[Solvedish] Can color depth be changed in X with no xorg.conf file?
I have a laptop that's working perfectly with no xorg.conf file except for the color depth is at 16 and I want it at 24. Can color depth be changed in X with no xorg.conf file? (I already tried the amazing three line xorg.conf file to no avail.)
Last edited by skottish (2008-03-09 03:15:11)
Won't work on a running X session, and has the same effect as the aforementioned xorg.conf file if run before starting X.
I may just have to make a new xorg.conf file. The last one decided it hated some upgrade I made and started wreaking havoc all over my system. Crashes and lockups and flickers galore!
--EDIT--
It turns out that the xf86-video-intel driver was my problem all along. I reverted to the i810 driver and my xorg file works again (it has more than three lines).
Last edited by skottish (2008-03-09 03:16:45)
Similar Messages
-
How can I change the language with the .dat (.bak) file?
How can I change the language with the .dat (.bak) file? Is it legal?
How does it work?
Thanks for answeringhttps://discussions.apple.com/message/17364930#17364930
-
[SOLVED]where I can specify where are my font if not using xorg.conf
where I can specify where are my font if not using xorg.conf
thanks
Last edited by jccl1706 (2010-04-01 18:06:45)You can try to this in ~/.xinitrc :
xset +fp /usr/share/fonts/local
or any other path. -
Color fill only changes the border with formula cells
Color fill only changes the color of the border with formula cells. It works fine and changes the color of the entire cell with normal, non-formula cells. Anyone found a way around this problem?
Well, that's better. Thanks for the camera icon tip. That did the trick. However, that does lead to another minor gripe. I cut and pasted these parts of the screen shot into the reply window. They appeared and everything seemed in order. But obviously they didn't send. It looked like it was going to work nice and easy - Apple like. But it ended up requiring more steps and clicks - Microsoft like...
Anyway, as you can see, the cell with the RED expired has not filled with black like, rather the black appears on the border. -
Change color depth of shared screen?
I'm using ARD 3.2 on Mac Pros running 10.4.11.
First of all, I'm not asking about changing the color depth when viewing a screen with ARD. I would like to adjust the color depth when using the "*Share Screen...*" feature to put my screen on 10 other machines for demo purposes.
When viewing a screen there is a little slider to change among B&W, Grayscale, Thousands, and Millions. There is no slider or any preference that I can find for sharing, but I was wondering if there might be a plist or pref file that can be modified either client-side or on the ARD admin computer.
I need to have millions of colors, but all it will do is thousands. Anyone know if this is possible? Thanks.Hi *,
here's a little guide how to patch the Screen Sharing application so it'll allow adjustment of the color depth in full screen mode:
http://www.macworld.com/article/135649/2008/09/screensharingbuttons.html
Hope this helps,
Joern -
Adobe Reader changes system color depth settings to 256 colors
I am writing here for a friend who has a Windows 7 system and Adobe Reader in version 9.4
Each time he opens Adobe Reader the system settings for color depth are changed to 256 colors, which makes PDF documents barely readable. It is possible to change the color depth back to normal in the system settings, but each restart of Adobe Reader switches the system again to 256 colors.
Does anyone here have a clue how to stop this behaviour of Adobe Reader?
My friend has tried to remove Adobe Reader and reinstall it, but the problem remains.
Since I am a Mac user my Windows abilities are very limited and I am very grateful for any help.
Thanks a lot,
macvetCould be a hardware malfunction. Maybe you should take that MacBook to an Apple store and have it checked out.
-
[SOLVED] X not quite right (resolution, driver, color depth)
I am followed the instructions in the Beginner's Guide, and I am quite happy with my system. However although I am certain I installed the open Radeon driver, any time I enable it, X just gives me a blank screen. If I can ctrl-alt-backspace out of it, the screen is really dim and I can barely read it. So I am stuck with the Vesa driver. As I understand it, Vesa doesn't support my monitor's native resolution of 1680x1050. The highest I have been able to get is 1280x1024. Also I would like to use 32-bit color if I could, but that is not as important.
Below is my xorg.conf as it currently stands. I used hwd to generate it. Actually hwd generated two xorg.conf files (xorg.conf.radeon and xorg.conf.vesa). The radeon file never worked, but the vesa version did work right away, so that's the one I started to tweak.
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
#Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
Option "DPI" "96x96"
# DisplaySize 444 277 # 96 DPI @ 1680x1050 calc: (x|y)pixels * 25.4 / dpi
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
EndSection
Section "Device"
Identifier "Card0"
Driver "vesa"
#Driver "radeon"
VendorName "ATi"
BoardName "Radeon 7500" # RV200 QW
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1400x1050" "1280x1024" "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by ravinggenius (2008-07-09 22:53:00)Thanks for helping me with this. By the way does Compiz Fusion support the Vesa driver?
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux ravinggenius 2.6.25-ARCH #1 SMP PREEMPT Thu Jul 3 20:29:23 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 9 13:14:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0314 card 1106,0314 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3208 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80
(II) PCI: 00:09:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80
(II) PCI: 00:09:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10 hdr 80
(II) PCI: 00:0f:0: chip 1106,3149 card 1565,3206 rev 80 class 01,01,8f hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1565,3206 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1106,3227 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1565,8212 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1565,2200 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5157 card 1002,013a rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon RV200 QW [Radeon 7500] rev 0, Mem @ 0xf0000000/27, 0xf8020000/16, I/O @ 0xa000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xefffffff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[1] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[2] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[3] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[4] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[5] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[9] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[11] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[12] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[14] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[15] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[16] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[18] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[19] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[21] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[1] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[2] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[3] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[4] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[5] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[8] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[9] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[11] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[12] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[13] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[14] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[15] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[16] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[18] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[19] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[21] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[5] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[6] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[8] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[19] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[20] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[21] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[22] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[25] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[26] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 4.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI Radeon X550XTX (RV370) 5657 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI ATI RADEON E2400, ATI RV610,
ATI RV670, ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI ATI Radeon HD 2600 XT AGP, ATI ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini ATI Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI ATI Radeon HD 2600 LE
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon 7500 QW (AGP/PCI) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[5] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[6] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[8] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[15] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[19] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[20] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[21] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[22] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[24] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[25] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[26] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[27] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[5] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[6] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[8] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[16] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[17] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[18] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[19] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[21] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[22] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[23] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[24] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[25] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[26] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[27] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[28] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[29] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[30] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000f8020000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 7500 QW (AGP/PCI)" (ChipID = 0x5157)
(--) RADEON(0): Linear framebuffer at 0x00000000f0000000
(II) RADEON(0): AGP card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.28.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=65536K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2048x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 23000, sclk: 230.000000, mclk: 290.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000; xclk=23000
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-2
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): DFP table revision: 2
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- Primary
TMDS Type -- None
DDC Type -- 0x60
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- 0x64
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "HSD", prod id 23312
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
(II) RADEON(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) RADEON(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)
(II) RADEON(0): Modeline "1600x1200"x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: HSD Model: 5b10 Serial#: 16843009
(II) RADEON(0): Year: 2007 Week: 7
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 47 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.650 redY: 0.318 greenX: 0.303 greenY: 0.605
(II) RADEON(0): blueX: 0.144 blueY: 0.074 whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
(II) RADEON(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEON(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
(II) RADEON(0): #3: hsize: 1400 vsize 1050 refresh: 75 vid: 20368
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #5: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 146.2 MHz Image Size: 433 x 271 mm
(II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) RADEON(0): Serial No: 707MA3KA01840
(II) RADEON(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 94 kHz, PixClock max 210 MHz
(II) RADEON(0): Monitor name: HW223
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff002264105b01010101
(II) RADEON(0): 071101030a2f1e782ea8c6a6514d9b24
(II) RADEON(0): 134f54bfef80b30fa9409040904f8180
(II) RADEON(0): 8140714fa94f21399030621a274068b0
(II) RADEON(0): 3600b10f1100001c000000ff00373037
(II) RADEON(0): 4d41334b413031383430000000fd0032
(II) RADEON(0): 4b1e5e15000a202020202020000000fc
(II) RADEON(0): 0048573232330a2020202020202000bf
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "HSD", prod id 23312
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
(II) RADEON(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) RADEON(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)
(II) RADEON(0): Modeline "1600x1200"x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: HSD Model: 5b10 Serial#: 16843009
(II) RADEON(0): Year: 2007 Week: 7
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 47 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.650 redY: 0.318 greenX: 0.303 greenY: 0.605
(II) RADEON(0): blueX: 0.144 blueY: 0.074 whiteX: 0.310 whiteY: 0.330
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
(II) RADEON(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEON(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
(II) RADEON(0): #3: hsize: 1400 vsize 1050 refresh: 75 vid: 20368
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #5: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 146.2 MHz Image Size: 433 x 271 mm
(II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) RADEON(0): Serial No: 707MA3KA01840
(II) RADEON(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 94 kHz, PixClock max 210 MHz
(II) RADEON(0): Monitor name: HW223
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff002264105b01010101
(II) RADEON(0): 071101030a2f1e782ea8c6a6514d9b24
(II) RADEON(0): 134f54bfef80b30fa9409040904f8180
(II) RADEON(0): 8140714fa94f21399030621a274068b0
(II) RADEON(0): 3600b10f1100001c000000ff00373037
(II) RADEON(0): 4d41334b413031383430000000fd0032
(II) RADEON(0): 4b1e5e15000a202020202020000000fc
(II) RADEON(0): 0048573232330a2020202020202000bf
in RADEONProbeOutputModes
(II) RADEON(0): EDID vendor "HSD", prod id 23312
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output VGA-0 using initial mode 1680x1050
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (470, 300) mm
(**) RADEON(0): DPI set to (90, 101)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf8020000 - 0xf802ffff (0x10000) MX[b]
[1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xf8106000 - 0xf81060ff (0x100) MX[b]
[7] -1 0 0xf8100000 - 0xf8103fff (0x4000) MX[b]
[8] -1 0 0xf8104000 - 0xf81047ff (0x800) MX[b]
[9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[10] -1 0 0xf8020000 - 0xf802ffff (0x10000) MX[b](B)
[11] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[b](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[15] 0 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
[19] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[20] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[21] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[24] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[25] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[26] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[b]
[27] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
[28] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
[29] -1 0 0x0000bc00 - 0x0000bc03 (0x4) IX[b]
[30] -1 0 0x0000b800 - 0x0000b807 (0x8) IX[b]
[31] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[b]
[32] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
[33] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit f0000000 0 0
(==) RADEON(0): Write-combining range (0xf0000000,0x4000000)
(WW) RADEON(0): Cannot read colourmap from VGA. Will restore with default
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 1
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x04000000
(II) RADEON(0): MC_FB_LOCATION : 0xf3fff000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1728,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1728,1202)
(II) RADEON(0): Largest offscreen area available: 1728 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1023000
(II) RADEON(0): Will use depth buffer at offset 0x180c000
(II) RADEON(0): Will use 32768 kb for textures at offset 0x1ff5000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xf0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x07000207 [AGP 0x1106/0x0314; Card 0x1002/0x5157]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe8000000
(II) RADEON(0): [agp] Ring mapped at 0xb3926000
(II) RADEON(0): [agp] ring read ptr handle = 0xe8101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb3925000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe8102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb3725000
(II) RADEON(0): [agp] GART texture map handle = 0xe8302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb3245000
(II) RADEON(0): [drm] register handle = 0xf8020000
(II) RADEON(0): [dri] Visual configs initialized
disable montype: 1
init memmap
init common
init crtc1
init pll1
freq: 146250000
best_freq: 146250000
best_feedback_div: 130
best_ref_div: 12
best_post_div: 2
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xf3fff000 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
disable montype: 1
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xf3fff000 is: 0xf3fff000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe87fe800
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xf3fff000 0xf3fff000
(II) RADEON(0): MC_AGP_LOCATION : 0xe87fe800
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 1202)
(II) RADEON(0): Using hardware cursor 1 (scanline 1204)
(II) RADEON(0): Largest offscreen area available: 1728 x 6984
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "DPI" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 433 x 271
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(WW) Option "XkbVariant" requires an string value
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) PS/2 Mouse: Device: "/dev/psaux"
(**) PS/2 Mouse: Protocol: "auto"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Option "Emulate3Timeout" "70"
(**) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 70
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) PS/2 Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
enable montype: 1
disable montype: 1
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xf3fff000
(II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xd12bd000 at 0xb7c32000
(II) RADEON(0): [drm] Closed DRM master.
FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount is 2, should be 1; fixing. -
Can't properly set up xorg.conf or 10-monitor.conf
Hi.
I would like to ask for Your help. I need someone with greater knowledge over Arch than i have. I have problem with either xorg.conf or 10-monitor.conf. As a matter of fact, now xorg.conf is deprecated so more important is 10-monitor conf.
I have nvidia GTX260 card with newest nvidia drivers. I have 2 DVI's on this card, for an exmaple: DVI-0 nad DVI-1. I would like to use them both using dvi-to-hdmi connector on each of them in order to use my 27 LCD monitor and 40 TV, both with hdmi cable plugged into dvi-hdmi connector and to my graphic card.
I can't solve my problem. Don't know what to do in order to having both screen working. If my 27 inch LCD monitor is connected by DVI-DSUB connector, i have signal on screen. If i plug it by dvi-hdmi connector, than i have screen, singal, picture during boot, but GUI won't load, it stays on "running user interface" or something similar. It is because of my settings in 10-monitor.conf. Here is my setup of 10-monitor.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.20 (buildmeister@swio-display-x64-rhel04-06) Wed Oct 30 18:38:00 PDT 2013
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "DVI-D-1"
VendorName "HP"
ModelName "Hp2228H"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "ignore" "true"
Option "DPMS"
Option "ignore" "true"
EndSection
Section "Monitor"
Identifier "DVI-D-0"
Option "ignore" "true"
EndSection
Section "Monitor"
Identifier "Unknown-0"
Option "ignore" "true"
EndSection
Section "Monitor"
Identifier "unknown-1"
VendorName "LG"
ModelName "LG Electronics 2D FHD LG TV 27MA73D-PZ"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "TV-0"
Option "ignore" "true"
EndSection
#Section "Monitor"
# Identifier "Monitor0"
# VendorName "Unknown"
# ModelName "Unknown"
# HorizSync 28.0 - 33.0
# VertRefresh 43.0-72.0
# Option "DPMS"
#EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "TripleBuffer" "1"
Option "ConnedtedMonitor" "DFP"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
As you can see, there are few section named monitor because Arch detects with nvidia drivers, that i have few screens attached, while i haven't. If i change monitor sections than i could have random switching off signal/screen, and either can have pictrure or don't at all, wither with good 19x12 resolution, or changed for a different, streched to right and i can't log in, and change it eithere.
So, i would like to have what i discribed on top. Could somebody point me in good direction? I tried to generate xorg.conf using nvdia-xcofig, than i applied it to 10-monitor.conf but after reboot i got stuck at "running user interface" or gui, there was no KDE greeting login screen - in my opinion because 10-monitor.conf can't detect that screen is attached by dvi-hdmi connector (detect ok with dvi-dsub and my setting of 10-monitor.conf above). So what to do in order to Arch detects dvi-hdmi connector and detects that i have screen in order to being found and in order to log in into login screen?
When i renamed 10-monitor.conf to 10-monitor.conf.bak and rebooted, i get past "running user interface" or logins screen, i have purple-blue kde greeting and could log in but resolution was stretched on right side and i have only "left side" of screen, so i didn't see login "propmt", or login window, and couldn't log in. Tried to kill x and resuming kdm.service but it won't work. Don't see login window on blue-purple loging screen.
I would like to get past this, would like to use dvi-hdmi connector on my 27 LCD monitor, and being able to use the same dvi-hdmi connector for my 40 TV and use them both. Could somebody help me? What do change in 10-monitor.conf, what to add, what to remove? I'm using now only 27 LCD monitor trough dvi-dsub because i can log into login window because it is in the center of the screen, not stretched to righ on dvi-hdmi connector.
It is not fault of the connectors, i tried on Windows and it Works. Want do have it on Arch because i dont use Windows very often.
Help [:|]Heh, i found something so stupid about Arch that i can't believe it. In fact, i'm not able to change it.
I had two screen connected to my new graphic card, i moved from GTX260 to GTX660. One flat panel, LG 27 inch, was connected troug one of the DVI (DVI-I-1) and 40 TV was connected trough second DVI (DVI-D-0). What i found? Well, as a matter of fact, this new graphic has booting sequence order regarding working outs during boot. On HDMI out and on DVI-I-1 when booting there is signal and screen. On DVI-D-0 during booting sequence there is no singal, singnal comes up at login prompt of Windows or Arch. Ok, can live with that.
There is one that i can't. If i want to have working setup of my 27 + 40 flat panels, i have to have 27 connected trough hdmi out, 40 trough something other. I'm not able to have 27 connected to DVI-I-1 and 40 TV to DVI-D-0 because during booting sequence, when there is low resolution, i have screen and singal on 27 flat panel, but when there should come up kde welcome login screen, i don't have it. It stays at terminal, when i see info "sterting upser graphic mode". That's strange! The only way to have booting sequence on 27, and also singal/screen after booting sequence of 27 is to have connected 27 flat panel to hdmi out, not DVI-I-1! Why? Don't know but Arch doesen't want to work that way, no matter what i put in 10-monitor.conf. Tried the same on Windows, no matter which out is being used (hdmi or DVI-I-1), during booting sequence there is singal/screen/picture and after it i can normally log into Windows. In case of Arch, i can't.
Don't know. I would show my 10-monitor.conf:
nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 334.21 (buildmeister@swio-display-x64-rhel04-13) Thu Feb 27 14:33:33 PST 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG Electronics 2D FHD LG TV"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 660"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-3"
Option "metamodes" "HDMI-0: 1920x1080 +0+0, DVI-D-0: 1920x1080 +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I wan't to have both flat panels on DVI outs because i need hdmi for something other. Is there a way to solve it? Strange is that with provided resolution, vertical and horizontal frequencies, on hdmi out i can boot, i can log into Arch (while my other screen is being found, and also i see picture on login screen) but when i use both of DVI outs, i see booting sequences, and than Arch informs me that has started graphic user mode...but it stays at this black screen. What's more strange is that if i delete 10-monitor.conf, connect my 27 LCD to DVI-D-0, and TV to DVI-I-1, than i see booting on Toshiba 40 TV, don't see it on LG 27, after log in i can set proper resoluton for 27 LG, have both screen working, but if i save this settings in 10-monitor.conf, after reboot...the same thing, stays at message that Arch started graphical user mode.
Don't know what's going on. Can somebody check my xorg? Point me? Maybe xinerama is at fault? I want my LG 27 to be cloned on 40 TV.
In big shortcut: during boot on DVI-I-1 i have signal, can't log into gui mode, stays at mentioned screen with info that it started graphic user mode. What to do, or what to put into 10-monitor.conf?
Last edited by firekage (2014-03-09 00:54:45) -
Need to find a scripts for changing default "Open with" iTunes app to Quick
Hello all...
I'm new to scripting but need a script really quickly...
I was wondering if anyone knew where I could find a script that will change the default "Open with" of audio files placed within a certain folder on my desktop...
I'm making sound clips with WireTap and dumping them in a folder called WireTapExports as .mp3. I then need to play them without using iTunes (and importing them by default) but going into the "Get Info" and manualy changing the "Open With" settings for each file is taking ages...and it's very irratating...
Is there a way I can make all audio file put in that folder automaticaly open with Quicktime instead.
I know this is quite easy to most but I've only just started looking at Applescript (i.e. a few days ago) and but I need this to work now...
Many thanks in advance...
PigeonCake...Not what you want, but if you hold the control key while getting info it changes to summary info which then lets you change the preferred application on a batch of files in one go.
-
I need to change the color depth of an external monitor, but it seems this has been removed from 10.6! How can I change the color depth of an external monitor? Thanks!
You can improve the framerate only if your application is fillrate limited, if it is polygon limited you will see no difference.
But yes often you get increased framerates, but beware that using 16 bit colours will on NVidia mean you also use 16 bit Z-Buffer, which can lead to annoying rendering artifacts.
You have two ways to set the colours:
1) Change desktop colours to whatever you wanna use.
2) Use exclusive fullscreen mode, and set colours.
How about rewarding me some duke dollars for that answer? :) -
Possible to change color depth for Leopard's VNC server?
I think it is very nice to include vnc server right into Leopard. But one problem, it seems it will only accept connection from clients when it is set to use full colors. This is painfully slow over WAN, any way to change the requirement from the server end?
Possible to change color depth for Leopard's VNC server?
Yes you can modify your screen sharing application so that you can adjust the colour depth. However you need to issue a command in the terminal to get this to work.
http://www.macworld.com/article/131094/2007/12/screensharepower.html -
Solaris 10 - Changing default screen color depth
Hello,
I just upgraded a Sun Blade from Solaris 8 to 10. I have a rather old image display application (ftp://east.la.asu.edu/pub/software/pw-5.23.tar.gz) that is absolutely essential for my work, and it will not run under Solaris 10, either on the CDE or jave/gnome desktops.
The executable for this application was compiled using gcc on Solaris 8, and ran fine on Solaris 8 CDE (v1.4.3?) with the "Most colors for applications" color setting in Desktop Color prefs. With that setup, the application allocated 216 colors when starting up, which was sufficient. If the application could not allocate enough colors, it would use its own private color map, which caused window "flashing," but that was OK.
Under Solaris 10 CDE (v1.6.3) and gnome, the application cannot allocate enough colors, and cannot even start with its own color map.
I re-complied the application on Solaris 10 using Sun Studio 11, and the same problem occurs with the new executable.
I think that the problem may be related to default color depth. Right now, with xwininfo, my Solaris 10 CDE xterms are 24-bit true color. Unfortunately, I think that I may need to set my default color depth to 8-bit pseudocolor for the application to run. How can I change the default color depth of the CDE and gnome desktops to pseudocolor? I know that the application works on HP-UX CDE with the default depth as pseudocolor.
I cannot remember if I had somehow changed the settings for color depth on Solaris 8 to get the application to run. I do know that the xwininfo results for a Firefox browser window running on my Solaris 8 CDE desktop was 24-bit true color. I hope very much that this will be the case if I change my default depth to 8-bit on Solaris 10.
Any help that anyone can provide would be GREATLY appreciated. I am dead in the water without this imaging application. I am a member of the Sun Developer Network, and I don't know if I should post this message somewhere on the Developer Forums. Please let me know if I should.
Thank you in advance!!!!!Hi,
In my first post there is a link to the code I am talking about. The code is public and available. It was created by Noel Gorelick at ASU. It is based on having an 8-bit Xserver running. There are few users of this code, but I completely agree with you that a new generation of unix-based imaging code needs to be developed that is system and Xserver independent. Optimal code should detect screen depth and open windows with desired color depth automatically, without "flashing.". That way, it could even run under Gnome, which allocates all but 18 8-bit colors for the desktop. Under CDE, the code allocates 224 colors for itself, which is great. The above code will create its own colormap if it cannot allocate enough colors, but there is flashing in that case. Have at it if you wish.
Best regards,
Sparcmaster -
Change color depth on pavilion 23
Is it possible to change the color depth on a Pavilion 23? Can you add software to add color depth? Sorry not really computer savvy! Thanks in advance!
The Pavilion 23-g010 is an All-in-One computer.
As noted, this specific model uses a 16cm x 16cm motherboard (AMD CPU), referenced as Femto AIX,
manufactured by T&I for HP.
The Intel standard (released August 2012) for All-In-One motherboards is Thin-ITX, (17cm x 17cm), with a height restriction of 2.5 cm (some cases permit height up to 3.5 cm)
Several manufacturers provide motherboards in the Thin-ITX form factor for custom builds by advanced DIY users.
This video shows what is involved, in such builds.
http://youtu.be/eNL6DuBtFNg
Tech Report
http://techreport.com/review/24785/intel-thin-mini-itx-platform-nine-months-later
Hardware Secrets
http://www.hardwaresecrets.com/article/The-Do-It-Yourself-All-In-One-Computer-Standard-from-Intel/17...
gb -
How do I change Imac OS 10.7 color depth?
Im using an Imac with Mac OS 10.7.3. I am trying to use a Citrix to open some files but I get the error message that display is configured for 65536 colors and is not supported. I need to us 24 or 32 bit color. I cannot figure out how to make this change. Under system preferences>Display I see nothing that allows me to change depth to those levels.
Got to Displays icon in menu bar. When click on it I see the following. (see image below). Still can't find where to choose color depth.
-
Does anyone know how to change the color depth on multiple clients, using ARD, without restarting? Is it a simple UNIX command?
Example: A student runs an OS9 application that changes the color depth from Millions to 256 Colors. When you try to Observe that machine, after the student has quit the program, the picture is all garbled (ARD has trouble viewing 256 colors).
I want to be able to remotely change the color depth back to Millions from 256 Colors without restarting. Can this be done??You can if you install cscreen (freeware) which allows you to change resolution and pixel depth via the command line. Once installed (and it can go pretty much anywhere), you just use the Send Unix Command function with the path to the cscreen utility and the appropriate settings. Here's the full syntax:
Usage: cscreen [-d <depth>] [-x <width>] [-y <height>] [-r <refresh>] [-s <display>] [-v] [-m] [-f] [-l] [-h]
[-d <depth>] : specifies the bit depth (bits per pixel)
[-x <width>] : specifies the width in pixels
[-y <height>] : specifies the height in pixels
[-r <refresh>] : specifies the refresh rate in Hz
[-s <display>] : specifies which display to use (defaults to main display)
use a as the option to -s to specify the action on all displays
[-v] : display valid modes (use -s to specify display or nothing for the default)
[-m] : require an exact match
[-f] : forces settings (ignores safety mechanisms; USE AT YOUR OWN RISK)
[-l] : lists the current displays and modes
[-p] : sets the requested display to have the menu bar
[-h] : displays the usage
Maybe you are looking for
-
0CO_ITEM_TX field needs to appear in the report
Hi, I have a report which gets data from MULTI PROVIDER in turn from DSO 0CCA_O09 CO-OM-CCA: Actual - Line Items. This DSO has the field 0CO_ITEM_TX - but when I try to drag it in from dso to multi provider screen it disappears in the data fields
-
Error in Data Transfer : From CO-PA to SOP Flexible Planning
Hi Friends I am working on a Scenario of Transferring CO-PA data to Flexible Planning, I am encountering few problems, I have done the followig steps, request you to check and get back to me.. The following configuration steps are done with Example;
-
How to declare local variables in PL/SQL stored programs
Where do I declare local variables in a PL/SQL stored program? I get compiler errors with either of the options below: FUNCTION GET_PRINCIPAL_BALANCE (CUT_OFF_DATE IN DATE, TITLE_SN IN DATE, TOTAL_BALANCE OUT NUMBER) RETURN NUMBER IS TOTAL_BALANCE NU
-
I updated/installed 8.0.1 a month ago, (had 3.5. 0 or 1 can't remember) and under HELP in the top toolbar, About Firefox, said I have 8.0.1. Today, Sunday 12/18/11 tried updating something (forget what) and it said I have old version and need to upda
-
Configure system to send e-mail
Hello, I am trying to send an email of purchase order message and ME142 error occurs. Someone knows what steps ( transacions ) have I to configure to send e-mails? I know SCOT transaction, but is there another transaction in where I have to do someth