Some clients won't NetBoot

I am running 10.4.11 on an XServe and have a whole lab of eMacs that I need to NetBoot so that they can be imaged. I'm not having any problems NetBooting newer eMacs, but my older 700Mhz eMacs start to NetBoot get to the spinning globe then kernel panic. Intel macs are NetBooting fine as well. I have a Universal NetInstall image that I've used many times. Here is the log file from the server when I try to NetBoot one of the older eMacs:
Aug 6 14:53:38 Xserve bootpd[277]: BSDP DISCOVER [en0] 1,0:3:93:94:55:14 NetBoot052 arch=ppc sysid=PowerMac4,4
Aug 6 14:53:38 Xserve bootpd[277]: BSDP OFFER sent [1,0:3:93:94:55:14] pktsize 374
Aug 6 14:53:38 Xserve bootpd[277]: DHCP DISCOVER [en0]: 1,0:3:93:94:55:14
Aug 6 14:53:42 Xserve bootpd[277]: DHCP REQUEST [en0]: 1,0:12:d9:ed:e0:64 <SEP0012D9EDE064>
Aug 6 14:53:43 Xserve bootpd[277]: BSDP INFORM [en0] 1,0:3:93:94:55:14 NetBoot052 arch=ppc sysid=PowerMac4,4
Aug 6 14:53:43 Xserve bootpd[277]: NetBoot: [1,0:3:93:94:55:14] BSDP ACK[LIST] sent 10.11.21.88 pktsize 300
Aug 6 14:53:43 Xserve bootpd[277]: DHCP INFORM [en0]: 1,0:3:93:94:55:14
Aug 6 14:53:43 Xserve bootpd[277]: ACK sent <no hostname> 10.11.21.88 pktsize 300
Aug 6 14:53:43 Xserve bootpd[277]: BSDP INFORM [en0] 1,0:3:93:94:55:14 NetBoot052 arch=ppc sysid=PowerMac4,4
Aug 6 14:53:43 Xserve bootpd[277]: NetBoot: [1,0:3:93:94:55:14] BSDP ACK[SELECT] sent 10.11.21.88 pktsize 377
Aug 6 14:53:43 Xserve bootpd[277]: DHCP INFORM [en0]: 1,0:3:93:94:55:14
Aug 6 14:53:43 Xserve bootpd[277]: ACK sent <no hostname> 10.11.21.88 pktsize 300
I can post more information if necessary!

Similar Messages

Old clients won't switch from Self-Signed Certs to PKI.

Greetings.
I am wondering if anyone can give me advise on problem I am having with some of my sccm clients.
When I originally deployed SCCM i used self signed certs on clients.
We needed to add MAC and Linux support and MAC clients won't work without PKI, so I following this http://technet.microsoft.com/en-us/library/gg682023.aspx to configure Certificate Authority.
It all seemed work well, I can now join MAC client with auto-enroll and all machines are requesting client certificates and I had couple of machine with new push on windows site installed with PKI.
So right now I have about 250 windows clients, only 22 of them use PKI and the rest keeps using self-signed certs.
I foolishly switched main site settings, MP settings and DP point settings to use https only.
As a result I lost all self-signed clients and have full log for mpcontrol saying that it's rejecting clients cause they certificate cannot be validated.
I logged in to couple of those machines and MMC i can see that it did enroll machine with valid Client Cert but Configuration Manager client itself still saying that it's using self signed one.
Am I missing a step that I need to do to make sure that all those clients switch to PKI?

It is. but how can i redeploy them?
I was under impression auto push won't reinstall them. If i do deployment - that seem to reuse existing configuration and still use self signed on old machines.
How can i verify that it does push clients to machine that already have it correctly and start using new config and not reuse old one.
I even tried removing clients from couple of machines and see if it gets pushed again on them with proper config and those machines don't seem to get client but used to get it fine before. I keep getting new machines being added to domain and they get client
pushed to them, but anything that had client with self signed doesn't seem to be happy.

Some of the albums in the Beatles package I downloaded from itunes will not sync with my iPhone 5. Some songs won't play. They did sync to my iPad and they all play on my iPad. What can I do? I've already deleted all songs from the iPhone and re-synced.

I downloaded the entire Beatles collection from iTunes in 2011. Some songs skip and won't play. Some albums won't sync to the phone but they sync to my iPad. I've deleted the entire music library from my iPhone, shut the phone down, turned the phone on and synced again to add the music but now 2 albums won't even sync (Rubber Soul and Revolver). I've tried dragging the songs to the iPhone, no luck. Any thoughts?

Sounds like you may need to re-download the entire albums from iTunes. See this KB article for how to download past purchases: http://support.apple.com/kb/HT2519.
I'd suggest doing it one album at a time. Delete one, download it from your purchase histor, then the next, etc.

Report in PDF format and email it to some clients, using Database Trigger

Hi
Is it possible to run a report in PDF format ad email it to some clients after a specific event through Database Trigger. For example whenever a client makes an entry into order entry table (through entry form), a trigger should execute on Orders table, this trigger should execute or generate a PDF formatted report and finally mail it to Sales team?
I have
ORAS 10g(10.1.2.0.2)
utl_mail configured.

In Reportsconfig.properties file the http port is 7778,
now the output is like this...
SQL> /
* WELCOME TO EVENT-BASED-REPORTING API *
* API-Version : 9i *
* (C) Oracle Corporation, 2000 - 2002 *
* Debugging turned ON **************************
*** Length of Paramlist : 1
OK : Parameter added : GATEWAY=http://myserver.com:7778/reports/rwservlet
*** Length of Paramlist : 2
OK : Parameter added : SERVER=rep_myserver_oracleas2
*** Length of Paramlist : 3
OK : Parameter added : REPORT=D:\Reports\emp.rdf
*** Length of Paramlist : 4
OK : Parameter added : USERID=abc/xyz@mydb
*** Length of Paramlist : 5
OK : Parameter added : DESTYPE=mail
*** Length of Paramlist : 6
OK : Parameter added : DESFORMAT=PDF
*** Length of Paramlist : 7
OK : Parameter added : [email protected]
Starting run_report: building url
*** Building URL (RUN_REPORT)
OK : URL built :
http://myserver.com:7778/reports/rwservlet?SERVER=rep_myserver_oracleas2&REPO
RT=D%3A%CReports%5Cemp.rdf&USERID=abc%2Fxyz%40mydb&DESTYPE=mail&D
ESFORMAT=PDF&DESNAME=khan.emran84%40gmail.com&statusformat=xml
*** Submitting HTTP Request
*** using URL
:http://myserver.com:7778/reports/rwservlet?SERVER=rep_myserver_oracleas2&REP
ORT=D%3A%5CReports%5Cemp.rdf&USERID=abc%2Fxyz%40mydb&DESTYPE=mail&
DESFORMAT=PDF&DESNAME=khan.emran84%40gmail.com&statusformat=xml
OK : Request submitted - Return stream : <?xml version = '1.0' encoding =
'ISO-8859-1' standalone = 'yes'?>
<serverQueues>
<error code="50159"
component="REP" message="Executed successfully but there were some errors when
distribute the output"/>
<
OK : Request submitted - Length of stream : 229
*** XML-Parsed - Following Structure discovered :
*** Checking elements!
serverQueues ()
*** Checking attributes!
error
*** Checking attributes!
__code = 50159
__component = REP
__message = Executed successfully but there were some errors when distribute the
output
*** Finished Parsing XML
Getting value for element: job
Getting value for element: error
*** Requesting value for Attribute error.component [REP]
Getting value for element: error
*** Requesting value for Attribute error.code [50159]
Getting value for element: error
*** Requesting value for Attribute error.message [Executed successfully but
there were some errors when distribute the output]
REP-50159:Executed successfully but there were some errors when distribute the
output
declare
ERROR at line 1:
ORA-20999:
ORA-06512: at "NRSP.SRW", line 264
ORA-06512: at "NRSP.SRW", line 799
ORA-06512: at line 15

I downloaded ios7 and now some apps won't open even after resetting them. Don't won't to lose my info by deleting them and starting over. What to do?

I downloaded ios7 and now some apps won't open even after resetting don't won't to lose my info by deleting and starting over.. What to do?

Try close all inactive apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe up on the screenshot of the app you want to exit.
3. The app will fly off the screen

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

Can no longer open two Firefox tabs, have close using Task Bar/Processes. Some links won't activate on websites. As per support suggestion,have backed up profile, deleted existing profile, removed firefox and replaced thingsetc

Can no longer open two Firefox tabs at the same time. Will disappear from screen but won't close - have to go to Task Bar/ Processes to close it, some links won't activate on websites. As suggested in the support area I have gone through the process of backing up my profile, deleted existing profile, removed firefox from computer, reinstalled profile in fresh folder, reinstalled firefox 6. I have done this twice for no effect - may work as it used to for a while (30mins) then gets back to its old tricks.
It is a bit irritating.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Group Policy not work in some client machine.

Hello All,
Existing environment is AD 2012. gpupdate /force command does not working in some client machine. And it's occur randomly. Error shown about 15-20% of client machine. Please suggest. Hopefully this time get reply from community.
The Error:
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller
has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.

Thanks for your reply. basically this error occurs with in same location as well as branch location. i have check event log in AD but not got any specific error. AD health status is ok. AD to AD synchronization also working well. All the client machine running
on windows 7 64 bit and few of them are windows 8.
Please suggest. if you need any event log for analysis i can send you.
Thanks
I recommend you examine the event logs upon an affected client machine. Specifically, look for the surrounding events on that machine (both System, and Application logs), for the hours previous and the hour after.
The time period may vary according to your environment (e.g. what is expected/normal for your environment, your configured GP refresh cycle-time).
e.g., are there network drops, or power drops, or system crashes, restarts at the similar time.
if it's a laptop, is it wireless? Was there a transition from wireless to wired operation?
Is there VPN in use?
If you are able to compare with another machine (I would encourage that), to understand what "normal" looks like in the logs, so that you have some kind of baseline data for comparison.
Other checks, maybe confirm that the machines are updating as required (have the relevant WindowsUpdates etc), and consider if some security/protection/firewall software might be interfering with normal Windows operations.
Also the potential for malware or virus, which can disturb many basic services (ensure a scan is performed and returns clean).
If you have the opportunity for an affected user to contact you urgently when the symptom occurs, check that the gpt.ini file is accessible from their PC.
e.g.: \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini
This file is hosted within the replicated SYSVOL share on your DC's, so check that it is accessible.
You might also validate the particular GPO this refers to, and check each of your DC's holds the correct copy of the files for that GPO GUID.
If you open that GPO, and perform a minor change to it (e.g. add a comment), then click Apply, OK, this should cause the GPO contents to replicate an updated version (be cautious, depending upon the nature of that GPO !!!)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

After upgrading to Mavericks, some websites won't load (using wifi)?

Hey guys,
I upgraded my Macbook Pro to Mavericks last December. I had some problems when loading some websites (such as eBay, Society6, etc) while I was at home using my home wifi in Indonesia. It's like, sometimes these websites won't load, but sometimes they do.
I've tried different browsers and it's still the same. I thought, it was just the wifi at my home in Indonesia that's problematic, because at work (using cable), the internet's just fine. But THEN, I am now here in Australia, I don't usually have problems with my aprtment's wifi at all, but now it's doing that thing. Some websites won't load properly or won't load at all. I realized that this is most likely has something to do with my laptop (ie. upgrading to Mavericks. I've never had this problem before), because the wifi works just fine with my smartphone and my iPod.
Has anyone encountered similar problem? How do you fix this?
Thanks so much,
S

Hello sharlegit
Try creating a new network location and test to see if the same thing happens of certain websites not working.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Regards,
-Norm G.

Some apps won't open after OS X Mavericks update

After the update to OS X Mavericks, some apps won't open on my macbook pro. That include things like preview, boot camp assistant, from what I've tried so far. When I click on those from applications menu or from the spotlight search, the icon appear on the dock very briefly(like 1 sec) and nothing happened after that. Based on the internet search, I tried the Disk permissions repair and didn't work. Any suggestions? Thanks

Hi aung.24,
Thanks for using Apple Support Communities. I would recommend trying the troubleshooting for "If the issue occurs in various applications, or in Mac OS X" from this article:
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Cheers,
- Ari

Some windows won't display?

For some reason, some of my windows in dreamweaver will not display correctly, or much at all. For instance, when you first open dreamweaver and select "new dreamweaver site" all I get is a window that displays a few text fields and then whatever is behind that window (almost like the entire window is transparent, except when I move the window, it doesn't change to match what is behind it) My system exceeds the dreamweaver minimum requirements.
I operate on windows xp
I am running the trial version.

I have, Thank you. I kinda sorta fixed the problem, I discovered that when I move the window off of the screen, it appears correctly, annoying but I dont know what else to do.
Thanks alot for replying
-Justin
Date: Sat, 9 Oct 2010 06:18:32 -0600
From: [email protected]
To: [email protected]
Subject: Some windows won't display?
Have you tried reinstalling it?
>

SCCM/WSUS 2007 01-2015 Bulletin Patching issue. Some clients patch just fine, some will not download the content.

Bit new to the admin side, so please excuse some ignorance.
We have approx 6000 end points. We setup this months patches and a couple out of cycle ones we noticed. We are getting a TON of clients that will not patch. They are getting the defintions but when we attempt to run the advertised
patches they fail approx 10 seconds later. However, some servers on the same boundry will patch just fine. We get the error message in the logs that when the client was told to download the content from the DP, it spits out error that content does
not exist. The DPs we believe are having the issues are MPs as well sitting in DMZ. We have 2 sites configured basically the same, both DP/MPs in DMZ are the ones having the issues. We have confirmed clients are able to connect anon to the
DP/MP. But again, some clients are patching just fine.
UpdatesDeployment.log has the following warning listed 7 times.
Not refreshing update presence state as error CI Info status received
But yet does see that it needs 7 patches.
EnumerateUpdates for action (UpdateActionInstall) - Total visible updates = 7
No other logs show any errors on the clients. I have confirmed the content is avalible on the DP/MP it is reporting too. Obviously though since other clients sitting right next to them work still.
Any ideas? Trying to avoid working all weekend. Thank you!

We checked every single log on every MP, DP, SS and many clients. For unknown reasons, deleteing and rebuilding the Jan update list did the trick.

After ApplyMRD Report Rows on some clients are not refreshed

hi all,
i've come across an issue regearding mr delete on some clients using ie for acess to an apex application.
a report displays a number of rows of a single table.
the user is able to check some rows.
a special button branches to an url "javascript:confirmDelete(htmldb_delete_message,'MULTI_ROW_DELETE');"a standard mrd process, using table pk, deletes the checked rows.
most of the clients work fine.
on some clients the deleted rows still appear in the report. the shown data will not be refreshed untill user logs out and logs in to the application.
i double checked that the rows are physically deleted from the table.
any idea if this is an ms ie issue and whch option has to be changed?
and no, customer can't switch to ff because of administrative policy.
regards peter

That could happen if region or page caching is enabled. If yes, disable it by setting it to never.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Some clients are not receiving my mail attachments.

Some clients are not receiving my mail attachments. Other recipients of the same email DO receive these attachments. It doesn't matter whether it is a jpg, pdf, doc, or other. Sending from gmail or entourage works, only sending from apple mail is a problem. This has been an ongoing problem for me in Lion and Snow Leopard. I'm new to this forum, so not sure I'm posting in the right area, but I've searched for an answer and can't find anything. Do I need a plug-in or something? I like my apple mail and don't want to switch, but this is a real problem for me. Help, please!

We have the same problem in Snow Leopard, so the problem isn't new. I've been researching this for a while now. Based on what I've read in a whole load of discussions it seems it's an issue in the way Outlook reads the e-mails send by Apple Mail. I've no idea of the technicalities of this but one obvious difference is that Mail's default formatting is Rich Text and Outlook's is HTML, but what do I know.
We've done variuos test with our PC based clients but with no success: Send as Icon; Window's friendly attachement; Mail Attachement Iconiser, etc. Nothing gets rid of the problem entirely. We're a Mac based Public Relations agency and we send image to the media all of the time...and we have no guarantees that they are getting through.
It's frustrating that Mail doesn't have an option, as it does for plain text, to send in an outlook friendly way. To me it's a huge problem and if Apple isn't going to sort it, given that Outlook is the choice of Enterprise and 95% of our clients, then we're going to have to spend thousands and switch to Outlook. Apple have gone to great pains to promote cross-compatibility with PC's and perhaps this is one little example of where they could try harder.
Mail has not had much obvious love and attention for a while and if there's an Apple employee looking in on this thread, perhaps it's time to love it up, give it a few more bells and whistles (without over-complicating of course) and make it sing with Outlook.
My last attenpt is to try Thunderbird as a default mail client; I'm told it doesn't suffer from the same PC compatibility issues.

How come some apps won't play sound on a USB device but only on the internal speaker while others can?

How come some apps won't play sound on a USB device but only on the internal speaker while others can? Mac OS 10.8.5

You can simply set your system preferences
Sound preference
output - to whatever your USB device/audio interface is
Your question seems a bit vague to me though. So can you actually inform us of what it is you are trying to do and give us examples with named kit.

Some clients won't NetBoot

Similar Messages

Maybe you are looking for