Some buttons not usable

Some of my buttons on my ceyboard are not usable as you can see. Started a few months ago and getteen worse. Why would some of my buttons not worc and how can thys be changed. Started just one button not wor>ceen and now 5 or 6 buttons not worceeng

Hi, if you dn't have another KB to try...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
Reboot, test again.

Similar Messages

  • BB Curve slow to react and some buttons not working

    This are my Blackberry Curve 8520 specs:
    Signal: -65dBm
    Battery: 100%
    File Free: 106342756 Bytes
    V5.0.0.681 (bundle 1168, Platform 5.2.0.67)
    Carrier: TIGO
    Apps installed:
    Dropbox
    Bible
    Evernote
    Free Chat for Facebook
    Google Maps
    Google Sync
    Handylogs Money
    iLock 2.1
    Laterdude
    Memory Booster
    Multialarm
    Navita Translator
    Role Call Reminders Lite
    Now my problem:
    My blackberry fall directly faced down, the blackberry turn off. Then I pressed the restart button and nothing. so I remove the battery and then put it back again. The BB started, but It got hang up at the screen you could see the little clock working but never start properly so I pull off the battery again and waited like 5 minutes then I put it back.
    Now my BB starts but when I left it idle and some sms arrives or call or simply if I want to use it, I have to maintain pressed any button like 7 seconds if not my BB doesnt react.  I can press repetedly buttons to make it work but nothing works and the only way to make it work is maintain any button pressed.
    After that BB works normally!, but now the "del" button doesnt work, I tried to remove the battery several times but every time gets the same result.
    I made a hard reset twice and restored my contacts only, then I tried to make the BB work normally and guess what........ nothing!!!!!!!
    so I have those two Big problems
    Please anyone with a great idea? or any recomendation to get this thing working again!!!

    I am not using "Clear Recent History". I have read about the session data, as you mentioned it when others had this issue. However, I'm not sure what I'm suppose to do with that. Does it mean the App Tab isn't working as promoted? I got the impression they should load with my Home Page every time I start Firefox and that's what I wanted. I don't want it to load every tab I had open during my last session FireFox. Just the App Tabs and Home Page. That's how it's described in the "What is App Tab" page.
    If I select When starting FireFox... "Load Home Page & Last Session Tabs", it works, but it also loads all the other junk I have open. I don't want all of that to load every time I start, but I also don't want to have to repin all those tabs every time I start. That's annoying. I tried selecting "Use Current Pages" as my Home Page, when I had it set exactly as I wanted it, but it opened all my App Tabs as App Tabs and regular tabs, along with my Home Page. Not quite what I had in mind.
    Am I just misunderstanding how it works? What's the point if you can't just keep the App Tabs and Home page on start up and not all the other junk you have open on close?
    Thanks for answering so quickly!

  • Published muse website on server , some buttons not working

    I have published a test of a webpage using the trial of adobe muse .
    http://www.viajesviatamundo.com
    On internet explorer all works ok , on the rest of the browsers , safari , firefox , ...
    The first 4 countries buttons of each continent not
    working ?????
    What is this , related to the trial version , related to a bug of muse , related to what ....
    Thanks

    Hello Sam ,
    I have installed version 3.1 , exported , and all the same . The first four buttons countries of each continent , dont go . Too the facebook , twitter buttons dont go .
    On internet explorer all goes perfectly ok , on the rest of the browsers the problem happens .
    Im using Windows XP x64 , last versions of browsers , and too i have proved on a Imac safari and firefox , same problem too . Some of the links dont go .
    regards
    jose

  • URGENT: Interactive PDF some buttons not working

    Hey,
    I am having a big problem with interactive PDFs at the moment, evrything has been working perfectly until this morning it decides to go pear shaped - the day before the PDF is needed at a show tomorrow. I have made many interactive PDFs so I know what I am doing but this time I have tried everything and still not getting it to work.
    The document is a 61 page, sectioned PDF with a mixture of buttons - go to destination and also next/previous page.
    The next/previous page buttons work fine, but the go to bookmark buttons will not work anymore!
    I have re-built all the buttons and bookmarks, but still having this problem. This was all running perfect for the last 2 weeks but now it won't work.
    Any ideas?
    Details:
    2013 27" iMac on Mountain Lion
    Creative Cloud CS6 (Indesign and Acrobat Pro)
    Edit: Exporting to SWF works just fine

    SOLVED
    The problem was the document source name, has to match the document you are using. I was saving 3 x different files for 3 different purposes, and the bookmarks were getting confused.
    Yay

  • Some buttons not working

    In settings-> Display-> select wallpaper button is not working(need to goto pictures to change wallpaper)
    In settings-> Notifications->Cutomization->contacts->customize for contact button is not working(need to goto contacts to customize anything)
    help me regarding these issues.

    Do a simple reboot on the BlackBerry in this manner:
    Restart: Press and hold the upper edge power button about 20-30 seconds, ignore the 3-2-1 timer and hold until the screen goes black and you see the red LED.
    Now, after the reboot is complete, give it a few minutes and allow all the data syncing to subside and try again.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Some buttons on the right hand screen of my ipod are not working please help me!! what do i do, some buttons on the right hand screen of my ipod are not working please help me!! what do i do

    some buttons on the right hand of my ipod touch screen are not working? could somebody help me i have reset restored and everything has this happened to anyone else?

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • My ipad Home button is some time not working

    my ipad Home button is some time not working

    Try here >  iPad: Not responding or does not turn on
    Apple - Support - iPad - Hardware Service

  • I purchased I phone 5 from USA covered under Apple care  . I'm in India now. Wake/sleep button not working. Apple care here have refused to replace or repair it though it is still under international warranty. Feeling harassed. Can some one help.

    I purchased I phone 5 from USA covered under Apple care  . I'm in India now. Wake/sleep button not working. Apple care here have refused to replace or repair it though it is still under international warranty. Feeling harassed. Can some one help.

    Is there an "APPLE STORE" in India or you just went in a reseller store?
    There is a replacement program for sleep/wake button for free. Just look for an Apple Store and make a reservation at Genius Bar.
    I have an iPhone 5, bought in Dubai U.A.E.
    It is a US model (model A1428) which is different of the model use here in Italy/Europe
    My serial number is qualified for battery replacement program.
    I thought the Apple Store wouldn't repair my phone because I bought it from another country , a different model and it is already out of warranty.
    The Apple store's staff just checked if my iPhone's serial number is eligible for the program and he replaced the battery for free today.

  • I'm running Safari 6.0.5 - Mac OS 10.8.4 -- when I load my gmail the block around the DELETE and MOVE tabs are not usable - press buttons but nothing happens. ???

    I'm running Safari 6.0.5 - Mac OS 10.8.4 -- when I load my gmail the block around the DELETE and MOVE tabs are not usable - press buttons but nothing happens. ???
    I can see the block (flashes) and the buttons are no longer usable.
    I have Empted Cache but doesn't seem to help.

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • I using mozilla firefox so long times but it just get problem today because i can't type in english words but i can type in thai and some buttons is not english but it's other alphbets that i can't read and it's happening with yahoo and friendster and not

    I using mozilla firefox so long times but it just get problem today because i can't type in english words but i can type in thai and some buttons is not english but it's other alphbets that i can't read and it's happening with yahoo and friendster and not sure for other website
    == today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Same problem with the mouse, but with the mouse I can leave the cursor in place in the text field and move to the keyboard to type. As long as the cursor is in the field it stays editable.
    The problem with the pen is it's in my hand all of the time. I just flip it up under my thumb against my palm to type. So, as soon as I move the pen, the field goes away and I can't type in it. Hoping this is making sense.
    My tablet does have the touch function too, and I just found out I can use my finger to tap in the text field, then type. I guess that'll be my solution since I prefer not to leave a mouse set up on this iMac.
    I'm thinking now that this is just a problem with the pen itself, and nothing to do with iPhoto. So glad to have this figured out! I really like iPhoto '11! So much easier for me, a simple P&S gal, than Aperture 3. I use iPhoto Library Manager too and love it!
    Thanks so much! Debbie

  • Clicks / Taps not registering well on some buttons.

    I am having an issue with some of my buttons not registering clicks when running on the iPhone. They work fine in the AIR debugger.
    Does transparency matter? The buttons are PNG files of the text "OK" and "CANCEL" with transparent backgrounds. I was thinking that maybe the iPhone wasn't registering clicks on the transparent areas therefore making the buttons harder to hit.
    Any ideas?

    Two things:
    From testing, I've notice that some time the mouse click events did not fire, especially in fast rate clicks (say, in games like bejeweled).
    Switching from "mouse click" to "mouse down" events seems to work better.
    You can always separate the graphics from the "hit" area of the button. you can:
    a. use an almost transparent movieclip (alpha of 1/100) that is placed above the graphics (and listen to its event, not the graphics).
    b. use a simple button and place a large rectangle in the "hit" state of the button.
    btw, using method 2b, you can have one graphic file for all the UI, as it's just a background for the real buttons.

  • CS6 is not working perfectly after installing Mountain Lion. Some buttons don't interact!!!

    Some mouse or wacom functionality is from time to time not active when I click on some buttons. Does anyone reconize this problem. And knows what to do.

    My agenda also goes crazy. If I open an invition in Mail a totally wrong appointment (from 2 years ago) opens....I also receive calls from people who receive all kind of weird invitations from me (with "inifinite loops")....
    W.T.F. is happening? Anybody the same problems?

  • The send button is greyed out when I try to text some but not all people from my iPod touch. Any ideas how I can fix this?

    The send buttin is greyed out when I try to text some but not all people from my iPod Touch. This happens even when they have iPhone 4s. Any ideas why and how I can fix this?

    This issue can be caused by the McAfee SiteAdvisor extension.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Iphone 4 volume buttons not working

    iphone 4 volume and mute buttons not working, checked all settings they are all fine and when headphones in it works??? When I take out headphones the volum buttons do not work, when phone rings or text receives only vibrates???? HELP!!!!

    This could be due to some debris or dirt inside the  headphones jack that makes the iPhone think that the headphones are connected even when they are not.
    Try to see if you can clean the jack being very careful, with canned air as sold in electronics store.  Some people have been successful by introducing and withdrawing the headphones jack several times in a row to displace whatever is in there if it is lodged in.
    Avoid introducing anything else like a pointed object.  You could damage the jack.
    If all of this does not work, I would try first resetting the phone by holding the home button and the power button together for about 15 seconds or until the whilte apple appears, then waiting until the phone resets.  If the problem continues after this, take it to an Apple Store to see what they believe should be done.

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

Maybe you are looking for