Solving the problem with error 80003 cannot access bb ID update server

Must be done over wi-fi only, switch off the cellphone network, works without a problem for me, hope it will work for everybody

Hi Guys,
Oops! by the look of things we all have the same problem, it seems as if BB is frustrating a lot lately. I updated my app world this morning and when i rebooted, and can't access my app world. Its giving me the same error code 80003).

Similar Messages

Error 80003 cannot access bb ID update server

Hi,
Installed the latest version of bb application world yesterday, since then I can't go into app world, says I need to update my blackberry identity before I can enter the app world. When I click yes to update my bb ID it gives me an error "download failed, cannot retrieve the blackberry identity update server, please try again later, error 80003"
I tried to re-install app world, nothing seem to work, my bb ID worked fine on the previous version.
I have a bb curve 8520. Can anyone please help / tell me how to fix this?
Thanks
Lee
Solved!
Go to Solution.

Hi Guys,
Oops! by the look of things we all have the same problem, it seems as if BB is frustrating a lot lately. I updated my app world this morning and when i rebooted, and can't access my app world. Its giving me the same error code 80003).

Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Same here. Everything was fine running on ios 6.0, I don't know what possessed me to upgrade! I contacted O2 and thet went through the usual settings; reboot; airplane mode etc and it works for a while (like 5 mins) then service is losted with the network. I've even deleted the exchange email account and rebooted as read on the internet that this would fix the problem.... guest what....yep no joy! This is clearly a faulty software update and need fixing pronto! I've read that ios6.1.2 will be out soon to fix the firmware that was suppose to fix the initial network problem. When will this be realeased Apple?! It's hardly fit for purpose when I can't make calls or surf the internet.

TS2776 error message 'cannot access conflict information sync server'

I recently can't sync my iPhone with my Microsoft Outlook calendar. I receive an error message 'cannot access conflict information sync server. Try again later.' Help!

You are trying to use conflicting services for sync, disable all the ones that you do need. Once only one is enabled, you will be OK

Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.

Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

Please help with Error #1009 Cannot access a property

Hi All,
I have a simple flash movie where play_btn should go to a label on a timeline where I have a video playing and a stop_btn should go back to a first frame (label "start") and thus give an illustion of stopping the movie.
I have no problem with the play_btn, however stop_btn doesn't work and when I test the movie I get the following error message:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at FSV_header1_fla::MainTimeline/frame1()
below is my code - any help is very appreciated!
stop();
play_btn.addEventListener(MouseEvent.MOUSE_DOWN, playMovie);
close_btn.addEventListener(MouseEvent.MOUSE_DOWN, stopMovie);
function playMovie(event:MouseEvent):void {
    trace("Play!");
    gotoAndPlay("start");
function stopMovie(event:MouseEvent):void {
    trace("Close!");
    gotoAndStop("stop");
Thank you!!

Thank you!!
I was able to fix it by putting all the buttons on the first frame and toggling visibility on/off. Here's the code:
stop();
close_btn.visible = false;
play_btn.addEventListener(MouseEvent.MOUSE_DOWN, playMovie);
close_btn.addEventListener(MouseEvent.MOUSE_DOWN, stopMovie);
function playMovie(event:MouseEvent):void {
    trace("Play!");
    gotoAndPlay("start");
    play_btn.visible = false;
    close_btn.visible = true;
function stopMovie(event:MouseEvent):void {
    trace("Stop!");
    gotoAndPlay("stop");
    close_btn.visible = false;
    play_btn.visible = true;

How do i solve the problem with repeated renew lease requests

How can i solve the problem of repeated renew lease requests?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
You don't say what you are doing or trying to do. See #5 below.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netwhttp://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-wonhttp://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bughttp://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading-http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hhttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sighttp://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-Ohttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connecthttp://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipadhttp://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asphttp://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxEhttp://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmzhttp://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

When is apple going to solve the problems with the 4S battery???

I bought a new iPhone 4S last week and I have some many problems with the battery the first day, but I thought it must be something normal because of the first time but the few next days it was the same. On Thursday morning I received the iOS 5.0.1 update and I thought it was going to solve the problem but it wasn't!! So I called Apple and they told me I should restore my phone and after that it was supossed to work properly, but it didn't so they told me I should go to an Aple Store and they would change my phone but... it's supossed that all 4S have the same problem so... I would have a new iPhone one week later but with the same problem?? If Apple solve the problem in days, weeks or even months are they going to give us the new (working-properly) phone instead our old one??
Thank you very much!!

Some Users have reported that a Restore has Resolved Issues...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

FCPX10.1.1 does not solve the problem with long-time clip editing!

OS: clean installed mac os10.9.1
FCPX: FCPX10.1.1
Project: 4clips, all of the clips is about 1 hour long (dvcprohd)
Disk: 900MB/S++
machine specs:
2*3.06Ghz 6-core
24GB DDR3
and I've tried these graphic cards:
K5000
and
2 5770
all get the same results:
If I double press the "L" key, the response of FCPX is too slow
If I do other operation like browse the clip, or import long time clip,
the FCPX will become too slow to browse the timeline.
I've found the FCPX like to generate audio waves of the clip and
there's no option to shutdown this! I've tried all the options in FCPX like
do not show the waveform of audio in preference and close the audio waveform in timeline
I don't think I can work the project with 10.1.x.
the 10.0.9 also has the 1st problem, but don't have the 2nd problem.
Another project: 2000++ 4K 50P clips(XAVC), but on FCPX 10.0.9, all of the clips is less than 40mins, always 20seconds.
though it will get slower when we import clips day after day,
it's much more smoother than 10.1.1!!!!!!
so,
I don't think we should update to 10.1.x for the little promotion of performance.
and 10.1.x also do not support nvidia K5000 card.
the render is slower than ait5700.....
I hope apple can solve the problem,
all of the above is just basic editing needs!
if the fcpx can not do even a long-time clip editing
why should I use it?

2 project:
1. 4*1 hour clips dvcprohd
that's the problem! I can not bear it.
2. 2000++clips 4K XAVC 50P project which I don't run on FCPX 10.1.1
I run it in fcpx10.0.9, it's fine, but slower when I imported more and more clips.
until now I can bear it.
the fcpx10.1.1 editing long-time clip has problem:
1.
it use 150MB/s harddisk speed to generate the waveform.
I have 900MB/s disk speed, so that's not the problem,
but it generate all the time!
1 hour clip's wavefrom generates for 1 hour without stopping, if I stop it , the fcpx crashed!
2.
when I skimming the clip for editing, the fcpx gets slower, always 2mins to response my operation.
3.
when I double press J or L key, the fcpx will need about 1 min to response.
the FCPX10.0.9 editing long-time clip problem:
the fcpx10.0.9 can handle the long-time clips, but also has very slow response when I doulbe press J or L key.

How I managed to solve the problems with the 1.2 iPod/7.0 iTunes Upgrade

As many of you know there are several people that have experienced a problem with or after upgrading their iPods and iTunes. While mine is not the definitive answer, it is one that worked for me and I hope that by sharing this, many will receive a benefit.
This applies mainly to Mac users as my platform is MAC OS X based.
Proceedure:
1. Download the stand alone copy of iTunes 7.0
2. Repair disk permissions. (I found that many of my iTunes permissions were in error after my initial upgrade to 7.0 directly via iTunes)
3. Perform a hard reset on your iPod (Menu and select buttons)
4. If your iPod is connected or disconnect it doesn't really matter, just make sure that it is ejected and not being used by iTunes.
5. Install itunes again.
6. Now iTunes is installed, it should see your iPod. (It may or may not try to sync. If is syncs let it, if not repeat step 3 with the iPod connected. This should facilitate it being seen by iTunes)
7. Perform a restore.
8. Just sit back and wait until it installs all the info back.
I tried this method and it worked. My iPod and iTunes are in perfect unison as before.
Hope this helps

Don - Specifically, what problems were you having before your fix? I'm able to upgrade my 60GB iPod to firmware 1.2, but then it gets the scrambled screen and freezes. I downgraded to 1.1.2 and re-loaded 1.2 with the same results. So far I haven't located any fixes for this problem, which could be hardware related.
Powermac G5, iMac G5, MacBook Mac OS X (10.4.7)

How can I solve the problem with Adobe viewer/player ?

Dear guys in Apple support team
I have a MacBook Pro 13' late 2011, several months ago I updated my mac to mountain lion and I can say its really great operating system and I really enjoy working with it. The only problem I have is that more than twice a day while using my computer for reading a paper in PDF or in online PDF's or sometimes watching flash videos online, cooling fan starts to work faster and when I look up in the activity monitor, more than 60% of the CPU processing is engaged with Adobe player/viewer and I have to kill the process to stop cooling fan and release the cpu process. My adobe products are in the latest update and there should not be any problem about that.
Please help me solve this problem and enjoy more than ever from your creative products.
Thank a lot
Ali

Flash has always been a problem hogging the CPU. Recent versions, however, have been a little better. You might try Adobe Flash Player 11.7.700.169. I would also recommend the Safari extensions ClickToFlash 2.7.5 and FlashToHTML5 2.4.

OCR with Acrobat 8.2.3 occassionally stops with error (5) cannot access paper capture service

After I updated to acrobat 8.2.3 (no other changes in my computer software), OCR recognition occassionally stops with an error that reports the paper capture service is not accessible/available. This is not a fatal error because OCR can continue in the document but the page is not fully processed. The error appears to occur after decomposing and before recognizing text. This problem did not happen with 8.2.2. I have two computers with 8.2.3 and this happens on both computers. I would be happy to downgrade to 8.2.2 until Adobe fixes this problem but apparently adobe does not allow removing the 8.2.3 update.
I tried opening the .pdf directly from the Adobe open menu as someone had suggested in another forum, but the problem persists.
I use this OCR capability almost daily on large (>100 page) files so I need at least a temporary solution right away. Any suggestions?

Not sure if this is a Flash Player problem. You are more likely to get a reply if you post your question in the AS3 forum.

My sound is like echo and i can't solve the problem with realtek hd audio manager

HP G72 notebook
Windows 7 64 bit
Sound is like echo and can't solve problem with Realtek HD audio manager

It's a Qosmio X300-16M (windows 7 64bit)
I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
And I just want to know if it's a curent problem or not... and if someone can fix it

How can I solve the problem with copying text from Google Documents?

Ctrl+C and Ctrl+X are not always working in Google Document opened with Mozilla Firefox 30. This problem first occurred 2 days ago. No changes to the software were made.
The problem is not stable and permanent. I can successfully copy several lines from document and paste them somewhere else. And suddenly the next one is not copied using ctrl+c. Even ctrl+x is not working until I change the selection of the lines. Sometimes it begin to work after changing the selection, sometimes not.
I'm using Google Documents for a long time. I always use Firefox to work with them. And I've never had this problem before.

This problem happens for me as well. I can copy/paste from Firefox initially, but then after pasting elsewhere the Firefox page has to be refreshed in order to copy something else....

Solving the problem with error 80003 cannot access bb ID update server

Similar Messages

Maybe you are looking for