(Some AVI files not working with PlayVideo.java)Java Doctors - NEEDED

Hi ,
I m working on JMF, I m not getting video output while I run some
.AVI files 1999 version and some movie clips which are .dat files
Is there any solution for this.?
I think JMF should give proper solution for all videos and audios.
Thanks for all who are working in this wonderfull API
Thanks for SUN also for their work in Java and JMF ....
BYE,
KIRAN Kumar Jakkaraju
Java Developer,
Salvation Software Services.

Thank you very much.
But AVI and .mov will take much size than .dat files.
so its better to concentrate in .dat files also for JMF I think.
Is it true.
I have a file of avi takes - 100mb for 3 min play of video
if u convert to .mov takes - 60-70mb for the same time of video.
I think you you have .dat files , for a movie of 2hours it takes only 1gb of size and can be shipped in two 500mb cds.
Please if you have any solution to reduce the avi file sizes please let me know.
Thank you,
Kiran

Similar Messages

Some AVI files not working?

OK, let me try and sum this up.
using a cannon power shot i have filmed time lapse footage before and brought it into an older version of imove and gotten it to open on my old (white edged) imac. I now have imove11 and a new imac. these same timelapse AVI files will not play on quicktime now or register to be found for imovie even with an import. Regula speed AVI files will still download from the camera and work on quicktime and imove11.
now here is what is throwing me off.
Iphoto11 will import these same files and they will play problem free in there.
when i download them and open them through image capture they download no problem.
wheni double click to open in quicktime i get the can't be opened, may need additional software error.
i have made compilations in the past of these type AVI time lapse files so why can't i now?
help please!

Thank you very much.
But AVI and .mov will take much size than .dat files.
so its better to concentrate in .dat files also for JMF I think.
Is it true.
I have a file of avi takes - 100mb for 3 min play of video
if u convert to .mov takes - 60-70mb for the same time of video.
I think you you have .dat files , for a movie of 2hours it takes only 1gb of size and can be shipped in two 500mb cds.
Please if you have any solution to reduce the avi file sizes please let me know.
Thank you,
Kiran

When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

Why do some AVI formats not work properly with IMAQ?

I've been trying to do work with manipulating AVI files in Labeled, but it seems that mine will not work. Whenever I try to load them I get the error:
Error -1074396005 occurred at IMAQ AVI2 Close
Possible reason(s):
IMAQ Vision: Invalid AVI session.
What's strange is some AVI files will be read in fine. If anyone could explain why I'm seeing this error or how to convert my AVI files to the correct version I'd appreciate it. I've attached two files. The one labeled test will not work. The one labeled Balloon will.
Solved!
Go to Solution.
Attachments:
AVIs.zip ‏3466 KB

Hi,
Does my code work fine? I attache the vi as well. I modify my code that is very similar with yours, but it is working fine as well. I put here for your reference.
BTW, i can't open your code due to the PNG file without code. You can Save for Previous as 2010 Version, or Edit-->Create VI Snippet... save as png file with code.
Colin
LV7.1/8.2/8.2.1/8.5/8.6/9.0/2010/2013; testing system development
Please Mark the solution as accepted if your problem is solved and donate kudoes
Home--www.colinzhang.net
Attachments:
AVI Ex1.vi ‏43 KB

How can I get avi files to work with imovie08?

Hi I bought a macbook last year and have loved creating imovie videos by simply using the video function on my digital camera. My daughter was born last year and we have a great collection of clips of her first 7 months. I'd now like to take things a step further and put together a wedding video.
We had our wedding day filmed on a digital camcorder by a friend and he has given my 25MB of avi files which I would like to import into imovie and make into a video however I understand that this format isn't compatible. Is there a way of getting it to work and if so please can you tell me in very simple terms what I need to do to get the files to work with imovie? (I'm not very technical)
Thanks
Matt

I do not know of a way to import .avi files directly into iMovie, and I am positive that this is not actually possible as iMovie only supports the importation of .mov, .mp4 (mpeg4) and .dv filetypes.
What you could do is use a video converter (there are some good ones that are availible free, eg MPEG Streamclip (http://www.apple.com/downloads/macosx/video/mpegstreamclip.html)) to convert those avi movie files to either of the 3 video formats iMovie supports, then import them.
MPEG Streamclip does sound a little complicated for you but it is the best I have found, any more questions just post them here.

9810 not working with bose QC 20 headphones - need urgent support!!!

hi
My blackberry 8910 is not working with my new bose QC 20 - noise cancellation headphone, please assist me on this.
Prasanth

That may actually work, yes. Even an extension cable might get you past this.

Our online paychex will not work with Firefox 4. I need to go back to Firefox 3

We use Paychex online pay service. Their program is not working with Firefox 4; they say they can work with firefox 3

Thanks for your help. I purchased the snow leopard and am trying to install it but I keep getting the following message: "There was a problem reading the MAC OS X Install DVD. Carefully clean the disc and try installing again." So this disc went from the box to my computer... should not need to be cleaned, right? But I've tried cleaning and installing again - multiple times and I keep getting the same message. Please, please help. Thanks

Some avi-files not playing on QuickTime Pro 7.0.4

I tried to play a few avi-file movies using QuickTime Pro 7.0.4 on my Mac OS X 10.4.4, but unfortunately, I keep getting the message: "Some necessary QuickTime software is missing. It may be available on the QuickTime Web site." After going on that site, I downloaded some of the available free software, but the problem remains. Playing the movies with a third-application like the VLC, works fine. I wish QuickTime Pro would have the same capabilities in playing avi files like other Players. Do you have an idea how I can solve the problem?
Thanks for your support!
iBook G4 1GhZ Mac OS X (10.4.4) 60GB, 640MB RAM, Bluetooth, Airport Express

Thanks for all your help guys. I guess I will remain with the VLC for playing AVI files that donnot play on the QT Player as the VLC plays almost any movie file. I came across an interesting article regarding the subject:
QuickTime: About Playing .AVI Files
Learn why an .AVI file may not play as expected in QuickTime Player.
AVI stands for Audio Video Interleave. The .AVI format is what is known as a container format. It specifies a way in which a file may contain audio and video data. It does not specify how that data is encoded. The encoding of audio and video data is specified in what are known as codecs. A codec (short for COmpressor/DECompressor) tells the computer how to decode the audio and video tracks that have been encoded within the .AVI file. QuickTime Player can use numerous codecs by default. You can also add additional codecs to extend QuickTime's features using plug-ins or third-party installations.
When QuickTime opens an .AVI file, it checks to see which codecs were used to encode the audio and video tracks within it. For example, an .AVI file may contain a video track encoded in the Cinepak codec and an audio track encoded with the ALaw 2:1 codec. If both the audio and the video were compressed using a codec that QuickTime can use, the file will play normally. If the audio or video or both were created using codecs that QuickTime cannot use, you may see a message like the following:
"QuickTime is missing the software needed to perform this operation. Unfortunately, it is not available on the QuickTime server"
or
"You may experience problems playing a video track in "filename.avi" because the required compressor could not be found."
These messages are not an indication that anything is wrong with QuickTime Player.
Lists of audio and video codecs included with and supported by QuickTime are available from the QuickTime specifications page.
Using QuickTime Player, you may be able to determine which codec was used to compress an audio or video track:
QuickTime 6 and earlier
Open the file in QuickTime Player.
From the Movie menu, choose Get Movie Properties.
From the left pop-up menu in the Properties window, choose Sound Track or Video Track.
From the right pop-up menu, choose Format. The Format section shows the codec.
QuickTime 7
Open the file in QuickTime Player.
From the Window menu, choose Show Movie Info. The codec is listed next to Format.
If the .AVI file is encoded using a codec that is not included with QuickTime, you might be able to find and add that codec so QuickTime can play media encoded with it. Contact the party that publishes or distributes the codec to see if a QuickTime version is available. Many third-party QuickTime components are available on the QuickTime components page.
iBook G4 1GhZ Mac OS X (10.4.4) 60GB, 640MB RAM, Bluetooth, Airport Express

Why do some AVI files not import into iMovie?

Some of my AVI video does not import into iMovie. When I try, it gives me a non-specific error message. Is there a way I can import it? Other AVI files import with no problem.

AVI is a container, not a format; the audio and video in an AVI may use any codec, and some codecs can't be used in Mac OS X. Installing Perian may help.
(34138)

Some .avi files dont open with QuickTime or MPlayer. Please help!

Hi! I have few .avi files which are not played by QuickTime and when I open them with MPlayer OS X 2, the sound is on but the video doesnt come up. Please help!

Hi Niel, Installed both. Both play the sound but NO video.. When opened in MPEG Streamclip no messages appeared so, there was nothing to accept. Appreciate your reply but if you know any other way of working this out please help. Many thanks Niel!

.psd file not working with Motion 5

I have a .psd that doesn't want to work with Motion 5. Every time I try and import it, Motion says that it's not a valid codec. I can't figurt out what's going on, all my other .psd files seem to work.
Yes, I'm using RGB colors not CMYK (that is the onne known issue thus far).
I'm just totally at a lose. Here's what the console says, if anyone has any insight, I woudl appreciate it:
6/27/11 1:12:55 PM [0x0-0xb50b5].com.apple.motionapp[1326] CPSDSlicesResourceItem::Load(): unsupported slice resource item version (8)
6/27/11 1:12:55 PM Motion[1326] -[ProPSDImageRef initWithPath:] - WARNING - invalid or nonexistent file at /Users/compy/Desktop/PostAppointmetVideo/Corrolary Projects/mockup.psd. Image ref not created.

I'd be happy to email one of them to you if you'd like. Or give it to you in some fashion at any rate. I'm not seeing this problem pop up anywhere else on the internet, so I'm guessing it's just me. But it would be nice to check with another motion user.
Email me at jay <no space, just keeping the bots guessing> carr <at> gmail <I'm sure you can guess> com.
It certainly would be nice to see what happens when I give it to you. I'm having some very significant issues with PDFs and can't figure out why...

Why do some pdf files not open with Adobe Reader X, most open OK?

On my wife's 64 bit WIN 7 computer, a some pdf files will not open, but most open OK.
She uses Acrobat Reader X and MS Office 2010.
The same problem files open with no problem on my very similar computer.
Is the problem with some setting on the Acrobat Reader or something else?
Sometimes there is this error message when the problem files do not open:
Find Click2run64.msi file to install MS Office Click to Run.
But MS Office Click to Run is already installed on her PC. It is not on my PC.
Thanks for your help.

The latest Reader is 11.0.01, not 11.0.1. It is named Adobe Reader XI.
I did uninstall the Reader X and installed this latest one.
But it did not solve the problem, still could not open the problem pdf's .
I did find the problem was caused by the MS Office Click to Run error referred to in my original message. As far as I know we have no use for that on my wife's computer. Not sure how it got there. I uninstalled it and so far the problem pdf's open fine now. Problem solved.
Thanks for your help.
Frank M.

Reading the EDI X12 file not working with the patch 8233048

Hi
I have installed the latest path 8233048 on my windowsXP system, now I am not able to see the File being polled and processed.
In b2b.log I can see the last message as "oracle.tip.adapter.b2b.data.MsgListener:run start listening on message" after that no log.
In b2b_dc_transport.log, I can see only
2009.02.07 at 20:35:45:236: B2BStarter thread: (DEBUG) TransportProperties.TransportProperties():http.receiver.registry_port=5110;smtp.receiver.protocol=imap;PROTOCOL_ENDPOINT=null;file.receiver.polling_interval=30;polling_interval=30;http.receiver.instance_name=IP;
2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) initialize TransportReceiver: [IRIS_Transport_Server < file > < IRIS >]
2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) FileReceiver.init() started ....
2009.02.07 at 20:35:45:287: B2BStarter thread: (DEBUG) FileReceiver.init() completed.
Could you please tell me if I need to do any changes.
This is working on b2b with only patch: 5907304 which is installed in another windows XP system.
The same configuration with the latest patch is not working.
Edited by: Praveena Paruchuru on Mar 7, 2009 7:56 AM

Hi Dheeraj,
I have restarted my system many times, not only B2B.
I have taken the print out of both the tip.properties and compared line by line and wanted to check out which line was making it not to function.
I added the mismatching lines one by one by one, it was working for all teh updates. Finally I changed it to my new tip.properties.
Then surprisingly it is working.

FCP Quicktime movie files not working with iDVD

I have been using iDVD for years with no issues. Now, whenever I export a QT file from FCP 7 and use it in iDVD, I get a blank screen with audio and no video.
I am able to work around the problem by using "Export Using Qucktime Conversion" and creating a smaller file, but I've never had to do that before. What in the world am I missing here? Shouldn't I be able to export as a QT movie, as long as the file is not gigantic? (the most recent one I used and had this problem occur was only about 500mb). Thanks for any help...
Ben

Hmmm,
Well this is helpful information but unfortunately didn't solve my problem. The movie in question is only 5 1/2 minutes long. When I export it as a QT movie, iDVD "acts" like everything is fine; I can preview it within iDVD, etc.But when I burn the disc, it comes out blank. I then went back to FCP and exported it using QT conversion, and the DVD burned just fine. (I exclusively use Taiyo Yuden media and have never had a bad disc).
This is just a simple 16:9 movie, shot at 720/30p on a Canon DSLR. I ingested with Log and Transfer using ProRes422, then dropped it onto the timeline, added a music track, rendered, and exported as Quicktime movie. It looks great on my desktop using the QT player, but it simply will not work in iDVD. Still stuck here...
Ben

Empty Temporary Internet Files not working with IE9

Hey everyone. I have an issue in my domain environment where the "Empty Temporary Internet files folder when browser is closed" is enabled but not actually working for pc's that have IE9.
I have configured this policy in both Computer Config and User Config on separate occasions to see if it would work but it just doesn't for users IE9. My domain is still a Server 2003 domain and I manage group policy through the RSAT Tool Group Policy
Management on my machine. All machines in my environment are Windows 7 x64 with IE9 except for a few with IE11. The funny thing is the computers with IE11 (like myself) the GPO works great. The temporary files get
flushed whenever I close my browser. Unfortunately everyone with IE9 the settings say they are applied but they do not work. I was wondering if it had something to do with the inetres.admx files on my pc since I use IE11. Anyone have any
ideas why the policy would only work for IE11 browsers instead of all browsers?
The temporary IE folders are in the default locations and I noticed that the IE9 users can't navigate to the content.ie5 directory as well. When entering content.ie5 in path they can get to it and when clicking on the random directory's it prompts you
with a windows security warning.
Any help or guidance would be great. Thanks!
----E----

Hi,
Based on the decription, we can try to enable the following policy setting to see if it helps:
Computer configuration or User Configuration\Policies\Administrative Templates\Windows Components\Internet Explorer\Delete Browsing History\Allow deleting browsing history on exit
Regarding this point, the following thread can be referred to for more information.
Empty Temporary Internet Files Folder when brower is close does not work in windows 7 X64
https://social.technet.microsoft.com/Forums/en-US/f48d22f7-d46f-40ce-bc40-04b7d3a05405/empty-temporary-internet-files-folder-when-brower-is-close-does-not-work-in-windows-7-x64?forum=w7itproinstall
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

(Some AVI files not working with PlayVideo.java)Java Doctors - NEEDED

Similar Messages

Maybe you are looking for