Some audio files no longer playing?

I am half way through an imovie project and recently added audio commentry, however some files no longer play also a few now have a yellow warning triangle?
Im assuming the files are now corrupt or something?
really annoying!, anyone have an idea what the problem is??
Cheers

Hi
I'm assuming the files are now corrupt or something?
I don't
Yellow triangle - indicates that the pointer in iMovie to the Audio file used, no longer is valid.
iMovie - DO NOT Copy the audio You put into Your movie project's at all - only points to where You found it.
E.g. - You insert an Audio-CD and use a tune from this in Your movie - then you need a tune from another CD and Ejects the first one =====>  RESULTING IN A YELLOW Triangle - pointer to the tune on Your Audio-CD is broken up on You ejected the CD.
I copy all needed Audio to a dedicated folder first (as I store in a proper place e.g. movie folder in User account) - then I use them into my movie.
The deeper thing is - That there is NO movie in Your Movie Project at all - only a small text document pointing to the material used (video, photos, texts and audio) AND how You want it to be presented AS a Movie.
Only when Shared / Finalized - there is an actual movie created.
This is Non-Destructive non linear Video Editing and how it works.
Yours Bengt W

Similar Messages

  • Video and audio files no longer play thru safari, QT, RP...but itunes OK?

    What might have caused this? Last I did was to install some sw to hear/see wiki posts....

    psychjed-
    Greetings and welcome to the Apple boards.
    Take a look at this document.
    Luck-
    -DaddyPaycheck

  • Some mp3 files do not play after upgrading to iTunes 8.0

    some mp3 files do not play after upgrading to iTunes 8.0
    have upgraded and some songs which used to play on iTunes 7 no longer play. album art is missing. when trying to play on of these songs, nothing appears in the playbar at the top of the window.
    it seems the same problem exists in the mac os environment.

    The solution I discovered to fix this problem was to create a smart playlist with all song of a kind containing MPEG. Then I went through album by album, and coverted ID3 tags using the value of NONE. This then enabled me to play the songs in iTunes 8.0 and in many cases restored the Album Art.
    Thanks!

  • My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does  I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark Ii

    My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does  I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark II  Camera. 
    The program used to import and transcode the Can 5D footage but no longer does.   The program freezes often and looses my projects as well.  Hard to make a living when your editing program is on strike!

    My audio files no longer sync to the in the 5d in camera audio. It did when I bought the program but no longer does  I reinstalled and it still will not sync the files recorded on the H4N with the Canon 5D Mark II  Camera. 
    The program used to import and transcode the Can 5D footage but no longer does.   The program freezes often and looses my projects as well.  Hard to make a living when your editing program is on strike!

  • I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone?  Thanks!

    I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone?  Thanks!

    iTunes will only import music from your phone that was purchased from the iTunes store.  To transfer music from other sources you have to use 3rd party software, such as PhoneView.

  • Question marks with some audio files

    Hello all,
    I've been trying to understand the problem I'm having with some audio files of my website, but to no avail. Some audio file are not loaded up with Quicktime, and only show a question mark with a blue "Q" around it.
    In other words, would any of you be able to help me find out why the audio files in the following pages do not work:
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2007/4/7_Liszt_Sonata_in_B_minor%2C_S.2.html
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2006/6/23_Mozart_Piano_Concerto_in_C_minor%2C_K._491_i._All egro2.html
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2006/6/23_Mozart_Piano_Concerto_in_C_minor%2C_K._491_iii._A llegretto2.html
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2006/5/8_Bachs_Sarabande_from_Partita_no.2.html
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2004/8/6_Beethovens_Piano_Concerto_no._2_in_B-flat_major%2C _op._19_-_i._Allegro_conbrio.html
    Although it does in these other pages:
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2007/10/29_Chopin_Etude_in_C_major%2C_op._10_no.1.html
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2007/9/18_Schubert_Piano_Sonata_in_E%2C_D_157_i._Allegro_ma _nontroppo.html
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2007/9/16_Schubert_Piano_Sonata_in_E%2C_D_157_ii.Andante.html
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2007/4/29_Beethoven_Piano_Sonata_in_C-sharp_minor_op._27_no ._2_-_i._Adagio_sostenuto2.html
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2004/6/8_Bach-Busoni_Chaconne_from_Partita_no._2%2C_BWV1004.html
    http://sharon.barnea.free.fr/SharonBARNEA/Music/Entries/2004/6/8_Bach-Feinberg_Largo_from_Trio_Sonata_in_C_major%2C _BWV529.html
    I really appreciate your help.

    You are giving viewers the full title on your web page.
    You could cut your files names like < Beethovens_Piano_Concerto_no._2_in_B-flat_major%2C_op._19_-_i._Allegro_conbrio.html >
    to something like BthvnPC2BfM.
    Publish to a folder and look in the "Media" folder to see that all your files are there.
    A better way to provide a download is to ZIP the music file and link to it via "Link to: A file" in the Link Inspector.
    Type "Download" over the file name that appears and select your rollover colors and U or not in the format page.

  • IMovie Audio Files Won't Play when the File is Moved

    I imported a lot of audio files into iMovie from my desktop and I set them out how I wanted them in my project. But as my desktop was getting too cluttered, I had to move the audio files into a different folder in my documents, but now the audio files won't play and a warning icon is on each audio clip. Is there a simple way to relocate the files, without moving the files back to my desktop and without having to set out my all my audio files all over again?

    Besides the two files you mentioned in your post, you also need to upload YOUR .swf as well. Then you need to upload your music file/folder.
    Also double check that the path to your mp3 is correct RELATIVE to the location of the Web page that you placed the .swf on, NOT the physical location of the .swf.
    var req:URLRequest = new URLRequest("../Sound/dreamsSound1.mp3");
    This needs to be the path from the WEB PAGE to the mp3, NOT the path from the physical location of the .swf.
    Once you have the pathing correct, it should NOT work when testing in Flash CS4, because the path to the mp3 needs to be RELATIVE to the Web page.
    Best wishes and Good Luck!
    Adninjastrator

  • Why don't some audio files play back in enhanced iBook?

    I recently bought an enhanced iBook in iTunes for my iPad and most of the audio files play.  A few do not when I click on them. The player goes blank (disappears) and nothing happens. Does anyone have a solution?

    In iTunes, select all the songs/files you want to stay where they are.
    Right click - get info.
    Tick *Remember position* and set it Yes.
    You can do individual songs or a bunch at once.

  • MOV files no longer play on my iPad after the IOS7 upgrades

    Prior to the recent IOS upgrade to 7, then 7.0.2, I was able to use my camera connection kit to import videos taken on my camera. They played without issue and I was able to share with friends from my iPad.
    Since the upgrades, the files will import then when launched, show an error 'Cannot open' and then play with no audio. The videos will often then play at a faster speed than recorded. They files are useless without the audio. Suffice to say that they play on a PC without issue.
    I desperately need to get this resolved as to why this has occurred. The only thing that has changed is the OS. Video files imported before the upgrade no longer play as before either.
    Please help me if you can.

    No unfortunately not. I don't know how to escalate this to Apple tech but I think that is the next step as I believe it is IOS based problem, not user related.

  • Audio file doesn't play on the server

    hi,
    i have embedded an audio file on a page. it plays perfectly fine in whatever browser i use to preview it, but when i put the page on my server the play controls do not appear, only the quicktime logo appears. url:http://www.doctorastronomy.net/amateurastro/SunTube3.html
    thanks,
    dave

    Solution: Embed a Flash MP3 Media Player on your page.  You'll reach the widest audience with Flash because Flash media plug-in comes factory installed on almost all new computers.  QuickTime doesn't.
    Get a Wimpy Button or Wimpy MP3 Player
    http://www.wimpyplayer.com/
    Free Flash MP3 Audio Players
    http://www.premiumbeat.com/flash_resources/free_flash_music_player/mini_flash_mp3_player.p hp
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb

  • Internet Audio will no longer Play Through USB Output to hi-fi Amplifier & Speakers

    My audio output jack on my Mac G4 is broken. I have been taking audio out of the computer by USB into a device that converts the audio so it can be used with a traditional amplifier and speakers. This presently, still works fine for audio or audio/video sources that are stored on my hard drive.  Yesterday, I was looking at a youtube video embedded on a non-youtube site. Both audio and video were working fine.Then the audio stopped working. I went to the youtube site and no audio worked there either. I have tried myspace and other sources with audio/video, but no longer will audio from the internet, play on the USB system.  Any player on the hard drive will produce audio through the USB port to the amplifier system. If I switch the Mac OS X.4.11 system preferences to select the internal speakers for the output destination, I can get audio from the internet again. Then everything from the internet or the computer plays through the internal speakers. I have Safari and Firefox Browsers. I need to be able to play music from the internet through the USB port to my amplifier and speakers. One suggestion I researched was to trash the Macromedia preferences and then restart the browser. I tried that to no avail. Hopefully, somebody out there knows what happened and can tell me how to fix it.

    Hi BD,
    Thanks for saving me. And thanks for responding so quickly. Your answer was there when I got up. For me 48 hours was a long time to go without that function.
    I had seen one reference to the audio midi setup app and had looked at it but somehow only saw the midi devices dialog box which I had dealt with in the past. After your post I went back to it and I immediately discovered that there is also an audio devices dialog box.
    From the drop-down menu I selected 44100.0 hz int the format field on the output (right) side of the dialog box.
    Also the Default Ouput and the System Output fields had built-in audio selected instead of iMic USB audio system. I used the drop-down menus to switch them back.
    So watching the youtube video imbedded on a non-youtube site must have changed those settings.
    Any idea why that would have happened?
    Now, I'm wondering if the little iMic USB audio system which converts the digital signal to analog line level out is actually a little midi device? Well, maybe not since there is no midi plug involved. I have seen that setting (44.0 Khz) relating to CDs I think. I'm guessing that 44.0 Khz and 44100.0 hz are very close to being exactly the same thing.
    So does 44.0 Khz = line level (analog audio)?
    Anyway, BD, Thanks again for solving my problem and doing it so quickly. What a relief!
    Have a great 4th of July holiday weekend,
    Skip

  • Add audio files and control play in pdf

    Hi, newbie here.  I have a set of large text documents in Word and corresponding mp3 audio files.  I am trying to create pdf's with the audio files embedded at specific points in the text.  I can put audio in and play it, but there is no controls for the audio.  I have seen a pdf file with a play-pause-stopbar that works, but cannot figure out how to do it.  Any and all help is greatly appreciated. Using Acrobat Pro7 (can upgrade if needed).  Thanks
    Just another thought, is there a small flash player that can be mbedded into a pdf?

    Thanks. I have upgraded and used the new conversion to Flash for the mp3 and
    it works well.  The look of the player isn't the greatest but it suits my
    needs.  Thanks again.

  • "AU audio file player" stops playing after a few seconds

    Hi there,
    i use "AU audio file player" in my concert set up.
    It worked fine til yet, but now it just stops playing after a few seconds.
    The track is 3 minutes, but it stops suddenly.
    I tried to reload the tracks and tried loading the "AU audio fle player" into a new session,
    but it still stops playing in any of the sets.
    Any idea?
    Thank you very much, S

    Hi Susanna,
    I did not find a way to trigger it from the keyboard...
    So I decided the following: I made a short cut for QuicKeys which opens the AUAudioFilePlayer and starts the loop I need. A quick solution which works with just hitting one key on the computer and the loop player starts. This works pretty well with QuicKeys but not with MS, the problem: sometimes when I choose by double clicking the AUAudioFilePlayer a black window shows up and only the name is readable, nothing else. I have to close it, reopen it and then- perhaps- the AU shows up and I can push the play button. Do you now that problem?
    R.

  • SWF File No Longer Playing

    SWF walk-on video actor no longer playing on www.bestjumborate.com front page. Worked up until recently in Chrome and IE. Still plays in Android. No changes to site or code done. Any thoughts or advice?

    > Jeckyl--" you DO NOT HAVE A STANDALONE FLASH PLAYER".
    > I have understood that clearly.
    > It would be most appreciated if you would give me the
    URL of the site to
    > obtain the STANDALONE FLASH PLAYER.
    ARRGGH !! I've done that so many times already .. you only
    get the released
    standalone player from installing Flash itself. That's the
    only legal way
    to get it as it is not legally redistributable.
    > As you can see, I have tried to find it without success.
    Yes .. because it cannot be legally redistributed. As I've
    said also
    several times.
    > P.S. This site
    >
    http://www.adobe.com/support/flash/downloads.html
    > (see middle top right box) offers a link to "All
    available Flash Player
    > downloads" But if I click the link, I see no standalone
    Flash Player.
    > This site offers only what seem to be older versions
    ARRGGH !! Of course not .. because the standalone flash
    player only comes
    with flash and is not available separately and is not legally
    redistributable. You'll only see released flash player
    controls for
    download (or maybe some very old stand-alone players that
    Adboe has decided
    can be made available) .. it is NOT the current released
    standalone flash
    player. You really don't seem to be listening to what I've
    said..
    NOTE: As I'd also said before, it IS possible to get the beta
    of the
    standalone player for the next Flash Player 9 as a download
    from Adobe Labs
    .. but it is unlikely to be updatable to the full version, so
    you'd always
    only have beta version unless you download Flash 9 when its
    out. seeing
    you've not managed to find you way to abode labs (its off the
    main menu on
    the adobe main web page) here is that particular page for the
    Flash Player 9
    standalone player pre-release ...
    http://labs.adobe.com/downloads/flashplayer9.html
    Jeckyl

  • Help!- MP3 and WMA files no longer playing on my Micro Pl

    I have a 52mb micro plus that I got in September 2005. All of a sudden, I can longer play my mp3 and wma files... just the radio. I have updated my creative zen file organizer, I have a full powered battery inside, I have done no significant damage to the player (I dropped the player once on the sidewalk but not from a big distance or very hard), and I really can't think of anything else that is causing the problem. Can someone please help me fix my player so I can start playing my music files again? Thank you.Message Edited by jjc92787 on 05--200707:0 AM

    No unfortunately not. I don't know how to escalate this to Apple tech but I think that is the next step as I believe it is IOS based problem, not user related.

Maybe you are looking for

  • I need help! my ipod is screwed because i tried to fix it myself

    Huh, here is the whole story. I have a fairly new dell computer thats on Windows XP Pro OS. Im not technologically ******** and i go to high school. Around sometime in july i bought my very first ipod (5G U2 Special Ed.). I set it to the auto upgrade

  • Sunblade 1000 will boot from CD-ROM or DVD-ROM

    I have Sunblade 1000 with a pre-installed Solaris 8 OS. I originally purchased the workstation without a CD-ROM. I bought an old Sun 411 CD-ROM. After installing the 411 CD-ROM, I entered "boot cdrom". Somehow it will not boot from the CD-ROM drive.

  • 10.0.6 Projects/Events on External Drive Issue

    Ever since the update of 10.0.6, I seem to be having an issue with the projects that are stored on my external media. They are no longer shown in the project manager (infact one of the storage devices flashes up with the project but then it dissapear

  • Iteration problem in ref cursor

    hi all declare type ref_cur is ref cursor; p_ref_cur ref_cur; type namelist is table of varchar2(10); type address is table of varchar2(20); p_namelist namelist; p_address address; begin open p_ref_cur for 'select emp_code,EMP_ADDR from emp_det_bak';

  • Using variables in Caption section of Legend Answers view

    Is it possible to use variables as Captions in the Legend Answers view? If so, what's the format? Thank you