Some Audio is nothing being burned onto dvd.

please excuse the newbie question BUT....
i have audio on A1 and A2. They are not coming through when i play my dvd on a player hooked up to my television but it does sound when i play it on my G5's DVD PLAYER.
I also have audio on A5 through A10. That audio sounds on both.
does the a1 and A1 attachment on the left have anything to do with this? i have a screen shot i can send via if that will help. i realize my description may be cryptic.

I know you've said you've solved this, but it sounds as if you are using different audio tracks for different audio channels? they are there to allow you to use alternate audio, not split stereo left and right.
All of your audio channels (left and right) go into one of the Audio tracks.

Similar Messages

  • Poor quality (vibration) on video clips when it burns onto DVD

    We created 15 mins video on Final Cut Express, saved on Quick Time, and burned onto DVD. Although the video on Quick Time was fine, some of the quality of the video clips on DVD we burned was so poor....It had so much vibration on some of the video clips. We tried on both Best Performance & Best Quality, but they both had poor quality. Do you have any suggestions? Do you think upgrading to I Life 08 will help? Please Help!!!! Thanks!

    It had so much vibration on some of the video clips.
    Video on a DVD is mpg-2 compressed (which looks at frame to frame differences in compression) and is interlaced.
    If you have content with lots of movement - like many hand-held shots - mpg-2 compression and interlacing will act to create lots of 'jumping' or 'vibration'. The only solution is to use a tripod and avoid shaky, hand-held shots.
    BTW, for a short clip, 'Best Performance' will give you the best quality you can get.
    F Shippey

  • Burning onto DVD+RW or -RW

    Hi Everyone, this has probably been addressed already but I'm having trouble finding the answer I need.
    I don't seem to be able to burn onto dvd+rw or -rw's and mac help says that OSX 10.3.9 won't do it, should I upgrade to Tiger or is Toast 7 the only options?
    Cheers for any help you can give!
    Phil
    iMac G5 17" 1.8Ghz ,160GB hard drive,airport,superdrive,768MB ram   Mac OS X (10.3.9)  

    Phil:
    Toast 6 or 7 Titanium will definitely burn the DVDs to which you refer, assuming, of course, that you have a DVD burner that will.
    Good luck.
    cornelius
    Pismo400, 100 GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS 10.4.3   Mac OS X (10.3.9)   Beige G3 OS 8.6

  • Can my project be burned onto dvd at all?

    Hi. I just finished editing a 20 minute video in Adobe Premiere CS5 and would now like to burn this onto dvd using dynamic link. I have tried already but its taking forever to build.
    I simply sent my timeline to encore from premiere. Is that what I should be doing?
    My project settings for video are: 1920x1080, 25fps, upper, quality 50, and for Audio are: 4800Hz, stereo, 16bit.
    My hardware is a pioneer dvd-rw DVRTD11RS. Is this going to be able to burn this disc at all or do I need something else?
    Estimated time to encode my project in Media Encoder is 5hrs 33minutes. Is this normal? I know its a very high resolution I am working with, but I would like to maintain the quality. Its important that I do actually.

    You may NOT maintain HD quality to go to a DVD... the DVD specification is for SD (Standard Definition) so part of the reason the process is taking so long is that your video is being transcoded from HD down to SD... usually being called down-rezzing (down resolution)
    If you want to maintain HD quality, you need a BluRay burner and a BluRay player at your TV
    There is a way you may put a SHORT HD video on a DVD, but you would still need a BluRay player at your TV to view the video
    BluRay then to DVD http://forums.adobe.com/thread/885601
    BluRay image on a DVD http://forums.adobe.com/thread/871854
    AVCHD direct to BluRay http://forums.adobe.com/message/2785066
    AND a possible workaround http://forums.adobe.com/thread/706465

  • Audio Skips After Being Burned?

    I have recently burned 2 DVD's using Encore CS5.1. In both, I have multiple timelines, all with individual videos. After checking each DVD, I have come across a recurring issue. After burning the DVD's, one timeline (video) on each DVD has audio issues. The audio files skips, but the video plays normally. Why is this, and how do I fix it?
    I am using AVI videos, and having Encore transcode them.

    Stan,
    The audio came from many sources, including DSLR clips, wav files, camcorder 5.1 clips, etc.  My first attempt to transcode and burn in blu-ray was successful, but I had not yet added my Encore menus, my After Effects stuff, my additional Premiere Pro timelines (as extras on the disc).  By successful, I mean that the video and audio worked as they were supposed to.
    Then I added all my menus and buttons, my timelines, my encore chapter markers (in Premiere Pro), and I linked the buttons to the chapter markers in Encore.  When I burned the disc, I discovered that, although the navigation worked perfectly, there was that strange audio hiccup in my original (non-extras) sequence's timeline.  By the way, the additional (extras) timelines play perfectly with both video and audio.
    I am now resorting to exporting the original sequence as an H.264 Blu-ray media file from Premiere Pro, and will attempt to import it into Encore to replace the offending timeline.  I guess that means that I will have to relink all my buttons to new chapter markers in the new timeline.  I'm not sure what else I can do.
    Thanks for the help.  I hope I answered your question.
    Mike Lynch

  • Audio dropped out when burned on DVD - PRE.

    I have finished my movie on PRE 8 and burned it on a DVD in high quality. The problem is the background music works, but the audio from the videos is dropped out. When I play it on PRE 8, the audio works perfectly. The video and audio comes from a JVC Everio HDD. Everything works fine until I burn it.
    I did not use Instant Movie or Audio Mixer because I did it manually.
    Is there anything I need to do before I burn the DVD, or do I need special settings?
    Another problem I have is that Organizer turns off and does not work.

    Patrick,
    You gave me an idea for two tests. They are simple and fairly quick and will not require any real editing in PrE, or another NLE.
    Test 1:
    From Export/Share, Export your movie. I think you are doing SD/DVD work, so choose DV-AVI. Export just the Video (checkbox for Video and Audio, and you want Video only). This will give you a silent Video-only file. Now, Export>Audio (choose PCM/WAV 48KHz 16-bit) to get an Audio-only file. Test this Audio-only file. Did you get both the AV's Audio and your Soundtrack? You should. Then, create a new Project to the right specs., and Import those two files. Note, your exact placement of the Audio-only file might not be on Audio Track 1, and just let it go to Audio Track 2. I'd not use Narration, or Soundtrack. Test. Burn to a DVD RW disc, so you do not create a coaster, and test again.
    Test 2:
    Do a Save_As, name and locate it. Delete your music from the Soundtrack. Export/Share the movie with both Audio & Video. Test. If things are working now, without the Soundtrack, I'd bring in your music, but try placing it on Audio Track 2. Test. Note: an alternative to this would be to do two Save_As Projects. In one, remove the AV's Audio completely, and then Share/Export just your Soundtrack as an Audio-only file. Choose the same PCM/WAV 48KHz 16-bit. Then Import that into the first Save_As, the one with no music. Again, try placing this file on Audio Track 2. Test.
    I worry that maybe one, or both of the fixed Audio Tracks, Narration, and/or Soundtrack, is getting in the way. The above tests will be quick and should get you the results that you need, with what you have. The tests will also tell us if something is wrong with the Soundtrack Track, as it seems to be killing the AV's Audio on Audio Track 1.
    Good luck, and please report,
    Hunt

  • Can I retrieve photos burned onto DVD (I used iDVD)?

    I lost my hard drive last week and am in the process of rebuilding my photo gallery. In Decemeber, I burned a DVD with all of my desired photos from 2012 using iDVD. In addition to the videos and slideshows that I included in the main menu, I made sure to burn the actual photos to the DVD as well. Except now, I don't know how to retrieve the photos from the DVD to re-import into iPhoto. Any suggestions?

    jrusdal wrote:
    I had to reset my iphone after a backup and want to get all of the photos / notes from the backup now for my 'new' phone
    So restore the iTunes/iCloud backup to the new device: [Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support]

  • Elements 9 Crashes when burning onto DVD

    I've attempted to burn a project with a newly bought Premiere Elements 9 software.  It goes through rendering all three Disc Menus just fine. Then it crashes my entire computer(multiple times) when getting to approx 4-5% burning process.  This morning I've spent 4 hours uninstalling Adobe Photoshop Elements 9 and Premiere Elements 9, rebooting, then re-installing everything.  Same thing happened.
    I use to run Photoshop 7, and don't recall this happening.
    Please help.  My school project is due on Monday, which includes burning it onto a DVD for a grade!
    Thanks
    Elizabeth

    Start reading here
    http://forums.adobe.com/thread/416679
    Some specific information that is needed...
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    My 3 hard drives are configured as... (WD = Western Digital)
    1 - 320G WD Win7 64bit Pro and all programs
    2 - 320G WD Win7 swap file and video projects
    3 - 1T WD all video files... read and write
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    And, finally, the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/

  • Trouble burning onto DVD

    So, I'm done making my DVD. I hit the simulate button and everything plays fine. But when I go to burn it, this comes up: "Building was not successful. See log."
    I check the log and it says this, "No video or still assets found in Track: Track 1"
    What does that even mean?

    It means exactly what it says.
    When you import your assets (the video and audio files) you have to drag them onto the green Track icon in the Graphical View, which is at the top left of your screen.
    You then have to either link the track to a menu button, or designate the track as First Play, in which case it will start automatically when inserted into a player.
    The DVD Studio Pro Users Manual is a good place to start, it contains tutorials and detailed instructions about the complex process of authoring DVD disks.

  • Wont burn onto DVD!!!NEED HELP

    i just spent 20 hours making an imovie, and i finished it all up, but when i put the DVD-R in, it shoots it right back out. Also when I click to burn it says i dont have the supported superdrive. The computer is an IBOOKG4. I went online and checked and it says it has a superdrive(DVD-RW) so i dont see why its not working. Did i get the wrong types of disks (DVD-R) or does anyone else know what is wrong?

    Hi Matt,
    Of course you can transfer your file to another computer and because yours is a portable it is so much easier. You need to use a proccess called 'Target Disc Mode'. All you do is, get the two computers together and connect them via a double ended firewire cable. Start your computer while holding down the 'T' key and the Firewire logo will appear on the screen of your iBook. Your iBook's HD will appear on the screen of the other computer. Just open the HD icon of your computer and drag the file out onto the desktop of the second computer. Once the file has finished copying to the other computer just eject the HD icon of your computer and turn your iBook off by holding down the Power button for a few seconds.
    This will only work on two Macintosh computers running OSX and it is best to export your project to Quicktime before you try to export it to another computer to avoid problems with different versions of iMovie.
    Here's the link to the Mac document on how to do it -
    http://docs.info.apple.com/article.html?artnum=58583

  • Looping when burned onto DVD

    I am not sure if this is a Final Cut or iDVD question -
    But, I'd like to take my project, convert it, burn it to DVD and have the piece loop when it's over.
    (this is going to be used for a trade show video that will be played over and over for hours)
    Can anyone point me in the right direction?

    This is an iDVD question for sure, but you'll finding looping in the advanced menu I think.

  • Some videos are not being loaded onto my Ipod

    Hello everyone!
    I have had around 10 iPods in the past, and I am yet to have one that does not have a problem. My last two, however, I am beginning to believe have to do with iTunes. Only 6 of my t.v. episodes load onto my iPod when I update it. I have purchased all of these off of iTunes. I have also lost access to around 3 of my videos all together. Is there a way to retrieve them?
    Thank you for reading,
    Mike

    So all of the t.v. shows are in iTunes, but they won't copy over/sync up to your iPod? Am I understanding you correctly? Maybe what is happening is this. Check your settings for syncing tv shows and see if you have selected to sync "all unwatched" episodes. If you've watched them in itunes before syncing, then they won't get put on your ipod. I can't tell you what the other settings may be as I've got my ipod in "manually manage music and videos" and if I switch it over right now, I'll loose everything on the iPod. Just look at your various options in those drop down boxes and see what fits your situation best.

  • No sound when movies are burned onto DVD

    I have sound in my movies when I preview the project before I burn it but after it's burned the sound disappears from the movies... The theme music is there but no sound from the movies. Was I suppose to import sound or something? Please help.

    Hi, am not an expert like the others are, but I too had the same problem and read somewhere in this forum that this happens (no sound) if you had chapter markers on your iMovie and you placed the chapter mark at a place that doesnt exactly align with where the music for that chapter starts. So what I did was to go back to my iMovie project, i deleted the previous chapter marker, made sure the music for that chapter started exactly where the chapter started, and then added a new chapter marker. then when you open iDVD, it will prompt you if you want to update your "assets", say yes. then go to Movies and drag that same project in.
    I hope it works for you. It did for me (but unfortunately I found out there was no music in one of my chapters only after I had already burned 10 copies!!). Hope you are luckier.

  • Need help with setting up lightscribe to burn onto dvd label with external

    Bought the LG external mac compatible drive and have the smile on my mac disc label (bought) - have set the 'CD Boundary for text formatting' to LightScribe Full Label and there is supposed to be a lightscribe pop-up popping up when i press print but no pop up.
    Could the lightscribe that i downloaded from their site not be installed even though it said 'successfully installed?'
    anyone know what i am talking about? and could help?
    thx
    debcoo

    Lightscribe is not an Apple product, so you might get better answers on the Lightscribe forums:
    http://www.lightscribe.com/discussionBoards/index.aspx?g=posts&t=4296

  • Trying to burn a DVD Problems!!

    I am tryin to burn a DVD from IDVD , when I insert the DVD in (creating your DVD) it tells me I have  1hour & 30mins. in time remaining , aprox. 30mins. into the burning process the DVD ejects & states ( multiplexing & burning with 1 hour left ) as mentioned the DVD is ejected & states done !!! . With nothing being burned onto the DVD ???   Can someone help please !!!    Thank   you    Pat !!

    Good evening, Pascal
    "Multiplexing errors" can happen for many reasons.  In addition to the fundamentals above, consider these ideas from another of the iDVD experts in this forum:
    https://discussions.apple.com/message/24811443#24811443
    John

Maybe you are looking for