Some charges apply even when i have world unlimite...
I have the trial of the pack world unlimited but have some charges discounting from my credit when i call a mobile phone in Argentina.
Is the pack not working well?
Please give me some support in the page there are no option for support, only this comunity.
Pablo
ActiveX is part of the Windows operating system. Plus the ActiveX version of Adobe Flash is for Internet Explorer. Other browsers need their own version of Flash' Firefox needs the Plugin version of Flash.
If you go to the Adobe website to download Flash while using Firefox, Adobe will provide the correct version of Flash automatically. Just make sure you de-select any other programs that Adobe may want to stick you with before you actually download Flash. Then close Firefox and run the Adobe Flash installer.
Similar Messages
-
Charges for call even when i have world unlimited
I have the trial of the pack world unlimited but have some charges discounting from my credit when i call a mobile phone in Argentina. Is the pack not working well? Please give me some support in the page there are no option for support, only this comunity. Pablo
I would take out of airplane mode also and just disable Cellular Data AND Data Roaming under Settings - General - Cellular.
This way you would still be able to receive texts, your phone # will register to the network and you will still be able to connect to wifi. I traveled to Ireland last year and this worked fine for me. -
My iPod shows that my battery is receiving energy and that it is "charging," but it doesn't actually charge. The battery never increases; it only decreases. Even when I have it physically plugged in and charging, it loses battery whenever I am using an APP or anything. I'm thinking that the chip that receives the energy is damaged or worn out. Is there anyway to fix it without going to the store? My USB chords is fine. It charges other iPods fine. Including a second generation iPod which means my 4th generation iPod should not have an physical battery problem. Any suggestions? Thank you so much!
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It is normal for me to plug it in overnight and to see no charge whatsoever the next day. I have never had so much trouble using a friggin charger in my life. It just seems to be exceedingly finicky. What am I missing?
Charging your iPad should not be problematic. It should be an easy thing to do using the charger provided with your iPad connected to a known good wall outlet.
The charging problem you are experiencing is most like caused by:
1. A faulty charger
2. A faulty cable
3. A bad wall outlet
4. A problem in the iPad.
The first three of these are easiest to eliminate. Try a for ends charger and cable. Make absolutely sure your outlet is good. Try other outlets.
If the charger, cable and outlet a proven to be good then the problem lies in the iPad.
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
Even when i have updated version of adobe flash player, some sites do not play video
Hi,
Even when i have updated version of adobe flash player and active x from adobe.com, some sites do not play the video. A request box, install the plug in comes. When i click it, it again tries to install the same version of adobe, which i have already downloaded. it is only for some sites.
May be it is because, it is site problem? How to overcome itActiveX is part of the Windows operating system. Plus the ActiveX version of Adobe Flash is for Internet Explorer. Other browsers need their own version of Flash' Firefox needs the Plugin version of Flash.
If you go to the Adobe website to download Flash while using Firefox, Adobe will provide the correct version of Flash automatically. Just make sure you de-select any other programs that Adobe may want to stick you with before you actually download Flash. Then close Firefox and run the Adobe Flash installer. -
Everytime I put my iphone5 on charge now matter where I am and even when I have signal it always drops the signal and continues to have no signal until I take it off charge. I have the up to date software on it and everything and is relatively new. Is anyone else having this problem and how do I fix it?
This is a user to user support forum. We are all iphone users just like you.
You are not addressing Apple here at all.
This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
"it's too fragile"
No it is not. i have never damaged one, nor has anyone I know.
" U loose data when Ur phone is locked"
No you don't. Why do you think this?
"and there is no customer support!!! "
Wrong yet again. Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
"but I will go back with Blackberry "
Please do.
Good ridance -
WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred order, it will still displace them occasionally. This is becoming increasingly frustrating!
Is this a "Pages" issue or "FInder"? The vast majority of documents I use are in Pages, but there are also Numbers, PDFs, jpegs and a few other applications involved. This never happened before I upgraded to Mountain Lion; in Tiger, the documents (mostly Appleworks) and files stayed where I wanted them to be.
I am visually oriented, and prefer to arrange items in a folder in an order that makes them easier for me to access, which is often NOT alphabetical.
Can anyone suggest a solution? Please??
Thank you.
Saranbar,
Thank you for your reply.
However, I do not understand what you mean by "user account." I am the only user, and can find no options for "user" or "guest." The parental controls have always been off, as there are no other people who have access to my computer.
Frank,
Thank you for your reply.
All my documents, files and folders are in icon view, Arranged By: none in both view and view options. This arbitrary rearranging does not happen all the time, only when I make a substantial change to one of the documents in the file or folder. I'm not sure what you mean by "column heading."
MichaelLAX,
Thank you for your reply.
I know, to my sorrow, that Appleworks does not work with Mountain Lion. I spent at least three months converting approximately 2,000 Appleworks documents to Pages, Numbers, Bento (for databases) and Touchdraw (for drawings). So this is not the problem; but as I said, I did not have this rearranging problem with Appleworks - the icons stayed where I wanted them to be. I still miss the ease and reliability of Appleworks, darn it!
Frank,
Thank you for your second reply.
I do have the Sort By: in view options as well as in view set to "none." The finder still insists on rearranging, but only when I have made a substantial change to a document in that file or folder.
Any futher thoughts?
xdab,
Thank you for your reply.
"Are you are using icon view, but for some reason the finder moves files around? is that the problem?"
YES!! This is exactly the problem.
"If this operation is successful then erase the original and rename the new one to the name originally chosen by the user."
This seems like a lot of trouble, especially as I often work on several documents at the same time.
"By the way, the finder has a "clean up by" menu that rearranges icons in one of the standard orders, there are shortcuts that produce the same effect, for example <option><cmd>1 sorts them by name. Is it possible that this shortcut was typed by mistake without you noticing?"
I do know about this "clean up by" option, and avoid it like the plague! So I doubt this is the issue, and I infrequently use keyboard shortcuts like this anyway.
Thanks all who replied. None of the suggestions seem to work, however. Any others out there?
Regards,
Sara -
Nokia E72 voice mail icon shows even when I have n...
I have a new Nokia E72 UK edition and am with Orange UK network.
The voice mail notification icon in my E72 always shows in the bottom right of the screen even when I have no voice mail, and have deleted all the messages. This is really annoying, especially as for a while it worked fine.
I tried disabling voice mail notifications, switching the phone on and off, then enabling them again but still no joy.This is quite a common problem on orange UK. It's actually oranges fault.
Some of the following things have been known to clear the fault:
Placing the sim into another non-orange unlocked phone, then checking the voicemail. When put back into the orange phone the icon has gone.
Calling customer services and requesting an over-the-air sim update, this nearly always solves it.
Calling or visiting an orange store and getting the sim card replaced.
Message Edited by psychomania on 12-Jan-2010 02:18 PM -
My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?
My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?
Do you have a cellular plan with data and SMS activated?
-
Latest Software of iOS 7.0.3 Wont install even when I have deleted all applications.I don't want to buy more memory as I have already done.
What model iPad and what iOS version is it currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
Sometimes when I open Calendar, it is blank even when I have entered appointments. What must I do?
Sometimes when I open Calendar, it is blank even when I have entered appointments. When this happens, I tap calendars and tap hide all calendars and then tap show all calendars and mt appointments appear. How do I get the Calendar app to show my appointments without going through this extra step? Thanks
Close All Open Apps... Perform a Reset... Try again...
Reset
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Why can´t I use inport VI in win xp even when I have used userport aplication?
why can´t I use inport VI in win xp even when I have used userport aplication for enabling port reading in this plattform?, I´m getting data from the parallel port in epp mode, my pc´s pararell is ok bcs I can read data in c++
If you have an older LabVIEW (6.1 or earlier) you will need to exchange the in port and out port VIs that came with LabVIEW with different ones and install a DLL. The reason is documented here . This link (which is the first link returned when you search ni.com for "in port") explains basically that the OS won't let you until you have kernel level access. The devzone link at the bottom of the refered page will include all of the code that you need to install (VIs and DLL) to make it work.
>
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected] -
I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?
Plug it into power for at least 15 minutes. If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant rendering means its almost impossible to edit anything. Please help.
H TheGamer
What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
I am not approving or disapproving of this project feature, just commenting on the what is.
This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Please consider.
ATR
Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time. -
My MacPro shuts down even when I have 50% battery power?
My MacPro shuts down even when I have 50% battery power?
My MacPro shuts down even when I have 50% battery power?
Maybe you are looking for
-
Hi all when i run my request using XML Report Publisher .request completes without error. but when i see the output it shows me a message dialogue box saying File does not degin with '%PDF-' though my template is of rtf type. any idea pls help
-
Trouble properly connecting Shuffle to PC
We use Windows Vista Home Premium, iTunes v8.0.1 My son has iPod Shuffle. He once had registered this Shuffle on PC1 but since PC1 is not longer being used, his Shuffle is now used on PC2. Whenever we connect Shuffle to PC2 and try to open up his iTu
-
New Customers x 3 days. Decided to return to Verizon for cell phone service with advent of Network extenders as had good luck with ATT micro cell ( same premise ) through our DSL. We have been trying to get it to work for 48 hours and still no go
-
How can i take off itunes 11???
How can I down grade from Itunes 11???? <Edited By Host>
-
Creating non-update tablespace
Hello! Is there a way to create an oracle tablespace that does not allow data to be updated, but only insert and delete? I would think it should be possible for datawarehouse-applications, where valid data are essential and not subject for updates. B