Some bugs / errors with subforms and id references

Hi!
Just hit another issue: when I put few subforms on the page, the performances of JDeveloper drop to snail running speed! Any keypress took 15 seconds. CPU was 50% (one core full, other not used – looks like JDev on Windows does not utilize dual core CPU fully). Restarting JDev resolved issue – next time same page responsiveness in JDev was OK. Looks like some memory leak or so happens when adding/removing subforms.
Also, I noticed problems with component id referencing with subforms (for PartialTriggers). Somehow, the JDev shows no error in component reference (and it looks correct according to specs) but in runtime the Trinidad displays warnings in message log.
Another, issue: the PopUp alignId attribute complains about referenced component id in JDev editor but works fine in runtime.
I don't know if these problems are already reported / resolved.
Regards,
PaKo

Perhaps said developers/maintainers are too busy preparing technical evidence for a major court case? ;-)
Besides, why are you still using Java? I thought Real Developers code in lolcode or (a +/b/+ favourite), brainfsck... :D

Similar Messages

Has anyone experienced Labview 8.2 crashing when attempting wire a cluster filled with object and task references?

I am getting a complete shutdown (crash) of Labview 8.2 when placing the wiring tool over a cluster that is filled with task and object references. The crash occurs on all computers I have attempted it on and happens throughout all VIs in all classes that distribute multiple references throughout the VI using a cluster. The entire project I am developing is programmed in GOOP. Has anyone experienced anything like this? I have provided a screen shot of the place where the crash is generated. Let me know if anyone has any insights.
B
Attachments:
LV screenshot.JPG ‏156 KB

There are several known crashes with LVClasses. One of the easiest
fixes is to load your application into memory and then hit
ctrl+shift+click on the Run arrow of your top-level VI. Then do
File>>Save All. You might also try selecting that wire (with the
selection tool -- use the Tools Palette to explicitly select a tool
other than wiring) and deleting it and then rewiring those terminals.

Aborting index build. Too many errors with finding and copying files ...

Hi dears,
I'm using UCM 11g.
I'm trying to start the automatic update cycle. When i start it, it gives me an error message just like :
Indexing aborted at :<time>. Aborting index build. Too many errors with finding and copying files to the appropriate place.+
Can anybody help me about this problem?
Helps will be appreciated.
Erdo
Edited by: erdo on 28.Mar.2013 11:11

Read this: error in Collection Rebuild Cycle
and maybe also UCM Indexer - Collection Rebuild Cycle errorring out

[SOLVED] errors with fdisk and cryptsetup; is my drive going bad?

I'm having issues with re-formatting an external hard drive using dm-crypt. It was previously formatted with TrueCrypt/NTFS, which I used as a shared backup drive between Windows and Arch. At some point, it stopped being able to mount, which I attributed to allowing Windows to "fix" it after improper dismount (e.g. a hard kill).
I decided to re-format with ext4 and only use it from Arch, but now I'm wondering if I may have a hardware issue with the drive. I've tried a lot more (like going through the full zero write after mounting the drive as a temporary dm-crypt device), but here's the condensed version to illustrate the problem.
system info
This is on a fresh boot. Just adding that as I've had issues with kernel modules after updating if a new kernel comes through. A fresh boot removes that potential issue.
$ uname -a
Linux arch_840 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64 GNU/Linux
$ lsmod | grep dm_
dm_crypt 28672 2
dm_mod 98304 5 dm_crypt
$ lsmod |grep xts
xts 16384 2 serpent_sse2_x86_64,twofish_x86_64_3way
gf128mul 16384 2 lrw,xts
smartctl status
Figured I should check the drive. There's a lot of old age and pre-fail warnings, but this post would seem to suggest I'm okay?
# smartctl -A /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.3-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 089 025 Pre-fail Always - 3330
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 703
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3707
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 104
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 734
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 053 000 Old_age Always - 24 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 104
225 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 214068
Disk info, delete existing partition, new MBR, create new partition
# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.26.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x76d37b6d
Device Boot Start End Sectors Size Id Type
/dev/sdb1 63 976768064 976768002 465.8G 83 Linux
Command (m for help): d
Selected partition 1
Partition 1 has been deleted.
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x2cd60f13.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-976773167, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-976773167, default 976773167):
Created a new partition 1 of type 'Linux' and of size 465.8 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
trying to format with cryptsetup
I had a bunch of custom options, but other Arch posts suggested just trying the default, which is what I've done here. It fails with the same error as when I try to pass a cipher, key size, etc. ("Command failed with code 5: IO error while encrypting keyslot.").
# truecrypt -v --debug luksFormat /dev/sdb1
bash: truecrypt: command not found
[root@arch_840 jwhendy]# cryptsetup -v --debug luksFormat /dev/sdb1
# cryptsetup 1.6.6 processing "cryptsetup -v --debug luksFormat /dev/sdb1"
# Running command luksFormat.
# Locking memory.
# Installing SIGINT/SIGTERM handler.
# Unblocking interruption on signal.
WARNING!
========
This will overwrite data on /dev/sdb1 irrevocably.
Are you sure? (Type uppercase yes): YES
# Allocating crypt device /dev/sdb1 context.
# Trying to open and read device /dev/sdb1.
# Initialising device-mapper backend library.
# Timeout set to 0 miliseconds.
# Iteration time set to 1000 miliseconds.
# Interactive passphrase entry requested.
Enter passphrase:
Verify passphrase:
# Formatting device /dev/sdb1 as type LUKS1.
# Crypto backend (gcrypt 1.6.3) initialized.
# Detected kernel Linux 4.0.3-1-ARCH x86_64.
# Topology: IO (512/0), offset = 0; Required alignment is 1048576 bytes.
# Checking if cipher aes-xts-plain64 is usable.
# Using userspace crypto wrapper to access keyslot area.
# Generating LUKS header version 1 using hash sha1, aes, xts-plain64, MK 32 bytes
# KDF pbkdf2, hash sha1: 996745 iterations per second.
# Data offset 4096, UUID 181fed4d-42f2-4f0f-8b70-cb7ba459e25f, digest iterations 121625
# Updating LUKS header of size 1024 on device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Reading LUKS header of size 1024 from device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Adding new keyslot -1 using volume key.
# Calculating data for key slot 0
# KDF pbkdf2, hash sha1: 1008246 iterations per second.
# Key slot 0 use 492307 password iterations.
# Using hash sha1 for AF in key slot 0, 4000 stripes
# Updating key slot 0 [0x1000] area.
# Using userspace crypto wrapper to access keyslot area.
IO error while encrypting keyslot.
# Releasing crypt device /dev/sdb1 context.
# Releasing device-mapper backend.
# Unlocking memory.
Command failed with code 5: IO error while encrypting keyslot.
Things also tend to hang with respect to the drive at this point. For example, fdisk -l spits out /dev/sda partitions immediately and then just hangs instead of printing out /dev/sdb info, then eventually quits (without ever writing it).
Any suggestions on where to look/how to troubleshoot? I found some possibly related posts, but nothing that looks promising:
- Impossible to crypt the drive using cryptsetup (fixed by rebooting)
- cryptsetup fails to open Udev cookie 0xd4d94f5 (semid 0) waiting for z (no responses; the hang after seems similar)
There's a couple odds and ends references to cryptsetup 1.6.6 having issues. I downloaded 1.6.4-1 and 1.6.5-1 and -2 from ARM to try, but wanted to post this in the meantime in case something stuck out.
Last edited by jwhendy (2015-05-29 16:01:40)

@qinohe I thought of that and the other day started formatting with mkfs.ext4; unfortunately, it was at work and I had to leave before I could let it finish. It had been chugging along a good few hours, and I was surprised it would take that long. I was able to format it with ext4 using Windows 7 (I dual boot) with the MiniTool Partition Wizard but I didn't use it like that before trying to solve the cryptsetup issue again.
This last time around, I was getting unresponsive behavior. I think I need to reboot each time I try something with cryptsetup, as any commands related to that drive seem to hang afterwards (fdisk, umount, eject, mkfs, or trying crypsetup again). Perhaps I'll just let it cook overnight with mkfs and see if I can at least have an unencrypted, but functional drive.
One interesting tidbit is that even though cryptsetup fails, when I've tried to issue mkfs afterward, it asks me to confirm that I want to format the disk since it has a LUKS header... so something appears to have been written. Is it possible the header is causing some issues? I don't know much about the structure of a disk (like what range the MBR resides in, what constitutes a header, etc.) but have been wondering if there's some way to start really, really clean with the disk. Like I'd just bought it -- something appears to be lingering around from previous efforts?
@frostschutz I'll check tomorrow. That's a good question. Just checked journalctl and here are some of the errors that appear; unfortunately, I wasn't watching so I can't tell you what matches up with what command:
May 23 09:32:22 arch_840 systemd-udevd[7784]: inotify_add_watch(7, /dev/sdb1, 10) failed: No such file or directory
May 23 09:32:22 arch_840 kernel: usb 3-4: stat urb: status -108
### there's lots like this; like 10 in a row with various sector values listed
May 23 09:32:19 arch_840 kernel: Buffer I/O error on dev sdb1, logical block 61341696, lost async page write
May 23 09:32:19 arch_840 kernel: blk_update_request: I/O error, dev sdb, sector 490735616
### there's also a bunch like this, from tab #0 -> #29 (not colored red, so not sure they're errors?)
May 23 09:32:19 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 1d 07 bc 10 00 04 00 00
May 23 09:32:18 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
I paged down quite a ways and those seem like the unique messages when I search the journal for "sdb". Anything stand out? I will say that the same sector numbers appeared in multiple blocks of the third error type listed, so that makes me wonder if something is genuinely wrong with the disk. I'll post the output of the full smartctl scan when I hopefully run it tomorrow.
Thanks for chiming in!

Working with strings and cell references

Hi all,
I'm a fairly new user to the Mac world but I'm a power user of Excel trying to moving into the number environment. I'm currently experiencing some very inconsistent behaviour working with text strings in Numbers.
I've used both '&' and CONCATENATE to try to concatenate strings and cell references and regualarly I'm getting the situation where the formula initially works and then when I save and reopen the file the cells containing the error return a syntax error.
Upon examining the formula it appears that the cell references are converted from cell references to simple text so & (b2) & becomes &b2&.
Any ideas what is causing this?

I apoligise for this tardy response. Firstly, the issue occurred not when I first create the formula but when I save, close and reopen the document.
Upon examining the formula, the cell reference is not being recognised and so instead of A2 referencing a cell it's simple A2 which causes an error.
And this is happening in more than one cell (whole rows of cells actually as I've often created a formula and copied it down 10 or 200 rows).
It is also happening on more than one file Badunit so I don't think it's a corrupt file.
It's more than a little annoying though as it means every few days when I go back in to a file I need to spend a few minutes recreating the formulas.
Any other suggestions?
Oh and I've tried both methods of formula creation of typing the reference and clicking, but the result is the same.
Message was edited by: Un-decided

ORA-06502: PL/SQL error with dimensions and roles

Hi everyone,
When executing a mapping that loads a cube we are always getting that ORA-06502: PL/SQL error character string buffer too small
The cube contains a number of dimensions, some of them with roles. We've checked that the error appears when we use two different lookup operators to fill dimension atributtes in the cube and its correspondent role. If we map dimension attributes with lookup operator, and the role attributes with constants, the mapping executes without any error. Moreover, even thought it doesnt make any sense, if we map the role dimension attributes with a lookup operator linked to a different dimension, it works too.
We think that this could be due to attributes names, maybe they are too long, but we have tried to make them shorter and still getting the same error.
Any ideas of what could be happening?
Thank you so much in advance.

The return datatype in a PLSQL function is unconstrained. Which means it does not have a size.
The size is declared on the receiving end.
What size variable are you trying to return your value into?
Here is an example...
SQL>create or replace function my_func
2 return varchar2
3 is
4 begin
5    return USER;
6 end;
7 /
Function created.
SQL>declare
2    my_string varchar2(30);
3 begin
4    my_string := my_func;
5 end;
6 /
PL/SQL procedure successfully completed.
SQL>declare
2    my_string varchar2(3);
3 begin
4    my_string := my_func;
5 end;
6 /
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 4

Audio error with garageband and external usb audio interface

I am using Garageband 2.0.3. under ios 8.0.2 on my iPad 3 and via camera adapter a USB audio interface Focusrite Scarlett 2i4 or a Presonus iTwo.
When I start Garageband, it works well, the audio interfaces are recognized and I can record a track.
As soon as I switch from instrumtent to track view, the audio path is completely disturbed and all I can hear is some noise from the speaker.
Then I have to unplug the usb cable and plug it in again. Then audio works until I switch back to the instrument menu.
When I use the headphone output only there is no problem with Garageband and everything works fine.
Other applications audio applications don't show any error with each of the two audio interfaces.
Any feedback is very much appreciated, thanks.
Harald

I have this exact issue. However, I tried the Loopy app after after GB crashed and received an error message saying that core audio is not available. Rebooting resolves but the problem repeats. Any suggestions as to fixes? Btw; I have no such problem with Ipad 2 and ios 7.

IWeb 09 - Bug Report with album and html fragment

I create an album with iPhoto and I insert it in a existent album page.
Publish the site in a local directory.
Navigate the page from the local directory and the page works.
Publish the site using Cyberduck FTP and navigate the page from the www
Results, the album doesn't work, only text in page.
Here the link of the page that I create with iWeb08 (work)
http://www.newsisters.it/ita/Album2009/Album2009.html
and here link of the page that I create with iWeb09 (doesn't work)
http://www.newsisters.it/ita/Album2009_error/Album2009.html
in this page at the left bottom I insert an HTML code for Counter Statistic from Shinystat,
it works using iWeb08 and doesn't work using iWeb09.
The code is

<script type="text/javascript" language="JavaScript" src="http://codice.shinystat.com/cgi-bin/getcod.cgi?USER=newsisters"></script>
<noscript>
</noscript>

Help me Please!
Thanks a lot

See: Some songs don't don't show under artist on my iPod.
From what I understand, once you add a second album name for that artist even for a single song, ALL the rest of the songs should now show up under that artist, even those without album names.

[Partially Solved] Error with bsdtar and symbolic links

I'm trying to install a package (asymptote) from AUR but am running into an odd error. During the extract phase I get errors like
asymptote-1.70/base/asy-keywords.el: Can't update time for asymptote-1.70/base/asy-keywords.el: Function not implemented
bsdtar: Error exit delayed from previous errors.
I found a post that may help: http://bbs.archlinux.org/viewtopic.php?id=50750. Do I really have to do this?
By the way, I too am running on a Linode (Xen virtualization).
Thanks,
Luis
Last edited by banbh (2009-05-24 00:22:13)

I have not got to the bottom of my problems with bsdtar and symlinks. I suspect it must have something to do with either my configuration (derived from the Arch image provided by Linode) or running under virtualisation.
However, others might find my work-around useful, so I document it below.
I downloaded asymptote from AUR using wget ("wget http://aur.archlinux.org/packages/asymptote/asymptote.tar.gz"), unpacked it, then patched the PKGBUILD
$ diff -u PKGBUILD.orig PKGBUILD
--- PKGBUILD.orig 2009-05-23 17:58:47.000000000 -0400
+++ PKGBUILD 2009-05-23 18:00:49.000000000 -0400
@@ -11,9 +11,12 @@
'used if present at compile time: freeglut, gsl, fftw')
source=(http://downloads.sourceforge.net/sourceforge/asymptote/$pkgname-$pkgver.src.tgz)
md5sums=('1ded335bc63b662a6eb920a4c065706c')
+noextract=($pkgname-$pkgver.src.tgz)
build() {
- cd $srcdir/$pkgname-$pkgver
+ cd $srcdir
+ tar xzf $pkgname-$pkgver.src.tgz
+ cd $pkgname-$pkgver
./configure --enable-gc=/usr --prefix=/usr \
--with-latex=/usr/share/texmf/tex/latex || return 1
make asy || return 1
After that I simply did a "makepkg" followed by "sudo pacman -U asymptote-1.73-1-i686.pkg.tar.gz"

Error with calculations and printing output

Been a few months since I did any kind of java programming and cannot seem to figure out what is wrong with my program. It gives me an error with rentalCost when it goes to printout the value, does not seem calculate the values, and does not print any of the things I call for at the end. Maybe I need a seperate class or the if/else statements are wrong. The point of the program is for fun, but is to calculate the cost for a cabin based on certain coniditions the user inputs. Any help would be much appreciated. NOTE: There are no comments yet due to I put them in after I finish the program.
import java.util.Scanner;
public class Test
     public static void main (String [] args)
          String season, cabinGrade;
          double rentalCost, days, finalCost;
          Scanner input = new Scanner(System.in);
          System.out.print("What season will you be staying during? ");
          season = input.nextLine();
          System.out.print("What kind of cabin? ");
          cabinGrade = input.nextLine();
          System.out.print("How many days are you staying? ");
          days = input.nextDouble();
          input.close();
          if (season == "pre-season" && cabinGrade == "regular" && (days < 7))
               rentalCost = ((days * 55) * .9) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = ((300 + (days * 55)) * .9) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "regular" && (days < 7))
               rentalCost = ((days * 55) * .75) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = ((300 + (days * 55)) * .75) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "luxury" && (days < 7))
               rentalCost = ((days * 100) * .85) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "luxury" && (days >= 7))
               { days = days -7;
                 rentalCost = ((600 + (days * 100)) * .85) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "luxury" && (days < 7))
                    rentalCost = ((days * 100) * .75) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "luxury" && (days >= 7))
               { days = days -7;
                 rentalCost = ((600 + (days * 100)) * .75) * 1.0925;
          else if(season == "prime" && cabinGrade == "regular" && (days < 7))
               rentalCost = (days * 55) * 1.0925;
          else if(season == "prime" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = (300 + (days * 55)) * 1.0925;
          else if(season == "prime" && cabinGrade == "luxury" && (days < 7))
               rentalCost = (days * 100) * 1.0925;
          else if(season == "prime" && cabinGrade == "luxury" && (days >= 7))
               { days = days - 7;
                 rentalCost = (600 + (days * 100)) * 1.0925;
          System.out.println("Season : " + season);
          System.out.println("Cabin grade: " + cabinGrade);
          System.out.println("No. of days: " + days);
          System.out.println("Rental cost: " + rentalCost);
}

Lgndryhr wrote:
Been a few months since I did any kind of java programming and cannot seem to figure out what is wrong with my program. Maybe I need a seperate class or the if/else statements are wrong. The point of the program is for fun, but is to calculate the cost for a cabin based on certain coniditions the user inputs. Any help would be much appreciated. NOTE: There are no comments yet due to I put them in after I finish the program.
At the very least you need to tell us what you expected this code to do and what it actually did...

Dynamic Forms with Subforms and Text Fields

I've been reading all of the messages relating to subforms and dynamic forms and have used many of the suggestions, but haven't found anything that addresses the problem I am having. I'm using Designer 7.0. I've saved my form as a dynamic form, I've set my text fields for multiple lines and expand to fit. My problem is that as soon as I set the parent subform to Flow Content, everything moves to the left margin. I've tried grouping items together within a subform in hopes that the items will maintain their position on the page, but everything always moves to the left margin. I'm creating a legal form that needs to have text and a text field centered at the top of the page. Below that to the left is a text field that needs to be able to expand with two text fields to the right of it. Below that are additional text fields that need to expand as needed.
Am "stacking" my subforms incorrectly and setting the wrong subform to Flow Content? Or, can you now lock a field to a specific position? Any help would be greatly appreciated.

Unfortunately, I hadn't understood that you needed the fields to expand in height and everything below them to move down the page. In that case, you'll need to use flowed subforms.
Having all objects move to the left side of the page is expected when setting a subform to flowed. That's because the flow is top-down, left-right.
One thing you could try is making the text field that needs to be centered exactly as wide as the flowed subform and then setting its left- and right-hand margins to an equal number. This would ensure an equal amount of space on the left- and right-hand sides and because the field would be as wide as its flowed container (subform), entering multiple lines of text would result in everything below moving down.
I've attached a sample form where the page subform has been set to flowed, the text field at the top is a multi-line/height-expandable text field with its width set to the page width and its left- and right-hand margins both set to 2in and the button and check box objects are pushed below the text field.
When text is entered into the text field, it expands in height and causes the button and check box to move down.
To achieve other horizontal and vertical positioning/offsets, you could play with the margins of all the fields that need this.
Stefan
Adobe Systems

Some encoded files with subtitle and other are not

I just encoded a few videos files with Nokia Video Manager. and all files b4 encoding are with subtitles(*.smi) in one same folder. I played encoded files and some results are with subtitles. (I didn't set up the video manager program to inserted the subtitles into final encoded files. also there is no option I can make insert subtitles in). and rest of files are not with subtitles. now I wanna make all files with subtitles. how make all files with subtitles?

Short answer is I don't know.
The way I get files with Subtitles is by Ripping the DVD with ImTOO DVD ripper, in the selections I select the audio track and Subtitle from the DVD to be used during the encoding. Then the resulting video has the subtitles built in.
I can't get Nokia Video Manager to work reliably for me so I don't use it.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Constant & erratic "Page Load Error" with Safari and Firefox

A week or two ago, I started getting constant "Page Load Errors" ('this page cannot be found', etc) when browsing with either Safari or Firefox. These are not dead sites that time out, but are very live (and cannot be summoned no matter how many times refresh)!
Something is wrong on my computer's end: I have strong wireless, have tried connecting with ethernet, and have used a different network. All of these produce the same result, where about half of the sites I try to connect to are instantly declared as dead by any browser I use.
I am not using any firewall, and have emptied both browser's caches.
Any ideas would be greatly appreciated.
Thanks!
Cliff

I'm having the same problem. It only happens at home over my DSL connection. Here is what I have tried and the results.
This really started bothering me since I upgraded to a recent Macbook Pro. I tried my original MBP with Leopard and found it doing the same thing. I ended up testing from my G4 and it works fine. The problem occurs over wireless and wired. I tried changing my MTU size with no change. I thought it was DNS but changed to other DNS and it didn't make a difference. Happens in Safari and Firefox. I am thinking it has an effect on iTune store also. The problem goes away when I VPN in to work, comes back when I close the VPN.
Just tonight I installed an clean 10.5 Leopard on my original MBP. Safari works perfectly. Instead of updating to 10.5.6, I download the 10.5.5 update. After updating the problem reappeared.
Again, my G4 with latest Tiger update work fine and both Macbook Pros with the latest Leopard have a problem over my DLS connection. They work perfectly fine at work and other locations.
Ted

Weird error with division and float

I'm trying to write a program (which is due tomorrow) which draws an ellipse with horizontal and vertical radii input by the user. Now, for whatever reason, when I divide two numbers and put the answer in a double, it disregards the decimal (so when the answer is less than one, it gives me 0.0)
Why is it doing that and what can I do to fix it?

Heh. I actually figured that out before you posted,
but thanks for the response.Most had that figured out before you even made your original posting so don't be too cocky now -:)

Rendering errors with firefox and chromium SPECIFIC to Arch LInux

Guys - can someone please browse to https://www.americanexpress.com and click on "User ID" using whatever browser? For me under both Firefox and Chromium, there is some sort of rendering error that prevents me from doing so. In the screenshot you can see how there is a "phantom menu" that appears above the login dialog:
I booted into a live ubuntu 11.10 CD and tried from there using firefox - no such error. Now I'm asking myself if this is somehow related to Arch and if so which package should I use in a bug report... thanks for the interest.
EDIT: x86_64 and nvidia drivers.
EDIT2: x86_64 and nouveau have the same result.
Last edited by graysky (2012-01-02 13:37:03)

Hi,
I see errors too on www.youtube.com/charts after enter some text in the search box, the page dont render correctly.
This is happening in both 32 and 64 bit Arch with firefox 9.0.1 and Nvidia, chromium render is fine.
If someone need some more info, please tell me , I dont know where to start.
Firefox on ubuntu render correctly.

Some bugs / errors with subforms and id references

Similar Messages

Maybe you are looking for