Some ADDS and MODS are taking over 10 seconds to perform using SJSDS 6.0

Please see [http://forum.java.sun.com/thread.jspa?threadID=5313954|http://forum.java.sun.com/thread.jspa?threadID=5313954] as I am not sure why it has been posted in Sun Identity Manager. thanks

Please see [http://forum.java.sun.com/thread.jspa?threadID=5313954|http://forum.java.sun.com/thread.jspa?threadID=5313954] as I am not sure why it has been posted in Sun Identity Manager. thanks

Similar Messages

  • Fan and Sleep mode are taking over!

    I have read through many of the posts, but my problem still appears slightly different.
    My computer will start up normal and the fan will be running silently and then get increasingly loud (like a plane taking off). Then, if more than one or two windows are open (with the fan still racing) the computer will put itself to sleep. I will click on the mouse and the computer will wake up for maybe 5 seconds before sleeping again, until finallly I just have to shut it off and leave it for a bit. The computer does not seem hot at all, either.
    Is this the midplane power thing? (the serial number does fall within the range) Or is it something else?
    I have noticed that the computer will most often fall asleep when Internet Explorer is running. Could this also be part of the problem?
    iMac G5    

    After discussing Apples with friends, it is apparent that the iMac has a strong will for survival. It knows when bad things are happening and will shut down, cool off or stall, all to save itself, which is a good thing.
    So, yes I think you have a hardware problem, you will need info like, when did this start, how long it's been going on, new software, new hardware, new preferences etc etc etc... Good Luck, Rick
    iMac G5 iSight 20" - 30G iPOD in Slimming Black- HP Pav and Toshiba Sat Laps   Mac OS X (10.4.6)  

  • I'm currently updating the 'OS X Yosemite v10.10.3 Update' and it's taking over 10 hours! Has anyone else had this experience?

    I'm currently updating the 'OS X Yosemite v10.10.3 Update' and it's taking over 10 hours! Has anyone else had this experience?

    Hi AP_In_Surbiton,
    I am really sorry that you have had so much trouble getting your Caller ID up and going.  I'll be happy to help you out with this and get it working for you.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How do I delete the photo albums on my iPhone 4? These photos, albums and videos are taking up space and besides this, I WANT THEM OUT! I have iTunes on my Windows

    How do I delete the photo albums on my iPhone 4? These photos, albums and videos are taking up space and besides this, I WANT THEM OUT! I have iTunes on my Windows 7
    I can connect the iphone to the computer. i can open iTunes,
    I don't know how to delete the photos and the albums that streamed in and otherwise came in and or doubled into albums that i did not create. Videos too.
    i did turn off streaming.
    would someone please tell me how....
    I've heard that it can be done and then something about syncing...no idea how to sync either....only that when I hook up the cord to the computer, my iPhone 4 dings...
    i need basic step by step...and alot of patience! thanks
    I have iO7 something, which I'm really not fond of either....any way after the photo/album deleting...I'd like to find out how to get rid of this update

    Assuming you are using iTunes 11.1:
    Connect your iPhone to your computer.
    In iTunes towards the upper right of your screen you will see the name of your iPhone. Click on it (not the eject symbol.
    This will open a series of windows with tabs.
    Select the tab for photos.
    Untick the ones you do not want on your iPhone and at the bottom right click on Apply.
    They will be removed.

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a simlar issue like this when loading my movies to my iTouch. iTunes says that all of your wanted content is sync and your iPod says that all content wasn't synced, is that what you are saying?

  • Rokr: "Some files and applications are not accessible"

    Help please? When using USB to connect to my ibook the phone gives me this message: "Coneced as Storage Device: Some file and applications are not accessible". I then go to my desktop and search through my phone to find no files not to mention not showing up in iTunes. Could someone please help?

    I am having a similar problem.
    My RoKr was connecting and syncing properly until I performed the latest software upgrade (which upgraded both iTunes and iSync). After the upgrade my phone does not show up either in iTunes or on the desktop. When I plug the phone it indicates that it is connecting as a storage device and some file/applications will not be accessible. However the phone does not appear on the desktop or in iTunes. When I go into iSync the phone is only recognized via bluetooth, the USB connection is not detected.
    I remain tuneless and await a solution...
    PowerBook G4   Mac OS X (10.4.2)  

  • Why do iPhones/iPad not support Flash Player/Java and what are my alternatives for browsing sites using these plug-ins?

    Why do iPhones/iPad not support Flash Player/Java and what are my alternatives for browsing sites using these plug-ins?

    There are also iSwifter, Photon, Skyfire, etc., some only support Flash some support Java and Flash.
    Adobe never made a version of Flash for iOS and closed their mobile flash division a couple of years ago. You can get Flash on other personal devices but you will be using a 2 year old version that has not been patched for security vulnerabilities.
    When the original iPhone was released Mr. Jobs said it would never run Java as it was old technology and a security risk. Nothing has changed since.

  • How do I find out how much space OSX and applications are taking up on my HDD?

    I am thinking of moving my OS and all applications to a SSD to free up space on my MBP.
    My question is how do I find out how much space OSX and installed applications are taking up on my HDD so I know how big the SSD needs to be?  Also, what is the best way to move these files across to the new SSD once installed?
    Many thanks,
    Andrew.

    If you do command-click or right click on your hard drive and select get info, it will tell you how full the HD is.
    there are some apps that can show you exactly how big particular apps are
    GrandPerspective
    Disk Inventory X
    I replaced my internal drive with a SSD for performance reasons a few months ago. There are a number of ways to move your files over to the new SSD. I am a fan of the clean install, which might take a bit more time and effort but results in a very fast and trouble free mac. An easy way to do this if you are replacing your internal drive is to put the old drive in an external drive enclosure. Then you install the new SSD and install mavericks on it. In my case I used Diskmaker X to make a Mavericks installer (DiskMaker X (formerly Lion DiskMaker) . Then you can reinstall your apps from scratch, and finally move your documents over from the external drive.

  • Premiere 5.5 taking over Second Monitor when minimized

    I am using a second monitor as an HD Fullscreen preview for Premiere 5.5. It has this annoying habit of taking over the second monitor (whatever frame I happened to be parked on) while the program is minimized. The only way to get back cotnrol of the monitor is to maximize then send to the background again. This is very annoying when you are operating back and forth between Pr and Ae or trying to do anything else on the second monitor.
    It seems to happen when it auto saves (which I have set at 5 minutes.. Yeah, I'm paranoid). I have the "Disable video output when in background" button selected, so what gives? This is the second Premiere 5.5 set-up I've had with this issue.
    Thanks for any feedback!
    And yes, the fullscreen video preview popped up THREE times while I was composing this message.

    Then download this Intel driver and install first. Then run the Nvidia driver after restart.
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3319&DwnldID=23377&ProductF amily=Graphics&ProductLine=Laptop+graphics+drivers&ProductProduct=2nd+Generation+Intel%c2% ae+Core%e2%84%a2+Processors+with+Intel%c2%ae+HD+Graphics+3000%2f2000&DownloadType=Drivers& OSFullname=Windows+7+(64-bit)*&lang=eng
    Once you have that done open the Nvidia control panel on Restart. Select manage 3D settings. See if you see a Preferred GPU or Graphics card drop down on the right. If so select the Nvidia or performance option. I forget what is exactly said there. That is the Optimus control and will make sure the Nvidia GPU is used most often. That keeps the anomalies you are getting now when the video is switching to the Intel Adapter when you minimize Adobe. If that doesnt work then there may not be a fix for this beyond disabling the Intel adapter.
    Eric
    ADK

  • Some Master and transaction loads  taking long time in R/3 extraction andBW

    Hi Experts,
    We have some Master and transaction loads which takes long time in source system(R/3) in BW as well in daily process chains.These loads are happening in daily basis.
    In Extraction ,they takes long duration to finish.
    And then BW also takes much time.....
    So pls give some suggestions ,by which we can reduce this duration....
    And what can we do improve these loads perfomances......
    your  small suggestion can improve loads performance......
    thanx in advance.....

    hi naveen,
    go back and have a look at ur infopackage .. for the no of data packets it is picking up for each time ....
    this can be done by going to scheduler in the menu and u can find the no of data packets and the size as well....
    hope this works ...
    snigdha  >>>

  • Black Area taking over screen

    So whenever I press play in logic express this huge black area takes over the screen behind the play head and moves along with the playhead. I don't know what to do to get rid of this huge black/dark display.

    It's virtually the same program these days.
    It would help if the OP posted the version he/she was using and what updates are installed.
    pancenter-

  • HT1473 I am attempting to import my CD's but I'm finding some songs and albums are not being accepted.  Any ideas what I'm doing wrong?

    After attempting to import music from CD's I am seeing that some of the tracks are not listed in my iTunes library and in some cases, whole albums are missing.  Any suggestions on what I am doing wrong or how to correct?

    Now that we've established that you have the CD correctly imported into iTunes, we can move on from there.
    Connect the iPod to iTunes. When it shows up as a Device (in the left window of iTunes) select it. You will be looking at the Summary tab (or pane).
    On this pane, my choice is to have the option to Sync only ticked songs and videos selected. I recommend this option for you. This is relevant to the next step.
    At the top of the pane select Music. On this pane, check the options for Syncing. You need to have Sync Music selected and then choose either Selected Playlists (which will only put your choice of Playlists onto your iPod) or Entire Music Library. If you select "Entire Music Library" then all your songs (one exception) will be transferred to your iPod.
    The exception is: if you un-tick a song in your iTunes Library, then at the next Sync, it will be removed from the iPod but kept in your Library.
    Any luck?

  • Auto loading of username and password are taking place on one site and only one site and I do not want this to happen but can"t get it to stop.

    As my question states I don't want auto loading on any site and it only happens on this one site. I have went thru tools and options and there are no sites listed for auto loading. There are no saved passwords. If I go to the site using Internet explorer the problem does not occur.

    Ok, no problem i found this help articles:
    https://support.mozilla.org/en-US/kb/how-clear-firefox-cache
    http://www.youtube.com/watch?v=OukBlXfOP8Y

  • Report Title and Text Area issue when exported to pdf using Viewer

    Hi there,
    We are using OracleBI Discoverer Version 10.1.2.55.26
    We have reports that displays Report title containing the following
    - Report Title
    - Runt Date and Time
    - Page No
    And text area which displays 'Last Page'
    Following properties are set at the worksheet level using page setup
    Report Title --> 'Print on every Page'
    Text Area --> 'Print on last page'
    The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
    But when we try to export the same report to pdf from Discoverer viewer, it displays
    - Report title on first page only.
    - text area on all pages
    All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
    Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
    Please let me know... If you have any questions then please feel free to ask.
    Thanks in advance for your help...
    Manish

    but when opened on other os x machines some text is colored differently than it should be
    Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
    In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
    If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
    /hh

Maybe you are looking for