Some Aperture Brushes stop working??

I have recently upgraded my iMac (i5 with 12GB RAM) from 10.8.5 to 10.9.3, upgraded Aperture to 3.5.1. Pretty much my first editing session, and I discover that about half the Aperture brushes have stopped working. This happens on previously unedited images, both JPG and RAW. All referenced images.
These brushes seem to work fine:
Retouch
Skin Smoothing
Burn
Tint
Definition
Vibrancy
Halo Reduction
Highlights and Shadows
Sharpen
These brushes don't work - the brush menu comes up, I can change the setting, but the brush does not show, and I can't brush anything:
Dodge
Polarise
Intensify Contrast
Contrast
Saturation
Blur
Sharpen
Noise reduction
Curves
Enhance
Levels
I tried changing various brush settings, doesn't seem to help. I have submitted an a bug report to Apple.
Any ideas from the forum, has anyone run into this?

A reboot seems to have fixed it.

Similar Messages

  • After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Flash Player. Even though it's already installed. How can I fix that?

    After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Adobe Flash Player. Even though it's already installed the situation remains the same since the last month.
    Can I fix that just doing the upgrade for the Yosemite?

    Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
    Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
    I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
    This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
    Thanks fore responding to my question.
    DFelice

  • My spot healing brush stopped working

    My spot healing brush stopped working. After releasing the mouse, it blinks and remains black. If I do another spot, the first spot is fixed and the second one is black. And so on. This began after updating to 12.0.4 x64 (Mac 10.7.3)*

    Try resetting the brush tool.  Right click on the brush tool in upper left corner and select reset tool.

  • HT1212 After reaching 'restore and update,' it downloaded the ipad update software. BUT after some mins, 'itunes stopped working.' WHAT TO DO NEXT?

    After reaching 'restore and update,' in itunes, it downloaded the ipad update software. BUT after some mins, 'itunes stopped working.' WHAT TO DO NEXT?

    Communicate with iTunes? What does this mean? Tell us what you are seeing on your screen and what you then try to do?

  • Brushes stopped working properly (CC)

    So the brushes were working just fine, Then I closed my project and started another project and the brushes were not working anymore... Any brush I pick up it just try to redraw the background image... If there's no background the brush just draws nothing... I tired everything I could, Reseting preferences files, reseting tools and everything. What can I do?

    I'm doing everything that I used to do, And using all the tools I used to use. (History Brush Tool)
    Here's a screenshot after brushing the whole canvas several times and there's nothing on the canvas...!!

  • Need help with magic trackpad.  some touch functions stopped working.  battery full and all touch options checked appropriately.  whats the deal?

    i have tried everything but the tap functions stopped working.  any ideas?

    Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
    I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...)

  • PS CS6 spot healing brush stopped working.  followed online instructions but it did not work

    I followed online instructions for resetting preferences and tools, but the spot healing brush no longer works.  Help!

    What operating system are you using?  Did Preferences definitely reset?  Did you see this dialog box
    Do you definitely have the Spot healing brush selected? (top of the fly out list)
    What is the brush mode in the Options bar?  If anything but Normal, change it back to Normal.
    Are you able to select the tool and it does not work, or can't even select it (greyed out)?
    If you are able to select the tool, do you see the little no-go icon when trying to use it?  (Circle with diagonal bar)
    Any information that remotely useful will go a long way to helping us find an answer.

  • The Loupe in Aperture has stopped working just filled with grey whatever I settings I give it.

    Used to work fine. Am I missing something obvious here?!

    Aperture 2.1.4
    OS X Lion 10.7.5
    That what I suspected. The loupe is one of the features that does not work well with Aperture 2 in Lion and Mt. Lion, that is a known bug.
    For full compatibility with Lion and Mt. Lion you will need to update to Aperture 3. The version that is now available from the AppStore, is no longer as expensive as the earlier versions of Aperture used to be.
    Regards
    Léonie

  • Adjustment brushes stopped working

    Using LR 5.4 on MacBook Pro OS X ver 10.9.3
    was using LR last night and all my adjustment brushes worked fine. Today I try to use it and I get no overlay or response to any brush i choose on any picture. I get the adjustment pin but not adjustments are being made. I went through every brush in the list to confirm no adjustments were being made. The history shows brush strokes being added or removed but nothing is showing on the picture. I have overlay checked. I have waited approx 5 min for possible lag but nothing happens. have rebooted multiple times. I am trying to avoid doing an uninstall/reinstall because i really dont wanna have to import everything again. any suggestions would be grateful.

    Please explain how it was resolved and mark your answer as correct. This way others with a similar problem in future might benefit.

  • Trade Monster, Fidelity and some radio stations stopped working in Fire Fox (work in IE)

    These open separate windows, on does not start to load and the other will not allow a log in. Radio station never finishes loading.
    All ad on and plug in are up to date. Just started doing this the last few weeks. All work in IE8

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Aperture import stopped working?

    I have used Aperture for about a year now and love it. Never really had much of a problem with it. I recently went to add photo's from my Rebel XT's CF card and it popped up like normal. I selected the photo's from the card to import and told it was folder to add it too. Everything took a few minutes as usual then showed it was import all the photo's BUT they were not in the folder or main library. I checked my storage location (Firewire external drive) and the photo's were built and added in the librarys folders. I then reboot the iMac to double check everything. Then I tryed to import them directly from the folder it added them too originally and still they did not show up in Aperture. Anyone have any ideas? This just suddenly start.
    I am running Aperture with all updates and OS X 10.4.11 on an iMac 20 2.16 Intel with 2GB's of RAM and ATI Radeon X1600 256K Card.

    No one has any suggestions...??? HELP!

  • Some Applications Just Stopped Working

    I can't seem to get ITunes, Safari, GoogleEarth, Skype, and a few others to work, while others work fine Firefox, IPhoto, MSOffice, Garageband, Appleworks, etc. The last time I used this was with ITunes and I usually just put the computer to sleep each night. Up until now, no problems, now key applications just don't work. They bounce once in the doc and then nothing. I have tries restarting but no change. Please advise.

    Hello again:
    "Changed software" means that you added or subtracted software prior to the problems. You most assuredly have, by the by, based on your answer.
    IM not so humble opinion, the Safari 3 Beta (as miriam suggested earlier) is at the root of your problems. Why Apple released beta software to the general public is beyond me (beta=bugs).
    I hope you are able to find your copy of OS X 10.4 as I am relatively confident you have directory problems. Repairing directory problems may be done by either using the disk utility from the software install DVD or by purchasing a third party program. DiskWarrior is very good, but it costs about $90. If you find your software install DVD, I would opt for an archive and install of OS X 10.4.
    Barry

  • How do I resolve sound issues? I have gone to settings but I have not made any changes but some sounds suddenly stopped working like keyboard clicks etc.

    I haven't made changes to my sound settings but suddenly now certain sounds do not work such when I plug up to change, keyboard clicks on messages, etc

    Double-click the Home button and swipe Task Bar to the right. Check volume and mute settings.

  • CS5 Media Brushes stop working

    Windows 7 64-bit    |    Photoshop CS5    |    Wacom Intuos4 (driver up to date)
    Happily painting away, when I switch to another program, be it Skype or anything else, and then come back to PS my CS5 Media Brush no longer has pressure sensitivity, etc - just like how a bruch behaves with using only the mouse.
    The easy fix is to again switch out of PS, and then back, but you have to be careful not to have the pen on the tablet giving it input but rather wait until Photoshop is fully maximized again if minimized or the brush won't regain it's functionality. Do it right though, and it will regain tablet sensitivites.
    How do you prevent this terrible behavior?

    I'm getting this too from time to time. I'm not sure about the exact cause and if it is Photoshop or the Wacom driver causing this, but in my case it seems to be happening when using Photoshop after the system (Win 7) is put to sleep.
    Are  you using Wacom? Try to see if this will still happen if you don't use the pen but the mouse when you use the other apps. Are you using more than one pen?

  • I continue to get his error about some script that stopped working Script: chrome://asktoolbar/content/core.js:113

    Script: chrome://asktoolbar/content/core.js:113 this error contiunes to show up while using firefox and has choices of Stop the script or wait to see if it comes back. No matter which one I click it will kick me off the site or freeze up that browser

    That is a problem with the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for