Some asset classes do not show up for a user in S_ALR_87011990

Hi
When the asset history sheet is run in S_ALR_87011990, a user is unable to display some asset classes in the report. This was referred to security team. They say that everything looks fine and nothing appears wrong for that user--roles and profiles ok etc.,. No worklists are being used and no variants are being used. No dynamic selections either.
Can someone let me know why the user is unable to display some asset classes. Asset classes that the user is unable to display were created last year. Most users are able to display these asset classes in the report except this user.
Please help and provide some exact solution.
Best wishes
Rajmohan..

Hi Rajmohan,
most probably it is a authorization problem.
Please compare the assets which are not shown with this user. It could be a cost center.
regards Bernhard

Similar Messages

Asset class does not show any results on the asset history sheet

I have an asset that was acquired on 31.03.10. When I run the asset history sheet for all asset classes, it shows up(under the acquisition column). However, when I run the Asset History Sheet for only that one asset class, there are no results.
Am I missing some config or is this a bug?
Fixed Assets addon. SBO 2007A SP0, PL48.
Financials >Fixed Assets > Asset History Sheet.
Enter Asset class and Date: March 2010.Click OK.
The report is empty.

The problem was the asset class name. The character ' is not allowed and was not recognized by the asset history sheet report.

Eu_role not showing up for all users in EP7

Hi SDN,
I have newly deployed EP7, I want all users to have EU_Role but but its not showing up even though i have added eu_role to everyone group.
i do see eveyone group attched to all users but it does not show up eu_role to it.
Am i missing anything in EP7 Configuration.
Thanks
DK

Hi,
Go to everyone group and click the tab 'assign role'
Search for the eu_role recursively(check the box recursive before search). otherwise all roles will not show up.
Hope that helps you
Raghu

Request Offerings not showing up for custom User role in SMPortal

Hello All,
I've created a custom End User role and scoped it to the domain users group.
To this role I want to show a specific set of Request Offerings on the portal
For that Purpose I created a new Service Offering and added these Request Offerings to it.
I then went on to create a Catalog Group and added the Service Offering to it.
I then created the custom user role based on the EndUser role and allowed them to see all Forms, all Queues, All CI's and on the Catalog group I select that they could only see the Catalog Group which I just created.
I then logged in into the SMPortal and was expecting that my Service Offering would be shown to them.
However, they don't see the service offering.
What could cause this?
Is there something I'm missing?
Thanks in advance!
Filip

You have to add the Service Offerings and the Request Offerings in the Catalog Group. Nesting doesn't work because Service Offerings and Request Offerings are different types of objects.
This offers the option the manage the access to Service Offerings and Request Offerings very granular if needed. For instance you can control access to a Service Offering in one Catalog Group related to one user role (A) and use two additional Catalog Groups
with different Request Offerings related to other user roles (B) and (C). Result will lead to:
User in Role A and B -> Can see Service Offerings A containing Request Offerings B
User in Role A and C -> Can see Service Offerings A containing Request Offerings C
User in Role A, B and C -> Can see Service Offerings A containing Request Offerings B and C
User in Role A only -> Don's see anything because of the missing permission on any Request Offering. So the "empty" Service Request won't show up in the portal.
Hope his helps.
Andreas Baumgarten | H&D International Group

Windows Services service not showing up for domain users

When I log in with a domain account I do not see the Windows Remote Management (WS-Management)
service, when I login as the local administrator the service is there. Anyone know what might be causing this and how I can fix it?

Hi,
Have you tried to reconfigure it with the domain account?
Installation and Configuration for Windows Remote Management
http://msdn.microsoft.com/en-us/library/aa384372(v=vs.85).aspx
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Old AP Invoices not showing up for a user

Hello,
Working on EBS:11.5.0 windows, the problem is that a specfic user can not see the old invoices while other users are able to see the old invoices. The problem has occurred yesterday, everything was working fine before that.
Any help on this regard will be highly appreciated.
Thank you,
Adith

1) Are both users who can / can not see the invoice using the same responsibility ?
2) Any recent changes / patches moved aorund the time from which this problem is visible ?

[svn:fx-trunk] 13128: Fix for ASDoc tooltips does not show ASDoc for some functions

Revision: 13128
Revision: 13128
Author:   [email protected]
Date:     2009-12-21 13:46:32 -0800 (Mon, 21 Dec 2009)
Log Message:
Fix for ASDoc tooltips does not show ASDoc for some functions
QE notes: None.
Doc notes: None
Bugs: SDK-24751
Reviewed By:Paul
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24751
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelGenerator.java

Welcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
    width: 220px;
    left: 180px;

Plz. help,table does not show value for one field

hi all,
i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
plz. help ASAP.
the code is as under
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<BODY bgcolor = "yellow">
<%@ page import = "java.sql.*" %>
     <%! // declaring variables
String s = "";
java.sql.ResultSet rs=null,rs1=null,rs2=null;
java.sql.Connection con;
java.sql.Statement stmt,stmt1;
String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
%>
Following are the pending complaints ..
     <TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
     <TR>
     <TD> ComplainD </TD>
<TD> ComplainId </TD>
<TD> ProbHeader </TD>

</TR>
     <%
     try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
     //java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
          java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
          s = "select * from Complains";
     java.sql.ResultSet rs = stmt.executeQuery(s);
                    while(rs.next())
                    //getting data from database
                                                       empId = rs.getString("EmpId");                    // out.print(" " + empId);
          compid = rs.getString("ComplainId");
          // out.print(" " + compid);
          calltype = rs.getString("CallType");
          // out.print(" " + calltype);
                    a = rs.getString("Complaindate"); //problem with this field
out.print(a); // prints value
          %>
                    <TR>
                    <TD> <%=compid %> </TD>
                    <TD> <%=calltype %> </TD>
                    <TD <%=a %> </TD>
                                   </TR>
<%
                    }//while loop
     %>
     </TABLE>
     <%
     }//try
          catch(Exception ep)
          out.println(ep);
          System.exit(1);
%>
</BODY>
</HTML>
value in database is as follows :-
Complaindate
5/18/2003 1:30:27 PM
5/18/2003 7:32:43 PM
5/18/2003 7:34:02 PM
5/18/2003 7:49:19 PM
5/18/2003 7:50:27 PM
5/18/2003 10:49:42 PM
5/18/2003 10:58:24 PM
thanking u ,plz ask if any further clarifications

Hi
I am seeing nothing wrong with ur code..
what about "view source" result.....plz check with that...
whether u r getting all the trs and tds...
revert back on this Issue..
Mars Amutha

Asset class Land separate & building separate ( for 1 asset)

Warm Greetings to All Group Members
Require Best practice solution
Current Scenario Our company Purchased the building in 2009 and In SAP system Building was created, posted to asset class Building with the depreciation for 40 Years
Our Audit department is requesting our Finance department to show two assets separate as
1) land with useful life 40 Years with value
2) Building with useful life Zero with value
Note
current The posted asset in sap Has value ( Building + land)
2.Our company is state transport company
Please suggest me/as what is the best practice
Should i create a new asset class separate as land and move the value of building to land
Your Early Reply will be appreciated
regards
shamul heq

Hi Shamul heq
If you want to manage land and building separately, you need to create new asset class for land beside asset class for building. Then create new land asset master data under land asset class and transfer value of the land from original building asset to newly created land asset.
Alternatively, case of no necessary to manage land seperately, you can simply transfer the value of land to sub-number asset of the building asset. In this way, you can manage the building and the land as one asset in SAP system.
Regards
George

Videos in some iPhotos Albums do not show up on Apple TV.

Videos in some iPhotos Albums do not show up on Apple TV. Videos in other folders are there. For instance, one album has 43 videos and 1600 photos. Apple TV only shows the 1600 photos. Is there an issue with albums that have both photos and videos?

You can only view that rental on the iPad. For it to show up it has to be rented directly on ATV or through a computer and streamed via home sharing

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

Error *Chart of dep-dependent assignment to asset class 100306 not possible

Dear All
I got error Chart of dep - dependent assignment to asset class 100306 not possible
Diagnosis
    You tried to assign chart-of-depreciation-dependent data to asset class
    100306.
System Response
    The assignment is not allowed.
Procedure
    In order to be able to assign chart-of-depreciation-dependent data to
    asset class 100306, the following conditions have to be met. You have to
    have already
    1. Defined at least two active charts of depreciation
    2. Assigned asset class 100306 to more than one chart of depreciation
    However, at the moment this asset class is only assigned to chart of
    depreciation 1.
I already checked following this but I didn't found the mistake (already assign COD to company code).
Please anyone help me to solved this.
Thanks in advance.
Best Regards,
Utarat.P

Hi Utarat,
whenever you create an asset the system checks first the table ANKP. If you have chart-of-depreciation-dependend account determination, than an entry in the table ANKP is made. If you than make a copy from such a asset class in the asset class there is another account determination than in the table ANKP and the system takes the account determination from the table ANKP and not from the asset class.
Normally you can't define chart-of-depreciation-dependent assignments (with transaction ANK1) if there is only one chart of depreciation. As a result you'll get error AC012. So, I think there was a second chart which was deleted.
If you'd like to change (or delete) this assignments you can use
the following workaround:
    SM34 -> View ANKA_ALL -> Maintain
       - select asset class ART (for example)
       - then click in the left column on "Chart of dep - dep data"
Regards Bernhard

Why are TV show episides for last three days not showing up for purchase on iTunes?

TV episodes for 10/25 and 10/26 are still not showing up for purchase in iTunes. Am I the only one? The latest episodes that show up are from last Thursday. What gives?

I am also having the same exact problem. Put in a ticket with Apple 2 days ago when I first noticed the problem. No one has contacted me reagarding this, and you can't get anyone on the phone!!! So frustrating!!! I went back and put in a dispute for all episodes that charged me and I was never allowed to watch, some season passes others were single episodes. All in all Apple owes me about $150 as of now. We are an Apple family, love their products, but this is ridiculous!!! Glad I'm not the only frstrated party, hoping there is some resolve. Really would like to get what I paid for!!!!!

HT1414 How do I restore from an earlier icloud backup that is not showing up for my ipad?

How do I restore from an earlier icloud backup that is not showing up for my ipad?

You can't. Usually you have only the most recent backup to choose from (I do). Some users has said they get 3 to choose from (this is the max as stated in Apple literature). You can't go back further than that.
The usual advice is that all photos should be synced to a computer (too many users have lost some/all their photos doing a restore - don't trust them solely to icloud). If you've been doing that, you can find them on your computer.

AS01 Error message "Asset Class is not Entered"

When using the Transaction code AS01, we get an error message stating "Asset class is not Entered" and is not allowing us to use the T.Code but just gives us an option to Exit from the screen.
Because of this behaviour it is not allowing to enter any data in AS01 but only allows us to exit from the screen.
This is happening in ECC 6.0 EHP3 system.
Has anyone come across this kind of behaviour ?
Thanks in advance !
Regards,
Murali Narayanan

Hi Murali
Try transaction code OAAY and check if your class is assigned to depreciation area.
This is the last step before making asset class available for use.
Of course, all other settings have to be maintained properly.
OR
Check the Account determination, Screen Layout, No Ranges and Asset Class Determinations once again. And also check the Chart of Dep assignment to Co.Code.
OR
Please check OAYZ for all depreciation areas to be active.
Rgds
Zub

Some asset classes do not show up for a user in S_ALR_87011990

Similar Messages

Maybe you are looking for