Some, but not all, albums not displayed after Yosemite/iPhoto 9.6 upgrade

After upgrading to Yosemite and iPhoto 9.6, photos from some, but not all, albums are missing. All albums from the previous version are listed in the Library, but 12 of 15 are showing "(0)" with no contents.
Is recovery possible?
iMac 21.5in (late 2009), OS X 10.10.2
3.06 GHz Intel Core 2 Duo
4 GB Ram
OS X 10.10.2
iPhoto 9.6 (910.29)

Your best solution is to restore a backup copy of the library made just prior to the Yosemite and iPhoto upgrades.
Otherwise try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.

Similar Messages

System preferences will not open after Yosemite 10.10.2 upgrade

system preferences will not open after Yosemite 10.10.2 upgrade. What should I do?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Some photos not displaying keywords in iPhoto

For some reason some of my images don't display the keywords assigned to them in iPhoto 08. As a new Mac user I am in the process of migrating my substantial image gallery from my Windows machine. Over the last few years I have spent considerable time tagging my photos in Lightroom and Expressions Media. These keywords are recognized by all other applications and also when getting the file's properties from the Finder.
The strange part is that within a particular batch of pictures (all of which had the keywords applied in the same way...I think) some images have keywords in iPhoto, but some don't.
Your help would be most appreciated.
Thanks,
Juan Sosa

Hi Terence,
On the 3rd attempt and 1.5 days, iPhoto Library Manager rebuilt the library (first time crashed after a few minutes, second time 2/3rds of the way through).
When the process finished, there was a message from iPhoto Library Manager saying it couldn't copy an image over and that there were some errors (I saved the log file if that helps).
I've just opened it up, and unfortunately I appear to still be missing images (the photo library is 29,692 vs. previously 29,692). When I do 'Get Info' on the folder within the iPhoto database package (i.e. the Masters folder), it shows around 33,000 files - I assume that these are all image files, so it would seem I'm missing about 3,300 images when I open iPhoto?
Is there any additional steps that I can take? Or given that I made a copy of the Masters folder elsewhere, should I perhaps just try importing these? I assume that iPhoto will use the existing folder structure to mark events, etc... I can live without the album info (I hadn't tagged photos or anything else).
Thanks.

Main viewer window not displaying after Yosemite upgrade

I just upgraded tp Yosemite. Also upgraded Aperture (v3.6). Opened up Aperture. After it finished upgrading my library I noted that thumbnail images on viewer display OK but there is no image showing on the large viewer. Tried selecting different thumbnails. No success. Tried quitting and restart app. Nothing. Any ideas?

Thanks. I tried all three of the repair options but no success. However, after restart things started working correctly. Possibly it was the combination of repairs and restart that fixed it.

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

Printer just started feeding a blank page after some, but not all printed documents

Printer just started feeding a blank page after some, but not all printed documents

Hi @cam21 ,
I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
What application are you printing from?
It may be a setting in the application.
Does this happen from all applications?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs

ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs. Setting up the connection has been a hit and miss. Have tried both x86 and x64. Any ideas? Use ODBC from the control panel and C:\Windows\SysWOW64 same results. Using
SQLexpress 2008r2
Thanks

Hello,
Please consider to configure Windows Firewall or disable it. Not only Windows Firewall but any security software.
https://msdn.microsoft.com/en-us/library/cc646023(v=sql.120).aspx
Windows Firewall is enabled by default.
Make sure you are using SQL Server Native Client to create the ODBC DSN. Not all Windows versions have it, so you may need to download and install it.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

TS1424 Some but not all of my purchases from iTunes store (TV shows) have been downloading in a Quicktime format that can't be viewed via iTunes or on apple TV (1st gen). I get error message when I try to convert.

Since I have a new iMac and now use Mountain Lion, I am observing that TV shows purchased in iTunes sometimes download in a Quicktime format that will not open in iTunes. In some but not all cases, I right click "open in" and select iTunes and then it will play. However, this doesn't always work. When I open in Quicktime and try to export to iTunes, that won't work. When I try Wundershare's Video conversation program, it won't even accept the file. What's going on here? Any ideas? Please reply [email protected] with any suggestions.
Kathy

Thanks for the help Ricky.
I did put my iPod into DFU and iTunes recognized it in restore mode. After restore I am back where I was before - iTunes cannot connect because of an unknown error.
I have installed Jailbreak to see if I can bypass itunes but haven't succeeded. I can't get my computer to recopgnize the iPod as a device.
I'll take it to a Genius bar next time I am in the area of one. Until then I'll probably continue to try hacks to get it connected.
Dan

Finder shows some but not all files in a folder

In some circumstances, Finder only shows some (but not all) of the files in a folder. Why?
I notice this with Excel autosave files in the Office 2011 Autorecovery folder (Macintosh HD ▸ Users ▸ Conor ▸ Library ▸ Application Support ▸ Microsoft ▸ Office ▸ Office 2011 AutoRecovery). In my case, Finder shows 34 files but "ls" in a Terminal window reports 40 files. The missing files do not start with a period (.) and have the same permissions as other files that show in Finder (-rw-r--r--@ 1 <myname> staff). Here's the last four lines of "ls -al" - the first two appear in Finder, but not the last two:
-rw-r--r--@ 1 myname staff    55296 8 Oct 2013 Word Work File D_1239425731.tmp
-rw-r--r--@ 1 myname staff    55296 8 Oct 2013 Word Work File D_1240072173.tmp
-rw-r--r--@ 1 myname staff    52796 13 Feb 11:08 safe1.xlk
-rw-r--r--@ 1 myname staff    95320 12 Mar 16:06 safe2.xlk
I have tried copying files from this folder to another folder, and/or changing their names. They still do not appear in Finder, nor are they visible in the File Open dialog of applications, even when the dialog is listing other files in that directory - but if I manually type the name into the File Open dialog, the app manages to find and open the file.
If I Spotlight-search for the file name, or search in Finder, without specifying that specific directory ("This Mac"), the file is not found, but if I direct the Finder search at that particular directory, then the search returns the relevant files.
So: why does Finder hide certain files when showing a folder, even though it can find and show those files if you specifically ask for them?
Now using OSX 10.10 (Yosemite), but I'm pretty sure I noticed this on OSX 10.8 as well.

So simple - thanks. I'd not been aware of the hidden flag, and now I've found the -O option on ls to display it.
Follow-on question: I now see that you can change the system-wide defaults to display hidden files with this...
     defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder
...but is there a way to specify this on a per folder basis? I'm happy enough to hide hidden files in general, but it would be nice if I could set an attribute/flag/whatever on the Office AutoRecovery directory that told Finder "in this folder, always display hidden files". Can I do this?

Aperture has stopped showing some, but not all, keywords on photos

I imported some new photos today and noticed that Aperture seems to have stopped displaying some, but not all, of my keywords. I'm noticing this on a large number of my existing photos.
For example, I've selected a photo and the Keywords tab of the Metadata pane lists: Amanda, iPhoto Original, Judy, and Zoo. That appears to be correct. However, the Keywords field in the top of the Metadata pane only shows iPhoto Original, and the only keyword displayed in the grid view is iPhoto Original.
Switching to a different metadata display does not help, nor does rebuilding the library. Reassigning the keywords seems to help, but that's not really an option for > 7,000 photos.
Anyone know why this is happening? Can I fix this?
Dave
PowerMac Dual G5 2.0 Mac OS X (10.4.7) Aperture 1.1.2

After poking around with BBEdit in my Aperture library, I think I see the problem. I chose a photo that Aperture won't display all the keywords and re-added them. I then compared all the files in the library for that photo with the same files in a backup library I had set aside.
It appears that at some point Aperture got the IPTC keywords out of sync with the actual keywords on the photos. Looking at the Version-1.apversion file (which is actually a .plist file), I can see that both copies have the same keywords on them (called tags in the plist), but the IPTCProperties.keywords summary does not reflect all the tags actually on the photo. Aperture appears to just display the keywords stored in the IPTC keyword summary instead of checking to see what keywords the photo actually has.
So, the keywords are still there, but the summary that Aperture displays is wrong and a library rebuild doesn't appear to rebuild the keyword summary.
My options at this point appear to be either re-apply all my keywords or write a tool to fix it for me (I guess being a developer has it's perks). I'll definitely be filing a bug on this...

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

I reinstalled my computer's operating system. How do I transfer music from my Ipod to my music library? It transfered some, but not all my music. I authorized the computer, but it did not help.

I reinstalled my computer's operating system. How do I transfer music from my Ipod to my music library? It transfered some, but not all my music. I authorized the computer, but it did not help.

The sync is one way - computer to ipod. The only exception is itunes purchases.
The ipod is not a backup device.
You need to copy everything back using your backup copy.

The send button is greyed out when I try to text some but not all people from my iPod touch. Any ideas how I can fix this?

The send buttin is greyed out when I try to text some but not all people from my iPod Touch. This happens even when they have iPhone 4s. Any ideas why and how I can fix this?

This issue can be caused by the McAfee SiteAdvisor extension.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

I create trigger but not display massage after insert in oracle 10g

I create trigger but not display massage after insert in oracle 10g
**CREATE OR REPLACE TRIGGER TableName**
**AFTER INSERT OR DELETE OR UPDATE ON test**
**BEGIN**
**if inserting then**
**dbms_output.put('Message');**
**end if;**
**END;**

What user interface are you using?
If the tool doesn't support the SQL*Plus syntax (set serveroutput on), it probably has an option somewhere to enable DBMS Output. Not even knowing what tool you're using, it's impossible for us to guess where that option might be configured.
As others have suggested, using DBMS Output to test code is less than ideal because you're dependent on the application you're using to display it to you and not every application can or will do that. If you want to use DBMS_Output, you may need to switch to a different GUI (SQL Developer or SQL*Plus are both free utilities from Oracle). Otherwise, you'd probably be better off having the trigger do something that you can subsequently query (i.e. write a row to a log table).
Justin

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

Some, but not all, albums not displayed after Yosemite/iPhoto 9.6 upgrade

Similar Messages

Maybe you are looking for