Some Aperture stills not appearing in iMovie 11 Media Browser

Hello all,
I have been importing images into Aperture for a while now and just realized that iMovie (09 and 11) are not reading some of the stills I have stored in it. I have made sure that all my images are stored in an Aperture managed library and not as reference files. When I start up iMovie it takes a while and scans for new videos but I'm concerned with the stills that are not appearing. I can see the project and album titles appearing in the Media Browser but iMovie states that there are no files inside. I've also told Aperture to always share previews with iLife and iWork. Any ideas?
Thanks in advance!

Welcome to the forums.
The fact that you are able to see the Ap library and the project suggests that there maybe no previews available for that project.
At the top of the Library tab is a little cog, within here is an option for previews, also in the Ap preferences is another option for creating previews, check that these are set correctly.
Tony

Similar Messages

  • Videos in iPhoto do not appear in iMovie event browser

    After successfully importing 60 or so video clips into imovie:
    Clips appear and function normally in iPhoto.
    Clips do not appear in iMovie event browser unless they are 4 seconds in length or less.
    Previous imports from the same camera worked fine.
    It started happening after the most recent software updates.

    Deleting the prefs did for it to activate this scan:
    Upadating iPhoto video events
    Scanning for new videos in your iPhoto library
    But it still shows no videos in the iPhoto Video part of the Event Libary.  I am using iPhoto 8.0.6 under MacOS 10.7.5.
    When I choose Show Date Ranges in Events list under iMovie preferences, it shows Feb 24, 2008.  What does that mean?  What happened on Feb 24, 2008?  I have over 1000 movies in my iPhoto Library ranging from 2005 to present.
    Any other ideas?  Someone suggested removing the "&" symbol from the titles of Events, which I did.  Should i also remove the "&" symbol from the titles of the photos and movies?  What about other symbols like ":".  It seems crazy that Apple would make their software so fragile that ASCII symbols could break it.
    thanks

  • Aperture previews not showing up in media browser (and iweb)

    some of my images in aperture projects do not show up in iweb or in the media browser at all....the projects are listed and most other project show all images, but some don't....
    i tried several things including consistency check and rebuilding the entire library....nothing works....
    this is very annoying...one of the few reasons (but a major one for me) to stick with aperture over LR is the system wide integration....but it has to work....

    thanks for that info....i actually managed to fix it by rebuilding my previews.....but there was no reason at all for the previews not to show up....and it actually took 2 times to rebuild them all....some still did not show up after the first run....
    i really hope we will see an upgrade soon....some things just have to be smoothed out....and a few added....

  • Iphoto does not appear in iweb media browser

    I am just getting started w/ iWeb anad have 2 questions:
    1. I have iPhoto 6.0.6. My iPhoto library does not appear in the iWeb media browser. How do I fix this?
    2. Why can't I highlight a movie from my iPhoto library and publish it to iWeb? How do I get a movie from iPhoto to iWeb?
    thank you!

    Where are your images sourced from? Are they all coming from the same camera for example? It could be that there is actually a white border on your images.
    Try opening a few images up in an image editor and checking if there is a trim around the edge.

  • Aperture in iMovie Media Browser

    I have looked in the Aperture manual, in the iMovie help, and I did a search on this forum. So far, I can't find an answer and I hope you can help. I recently upgraded from iPhoto to Aperture 3 and everything is working fine in Aperture 3. In Aperture 3, I have the projects sorted by date, which is the way I want them. that works fine. But when I use the Media Browser to access my Aperture projects, they are sorted alphabetically, not by date. This was not a problem when I used iPhoto, so I don't understand what the issue is. Is there some way to get the iMovie media browser to use the same sort order I have specified in Aperture 3? Thanks in advance for the help.

    naperdan, thanks for your response. No, I had not seen that thread before, but it doesn't address my issue. Aperture 3 is working just fine for me, and I am not having any of the problems after importing my iPhoto libraries into Aperture 3 that the OP indicated. I can see all of my Aperture projects and albums in the Media Browser, I just can't find how to show them by date rather than by name. I could, I suppose, rename all 46 projects (e.g., change "photos0810" to "0810photos" and that would probably force the Media Browser to work the way I want it to. I just don't understand why it would show the iPhoto library in the sort order I specified in iPhoto but the Media Browser is treating the Aperture 3 library differently.

  • Some fonts do not appear in InDesign

    Some fonts do not appear in InDesign although they can be used in Word, Pagemaker and show in Adobe Typemanager.

    Can you name one?
    These are the most common causes of people complaining "My fonts don't appear":
    (a) Smart name sorting. "New Century Schoolbook" sorts under "C", not "N". "Adobe Garamond" sorts under "G". (I call this 'smart' sorting because apparently it isn't the same as, ehm, dumb sorting. However, I've never read a good description of its sort parameters.)
    (b) Word and PageMaker (but not ATM) allow the use of fake fonts: bold, italics and bold+italics are produced by horribly deforming your base font. If you want a bold font in InDesign, use the designed one. If there isn't one designed ... the designer probably had good reasons not to make one. (It's still possible to create faux-bold and faux-italics in InDesign but the program leaves that decision to you).
    (c) Smart Script sorting. InDesign groups its fonts per supported script. Latin fonts are at the top (a slightly self-centric choice), then come groups of fonts for Hebrew, Arabic, Thai, Chinese, Japanese, etc. etc. A font like Gisha contains Hebrew characters and thus appears in the Hebrew group.
    (d) More than one font file with the same font name (internally). ID gets mightily confuzed if it encounters a file "times.ttf", font name "Times Roman", in one folder, and "tr_____.pfb", font name "Times Roman", in another folder. You can't really blaim it, though.

  • InDesign Book Project...some images/graphics not appearing in print-ready PDF

    Some images/graphics not appearing in print-ready PDF. Why? and how to fix.
    The images are linked.

    That didn't work, but i copied images from other parts of my document that did work and pasted/resized to replace images that didn't import and that seemed to work.
    still wish i could figure out why it happens in the first place so i don't have to do this other process.

  • Photos do not appear in iMovie 11

    Suddenlhy photos imported into iMovie 11 do  not appear in iMovie anymore. Previously imported photos appear fine. I am using OSX Mountain Lion. Any idea what is wrong ?

    Please refer to the iLife/iMovie '11 Forum:
    https://discussions.apple.com/community/ilife/imovie
    This is the forum for iMovie for iOS or for iPad/iPod/iPhone

  • Imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one?

    help! imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one? need answers ASAP!

    That is your answer then.
    Large is 960x540
    Medium is 640x480 (or 720x480)
    Mobile is probably 480x272.
    It is offering you the sizes that make sense given the size of your source material.
    As a trick, you might try this. In your project, put a short 640x480 clip in the project as the first clip of the project. Then keep the rest of the project as is. See if it will let you share now in Medium. It will not look as good, because there are not enough pixels to cover the Medium size, but it might work.

  • TS3719 Video not appearing in iMovie video

    I have lot of video files on my iPad 4 video but they are not appearing through iMovie software.

    iMovie can see video from the photos app.
    It does not see or able to edit video from the movies app.
    So are you saying that you can see the video in the photos app, but iMovie does not see them?

  • ITunes library no longer appears in iLife media browser

    Lately, my iTunes music library has disappeared from the media browser in all my iLife apps and in iWork. I've tried deleting the plists for the iLife apps. I've tried reinstalling iLife 2006, and launching them in the order Apple suggests. I backed up my home folder, and tried reinstalling the OS. All to no avail. Everything else, photos and movies, etc, appear in the media browser.
    I can't seem to find any information on Google or Apple that's on point with my problem. So, I am writing this post.
    I am not sure when the problem started, but I think I noticed it in mid June (June 18 was when reinstalled the OS).
    Anyway, I'd appreciate any suggestions. Using the iLife media browser is easier than manually dragging files from iTunes to GarageBand for podcasts.
    Thanks
    iMac G5   Mac OS X (10.4.10)   1 GB RAM

    Wow, this is not encouraging. I have a slightly different version of this problem. I had my Aperture library showing up (and updating as I expanded it) in the Media Browser, and all was well until I bought a new Mac and transferred everything over from the old one. For whatever reason, not everything makes it over. Now, on the new Mac, my Media Browser only shows images from Photo Booth--not even iPhoto! I feel your pain and share your ire.
    Someone mentioned September (not coming soon enough). Is there speculation that Aperture will be updated (finally!) when Snow Leopard releases?

  • Aperture library not showing up in upload browser

    When I go to upload Aperture photos to the web, my Aperture library is not listed in the media browser. Only iPhoto and Photo Booth is there. I've had to go into Aperture and export the photos to upload them. This started to happen after I upgraded to Lion. Any suggestions?

    Aperture did not show up in any other apps, but I found an discussion started by someone with the same issue, and the issue was resolved by creating a new library, then swicthing back to your original library. I tried this and it worked for me also. Here is the discussion: https://discussions.apple.com/thread/2338518?start=0&tstart=0
    Thanks for your help

  • My pics and videos do not appear in the video browser?

    my pics and videos do not appear in the video browser? How do I get it back. I may have denied IMovie access to my pics and videos when opening the app for the first time.

    I have the same issue (iPad 3, iOS 6).  I have tried to:
    -erase all projects on the iMovie
    -reset the iPad
    -uninstall iMovie and reinstall it
    None of these three things worked and I am at lost in terms of what else can be done.
    All that happens when I start a new project is that under "videos" there is a big black box (empty videos).  Same thing for pictures.  When I press the camera button to insert a video from the camera, this works no problem.  However, I used to be able to insert videos/pictures from my Camera Roll.

  • How to make the zoom in/out scale appear in the media browser ?

    How to make the zoom in/out scale appear in the media browser ? My videos only appear as a file list (only the names) and the zoom in/out device is currently not in the media browser...

    I meant that there is no "Icon mode" button or "List mode" button in my media browser. How to make them appear ?

  • Some applets is not displayed in the ie6 browser

    Dear all
    Pls hlp me in this issue
    Some applets is not displayed in the ie6 browser
    it is displayed after enabling the Java sun "Use Java 2v1.4.0 for applet "
    but some applets is displayed without enabling Java Sun
    Insted of JavaSun we use MicroSoft Vm
    how is this possible

    Hi,
    As Julien said you can install the SQL Studio and check for the table starting with M followed by a number with your rootnode name. Similarly for the child node also. If you see that the data is present please check if you have written a BIND method for your table, form in the either the INIT or the supply function.
    Regards,
    Narayani

Maybe you are looking for

  • Best practice for timing of Transfer of forecast to R/3 Demand Management

    Hi All, I have APO DP 4.0 with monthly bucket. What is best practice to transfer the planning results to R/3. Meaning how many times we should transfer it? And when forecast (PIR) is transfered it replaces the old PIR in demand management for that mo

  • Ereader files not loading on Z22

    Now using my second Z22. When I started it up I loaded one book into ereader. After about 3 months I tried loading more books but they don't show up in the ereader file list. The Hotsync process shows them being synchronized and they come off the Qui

  • Accessing AD File Shares

    I just bought a mac for my home use. I use the Cisco VPN client to connect to my corporate network. It is a 2003 AD domain. I would like to connect to our file shares but have been unsuccessful. In finder, when I click on Network, it shows nothing. I

  • Live video mixing, editing, and recording with multiple feeds in

    I'm REALLY new to this - does premiere (or any other Adobe product) enable you to record live video and mix it onscreen from more than 3 live video sources - LIVE (at the time of the event)?

  • Dynamically defined GeoRaster theme using WMS parameter values

    Hi everyone, In addition to dynamically defining a GeoRaster theme using SQL (which is documented by Oracle), is it possible to somehow access the WMS values of parameters in the WMS query which is accessing the theme? For example, can I grab the BBO