Some advice required

Hi all,
I am hoping that some of you might be able to offer some advice.
I am looking to put a JDeveloper / Oracle development environment on my newly purchased MacBook Pro (after 15 years as a PC user). I have installed JDeveloper (and as a .NET developer am impressed with what I see) but need an Oracle back end to close the loop.
I don't need the full Enterprise version, and XE will suffice, but should I install locally on my MacBook, or put it on the server (my old PC) on my home network. I also run XP on parallels (for work). What is the ideal setup? What are the pitfalls and hurdles?
Any advice will be gratefully received.

Hi,
There's been much wailing and gnashing of teeth among your fellow MacTel owners, because there is no release of Oracle database server for the Intel-based Macs. I'd suggest installing the server software on the old PC. You could always try out the shiny new Oracle Linux distribution on the PC if you were feeling adventurous. :)
Good luck!

Similar Messages

After some advice, I am new to Apple and looking to purchase either the MacBook Air 13inch with 256GB and 8GB mem or the MacBook Pro 13inch with retina 256Gb and 8GB mem. I am an assistant principal in a primary school and also studying my masters

After some advice, I am new to Apple and looking to purchase either the MacBook Air 13inch with 256GB and 8GB mem or the MacBook Pro 13inch with retina 256Gb and 8GB mem. I am an assistant principal in a primary school and also studying my masters at university. I don't play computer games and I don't watch movies. I do store photos and videos of my kids and music on iTunes. I also like browsing the net with numerous windows open, check email etc. I am really wanting long battery life as I do a lot of my work on the couch - not close to a PowerPoint. Would the air do the trick or will it soon be outdated as Apple move towards retina display? Both air and pro seem very thin - almost the same? And not much difference in weight either so both very portable which is also a necessary requirement. Just can't help dreaming about that 12 hour claimed battery life. Any helpful advice/opinions, very much appreciated. Thanks

It's not likely that you'll get 12 hours in reql life. Those benchmarks are set under very strict controlled conditions. Kind of like mileage per gallon claims on cars. If 16GB of ram is an option at all I'd highly recommend you get that. As far as storage 256GB isn't alot, consider storing some things on an external thunderbolt real

Need some advice on a new build for CS5 Web Premium

I am looking for a powerful PC that I can use mostly for work and some light video work. I have been looking at several systems, but I can't decide if I should get the Core i7 875K, 950 or AMD 1090T for my needs.   I typically have many Adobe CS5 applications open at once like Photoshop, Dreamweaver, Illustrator and Flash, iTunes, Quickbooks, Microsoft Work and Excel. I would ideally like to buy a pre-built rig, but I can surely put together if better. Below are a few I have been looking at, but I am unsure about cooling on one of them and about the 875K processor on the other one. I figured a gaming PC would be fast and powerful as my needs are behond a standard base config. I would like some advice also on a good video card. Been looking at crossfire ATI HD 5770, single ATI HD 5870, Radeon 6870, and GeForce GTX 470 and SLI GTX 460. I am not a typical overclocker, but I can be if it will help performance running apps. I leave my PC on all day and night so cooling is a factor.
Thanks in advance everyone for the advice on this.
==========================================
Approximate Purchase Date: (the closer the better)
Budget Range: ($1000-$1500)
System Usage from Most to Least Important: (Web Development, Graphic Design, Internet, Movies))
Parts Not Required: (keyboard, mouse, monitor, speakers)
Preferred Website(s) for Parts: (newegg.com)
Country of Origin: (USA)
Parts Preferences: by brand or type (I would like to use an Intel Core i7 or AMD X6 CPU to power dual Big 27" Samsung LCDs via DVI and full or mid tower case)
Overclocking: Maybe
SLI or Crossfire: Maybe
Monitor Resolution: (1920x1080 each monitor)
=========================================
Here is my latest config. How does this one look?
Qty.
Product Description
Savings
Total Price
1
COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel ATX Full Tower Computer Case Item #: N82E16811119160Return Policy: Standard Return Policy
-$30.00 Instant
$159.98$129.98
1
Western Digital Caviar Black WD1002FAEX 1TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive Item #: N82E16822136533Return Policy: Standard Return Policy
$89.99
1
EVGA 012-P3-1470-AR GeForce GTX 470 (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card Item #: N82E16814130550Return Policy: VGA Replacement Only Return Policy
$259.99
1
Nvidia Free Mafia 2 Game Coupon Item #: N82E16800999247Return Policy: Standard Return Policy
-$59.99 Saving
$59.99$0.00
1
CORSAIR HX Series CMPSU-850HX 850W ATX12V 2.3 / EPS12V 2.91 80 PLUS SILVER Certified Modular Active PFC Power Supply Item #: N82E16817139011Return Policy: Standard Return Policy
-$30.00 Instant
$20.00 Mail-in Rebate Card17-139-011
$189.99$159.99
1
G.SKILL Ripjaws Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9T-12GBRL Item #: N82E16820231358Return Policy: Memory Standard Return Policy
$269.99
1
LG Black 10X Blu-ray Burner - Bulk SATA WH10LS30 LightScribe Support - OEM Item #: N82E16827136181Return Policy: Standard Return Policy
$109.99
1
Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Quad-Core Processor BX80601950 Item #: N82E16819115211Return Policy: CPU Replacement Only Return Policy
ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Item #: N82E16813131665Return Policy: Standard Return Policy
-$5.00 Instant
-$14.99 Combo
$499.98$479.99
1
Crucial RealSSD C300 CTFDDAC128MAG-1G1 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) Item #: N82E16820148348Return Policy: Limited Replacement Only Return Policy
Microsoft Windows 7 Professional 64-bit 1-Pack for System Builders - OEM Item #: N82E16832116758Return Policy: Software Standard Return Policy
-$10.00 Instant
-$30.00 Combo
$419.98$379.98
Subtotal:
$1,879.90
Calculate ShippingZip Code:    13662   FedEx 3Day Express Saver -- $145.44FedEx 2Day -- $219.19FedEx Standard Overnight -- $263.21UPS Guaranteed 3 Day Service -- $15.97UPS 2nd Day -- $127.74UPS Next Day Saver -- $135.95
Shipping:
$15.97
Redeem Newegg Gift CardsCard Number:                                          Security Code:
Apply Promo Code(s):BFMB
Click here to clear promotion code(s).
Sorry, the promo code BFMB you've entered is invalid.
Promo Code:
$0.00
No Interest if paid in full in up to 12 Months. Minimum purchase required.
Subject to credit approval. See Terms
Grand Total:
$1,895.87

Here is the final config I am looking to get. I am just debating the hard drive config and video cards. I want to be sure my video card will use teh GPU Accelleration and Advance features of Photoshop CS5. Do you know if the NVIDIA GTX 460 is compatable or should I spend more for the 470? I will not be gaming much and this pc is used mostly for work on CS5 Web Premium. How does this all look? All prices from NewEgg. I have another machine I will backup sata to each evening, so I really want a fast drive for program load and operation and another drive for data. What is best way to config drives? Should I get 2 of them and an SSD?
Qty.
Product Description
Savings
Total Price
1
EVGA GeForce GTX 470 (Fermi) 012-P3-1470-AR Video Card
Item #:N82E16814130550
Return Policy: VGA Replacement Only Return Policy
$259.99
1
Nvidia Free Mafia 2 Game Coupon
Item #:N82E16800999247
Return Policy: Standard Return Policy
$59.99
1
COOLER MASTER HAF 932 RC-932-KKN1-GP Black Computer Case With Side Panel Window
Item #:N82E16811119160
Return Policy: Standard Return Policy
-$30.00 Instant
$159.98
$129.98
1
G.SKILL Ripjaws Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory
Item #:N82E16820231358
Return Policy: Memory Standard Return Policy
$269.99
1
LG Black 10X Blu-ray Burner - Bulk SATA WH10LS30 LightScribe Support
Item #:N82E16827136181
Return Policy: Standard Return Policy
$109.99
1
CORSAIR HX Series CMPSU-850HX 850W Power Supply
Item #:N82E16817139011
Return Policy: Standard Return Policy
-$30.00 Instant
$20.00 Mail-in Rebate Card
$189.99
$159.99
1
Western Digital Caviar Black 1TB 3.5" SATA 6.0Gb/s Internal Hard Drive -Bare Drive
Item #:N82E16822136533
Return Policy: Standard Return Policy
$89.99
1
ASUS Sabertooth X58 ATX Intel Motherboard
Item #: N82E16813131665
Return Policy: Standard Return Policy
Intel Core i7-950 3.06GHz LGA 1366 130W Quad-Core Processor
Item #: N82E16819115211
Return Policy: CPU Replacement Only Return Policy
-$5.00 Instant
-$14.99 Combo
$499.98
$479.99
1
Microsoft Windows 7 Professional 64-bit 1-Pack for System Builders
Item #: N82E16832116758
Return Policy: Software Standard Return Policy
Crucial RealSSD C300 CTFDDAC128MAG-1G1 2.5" MLC Internal Solid State Drive (SSD)
Item #: N82E16820148348
Return Policy: Limited Replacement Only Return Policy
-$10.00 Instant
-$30.00 Combo
$419.98
$379.98
Grand Total:
$1,879.90

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

Looking for some advice on CEP HA and Coherence cache

We are looking for some advice or recommendation on CEP architecture.
We need to build a CEP application that conforms to the following:
• HA with no loss of events or duplicate events when failing over to the backup server.
• We have some aggregative rules that needs to see all events.
• Events are XMLs with size of 3KB-50KB. Not all elements are needed for the rules but they are there for other systems that come after the CEP (the customer services).
• The XML elements that the CEP needs are in varying depth in the XML.
Running the EPN on a single thread is not fast enough for the required throughput mainly because network latency to the JMS and the heavy task of parsing of the XML. Because of that we are looking for a solution that will read the messages from the JMS in parallel (multi thread) but will keep the same order of events between the Primary and Secondary CEPs.
One idea that came to our minds is to use Coherence cache in the following way:
• On the CEP inbound use a distributed queue and not topic (at the CEP outbound it is still topic).
• On the CEPs side use a Coherence cache that runs on the CEPs JVMs (since we already have a Coherence cluster for HA).
• Both CEPs read from the queue using multi threading (10 reading threads – total of 20 threads) and putting it to the Coherence cache.
• The Coherence cache is publishing the events to both CEPs on a single thread.
The EPN looks something like this:
JMS adapter (multi threaded) -> replicated cache on both CEPs -> event bean -> HA adapter -> channel -> processor -> ….
Does this sounds sound to you?
Are we over shooting here? Is there a simpler solution for our needs?
Is there a best practice for such requirements?
Thanks

Hi,
Just to make it clear:
We do not parse the XML on the event bean after the Coherence. We do it on the JMS adapter on multiple threads in order to utilize all the server resources (CPUs) and then we put it in the replicated cache.
The requirements from our application are:
- There is an aggregative query that needs to "see" all events (this means that we need to pass all events thru a single processor and we cannot partition them to several processors).
- Because this is a HA solution the events on both CEPs (primary and secondary) needs to be at the same order when reaching the HA inbound adapter and the processor.
- A single thread JMS adapter is not reading the messages from the JMS fast enough mainly because it takes time to parse the XML to an event.
- Using a multi-threaded adapter or many single threaded adapters with message selector will create a situation that the order of events on both CEPs will not be the same at the processor inbound.
This is why we needed a mediator so we can read in multiple threads that will parse the XMLs in parallel without concerning on order of messages and on the other hand publish all the messages on a single thread to the processors on both CEPs from this shared mediator (we use a replicated cache that runs on both JVMs).
We use queue instead of topic because if we read the messages from a topic on both CEPs it will be stored twice on the Coherence replicated cache. But if we use a queue, when server 1 read the message and put it in the Coherence replicated cache then server 2 will not read it because it was removed from the queue.
If I understand correctly you are suggesting replacing the JMS adapter with an event bean that will read the messages from the JMS directly?
Are you also suggesting that we will not use a replicated cache but instead a stand alone cache on each server? In this case how do we keep the same order of events on both CEPs (on both caches)?

ITunes (11.3 64bit) cannot run because some its required files are missing. Please reinstall iTunes.

just set up my new laptop lenovo x240.
Windows 7 SP1.
itunes 64bit 11.3
first install went fine. then I tried to move my preexisting library. the library did not show the apps. so I tried around. Treid to re-install itunes.
Since I did, after the re-install, iTunes gives me the error message "iTunes cannot run because some its required files are missing. Please reinstall iTunes."
I tried the -_> link: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
unfortunately it did not resolve. please, advise... I am quite desperate... and surprised this is happening, since I am on a clean corporate laptop.
perhaps, can someone also steer me to a corner, where I can deactivate the cloud install pop-up ones starting iTunes?

See the advice given in the user tip:Troubleshooting issues with iTunes for Windows updates for a very workable approach.

Document storage advice required

Good day,
Our developers are doing a project that involves processing Purchasing Invoices that have been scanned and converted to PDF. They are using ArchiveLink and at the moment are storing these documents directly in the database. They(developers) were under the impression they were simply linking the documents from the file system but I don't think that is correct. It is still under development.
Anyway, to cut a long story short I would just like to know if there are any other implications to storing approximately 2000 x 130kb PDF documents on average per month in a ERP database ? I know it will eventually effect our backups and restore times but as far as MaxDB is concerned is the database usually configured in a specific way to handle this kind of thing like on Content Management Server ?
I would like them to move the documents to Content Management Server or a 3rd party solution like ImageNow and just need some advice.
Many thanks.
Regards,
Nelis

After doing some more research I came across notes 653774 which states "..file repositories have been eliminated as of Basis Release 6.10. If a file repository is used in a live system, the data can no longer be addressed after a release upgrade to Basis Release 6.10 (or later version)." ...so that will prove helpful
Also note 595663 gives information on using ArchiveLink with database storage and mentions it should only be used with smaller datasets, for production SAP Content Server should be used.
This more or less gives me the info I require.
I'm still curious to know whether MaxDB is specifically setup differently on Content Server to handle large volumes of binary documents ?
Nelis

Need some advices with OBIEE

Hi guys,
At the moment I am doing an internship somewhere, and I am supposed to visualise some data from an Oracle database into a Google Map.
The data should be fake, because the application will be a showcase.
I need some start-up hints, because actually I don't know where to start and with which programs.
First of all a little background.
The following programs are installed on my laptop:
- Oracle DB (1013)
- Oracle Example Schemas
- Oracle WebLogic (103)
- Oracle BI enterprise (101340)
- JDeveloper
This is what I want:
- Create a database or schema with fake data. The fake data should consist of addresses. (for the Google Map)
- The combination with BI enterprise is a requirement, part of the internship programme.
- Combination with Google map functionality.
Maybe someone can give me some advices in how to begin. Which techniques I should use or some useful tutorials.
I would really appreciate if someone can give me a heads up!

The [Oracle by Example|http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/index.html] website has many good step by step tutorials on OBIEE so that would be a good start. Having said OBIEE doesn't support "heat maps" or overlaying data on maps out of the box. They are some 3rd party tools out there but I don't think you want to go there. From my point of view anyone asking you to use OBIEE to overlay data on Google Maps doesn't know what OBIEE should be used for (and probably doesn't know Google Maps either).

Similar functionality to Google/Outlook Calendar advice required

Hi all,
I have built an Apex app that is used to create jobs and assign them to an engineer. It is a straightforward app and we are now looking at adding some new functionality, specifically I have been asked to provide a diary type view of the jobs scheduled for each engineer to help with the allocation of new jobs.
I have tried the out of the box Calendar region in Apex and it isn't quite what I require and I was wondering if anyone had some advice and guidance that they could offer to help me out?
The easiest way to describe what I would like to achieve is a Day view similar to the Google Calendar interface, or Outlook Calendar, where you have the hours of the day down the side of the page and for each engineer their jobs that have been scheduled for that day is shown in a block that covers the time that the job has been scheduled from and to i.e. 9am - 10.30am.
I have searched this forum and the internet for something similar that I could adapt but have so far have not found anything, I love the example in this post:
[http://rutgerderuiter.blogspot.com/2008/07/drag-planboard.html|http://rutgerderuiter.blogspot.com/2008/07/drag-planboard.html]
however I think it is not quite what I require and is more advanced than my simple JavaScript skills could handle!
In order to visually illustrate what I have in mind, the following is a good example:
[http://www.pioneerinteractive.com/screenshots/sched-day-view.JPG|http://www.pioneerinteractive.com/screenshots/sched-day-view.JPG]
My data is structured pretty much as you would expect where there is a table of jobs with columns for job no, engineer, date start time & date end time, job description.
If anyone can provide me with some tips on how to achieve what I have explained, or even a different approach that you think would satisfy what I have discussed then I would really appreciate it.
Best regards,
Stu

I've found a work-around to this. I import the ICS event into "Calendar", then visit it in iPhone Calendar and change its calendar to Google Calendar, it then synchs properly.

I could use some advice and perhaps some help

i recently brought iphone 4 apparently you need snow leopard for your mac to work so i went to best buy brought snow leopard i tryed installing it my mac saids i need to upgrade my ram so for me to have my iphone 4 i need to do these things my question is if i make an appointment in the apple store genus bar how quickly do you guy think they can resolve this issue meaning a few min to a few hours or days please could use some advice also if you happen to know a work around that would be appreciated
i am also have trouble sycing any type of video podcast or movies from my library to my iphone 3g i am using macbook g4 i think

SuperMarioNES wrote:
i recently brought iphone 4 apparently you need snow leopard for your mac to work so i went to best buy brought snow leopard i tryed installing it my mac saids i need to upgrade my ram so for me to have my iphone 4 i need to do these things my question is if i make an appointment in the apple store genus bar how quickly do you guy think they can resolve this issue meaning a few min to a few hours or days please could use some advice also if you happen to know a work around that would be appreciated
i am also have trouble sycing any type of video podcast or movies from my library to my iphone 3g i am using macbook g4 i think
You can not run snow leopard on non intel macs. You have a g4. Ip4 requires leopard 10.5 not snow leopard so return it. You should not need more RAM how much does your machine have?

Dell Live! Value Soundblater card!!!! Need some advice

I have an old 400 that has this card installed model #CT4780. I have purchased a new Dell E30 and want to install this card in it. I have downloaded the driver pack Li'veDrvUni-Pack(ENG).exe. This was listed on the website as the correct one for XP. I notice that in the old computer there is a cable from the card to the CD-Rom and also one from the card to the modem. Are these cables need in the new computer? Also will I have a conflict with the integrated sound card that came with the new computer? I have not done anything expect download the driver pack.
I know some about computers but do not like to install boards and new computers fearing some thing will go wrong. I need some advice and the procedure before I preceded. Any help would be greatly appreciated. Thanks

Newer operating systems, computers, & audio cards do not require the use of the cable from the CD Rom to the soundcard. It is now handled via the IDE cable. Being that you only upgraded half of this equation (that being the computer and not the soundcard), this may be a "trial & error" situation. I do not have the experience with modem cards to comment on that one.
Finally, you will need to disable the onboard soundcard via the motherboard's Bios. Look in the MB's manual to perform this action.
Message Edited by johnston2 on 0-25-2006 06:49 PM

Need some advice on re-install

Hi All
I want to (well I have to) look to re-install from scratch - I am using a Macbook Black and have an issue with Ical, which meant re-installing the ical software
this is deeper routed as the ical issue is still there and althoug I have deleted the software, rebooted and re-instaleld is still there
I would like some advice, as I have done this on a windows machine (after all with windows reinstalling is a annual requirement!!!
1)Firstly is there anywhere that will advice on this process of clearing down my hardrive and reinstalling only what I need
2) can I copy my application folder to my external drive and just move back things that I wish to reinstall
3) how do I back up settings (I dont want issue with settings that may have affected my current instal and corruped Ical
4) is there any files/folders that I should definetly take a copy of
5) and is there any one with experience of doing this, eg rights and wrongs
I'm worried as I use the laptop for both work and pleasure and dont have alot of time to devote to this, with windows I could do this type of thing in about 2 hours any ideas on how long it will take
and how do I wipe the drive?
Thanks in advance

Or, Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Boot from it and make sure everything works.
Once you are certain you have a working/bootable external Firewire Drive, then run Disk Utility to Erase the Internal HD, use the Zero Data Option.

Need some advice about hot backup under linux

hi, I want some advice about db files hot backup between two machines(Named A and B).A is primary machine which will write and read database and have the lastest db file. B is backup role and no database file in it.
Now I want hot backup A's db file to B in order to B have the lastest db file too.
At A,my db file support transaction and environment, and I set autoremove unnecessary log files.
The code such as follows:
dbenv->set_flags(dbenv, DB_AUTO_COMMIT |DB_LOG_AUTOREMOVE | DB_TXN_WRITE_NOSYNC, 1);
ret = dbenv->open(dbenv, NULL,
DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN ,0)
I don't want to use db_hotbackup utility. and db_hotbackup may be backup files to the same machine with different dir.
How can I make machine A's db files backup to machine B.
Thanks for your help.
Best Regards
hangsy

Hi Hangsy
Now I want hot backup A's db file to B in order to B
have the lastest db file too.What do you mean? Do you want to have the latest version... from when you did the latest backup, or you want to keep it updated in the same time with the main database?
I don't want to use db_hotbackup utility. and
db_hotbackup may be backup files to the same machine
with different dir.You can copy the backup anywere you want.
If you want to run recovery on a different machine, it must be the same pointer size and endianness as the original machine.
Database and log file archival: http://www.oracle.com/technology/documentation/berkeley-db/db/ref/transapp/archival.html
It is usually simpler to take the hot backup on the main machine and run recovery there before copying the databases to the remote system.
In this setup, only the databases are required on the remote system, not the log files.
Since you are using NOSYNC, you should run a checkpoint which will ensure you that the database files are up to date.
Please read "Recovery procedures" ( http://www.oracle.com/technology/documentation/berkeley-db/db/ref/transapp/recovery.html ) first. "you cannot perform a hot backup of databases and log files, restore the backup and then run normal recovery -- you must always run catastrophic recovery when using hot backups."
Regards,
Bogdan Coman

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

I need some advice on replacing my ipod touch 4th generation screen. The silver plate won't go back into it's original place and i can't put the screws back in. I really need help i don't want my ipod to be broken!!!

I started to replace my ipod 4g screen but the silver plate that goes on top of the battery won't go back into place. It's not lining up with the screw holes so i can't finish the repair. Please I'm begging you all to help me with some advice and tips!!!!!!!!!!!!!! It will be greatly appreeciated. ASAP

Your best bet is to email the company that sold you the screen for advice. Or you could search on YouTube for repair instructions. Hopefully, you will see where you went wrong. Apple will not do an out-of-warranty replacement on an iPod that has been opened.

Some advice required

Similar Messages

Maybe you are looking for