Some body please help!
My phone was working perfectly fine I had just sent a txt message to my wife and recieved one back when i went to check the message the slide to open screen was waaaay zoomed in. i tried turing it off then back on then the reset by holding the home button and top button down for 10 seconds. and it is still zoomed in. can some one please help me i would really appreciate it. thank you.
zak
Page 190 of the manual:
"Zoom in or out: Double-tap the screen with three fingers. By default, the screen is
magnified by 200 percent. If you manually change the magnification (by using the tap-
and-drag gesture, described below), iPhone automatically returns to that magnification
when you zoom in by double-tapping with three fingers. "
"Turn Zoom on or off: In Settings, choose General > Accessibility > Zoom and tap the
Zoom On/Off switch. "
Similar Messages
-
I have forgoten the security questions,i have tryed ewerithing to reset all of the instructions i have recived from the apple support team. I still can not reset the questions. Can some body please help me to reset them. Thank you and best regards
Since this is a user-to-user support forum, there isn't much we can do other than refer you to the following instructions and as noted in the instructions, then to Apple Support if you can't reset as shown in the instructions: If you forgot the answers to your Apple ID security questions
-
Some body please help about the Inventory FIFO (FIRST IN FISRT OUT ) query is very slow
I have table ''tran_stock'' to store a transaction (IN-OUT) of the stock.
The problem is when the transaction rows are more than 50000 the query to get the balance
stock (Total 'IN' - Total'Out' by FIFO) is very slow . Somebody please suggest me to do this.
This is my query
;WITH OrderedIn as (
select *,ROW_NUMBER() OVER (PARTITION BY Stock_ID ORDER BY TranDate) as rn
from Tran_Stock
where TxnType = 'IN'
), RunningTotals as (
select Stock_ID ,Qty,Price,Qty as Total,Cast(0 as decimal(10,2)) as PrevTotal , trandate , rn from OrderedIn where rn = 1
union all
select rt.Stock_ID,oi.Qty,oi.Price,Cast(rt.Total + oi.Qty as decimal(10,2)),Cast(rt.Total as decimal(10,2)) , oi.TranDate ,oi.rn
from
RunningTotals rt
inner join
OrderedIn oi
on
rt.Stock_ID = oi.Stock_ID and
rt.rn = oi.rn - 1
, TotalOut as (
select Stock_ID ,SUM(Qty) as Qty from Tran_Stock where TxnType='OUT' group by Stock_ID
) , GrandTotal as
select
rt.Stock_ID , rt.QTY AS original ,SUM(CASE WHEN PrevTotal > isNULL(out.Qty, 0) THEN rt.Qty ELSE rt.Total - isNULL(out.Qty, 0) END) AS QTY , Price , SUM(CASE WHEN PrevTotal > isNULL(out.Qty, 0) THEN rt.Qty ELSE rt.Total - isNULL(out.Qty,
0) END * Price) AS Ending , rt.TranDate
from
RunningTotals rt
LEFT join
TotalOut out
on
rt.Stock_ID = out.Stock_ID
where rt.Total > isNull(out.Qty , 0)
group by rt.Stock_ID , Price , rt.TranDate , rt.QTY
) SELECT * FROM GrandTotal order by TranDate option (maxrecursion 0)
AND this is my Table with some example data
USE [TestInventory]
GO
/****** Object: Table [dbo].[Tran_Stock] Script Date: 12/15/2014 3:55:56 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[Tran_Stock](
[TranID] [int] IDENTITY(1,1) NOT NULL,
[Stock_ID] [int] NULL,
[TranDate] [date] NULL,
[TxnType] [nvarchar](3) NULL,
[Qty] [decimal](10, 2) NULL,
[Price] [decimal](10, 2) NULL
) ON [PRIMARY]
GO
SET IDENTITY_INSERT [dbo].[Tran_Stock] ON
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (1, 1, CAST(0x81350B00 AS Date), N'IN', CAST(200.00 AS Decimal(10, 2)), CAST(750.00 AS Decimal(10, 2)))
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (2, 1, CAST(0x85350B00 AS Date), N'OUT', CAST(100.00 AS Decimal(10, 2)), NULL)
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (3, 1, CAST(0x8A350B00 AS Date), N'IN', CAST(50.00 AS Decimal(10, 2)), CAST(700.00 AS Decimal(10, 2)))
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (4, 1, CAST(0x90350B00 AS Date), N'IN', CAST(75.00 AS Decimal(10, 2)), CAST(800.00 AS Decimal(10, 2)))
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (5, 1, CAST(0x99350B00 AS Date), N'OUT', CAST(175.00 AS Decimal(10, 2)), NULL)
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (6, 2, CAST(0x82350B00 AS Date), N'IN', CAST(150.00 AS Decimal(10, 2)), CAST(350.00 AS Decimal(10, 2)))
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (7, 2, CAST(0x88350B00 AS Date), N'OUT', CAST(40.00 AS Decimal(10, 2)), NULL)
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (8, 2, CAST(0x8C350B00 AS Date), N'OUT', CAST(10.00 AS Decimal(10, 2)), NULL)
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (9, 2, CAST(0x98350B00 AS Date), N'IN', CAST(90.00 AS Decimal(10, 2)), CAST(340.00 AS Decimal(10, 2)))
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (12, 2, CAST(0x98350B00 AS Date), N'IN', CAST(10.00 AS Decimal(10, 2)), CAST(341.00 AS Decimal(10, 2)))
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (13, 2, CAST(0x99350B00 AS Date), N'OUT', CAST(30.00 AS Decimal(10, 2)), NULL)
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (14, 2, CAST(0x81350B00 AS Date), N'IN', CAST(120.00 AS Decimal(10, 2)), CAST(350.00 AS Decimal(10, 2)))
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (15, 2, CAST(0x89350B00 AS Date), N'OUT', CAST(90.00 AS Decimal(10, 2)), NULL)
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (17, 3, CAST(0x89350B00 AS Date), N'IN', CAST(90.00 AS Decimal(10, 2)), CAST(350.00 AS Decimal(10, 2)))
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (18, 3, CAST(0x8A350B00 AS Date), N'OUT', CAST(60.00 AS Decimal(10, 2)), NULL)
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (19, 3, CAST(0x5D390B00 AS Date), N'OUT', CAST(20.00 AS Decimal(10, 2)), NULL)
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (20, 1, CAST(0x81350B00 AS Date), N'IN', CAST(200.00 AS Decimal(10, 2)), CAST(750.00 AS Decimal(10, 2)))
INSERT [dbo].[Tran_Stock] ([TranID], [Stock_ID], [TranDate], [TxnType], [Qty], [Price]) VALUES (21, 1, CAST(0x85350B00 AS Date), N'OUT', CAST(100.00 AS Decimal(10, 2)), NULL)Hi,
You dont have any Index on the table, so the filters (where part in the queries) and the sorting (order by, group by) make your query slow. it take time to sort or filter data without Index. It is like reading a book with 3k pages and trying to find a specific
subject. You have to read the all books, but if you have "table of contents" which is the book index, then this can be done fast.
* check the Execution plan (the image here show part of your query's execution plan). the query scan the all table 3 times...
there is one sort that use 81% of the query resources... I will go sleep soon (it is
23:58 In Israel now), and I don't know if I will have time to read the query itself and improved it, so lets start with indexes :-)
** as a first step after or before you create the right Indexes you should remove the recursive all together. there is no reason for lopping the data when you can use it as a SET. This is where the relational database's power come to life :-)
for example check this code. I only use your first part of the code using the first 2 CTE tables. compare result.
;WITH
OrderedIn as (
select *,ROW_NUMBER() OVER (PARTITION BY Stock_ID ORDER BY TranDate) as rn
from Tran_Stock
where TxnType = 'IN'
, RunningTotals as (
select Stock_ID ,Qty, Price, Qty as Total, Cast(0 as decimal(10,2)) as PrevTotal, trandate , rn
from OrderedIn where rn = 1
union all
select
rt.Stock_ID, oi.Qty, oi.Price, Cast(rt.Total + oi.Qty as decimal(10,2))
,Cast(rt.Total as decimal(10,2))
, oi.TranDate ,oi.rn
from RunningTotals rt
inner join OrderedIn oi on rt.Stock_ID = oi.Stock_ID and rt.rn = oi.rn - 1
select * from RunningTotals
-- This will do the same as the above query
select
Stock_ID, Qty, Price
, SUM(Qty) over (PARTITION BY Stock_ID order by TranDate ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) as Total
,TranDate--,TranID, TxnType
from Tran_Stock
where TxnType = 'IN'
order by Stock_ID
Ronen Ariely
[Personal Site] [Blog] [Facebook] -
I dont have FaceTime on my 4G some body please help ! Thanks
I've bought my 4G brandnew factory unlocked but still I cant run FaceTime app neither could i find it in settings.. does anyone have any idea of whats going on ?
There is no FaceTime app: Settings>Phone>FaceTime>On.
-
Hi all,
I have got a microstar MS 6340 ver 1 motherboard and i tried installing a PCI 32m nvida graphics card under windows xp. when ever i turn the PC on, i get no screen and the machine keeps beeping. the motherboard has an onboard graphice card but i dont know how to diable it. i have searched the web and cant find the manual to help me or someone to tell me what to do. can some one please help me disable the onboard graphic's.
Thanks a million.
Ps. if any body knows where to get the manual from, can you please post the link for me.
Cheers ) ) )wird... in the v1 manual there is no indication for integrated VGA.... no wonder your board is the ms6340M v1 (is it??)....
and thats a little difference
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=131&MODEL=MS-6340M
here is the manual for this mainboard
http://download.msi.com.tw/support/mnu_exe/E6340Mv1.0.exe
there is the frame buffer seting but there is no disable option for the on board vga....
try the new bios... (but check if this is the corect board!!!)
this is the link for v4.7 bios
http://download.msi.com.tw/support/bos_exe/6340v47.exe
[size=15]but be cereful i'm not responsible for any miss flushes [/SIZE] -
Security question keep saying they are wrong and I know they are right. I can't change them cuz when I try it tells me to answer the questions. I have tried everything changing my account and all and still can't get it can some one please help me out.
Go here and select "Reset your password." You will receive an email message with a link that bypasses the questions. You will then be able to select and answer the questions again.
-
i am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???
APPLE need to do something here!!!!!!1Hi...
Thanks for your repaly .
and i am not bale to post a question in developer forum i tried hard but i didnt get .Can you plz explain me how to post a question in developer forum this is very helpfull for me.Because i never did this thing. -
Can some one please help me with this?
You would probably get some response if you posted your question in the Photoshop forum ...
I'll move it there for you.
- Dov -
HT6154 can some one please help me ASAP
can some one please help me ASAP
I went to my settings then general and restored my Iphone to factory default and its been stuck on the loading screen for more than an hour and I don't know what to doConnect iPhone in newest iTunes and Hit Restore
-
My sql query running for more than 4 hours could some one please help me
Hi ,
I have one sql executable and the query is running for more than 4 hours . Could some one please help me in tuning the sql.
The stats and all the general stuff is intact at db level :
SELECT pasl.item_id item_id
, pv.vendor_name vendor_name
, msif.segment1 item
, NVL(cic.item_cost,0) item_cost
, NVL(pasl.attribute1,0) asl_cost
FROM apps.mtl_system_items_b msif
, apps.po_approved_supplier_list pasl
, apps.cst_item_cost_type_v cic
, apps.po_vendors pv
, apps.po_asl_statuses past
, apps.mtl_item_categories mic
, apps.mtl_categories_b mc
, apps.mtl_category_sets_b mcb
, apps.mtl_category_sets_b mcbm
, apps.mtl_categories_b mcm
, apps.mtl_item_categories micm
WHERE pasl.item_id = msif.inventory_item_id
AND msif.inventory_item_id = cic.inventory_item_id
AND msif.inventory_item_status_code in ('Active','ENG HOLD')
AND cic.cost_type = 'Frozen'
AND msif.organization_id = cic.organization_id
AND EXISTS (SELECT 1
FROM apps.mtl_system_items_b msin,
apps.mtl_parameters mpn,
apps.org_organization_definitions oodn
WHERE msin.organization_id = mpn.organization_id
AND mpn.organization_id = oodn.organization_id
AND msin.inventory_item_id = msif.inventory_item_id
AND oodn.operating_unit = :p_ou
AND cic.organization_id = 87
AND NVL(pv.end_date_active,TRUNC(SYSDATE+1)) > TRUNC(SYSDATE)
AND pv.vendor_id = pasl.vendor_id
AND mcbm.structure_id = mcm.structure_id
AND nvl(mcm.start_date_active, (SYSDATE - 1)) < SYSDATE
AND nvl(mcm.end_date_active, (SYSDATE + 1)) > SYSDATE
AND mcbm.category_set_id = 1
AND micm.inventory_item_id = msif.inventory_item_id
AND micm.organization_id = msif.organization_id
AND micm.category_set_id = mcbm.category_set_id
AND micm.category_id = mcm.category_id
AND (SUBSTR(mcm.segment1,1,2) = 'FG' OR msif.item_type LIKE 'FG%')
AND mcm.segment3 NOT IN ('4','5','9','A')
AND mcb.structure_id = mc.structure_id
AND NVL(mc.start_date_active, (SYSDATE - 1)) < SYSDATE
AND nvl(mc.end_date_active, (SYSDATE + 1)) > SYSDATE
AND mcb.category_set_id = 1100000022
AND mic.inventory_item_id = msif.inventory_item_id
AND mic.organization_id = msif.organization_id
AND mic.category_set_id = mcb.category_set_id
AND mic.category_id = mc.category_id
AND SUBSTR(mc.segment2,1,2) = pv.attribute6
AND ROUND(NVL(pasl.attribute1,0),2) <> ROUND(NVL(cic.item_cost,0),2)
AND pasl.asl_status_id = past.status_id
AND UPPER(past.status) = 'APPROVED'
--and pv.attribute6 not in('IN','BG','CT')
and msif.inventory_item_id = :p_item_id42737
UNION
SELECT pasl.item_id item_id
, pv.vendor_name vendor_name
, msif.segment1 item
, NVL(cic.item_cost,0) item_cost
, NVL(pasl.attribute1,0) asl_cost
FROM apps.mtl_system_items_fvl msif
, apps.po_approved_supplier_list pasl
, apps.cst_item_cost_type_v cic
, apps.po_vendors pv
, apps.po_asl_statuses past
, apps.mtl_item_categories mic
, apps.mtl_categories_b mc
, apps.mtl_category_sets_b mcb
, apps.mtl_category_sets_b mcbm
, apps.mtl_categories_b mcm
, apps.mtl_item_categories micm
WHERE pasl.item_id = msif.inventory_item_id
AND msif.inventory_item_id = cic.inventory_item_id
AND msif.inventory_item_status_code in ('Active','ENG HOLD')
AND cic.cost_type = 'Frozen'
AND msif.organization_id = cic.organization_id
AND EXISTS (SELECT 1
FROM apps.mtl_system_items_b msin,
apps.mtl_parameters mpn,
apps.org_organization_definitions oodn
WHERE msin.organization_id = mpn.organization_id
AND mpn.organization_id = oodn.organization_id
AND msin.inventory_item_id = msif.inventory_item_id
AND oodn.operating_unit = :p_ou
AND cic.organization_id = 87
AND NVL(pv.end_date_active,TRUNC(SYSDATE+1)) > TRUNC(SYSDATE)
AND pv.vendor_id = pasl.vendor_id
AND mcbm.structure_id = mcm.structure_id
AND NVL(mcm.start_date_active,(SYSDATE - 1)) < SYSDATE
AND NVL(mcm.end_date_active, (SYSDATE + 1)) > SYSDATE
AND mcbm.category_set_id = 1
AND micm.inventory_item_id = msif.inventory_item_id
AND micm.organization_id = msif.organization_id
AND micm.category_set_id = mcbm.category_set_id
AND micm.category_id = mcm.category_id
AND (SUBSTR(mcm.segment1,1,2) = 'FG' OR msif.item_type LIKE 'FG%')
AND mcm.segment3 NOT IN ('4','5','9','A')
AND mcb.structure_id = mc.structure_id
AND NVL(mc.start_date_active,(SYSDATE - 1)) < SYSDATE
AND nvl(mc.end_date_active,(SYSDATE + 1)) > SYSDATE
AND mcb.category_set_id = 1100000022
AND mic.inventory_item_id = msif.inventory_item_id
AND mic.organization_id = msif.organization_id
AND mic.category_set_id = mcb.category_set_id
AND mic.category_id = mc.category_id
AND SUBSTR(mc.segment2,1,2) = pv.attribute6
AND pasl.asl_status_id = past.status_id
AND UPPER(past.status) = 'APPROVED'
--and pv.attribute6 not in('IN','BG','CT')
AND NVL(pasl.attribute1,0) = 0
AND NVL(cic.item_cost,0) != 0
and msif.inventory_item_id = :p_item_id42737
The execution plan displayed in taod is as below :
Plan
SELECT STATEMENT ALL_ROWSCost: 464 Bytes: 905 Cardinality: 2
140 SORT UNIQUE Cost: 464 Bytes: 905 Cardinality: 2
139 UNION-ALL
69 NESTED LOOPS Cost: 185 Bytes: 446 Cardinality: 1
67 NESTED LOOPS OUTER Cost: 180 Bytes: 444 Cardinality: 1
65 NESTED LOOPS Cost: 178 Bytes: 408 Cardinality: 1
63 NESTED LOOPS Cost: 177 Bytes: 404 Cardinality: 1
60 NESTED LOOPS Cost: 176 Bytes: 378 Cardinality: 1
57 NESTED LOOPS Cost: 174 Bytes: 353 Cardinality: 1
55 NESTED LOOPS Cost: 174 Bytes: 349 Cardinality: 1
53 NESTED LOOPS Cost: 174 Bytes: 342 Cardinality: 1
50 NESTED LOOPS Cost: 173 Bytes: 336 Cardinality: 1
48 NESTED LOOPS Cost: 173 Bytes: 332 Cardinality: 1
46 FILTER
45 NESTED LOOPS OUTER Cost: 171 Bytes: 322 Cardinality: 1
43 NESTED LOOPS Cost: 169 Bytes: 305 Cardinality: 1
41 NESTED LOOPS Cost: 168 Bytes: 292 Cardinality: 1
38 NESTED LOOPS Cost: 166 Bytes: 277 Cardinality: 1
36 NESTED LOOPS Cost: 166 Bytes: 273 Cardinality: 1
33 NESTED LOOPS Cost: 165 Bytes: 256 Cardinality: 1
30 NESTED LOOPS Cost: 162 Bytes: 237 Cardinality: 1
27 NESTED LOOPS Cost: 161 Bytes: 203 Cardinality: 1
24 NESTED LOOPS Cost: 159 Bytes: 185 Cardinality: 1
22 NESTED LOOPS Cost: 158 Bytes: 163 Cardinality: 1
19 NESTED LOOPS Cost: 156 Bytes: 117 Cardinality: 1
16 NESTED LOOPS Cost: 90 Bytes: 95 Cardinality: 1
13 NESTED LOOPS Cost: 49 Bytes: 72 Cardinality: 1
10 NESTED LOOPS Cost: 8 Bytes: 41 Cardinality: 1
8 NESTED LOOPS Cost: 3 Bytes: 30 Cardinality: 1
5 NESTED LOOPS Cost: 2 Bytes: 22 Cardinality: 1
2 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
1 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
4 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
3 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
7 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_DEFAULT_CATEGORY_SETS Cost: 1 Bytes: 8 Cardinality: 1
6 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_DEFAULT_CATEGORY_SETS_U1 Cost: 0 Cardinality: 1
9 TABLE ACCESS FULL TABLE PO.PO_ASL_STATUSES Cost: 5 Bytes: 11 Cardinality: 1
12 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 93 Cardinality: 3
11 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
15 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 92 Cardinality: 4
14 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
18 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_ITEM_CATEGORIES Cost: 65 Bytes: 22 Cardinality: 1
17 INDEX RANGE SCAN INDEX INV.MTL_ITEM_CATEGORIES_N3 Cost: 2 Cardinality: 293
21 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 46 Cardinality: 1
20 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
23 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 1 Bytes: 22 Cardinality: 1
26 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_APPROVED_SUPPLIER_LIST Cost: 2 Bytes: 18 Cardinality: 1
25 INDEX RANGE SCAN INDEX PO.PO_APPROVED_SUPPLIER_LIST_N1 Cost: 1 Cardinality: 1
29 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_VENDORS Cost: 1 Bytes: 34 Cardinality: 1
28 INDEX UNIQUE SCAN INDEX (UNIQUE) PO.PO_VENDORS_U1 Cost: 0 Cardinality: 1
32 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_ITEM_COSTS Cost: 3 Bytes: 19 Cardinality: 1
31 INDEX RANGE SCAN INDEX (UNIQUE) BOM.CST_ITEM_COSTS_U1 Cost: 2 Cardinality: 1
35 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_COST_TYPES Cost: 1 Bytes: 17 Cardinality: 1
34 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Cardinality: 1
37 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Bytes: 4 Cardinality: 1
40 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 15 Cardinality: 1
39 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
42 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_TL_U1 Cost: 1 Bytes: 13 Cardinality: 1
44 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 2 Bytes: 17 Cardinality: 1
47 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 2 Bytes: 30 Cardinality: 3
49 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
52 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 1 Bytes: 6 Cardinality: 1
51 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ORGANIZATION_UNITS_PK Cost: 0 Cardinality: 1
54 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 7 Cardinality: 1
56 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
59 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 2 Bytes: 25 Cardinality: 1
58 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_INFORMATIO_FK2 Cost: 1 Cardinality: 1
62 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 1 Bytes: 26 Cardinality: 1
61 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_INFORMATIO_FK2 Cost: 1 Cardinality: 1
64 INDEX FULL SCAN INDEX (UNIQUE) GL.GL_SETS_OF_BOOKS_U2 Cost: 1 Bytes: 4 Cardinality: 1
66 INDEX RANGE SCAN INDEX (UNIQUE) APPLSYS.FND_LOOKUP_VALUES_U1 Cost: 2 Bytes: 36 Cardinality: 1
68 TABLE ACCESS FULL TABLE APPLSYS.FND_PRODUCT_GROUPS Cost: 5 Bytes: 2 Cardinality: 1
138 NESTED LOOPS Cost: 278 Bytes: 459 Cardinality: 1
136 NESTED LOOPS Cost: 277 Bytes: 449 Cardinality: 1
134 NESTED LOOPS Cost: 277 Bytes: 445 Cardinality: 1
132 NESTED LOOPS Cost: 277 Bytes: 441 Cardinality: 1
129 NESTED LOOPS Cost: 275 Bytes: 415 Cardinality: 1
127 NESTED LOOPS Cost: 275 Bytes: 408 Cardinality: 1
124 NESTED LOOPS Cost: 274 Bytes: 402 Cardinality: 1
122 NESTED LOOPS Cost: 273 Bytes: 398 Cardinality: 1
120 MERGE JOIN CARTESIAN Cost: 268 Bytes: 373 Cardinality: 1
117 FILTER
116 NESTED LOOPS OUTER Cost: 263 Bytes: 371 Cardinality: 1
114 NESTED LOOPS Cost: 261 Bytes: 354 Cardinality: 1
112 NESTED LOOPS OUTER Cost: 260 Bytes: 341 Cardinality: 1
110 NESTED LOOPS Cost: 258 Bytes: 305 Cardinality: 1
107 NESTED LOOPS Cost: 256 Bytes: 290 Cardinality: 1
105 NESTED LOOPS Cost: 256 Bytes: 286 Cardinality: 1
102 NESTED LOOPS Cost: 255 Bytes: 269 Cardinality: 1
99 NESTED LOOPS Cost: 252 Bytes: 250 Cardinality: 1
97 NESTED LOOPS Cost: 251 Bytes: 237 Cardinality: 1
95 NESTED LOOPS Cost: 250 Bytes: 215 Cardinality: 1
93 NESTED LOOPS Cost: 249 Bytes: 193 Cardinality: 1
90 NESTED LOOPS Cost: 245 Bytes: 294 Cardinality: 2
87 HASH JOIN Cost: 230 Bytes: 387 Cardinality: 3
85 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 92 Cardinality: 4
84 NESTED LOOPS Cost: 90 Bytes: 95 Cardinality: 1
82 NESTED LOOPS Cost: 49 Bytes: 72 Cardinality: 1
79 NESTED LOOPS Cost: 8 Bytes: 41 Cardinality: 1
77 NESTED LOOPS Cost: 3 Bytes: 30 Cardinality: 1
74 NESTED LOOPS Cost: 2 Bytes: 22 Cardinality: 1
71 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
70 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
73 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORY_SETS_B Cost: 1 Bytes: 11 Cardinality: 1
72 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_CATEGORY_SETS_B_U1 Cost: 0 Cardinality: 1
76 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_DEFAULT_CATEGORY_SETS Cost: 1 Bytes: 8 Cardinality: 1
75 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_DEFAULT_CATEGORY_SETS_U1 Cost: 0 Cardinality: 1
78 TABLE ACCESS FULL TABLE PO.PO_ASL_STATUSES Cost: 5 Bytes: 11 Cardinality: 1
81 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_CATEGORIES_B Cost: 41 Bytes: 93 Cardinality: 3
80 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
83 INDEX RANGE SCAN INDEX INV.MTL__CATEGORIES_B_N2 Cost: 3 Cardinality: 1,426
86 TABLE ACCESS FULL TABLE PO.PO_VENDORS Cost: 139 Bytes: 15,980 Cardinality: 470
89 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_APPROVED_SUPPLIER_LIST Cost: 13 Bytes: 18 Cardinality: 1
88 INDEX RANGE SCAN INDEX PO.PO_APPROVED_SUPPLIER_LIST_N3 Cost: 1 Cardinality: 64
92 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 46 Cardinality: 1
91 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
94 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 1 Bytes: 22 Cardinality: 1
96 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 1 Bytes: 22 Cardinality: 1
98 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_TL_U1 Cost: 1 Bytes: 13 Cardinality: 1
101 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_ITEM_COSTS Cost: 3 Bytes: 19 Cardinality: 1
100 INDEX RANGE SCAN INDEX (UNIQUE) BOM.CST_ITEM_COSTS_U1 Cost: 2 Cardinality: 1
104 TABLE ACCESS BY INDEX ROWID TABLE BOM.CST_COST_TYPES Cost: 1 Bytes: 17 Cardinality: 1
103 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Cardinality: 1
106 INDEX UNIQUE SCAN INDEX (UNIQUE) BOM.CST_COST_TYPES_U1 Cost: 0 Bytes: 4 Cardinality: 1
109 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_SYSTEM_ITEMS_B Cost: 2 Bytes: 15 Cardinality: 1
108 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Cardinality: 1
111 INDEX RANGE SCAN INDEX (UNIQUE) APPLSYS.FND_LOOKUP_VALUES_U1 Cost: 2 Bytes: 36 Cardinality: 1
113 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_TL_U1 Cost: 1 Bytes: 13 Cardinality: 1
115 INDEX RANGE SCAN INDEX (UNIQUE) INV.MTL_ITEM_CATEGORIES_U1 Cost: 2 Bytes: 17 Cardinality: 1
119 BUFFER SORT Cost: 266 Bytes: 2 Cardinality: 1
118 TABLE ACCESS FULL TABLE APPLSYS.FND_PRODUCT_GROUPS Cost: 5 Bytes: 2 Cardinality: 1
121 TABLE ACCESS FULL TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 5 Bytes: 25 Cardinality: 1
123 INDEX FULL SCAN INDEX (UNIQUE) GL.GL_SETS_OF_BOOKS_U2 Cost: 1 Bytes: 4 Cardinality: 1
126 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ALL_ORGANIZATION_UNITS Cost: 1 Bytes: 6 Cardinality: 1
125 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ORGANIZATION_UNITS_PK Cost: 0 Cardinality: 1
128 INDEX UNIQUE SCAN INDEX (UNIQUE) HR.HR_ALL_ORGANIZATION_UNTS_TL_PK Cost: 0 Bytes: 7 Cardinality: 1
131 TABLE ACCESS BY INDEX ROWID TABLE HR.HR_ORGANIZATION_INFORMATION Cost: 2 Bytes: 26 Cardinality: 1
130 INDEX RANGE SCAN INDEX HR.HR_ORGANIZATION_INFORMATIO_FK2 Cost: 1 Cardinality: 1
133 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
135 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_PARAMETERS_U1 Cost: 0 Bytes: 4 Cardinality: 1
137 INDEX UNIQUE SCAN INDEX (UNIQUE) INV.MTL_SYSTEM_ITEMS_B_U1 Cost: 1 Bytes: 10 Cardinality: 1
Regards,
Siva.Welcome to the forums !
Pl post details of OS, database and EBS versions.
Pl see these threads on how to post a tuning request -
HOW TO: Post a SQL statement tuning request - template posting
When your query takes too long ...
HTH
Srini -
I forgot my admin id and password some =body can help me?thanks
i forgot my admin id and password some =body can help me?thanks
see this thread
https://discussions.apple.com/thread/4940026?tstart=0
Forgot Your Account Password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password. -
Hello, I want to play my video files (which are on s3 bucket ) like live . Some buddy please help me
Hello, I want to play my video files (which are on s3 bucket ) like live .i.e.mox.tv i want play videos on my website.Some buddy please help me ..for that what i need to do?
my video are in mp4 formate with h.264 codecs
Message was edited by: lakhanp22Just as of late I noticed that Apple Stores are selling security cameras that work with their app on an iPhone. Very expensive but it uses both WiFi when local and cellular when not at home.
In your case I would check the apple store and see if there is a free or paid app to access your home closed circuit TV system. The cameras have to have their own ip address so you then need only enter that and access will be available to you. But they must be on your home network.
a lot of the higher end CCTV systems have a free app that can be used like the new Apple Security system.
Just Google it or check the store.
Good Luck -
Hi can some body please explain me how to open .vsd files in mac ?
Hi can some body please explain me how to open .vsd files in mac ?
.vsd is a format of Visio 2000, Visio 2003, Visio 2007, Visio 2010, now there are apps on Mac App store could open .vsd files quickly:
https://itunes.apple.com/us/app/visio-viewer/id673920933?mt=12 -
After I installed OS X Mountain Lion system, I can't use my Safari to log into my online banking and some other websites which require passwords. Can some one please help?
It could be browser incompatibility or something else. When you say you can't log in, what happens? Is the bank website generating an error saying you're not using a supported browser? Does the login form for your bank account display as usual, but once you submit the form to log in it doesn't work? Give me a specific step-by-step of what you're doing, such as...
1. I load bankofamerica.com
2. I type in my login
3. When I submit, the page does nothing
Obviously that may not be your issue, but giving us details like that will help us come to a quicker conclusion.
Maybe you are looking for
-
I've had trouble with this for quite a while now. Not sure what the issue is. I have an iPhone 6+ running the current software iOS 8.3 & when I try to post a Facebook status through Siri she responds with something along the lines of "I'm sorry. I ca
-
1)i wanted to know the structure of csv file, 2)how to read data from csv file .
-
Hi friends, I m using labview 8.6 version. I hve interfaced labview with cdaq 9172. I have used 9201, 9203 ,9219 card.Now i want to use 9264 card i.e analog output card.I am not getting how to use it .wheather I hve 2 use on function plate express--
-
I downloaded a version of Roboform and got unsupported browser messages. I tried to uninstall Roboform and apparently did, as no icon, application or system preference files remain. The toolbar remains and the messages persist. I had the whole system
-
Problems starting up in Illustrator CS2
Hi, I've been using Illustrator CS 2 for three years without any problems. Over the last few weeks I have been experiencing problems when starting up the application. The issue When I open the program it loads up as normal. At the start options scree