop the movie project icon (NOT iMovie Icon - the PROJECT one) over into iDVD big menu window (avoiding - drop-zones as they are for other tasks)
• iMovie'08 to '11 - Share to MEDIA BROWSER - AND AS MEDIUM - not HD or other resolution as iDVD does a bad downscaling job.
• iMovie'13 (version 10.0.x) - Share as 480p - Import this into iDVD
• FinalCut (Pro or Express) - Export as QuickTime .mov - NO QUICKTIME CONVERSION - IMPORTANT
• Adobe Premiere - I don't know - not tested Yet
• Avid 100 - I don't know - not tested Yet
Cleaning the DVD-burner - If it Burns DVDs OK then that's may be not the problem - But if it only burns CDs OK then either the DVD-burning-laser is dirty or broken.
It is very easy to kill this DVD-laser as it over-heats if one burns several DVDs in a row. I only burn three at a time - then let it cool down for 30 minutes till next batch of three DVDs.
Yours Bengt W

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

Can't boot from OS CD/DVD - ejects disc with no message

I just bought a PowerPC Mac mini on eBay to use at home, and the old user did not clear his data. I want to do a fresh install of OS X and start from scratch.
If I try to boot from either the mac mini 10.3 disc or the 10.4 upgrade disc, and I hold down "c", the system just ejects the disc everytime during bootup.
I can pop in the disc while the system is running, and see the contents, and it will let me double click the "Install" icon. I enter the administrator password (which the previous owner gave me) to allow the install package to reboot the machine, but it still ejects the disk when it is rebooting.
Can someome help me to just get this machine back to square one?
It looks like the root account was enabled in the NetInfo Manager, so I don't know if the previous owner did some kind of security hack to keep the machine from booting to discs.
I can post a pdf of the receipt or link to the ebay auction so people don't think this unit is stolen, if necessary.
Mac mini PPC Mac OS X (10.4)

I solved this problem. It was being caused by the Belkin USB keyboard I had attached. If the keyboard was connected, it would eject disks on bootup. If I removed the keyboard, it would work perfectly.
The keyboard must have been sending some weird input to the machine.

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

Try cleaning the lens and see if that will restore functionality to the DVD drive. Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth) around a business card and insert it gently inside the slot.
If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
Ciao.

Making a disc with iDVD on my Mac won't play on any other player why?

Making a disc with iDVD on my Mac won't play on any other player why?

How about some details on how you made the disc. What sort of media did the project contain? What brand and type of media did you use? What burn speed did you use?
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Eject a Disc takes ages to respond with Bluetooth Keyboard

hi
why is my eject button sooo slow to respond when ejecting a DVD or CD?? Its instant on my old G4 (i know that is USB) but still its instant with everything else.
I believe i read there was a glinch with mac mini's is this true??

The most likely explanation as to why the eject button is faster on the old G4 than on the mini is that you are running different versions of MacOS. As odd as it may sound, the later (in fact latest 2 or 3 updates) to Tiger resulted in widespread reports of notably sluggish response to the eject key - not just on Mac minis, but a range of Mac hardware.

IDVD ejects during multiplexing and burning

Hi folks,
I've used iDVD previously (several times) to create DVDs of movies I've created in FCE4. Today, the program goes so far, then ejects the disk during the "multiplexing and burning" / "writing lead-in" portion. When I check, there's nothing on the disk. Anyone every experience this? And, if you know, please advise as to how I might fix the problem.
Thanks very much for your expertise.
Vic

Multiplexing Error
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Solved yet? iDVD ejects DL disc with 1 min. remaining

Similar Messages

Maybe you are looking for