Some albums getting listed as Various Artist in Cover flow only

eg
Velvet Revolver - Contraband
Husker Du -Land Speed Record
The Killers - Sawdust
The above albums appear in the Correct place under the artists name in Portrait mode on the ipod but, when viewed in cover flow - the appear as being "various artists"
I have 32gb 3.5gs
Anyone know how to fix this?
I have re-type the artists name, then re-sync - still appears in the same place

I had the same problem after I updated to the most recent 3.0 firmware on my iPhone 3G.
I managed to fix the same problem you describe by:
1) Making sure the "Part of a Compilation" field is set to "No". For multiple files, you select them, "Get Info" and on the "Options" tab, you will see this setting. For one file, it will be on the "Info" page.
2) Making sure "Album Artist" is either blank or set correctly.
Number 2 only came up on 1 or 2 albums that were not displaying properly on CoverFlow (i.e., showing up under "Various Artists"). Number 1 is what fixed the rest of my albums (around 10 full albums or so).
Hope this helps other people. To save time, I would suggest using the Shift button to select the entire album and do what I recommend under #1.
Cheers.

Similar Messages

  • Why is it that some songs get listed on their own even though they are part of an album?

    Why is it that some songs get listed on their own even though they are part of an album? They are always songs that I had on my computer not imported from a cd using iTunes. I have verified that all the info is correct and matches the other songs in the album. Sometimes I can check the "compilation" box on all the songs in the album and that will put them in order and in the same listing. I'm pulling my hair out trying to figure this out.

    Good One CL.
    What I did in this case is select all the songs in the album and select Get Info and see if  Album Artist and Album and Sort Artist and Sort Album Artist and Sort Album are the same.

  • Some albums not listed under artist.

    Some albums appear in the Albums list but not in the Artist/Album submenu.
    eg; I have 2 albums by Sigur Ros but only one shows when I go:
    Artist/Sigur Ros - Album.
    I only see one.
    I see both under the Album list.
    Any thoughts appreciated...

    It could be that you have inadvertently imported these CDs into iTunes as part of a compilation. If so, the artists won't show in the artists menu on the iPod.
    To check, highlight the tracks on one of the offending artists CDs in iTunes, right click and select "get info". This brings up a multiple song info window, and from there you can check if you have 'yes' in the box marked "part of a compilation".
    If you have, select 'no' instead and click 'ok'. Do this with any CD that has this issue. This will alter the info in iTunes, and you should then connect your iPod and synchronize the changes.
    The problem arises because the information contained on the Gracenote CD Data Base (where iTunes gets all it's album/artist/track info from), is sometimes incorrect. It can show CDs as compilations when in fact they are not.

  • How to get rid of "Various Artists" on iTunes?

    I have a couple soundtracks from films, but all the songs are by the same artist for each soundtrack (Teddy Gieger - The Rocker, Neil Patrick Harris - Dr. Horrible's...), and I'd rather have the artists' names on my iTunes than have all my soundtracks put into one "Various Artists" catagory. I've taken off the "album artist", changed it from "Various Artists" to the name of the artist, changed the genre from "soundtrack", and unchecked "part of a compilation", but when I sync my 4S, it still shows up as "Various Artists". Is there any way to get rid of this?

    I had the same problem; it was really annoying. I finally figured out how to fix it though.
    Go to the artist "Various Artist" on your ipod. View all the songs and delete them all from your ipod/iphone whatever. You might want to write down which songs are under the "various artist" category so you can remember which ones to add back. Go to the Itunes library and go to the info for each song that you just deleted from your ipod and uncheck "part of a compilation" and where it says "artist album" replace "various artists" with the actual artists name.
    When you're finished the various artists category should be gone and all the artists should appear individually.

  • Making an album with singles of various artists.

    I have Googled this query but so far I have not had any luck.
    I have a number of singles from various artists bought through amazon mp3 that I would like to merge into one Album of singles. I have changed all their Album names to Singles and ticked the box to make them part of a compilation. I havel also amended track numbers but it has failed to merge them into one album. I now have numerous singles all with the same album name xD
    Any tips would be greatly appreciated =/

    Hi, welcome to Apple Discussions.
    Change the Album Artist to *Various Artists* and enable the iTunes preference to *Group compilations when browsing*.
    For more info see http://www.samsoft.org.uk/iTunes/grouping.asp
    tt2

  • Enable artist overview, cover flow on ipod AND artist column in iTunes...

    Greetingz
    Here's the problem:
    I want to enable the artist column in iTunes for all my music.
    I can already do this with genres and albums, and its so convenient.
    However the artist column is showing only "collections" instead of -+for example Abba, Aerosmith, ACDC, ..+-
    This is because I have put everything on Complication "Yes"
    and on my ipod classic complication in the music menu is 'clicked' off. Why? so the ipod doesn't show all covers separately in the cover flow. its all good on the ipod; I can also get a list of all artists and genres. But in iTunes the artist column only gives one category and thats "complications" not like abba aerosmith acdc you name it. How can I get this right for both the ipod (remember also the cover flow as well as the artists must work correctly) AND iTunes? I find this very complicated and one of the only things I am unable to figer out.
    Many many thanks to all who help!

    "Compilation" means that the album is one of those Time-Life type "Disco Hits" or "50's Greats" CDs that aren't by one artist. I would suggest either turning off compilations for everything or going through each song and filling in the "Album Artist" field.

  • How to get rid of movie and tv cover flow

    I would like to know if there is any way that I can get rid of the itunes store movie and tv show covers that come up when I turn on my apple TV.
    I do not mind the cover flow from my own content, but I have a lot of small children who do not need to be seeing the R rated images on many of the store movie and tv show options.  It is terribly inconvient to ask my little ones to leave the room so that I can search for and load an age apportiate show for them.
    I highly recommend addressing this if it has not come up before.  Consider allowing owner chosen artwork or just a keep it blank.  Maybe put the option under parental controls.
    Please let me know if this is possible. Thanks,
    Nick

    No it's not possible and we've had a few discussions about this in the past - minors can browse/see cover art that can be innappropriate even if they cannot rent/purchase.
    If you mainly have your own content you could disable the iTunes store or maybe see if you can configure your router to allow it LAN connectivity only.
    Disabling iTunes store however still allows access to Movie trailers.
    Send feedback:
    http://www.apple.com/feedback/appletv.html

  • HT204266 If I have a play list of various artists and on this list I have two tracks from the same album how can I combine those two tracks to play as one if I am using the shuffle feature?

    An example would be Jackson Browne's "The Load Out" &" Stay".They should play one after the other but in a play
    list on shuffle setting they don't. How do I combine two songs so they play as one in a shuffled playlist

    Friveros wrote:
    When I import my music files to iTunes will I be creating new files for every file I import? If the answer is YES; where are those files going to be stored and how much space will they use?
    To begin with you can't manage FLAC in iTunes. The use of iTunes is at this moment limited to WAV, AIFF, Apple Lossless, AAC and MP3. But that's not a problem because if I understand you correctly you want to organize the MP3-files in iTunes.
    When you import music files you can let iTunes copy all files and put it in an iTunes-media-Folder. You can make the choice in preferences-->tab advanced.
    If you deselect the second blue checkbox (sorry, in Dutch) iTunes won't copy files as you import the files in your library. It will use the files from the place they are on the disk now. So you have a choice. But if you want iTunes to copy them, they will be placed in a folder called iTunesMedia. This is how it placed on your disk.
    All files will be put in one music folder well ordered by artist and albums. If you want to make a backup of all your music you just have to copy the iTunes folder to another disk. You can backup all music at once. How much space they will use depends on the bitrate of the MP3 and whether you add more tagging to it. You can have iTunes add album artwork. That means adding gif or jpg files to your library. Are you using bitrate 320 for your MP3?
    If you tell me I can give you estimates on the disk-space you will need.

  • Click one album get a totally different artist

    This just started. I click Bob Dylan's Blonde On Blonde first song and takes me to Queer As Folk. Tried this with another Dylan Album (both from cd's by the way) and it plays John Mayer. Tried signing in/out/in out etc. turned on iTunes Match (even though I thought I'd finally freed myself of this monster) and to no avail the problem persists. Luckily, I have all my music stored in AMAZON CLOUD so if-worse comes to worse-I can re-download, but seriously does anyone know what could be going on, why songs are all scrambled (all of a sudden) on just a few albums? Of course I haven't checked them all, but a sampling shows a few of my albums give me totally different songs in the play bar.

    See my previous post on Grouping Tracks Into Albums, in particular the topics One album, too many covers and Tracks out of sequence.
    tt2

  • Use Album Artists causes repeat values of Various Artists

    The obvious implication of the new *Use Album Artist* feature in the Colum Browser is that only Album Artist values will be listed and further that each will be listed only once, sorted by the value of Album Artist or Sort Album Artist. It may be that the previous build (where the feature was introduced) did just this but I have noticed that the current build with Group Compilations turned off will, for example, list the value Various Artists at multiple locations in the Artist column in the browser.
    For example, say we have a playlist with albums by Alice, Charlie, Eric & Grace together with a compilation featuring artists Bob, Dave & Fiona with an album artist value of "Various Arists".
    With *Use Album Artists* turned on and *Group Compilations* turned off I would expect I would expect the artist panel in the column browser to read:
    Alice
    Charlie
    Eric
    Grace
    Various Artists
    but what we actualy get is:
    Alice
    Various Artists
    Charlie
    Various Artists
    Eric
    Various Artists
    Grace
    In other words each different value used for Album Artist with compilations, Various Artist, Original Cast, etc. may be listed multiple times at multiple locations within the Artist column instead of just once as expected.
    So, is it just me? Anybody still on 9.1.0.79 or a Mac build care to confirm if they see the same?
    tt2

    Compilations need a value for album artist to keep them connected on an iPhone as I've noted elsewhere. However exploring the problem further it isn't even about compilations & various artists, it was just working with them that brought it to my attention. A more accurate description of the problem is:
    With the new *Use Album Artists* feature turned on the artist pane fails to re-sort when you change the value of Album Artist or Sort Album Artist and does not update until you close and re-open iTunes.
    E.g. Change "Albert King" to "King, Albert" in either Album Artist, Sort Album Artist or both and the entry in the Artists pane will stay put under A. Close iTunes and re-open and it will have moved to K.
    I have already sent feedback with a link to this thread. Again it would be useful if any Mac or Win 9.1.0.79 users could confirm if they see the same behaviour.
    tt2

  • I have 7 or 8 albums under "various artists" how do I break the albums out? individually?

    I somehow have 7 or 8 albums listed under "various artists" and I want them to stand alone, how do I "break them out"?

    Give each album its own common artist and set part of a compliation to no.
    See Gropuing tracks into albums for more details.
    tt2

  • How Can I Get My Cover Flow To Be In "Artist Order" Vs. "Its Own Order"

    *I'm A VERYYYYY Organized Person. & I Like My Music To Be In A My Library A Certain Way. AND My iPod Is Putting The Cover Flow In... I Dont Know What Kind Of Order... I Dont Even Know If Their Is A Method To Its Madness! It Seems Like It Starts In Artist Order & Then Switches To Album Order! IDK!!!! I Have All My Music By Artist (If There Is A Feature Artist I Put That Info after The Song Name. I Dont Like Looking At 10 Different Picz of The Same Album. My Music Looks Great In iTunes. But The Cover Flow Is... Just... Just... STUPID!!! Someone Please Help???? =(*

    ErikahRae wrote:
    ... It Seems Like It Starts In Artist Order & Then Switches To Album Order!
    Yes - it does! As Meg says, the coverflow order cannot be changed (or at least, I haven't found a way) and on my Classic the albums by one artist are first and in *artist alphabetical order,* followed (at the end of the artist list) by *various artists (or compilation) albums* which are in *album title order.*
    I Dont Like Looking At 10 Different Picz of The Same Album.
    Almost certainly, the reason you see several pictures of the same album is because the information in the tracks is confusing the iPod. See turingtest2's links, because they should help you sort out what is wrong.
    Phil
    P.S. you may feel that Meg was out of order with her comments about your typing, but she is right - it is difficult to read your post and if you want help, you need to make it easy for the people reading it. It's not simply some "convention" within this forum, it's standard internet protocol. Still, you live in the free world, it's your choice.

  • Problems with "Various Artists"

    Hi I have a 2 disc album that I want to list as "various artists" it's easy with first disc as there are 3 or 4 different artists on that CD that when "Compilation Album" is ticked come up as "VA" however the 2nd CD is all the same artist (Blank & Jones) so of course that will be filed under "B" I have selected all of CD 2 and ticked "part of a compilation" but this does not work, i could fudge it a bit by putting a space in one track but i'd rather not do that, so any help welcome I am using 10.6.2.35 within Win 7 U 64bit.
    All1

    Well i have been able to solve this and just thought i'd post back in case it helps someone else, as i say i have an album (Double CD) where the first CD is all "Blank & Jones" and the second CD is all "Blank & Jones" but 2 tracks, now marking both of them as part of a compliation did not solve my problem, you see i wanted them both to come up as Various Artists this would not work with CD 1 unless i changed the artiists name from "Blank & Jones" to "Various Artists" which of course is not right.
    However just playing around the other morning i highlighted whole of CD 1, right click/get info/ of course it showed Artist as being "Blank & Jones" but i put "Various Artists" into the Album Artist section (2nd one down) and applied and it worked, it turned that album into Various Artists in my line despite all the artist being B&J.
    I know i know it's old news to 99% of you but it was new to me so hope it will help others.
    All1

  • Cover Flow bug? Albums out of alphabetical artist order

    Can somebody tell me why certain albums are placed all the way at the end, when viewing Cover Flow on my iPhone?
    For example, Jay-Z's Black Album shows up as the very last album... instead of next to other Jay-Z albums I have.
    This doesn't happen in iTunes Cover Flow - only when using Cover Flow on my iPhone.
    There is nothing wrong with my tags or artist input, or anything - the Black Album is still listed under Jay-Z albums when you touch his name... It's just that when viewing it in Cover Flow, it's out of order. As if instead of Jay-Z, the artist was like 999 (past 3 Doors Down, 3OH!3, etc). The VERY last album.
    This has happened to other albums too.
    Anybody????

    OMG I FINALLY FIGURED IT OUT! It took me hours to figure out how to fix it and it'll take me another couple of hours to make sure the way it sorts it stays consistent, BUT I FINALLY GOT IT! It was secretly sorting it under Sort Album, which was hidden to me and so it sorted it under the origional album name and not what I'd tried to make it. I don't get what the difference is between Sort Album and asking it to sort my albums in alphabetical order, but OH WELL. This has been plauging my iPod for years and I finally figured it out! A million thanks!

  • Various artists problems not showing in Itunes music folder in Windows 7

    Hi
    I can dispay and play Albums that are by various artists in my iTunes Albums Library. Also all songs are displayed  in iTunes Songs List
    and shown as Various Artists
    But when I look in  Libraries>Music>iTunes>iTunes Media> Music
    there are no  names called ' Various Artists'
    Any ideas why this is

    You're welcome.
    Tips on fixing up your iTunes listings at Grouping tracks into albums.
    tt2

Maybe you are looking for

  • Cascading Select Lists - Not Working for me

    I am trying to implement Denes Kubicek's Ajax Cascading Select List solution. http://apex.oracle.com/pls/otn/f?p=31517:119 But it is not working for me. I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread

  • Connect a Word document instance to Generic Object Services/BDS

    Hello all, how can I manage to get a word document created via the Doc_template step to a certain Business Object (like Business Partner). I tried to trace that but I got lost in generations of codes like archivelink, sap office, knowledge provider e

  • SDK double bytes

    Hi All I'd like to ask you something. I updated a business partners data by using SDK, but Japanese characters which is double byte are broken and can't be seen on my PC. What kind of setting do I need to use double bytes characters like Japanese? Th

  • HTTP send returned with status code(100,101)

    Hi Experts, I am facing an error in ADS at se38 --> FP_PDF_TEST_00 Test Program: Version Information (for Analysis Only) SYSTEM ERROR ERROR CODE    :    100,101 ERROR MESSAGE : SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with

  • Using RMAN, how do you restore from an old backup file?

    HI, I use Oracle 9i on Solaris. I'm currently doing incremental level 0 hot backups every night using RMAN in NOCATALOG mode. The controlfile is backed up with the database. I back it up to a file (e.g. "level0_20041225.dmp"). After I back it up, it'