Some calls rejected

my iPhone 4s is rejecting some land line calls. It is not consistent for some go through, but for others they receive a message stating that this phone does not accept incoming calls. I have no blocked numbers. I have reset the phone to factory specs and it still continues.

I'd check with your carrier to make sure you don't have some sort of blocking service enabled on your account.

Similar Messages

  • IPhone 5 32GB echo voice during 3rd party call reject

    Dear all,
    Have anyone experience echoing voice especially for iPhone 32GB during 3rd party call reject? (Doesn't happen to 16GB and 64GB)
    During phone call if the other party rejects the call, you could hear echo background voice right after the busy tone.
    Appreciate if someone could share some joy in solving this very annoying problem. Have tried restoring and setting up as new phone both with negative result. Currently running 6.1.3.
    Best regards,
    MW

    Having the same issue with a 4S

  • Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.

    Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.

    Please report via Apple Feedback. These are user forums. You aren't speaking to Apple here.

  • Whan some calls me i can see only number, but i have that contact in my iphone. Use, iphone 3g 4.2.1

    whan some calls me i can see only number, but i have that contact in my iphone. Use, iphone 3g 4.2.1
    If anyone knows what to du, please write me!
    TNX

    No.
    You cannot.  Facebook has made their app only compatible with ios 4,3 or higher.
    Your iphone can only go to 4.2.1
    Sorry

  • Call reject with sms is it coming with 7.8???

    Guyes,
    is the call reject option with text message is coming with 7.8 update? And finally does any one know if the update will be released this month in Europe?
    Thank's!

    No, it's not in WP7.8
    The Portico update for WP8 does have this feature however
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Call Rejected error when Using CTI Port to call out

    Hello,
    I am using Cisco Call Recording feature that is enabled on a phone that has a CTI Port and number assigned to invoke a call recording session to dial out a Long Distance number. I used JTAPI tool to invoke a call and then used the CTI that was invoked by the BIB to dial a long distance number. The call leaves the phone and gets to the gateway (MGCP) with 2 T1 Pri's and in the debug I see this error:
    KNOW Good call:
    001679: *Sep 20 14:39:53.005: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8  callref = 0x5069
            Bearer Capability i = 0x8090A2
                    Standard = CCITT
                    Transfer Capability = Speech
                    Transfer Mode = Circuit
                    Transfer Rate = 64 kbit/s
            Channel ID i = 0xA18395
                    Preferred, Channel 21
            Facility i = 0x9F8B0100A1080201010201008400
                    Protocol Profile =  Networking Extensions
                    0xA1080201010201008400
                    Component = Invoke component
                            Invoke Id = 1
                            Operation = CallingName
                                    Name not available
            Calling Party Number i = 0x0080, 'XXXXXXXXX'
                    Plan:Unknown, Type:Unknown
            Called Party Number i = 0x80, 'XXXXXXXXXX'
                    Plan:Unknown, Type:Unknown
    001680: *Sep 20 14:39:53.009: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8  callref = 0xD069
            Cause i = 0x8081 - Unallocated/unassigned number
    001681: *Sep 20 14:39:53.097: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8  callref = 0x506A
    FAILED Call:
    001685: *Sep 20 14:39:56.509: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callref = 0x1DA8
            Bearer Capability i = 0x8090A2
                    Standard = CCITT
                    Transfer Capability = Speech
                    Transfer Mode = Circuit
                    Transfer Rate = 64 kbit/s
            Channel ID i = 0xA98384
                    Exclusive, Channel 4
            Calling Party Number i = 0x0183, '2678'
                    Plan:ISDN, Type:Unknown
            Called Party Number i = 0x80, 'XXXXXXXXXXX'
                    Plan:Unknown, Type:Unknown
    001686: *Sep 20 14:39:56.537: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8  callref = 0x9DA8
            Channel ID i = 0xA98384
                    Exclusive, Channel 4
    001687: *Sep 20 14:39:56.557: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8  callref = 0x9DA8
            Cause i = 0x8295 - Call rejected
    001688: *Sep 20 14:39:56.585: ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8  callref = 0x1DA8
    001689: *Sep 20 14:39:56.593: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x9DA8
    001690: *Sep 20 14:40:07.001: ISDN Se0/0/1:23 Q931: RX <- SETUP pd = 8  callref = 0x4200
    Anyhelp appreciated.

    Hi,
    I have looked into the issue. If you are trying to create the BP with general role 000000, i think it might not be possible via LSMW.
    The error message is correct, because role 000000 is indeed not relevant for update because if you can see in the customising Tx BUSD, 'FLAG - Do not update' will be active. This is the reason why you are getting the error message of 'No update is defined for the role 000000'.
    When you insert a partner in role "000000 General Business Partner",the error message "BP role cannot be updated" will be returned. This error message is very specific for this issue. You can create BP in different roles apart from the general role.
    Indeed if you try to change the 'Do not update' flag to inactive state and process the LSMW project you will be able to create the BP but it is strictly not recommended.
    This role is a technical role which exists for the creation of BP, and immediately you will fall back to other roles available for the partner.
    So i feel you need to change the role before you create BP with this role via LSMW.
    I hope this helps.
    Regards,
    Venkat

  • How to make call reject?

    I have CallManager 4.2 and I want to make call reject functionality when the phone is on-hook and ringing. There is only answear and iDivert softkeys in this mode. It is possible to make iDivert to invalid number but I'm looking for more elegant solution.
    Thanks

    Are you using H.323 to the GW ?
    If so it could be possible to idevert to a service that disconnects the call and does not actually answer or give busy tone. Howeve depending on the network, that may have the same effect to the caller.

  • I need auto call reject how can make it in iphone 4s. 6.0.1

    I need auto call reject in iphone 4s 6.0.1

    Call blocking is not a feature that is available on the phone. You'd need to contact your carrier to see what services they offer.
    You can quickly silence the ringer for calls you don't intend to answer by tapping the power button once. Tapping it twice will send a call directly to voice mail.

  • Unable to receive some calls on new iPhone 6 Plu

    I get ringtone but screen remains black or if it is switched on I have no way to answer call.  This only happens with some calls, (maybe from Apple) and there is no record in the call log.
    What can I do? 
    I have tried Apple support for callback but it seems they ring on the mobile and not my home number as they state on their case log.

    Hi redisthecolour,
    I understand that you have a black screen, but it seems like your iPhone is still on and working. You may have accidentally turned on Screen Curtain, which is an Accessibility feature in your iPhone:
    Turn the screen curtain on or off.  Triple-tap with three fingers. When the screen curtain is on, the screen contents are active even though the display is turned off.
    Use iPhone with VoiceOver - iPhone
    http://help.apple.com/iphone/8/#/iph3e2e2329
    If this does not resolve the issue, you may want to follow the suggestions in this article:
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/HT203039
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • My call reject can't work in iPhone 5

    Hi,
    My call reject can't work in iPhone 5..!! I can't even c the icon( to swap up) when incoming call.

    I am/was having the exact same problem.  I would be in a call and my phone would "beep" like there was an incoming call but no option to ignore or swap nor does it display who is calling.  I would continue to hear the "beep" until the caller either hung up or went to voice mail.
    The secondary problem was this....  if they didn't leave a VM, my phone does not even show a missed call therefore I have no way of knowing who it was that was calling.
    So I turned my phone off and back on.  Now I have the options to ignore or swap the call.  However, now what happens is if I am in a call and I hit the ignore button, I continue to hear the "beep" like the call is incoming and the caller does not get sent to my voice mail!!!!!!
    Very frustrating.  This all just started happening for me 2 days ago.
    Oh and p.s.  I still haven't upgraded to iOS 7.

  • Hi, after updating my iphone since 2 weeks back now i am facing a battery problem i charce fully my iphone and by the end of the day my iphone shuts down it needs to be charged again and if i didi some calles it leaks after few hours. Please adivse me.

    Hi, after updating my iphone since 2 weeks back now i am facing a battery problem i charce fully my iphone and by the end of the day my iphone shuts down it needs to be charged again and if i didi some calles it leaks after few hours. Please adivse me what to do.

    I final piece for me in the jigsaw following on from this
    http://www.care4pcs.co.uk/2012/10/how-to-be-happy-gmail-user-on-iphone-or.html 
    is to turn off wifi when you do not need it. When I leave the house I turn off wifi, because the majority of the times when my iPhone has got very hot and crashed is when I am away from home. I suspect that if the iPhone is in the vicinity of public wifi (wheather secure or not secure) it will try and connect, even if you have 'automatically join known networks' set to off. This is easy of course if you have an unlimited data contract for your iPhone. I may be wrong, but it is working for me. It makes sense for me because it is another way of reducing the work the processor (and battery) has to do and therefore reduces the chance of overheating.
    Having said that, I never had this problem with my iPhone 4. I now have a 4S.
    Try it. Hope it works for you.

  • Why do some calls show -- from today

    Some calls from today only show -- ... all of yesterday show what location they came in from?!?!

    If you're referring to the Destination column on the usage logs not always showing the information ... it's the same response as the text logs, i.e., a reporting lag.
    Re: Why hasnt messagesm text or calls updated for today?

  • ISDN call rejecting due to unknown reason

    Hai all
    I am trying to connect two sites using
    ISDN.But the call is getting rejected.
    The "debug isdn q931" message gives
    " Cause i = 0x8095 - Call rejected "
    The code 95 indicates call rejected due to unknown reason.Does anybody knows the
    solution to solve this problem.
    Regds
    Sudeesh

    Sir
    The IOS of RtrA is c1700-k9sv3y-mz.122-13.bin
    And the show isdn status is
    grvisdn1#sh isdn stat
    Global ISDN Switchtype = basic-net3
    ISDN BRI0 interface
    dsl 0, interface ISDN Switchtype = basic-net3
    Layer 1 Status:
    ACTIVE
    Layer 2 Status:
    TEI = 103, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    Layer 3 Status:
    1 Active Layer 3 Call(s)
    CCB:callid=6, sapi=0, ces=1, B-chan=2, calltype=DATA
    Active dsl 0 CCBs = 1
    The Free Channel Mask: 0x80000001
    Total Allocated ISDN CCBs = 1
    At present I can't send the remote site IOS and sh isdn stat since no access to remote site.I tried the remote site with two different routers.
    Initially 800 and now 1700 .Not able to connect
    with both routers.
    regds

  • Problem for receive some call

    some call was not processing by the GW ( h323).
    We have this trace during problem:
    Sep 5 08:44:02.640: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x2076
    Sending Complete
    Bearer Capability i = 0x8090A3
    Standard = CCITT
    Transfer Capability = Speech
    Transfer Mode = Circuit
    Transfer Rate = 64 kbit/s
    Channel ID i = 0xA98383
    Exclusive, Channel 3
    Called Party Number i = 0x81, '4256'
    Plan:ISDN, Type:Unknown
    Sep 5 08:44:02.648: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xA076
    Channel ID i = 0xA98383
    Exclusive, Channel 3
    Sep 5 08:44:22.701: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x2076
    Cause i = 0x87EF - Protocol error; unspecified
    Sep 5 08:44:22.705: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xA076
    Do you have mode detail about cause i = 0x87EF ??
    in this trace, we do not have " Calling Party nu?ber", is it a problem ???
    please found in attach the configuration ?
    thanks for your help

    Hi thanks for this update.
    We have two sites (A and B) manage with the same callmanger. The callmanger was located on site A.
    When we make this call, we have the problem => phone (site A) -- GW--- PSTN --- GW ---phone (site B).
    When we try to joint the site B from another site or whit mobile phone, all is OK.
    We have only the problem when site A calls site B. No problem when the site B calls the site A.
    This problem can be like to the provider or configuration of GW???
    Regards
    Sebastien

  • Call Reject OR Blacklist Software for Sony Ericsson ELM

    is there exist a software for call reject or blacklisting for use by the sony ericsson ELM Phone?
    Where can i Buy or Download this Software?
    Solved!
    Go to Solution.

    No such software as far as I know, but you can always ask your mobile network to blacklist certain numbers.Otherwise, you can go to: Settings--Calls--Manage calls--Accept calls--Only from list: Here you can create a list of accepted numbers excluding the ones you don't want.

Maybe you are looking for