Some accounts in 0ACCOUNT hierarchy MD not loading from ECC

Hi,
I am trying to load 0ACCOUNT hierarchy master data from ECC to BW, using standard data sources. The process is in place in Production and was running fine until couple of days back. All of a sudden, the daily master data load doesn't bring in new accounts added to hierarchy in ECC.
The user responsible for adding and updating new accounts to hierarchy has checked on the ECC, and I have seen the ECC screen. The new accounts are correctly placed in correct hierarchy on ECC side.
I have checked and tried couple of things. The Attr and Text are coming through fine, only hierarchy is not getting updated on BW side. I tried to replicate Metadata for the data source on BW side, I have manually run the DTPs, but still no success.
I will really appreciate your help on this.
Thanks,
Abhishek.

Hi all,
Thanks for your prompt replies. To answer to all the above replies:
1) I am not getting any errors while loading the account hierarchy. The process state is Green. It is just skipping the new accounts. There are no new patches installed in BI, check with Basis team
2) I had checked the ACR, 0ACCOUNT is already included in the process.
3) At ECC side, the team always added the accounts/accounts ranges manually to the hierarchy and it worked well in the past. The hierarchy data source we are using always is either in Modified/Content mode and I assume we cannot activate the hierarchy data sources that is provided by SAP.
3.1) Yes, we have maintained the hierarchy structure at Infoobject level. The attributes and texts are coming through fine and those accounts are already in SAP BI attribute/text, but they are not brought over in hierarchy.
3.2) I am not authorized to access RSHIER/RSH1 T-code.
Thanks,
Abhishek.

Similar Messages

Problem during hierarchy load from ECC 6.0 to BW

Hello,
I encountered a problem during hierarchy loads from ECC to BW:
I get the following in BW:
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
Once I go into ERP and look at the IDocs I get the following message:
Idoc Error 26:
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment E1RSSH does not occur at the current level of the basic type (extension ).
This error can have several reasons:
The segment E1RSSH is assigned to a group whose header segment does not occur.
The segment E1RSSH does not exist in the syntax description of the basic type (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type (extension ).
Can anyone help?

The most basic setting in a BW system is its connectivity with the R/3 system (which is a basis team activity, but BI consultant can always help).
Issue: While creating source system, I am getting an error "Segment E1RSSH does not exist".
Diagnosis
Segment E1RSSH is in the syntax description, but it does not exist.
The issue was that some of the entries in the table EDISEGMENT were missing.
As this a standard table, it is recommended to restore the table from Backup or from another BI system. (Please ask your basis team to do it.)
Now, the significance of the segments: We all know that we require 3 message types in total to communicate with R/3 system. RSRQST, RSSEND and RSINFO.
Now each of the message types has some segments which help in communication.
You can see this segment types in the t-code we30. Just enter the basic idoc type and click on display.
This error is not a common error, but can be useful if at any stage of implementation or support, the table gets disturbed and you have issues with source system connectivity.
Thanks
SM

Apps not loading from cloud

My son just got a new iPhone 4S some of his apps are not loading from his cloud storage.

That is not the way to get Apps, they can only be downloaded from the App store.
Apps from a DVD will not be related to your iTunes account and therefore will not be transferred to your iPad.
The only way to install Apps on to an iPad is to download them from the iTunes Store.

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

Java console not accessible, will not load from FFx tools dropdown menu (had same prob with 3.6.15). Latest Java installed and IS accessible thru control panel

XP OS, have NoScript installed, disabled, Java console still will not load from FFx.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Counters not loading from saved PerfMon html settings file in IE

The Settings html file is hosted on our internal trusted web server, the perfmon interface loads but no counters load.
If I right click and go properties there are no counters configured. If I add a counter that works, but upon reloading the page the counters do not load from the HTML source file.
I check the source of the HTML, and the counters are there, but aren't loading.

if you open the file from a local drive it does work, but I cant get it to work from a network folder.

Itunes will not load from external hard drive

My Itunes will not load from my external harddrive. worked fine a few days ago.

I do not have any exclamation points - missing songs do not show at all. I had to click 'locate files' when I opened iTunes after reorganizing, since there was nothing there anymore

TS3991 why are 2 of my Numbers documents not loading from icloud They appear in faded grey and I can't open them ? How do I recover them ?

why are 2 of my Numbers documents not loading from icloud They appear in faded grey and I can't open them ? How do I recover them ?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

I downloaded some addons and now I can not load my email

I added some addons today and now I can not load my personal email which is an aol.com account. Apperently one of the addons messed up my system

Firefox updates don't "trash" your computer, those users (and it's very few considering that millions of users update a day) usually have other issues on their computer. Following our directions at [[Update Firefox to the latest version]] will ensure your Firefox updates safely.

Windows do not load: on certain websites correctly treated by Firefox 3.6 some windows in a page are not loaded by Firefox 4 and have to be reloaded.

On a website such as http://forums.kyngdvb.com/forum.php some windows often do not load with the page and have to be reloaded. This did not happen with Firefox 3.6

See http://kb.mozillazine.org/Website_colors_are_wrong
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Bookmarks will not load from dropdown menu

Hi,
i copied a lot of bookmarks over from safari to add to my existing bookmarks in firefox. The import seemed to work fine at first but soon i found that the drop down menus for my bookmarks toolbar would not load. Sometimes some and not all will load, sometimes not at all. If I open a sidebar, I can see that all my bookmarks still exist. Some have picture icons next to them, some have a blank white page icon. The ones with the blank page icons don't load from the sidebar.
I'm not the most technical and it took me hours to arrange my bookmarks. Any fix for this without having to start from scratch would be really helpful.
thanks!
Henry.

You might try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your Shutdown functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
EDIT: Also, if you can launch Activity Monitor in your Utilities folder and see if you can find the process that is still running.
-mj
Message was edited by: macjack

Ticker not loading from any column

is it possible to have a ticker not loading any data (from any column) ?
only scroll some text on the dashboard page.
thank you very much!

Hello,
In criteria, you have not selected any columns, seems
You should select atleast one column in criteria...
and in Row Format of ticker view, write the text that you desired... as naresh said..
If you have not written anything in Row Format, by default the column values will be displayed in ticker view

PPt's not loading from Content Library

One of my co-workers is having an issue with PPT's not loading into her meeting room from the Content Library. Once pulled into the meeting room, the doc looks like it is loading, however it stays in that mode and never loads. Any thoughts or ideas why this may be happening. Thanks!

First I uploaded the ppt into my content library. Tried to open it in my meeting room and it would not open. Next I converted it into a pptx and had the same results. From the content library and from using the url in a browser I cannot open the document. If this is a permission issue, how do I know the permission settings and how to I change the settings if needed.
Also there is no animation in the ppt, however there is some graphic that I don't belive should have any thing to do with the issue.
Thank you for you help.
Lynn

Some accounts in 0ACCOUNT hierarchy MD not loading from ECC

Similar Messages

Maybe you are looking for