Some cube records don't displaying in BPS layout

Hello, gurus!
I met crazy situation: I see in my cube (thru LISTCUBE) 5 almost identical records, with only difference - package ID - 3 with different APO packages, and 2 - with identical REQU. In my BEx queries, I see the correct sum of all 5 packages, but in my planning layout in BPS - just sum of 3 APO-packages! All packages relevant to queries in cube.
In RSRV I'd find following unrepairable error:
15748 units missing from fact table /BIC/FYCPLBSP; see details.
Could be the reason of ignoring 2 REQU-packages records in BPS layout?

Hello Mikhail,
BPS does not display any records where units or currency key are missing. You have to delete those records and load them properly (put a rule in your transfer rules like "if keyfigure <> 0 and unit is initial. raise error. endif.").
Regards,
Marc
SAP NetWeaver RIG

Similar Messages

Why Some of Elements Wasn't Display Before Opening Layout Of Application

Hi,
is there a webdynpro application that was used without sap portal ( with an url ).
an error occured last time; some of elements weren't displayed in explorer. then i opened the layout of that wda application and tested it so all elements were displayed.
Does anybody know how did it happen? Will it happen one more time?
Thanks.

Might be some personalization applied for those UI elements as per the user. It could be some user settings for those UI elements.
When you check the component, the component configuration has the personlization settings right.

Some child chms don't display topic in topic pane when TOC item is clicked

Okay. I'm not sure what's going on.
We have a master project and various sub-chms that get merged into the TOC of that master project. We have a fairly new sub RH project named "Toolkit Modules" that generates three additional sub chms that are also merged into the master help. They appear at the very end of the master project's TOC:
<master help's toc>
<10 other merged chms>
toolkitmodules.chm
toolkitmodules_blade.chm
toolkitmodules_vwmp.chm
All the topics for the three toolkit modules chms exist in the Toolkit Modules project and are conditionally marked with topic-level build tags so that the right topics appear in their respective chm.
I compiled the three toolkit chms and then put them in the master root directory so that when the master help is generated, they get included properly.
At first glance, all three of these chms appear to be working fine in the master TOC. I can expand and view the master help's TOC for the sub projects just fine, but clicking on a TOC entry does not display
the topics for these two chms in the topic pane:
toolkitmodules_blade.chm
toolkitmodules_vwmp.chm
I'm not sure why.
If I double-click and open up the individual chms from within Windows and view their contents, the topics appear as expected in those chms. It's just when merged, these latter two chms don't do anything from the TOC side. However, I have verified that the topics are indeed getting merged in, because I can use the Search tab to see the topics. In fact, the Locate button on the toolbar even expands the correct TOC and highlights the entry that matches. So something's just not working from the TOC side.
Any ideas?
I'm using RH 9.02.271
Windows 7 64-bit
HtmlHelp output (chm)
Thanks!

Jared
Right now I simply don't have the bandwidth to say "send me your project". You may see me ask others to do so but that will only be where I believe it will be simple or I just need to see something.
Take a look at Item 13 in http://www.grainge.org/pages/authoring/rh9/using_rh9.htm. That covers the fix to the merged CHM help problem that was used before Adobe fixed it in 902. Part of the problem was the HHP getting rewritten so maybe something there will help.
Any merged CHM help users able to pitch in here?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Some RAW images don't display

i have a folder with about 300 RAW photos from my new Canon 50D. In bridge some of them show up but many, seemingly randomly selected show as the generic CR2 icon. I've got the beta of Adobe RAW and i can open the files in photoshop. Any suggestions? Thanks

Update to the final version of ACR 4.6, released today.
Ramón G Castañeda, "Camera Raw 4.6 and DNG Converter Available" #1, 10 Oct 2008 1:02 pm
Then Purge the Cache for each darn folder, one by one, through the Tools menu in Bridge: Tools > Cache > Purge cache for 'foldername'.
Don't use the global purge cache command in Bridge preferences. It's broken.

BPS - How to filter a BPS layout based on keyfigure value.

Hi Gurus,
I am in a requirement to display a BPS layout based on a keyfigure value. Basically filter based on a keyfigure value. I don't want to display any records which contains a value of '0' in a particular keyfigure. Is this possible in BPS.
Thanks,
Mohan

thanks guys for your response.
The macro is not going to help me because the number of records from the database fetch is going to be more than 15000 and the valid records are only around 100. And since BPS cannot display more than 9999 records this would be a problem. This is my assumption. Let me try this out and see how BPS responses.
I tried using the exit function to delete the records from buffer with the condition if the keyfigure is 0 but the other keyfigures values are affect due to this. Meaning BPS keeps track of the changed records and changes the other keyfigure value to 0.
e.g. I have 2 keyfigure, A and B. A is the keyfigure where I check the value for 0 and B is the keyfigure with a non-zero value say $10. And in the exit before processing I have 10 records out of which 2 records are having value 0 for the A keyfigure and 8 records are having value as 1 for the A KeyFigure. And B keyfigure is having $10 for all the records. Based on the condition I delete off the 2 records from memory. SEM keeps track of this change and when you press on the save button in planning layout, the value for the B keyfigure are changed from $10 to $ -10 and saved to the database, I don't want this change in value to B keyfigure happening. So any other work arounds....
Thanks,
Mohan

Why some sites don't display pictures on my IPod Touch?

When I surf the web on my IPT(IPod Touch)some sites don't display pictures....Instead there is a kind of blue Lego cube with a question mark on it...
Thanks,
JF

The most common cause is that the site uses Flash. Currently, the Touch doesnt' support Flash. If it's not Flash, it may be some other protocol or app that the Touch doesn't support.

I'm running windows 8 with PSE11 some of my pic don't display only a gray box with a paper in side,

I'm running windows 8 with PSE 11 ans some of my pic don't display only a gray box with a paper in side it, when i go to a albums most of my pic don't display

Try selecting the thumbnails (Shift+Click) or (Ctrl+A) to select all, then click on the top menu
Edit à Update Thumbnail For Selected Items
If that doesn’t work close Elements and delete the thumbnail cache by navigating to:
C:\ProgramData\Adobe\Elements Organizer\Catalogs\MyCatalog
In side the MyCatalog folder (or whatever name you gave your catalog) you should find a CACHE file:
thumb.5.cache
After deleting that file restart the elements Organizer and wait whilst it regenerates thumbnails.
N.B. The ProgramData folder is sometimes a system hidden file, in which case please follow these instructions before starting.
http://windows.microsoft.com/en-GB/windows-vista/Show-hidden-files

Why some fonts don't display properly

I use Windows 7, Pagemake 7 (with update 7.01)
Some fonts don't display properly in pagemaker file. Sometimes they look blank; sometimes display in part and the rest as blank. In fit-in Window view, sometimes a page displays properly, and next page is blank, go back to the previous page, it also turns blank. Some times letters look garbled. Display varies as and when the view size is changed.Example for the fonts - Souvenir LtBt . What could be the problem and what is the solution ?

Pagemaker is old software, it was designed for use when fonts were quite limited. It will only display the first 256 characters in a font. Modern fonts have moved way beyond this limitation. The solution is to stick with older fonts, or to upgrade to indesign. It does sound like your souvenir font could be corrupted, running font management software is a good practice no matter what program you use.
Jay

HT1766 I deleted some phone records (call numbers, dates) & texts. Can I access them from back-up without restoring the phone. Don't want to alter what I have, just find what I later deleted

I deleted some phone records (call numbers, dates) & texts. Can I access them from back-up without restoring the phone. Don't want to alter what I have, just find what I later deleted

Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

Some graphs don't display in OEM Grid Control 10gR5 (10.2.0.5)

A number of the performance graphs (e.g. Top Activity) don't display i.e. there is nothing but if if you right-click in the empty area you get a small pull down with Print, Settings, About Adobde Flash 10.
This has all happend after upgrading to 10.2.0.5. OMS and client environment is:
Windows 2003 SP2 (32 bit), IE 6 with Flash ActiveX 10, Flash Player 10.
Anyone got any ideas or anyone got it working fine.
Thanks.

Windows Server 2008 OEM 11g Performance graphs do not display.
Click OEM Performance Tab and IE7 information bar displays message:
"Your security setting do not allow websites to use ActiveX controls installed on your computer. This page may not display correctly."
Workaround: Disable Internet Explorer Enhanced Security Configuration in Windows Server 2008
Unlike with previous versions of Windows Server in which you could disable Internet Explorer Enhanced Security Configuration by removing the component in Add/Remove Programs, Windows Components
the Windows Server 2008 implementation of Internet Explorer Enhanced Security Configuration is configured through Server Manager.
Select the root of the Service Manager navigation pane, and under the Server Summary click Configure IE ESC, which is part of the Security Information section.
A dialog box appears, letting Internet Explorer Enhanced Security Configuration be enabled/disable separately for normal users and administrators.
See YouTube video:
http://www.youtube.com/watch?v=OO3PPN1olHY

All Records Not Being Displayed

After executing a query with some 500,000+ hits (using execute_query(all_records)), forms will allow you to only scroll through the first 15,000 - 30,000 records. It displays the correct number of records in the bottom corner (as 'Record: 1/551,327'), but doesn't allow you to view these records. If you push the down arrow on the keyboard you can continue to scroll through the records, but only one at a time, which takes a while for 500,000+ records. If the number of records queried is less than 32768 records, everything works fine, but if it exceeds that number the scrollbar only works for the first 15,000 - 30,000 records.
Any ideas?

You might be running into a memory limitation on your machine.
What is the use case for 500k records? I am yet to find a use for more than a hundred records. Users don't want to scroll thru many records do they? If you are doing some sort of summary you should do it with a SQL statement rather than in the UI. If you want to allow users to see that many records isn't a report a better option?

Generate Sample data for the cube .- I don't want to use the flat file

Hello BI Gurus,
I know there is a sap sap standard program where you write records to the cube. I think first you change the cube from basisc to real time cube and then another program which displays a ALV layout- you can create,delete or change ther records.
I don't want to create a flat file load for this. I want to create 5 records to check the layout.
I forgot the program name.
Can you please let me know the program name.
Thanks
Senthil

A long time for a simple question, so here it is: the program name is CUBE_SAMPLE_CREATE.
Please, mark this question as anweared.
Regards,
André

Records Not Getting Displayed in Advanced Table

Hi All ,
I am rendering an advanced table that displays some records . i have created a VO that is tagged to this Table . The Table was displaying the records satisfactorily initially . Now suddenly the table shows no Search Conducted .
I checked the VO and the AM . I found out that the query gets executed when the executeQuery() Method is called . The records are also fetched . (i verified this using methods like getRowCount() , getFetchedRowCount() , getRowCountInRange )
But the records dont get displayed on the page . What could be the problem . Kindly Help !
Thanks
Chirag Shah

Did you make any change to VO later on which might have change the column aliases?
If you are sure of VO returning the rows during page call, then I will suggest to delete the mapping from table and do that again.
--Shiv

Events added in iCal don't display in Google Calender

I'm using my google address for iCal as I don't have a MobileMe account.
Events added in Google Calender display in iCal, but events added to this account in iCal don't display in Google Calender. I have tried subscribing to my Google Calender in iCal, but the address isn't recognized by iCal.
I have even tried deleting and re-adding my Google Calender, but still no joy.
Are the calenders I am using in iCal and Google the same calender, or are they actually different calenders with the same username? Someone help me sync the **** calenders!

Hi Ellyenne,
Ellyenne wrote:
It didn't help.
I want my iCal events from my HOME calendar to display in my google calendar.
I DO NOT want to move my iCal events to my google calendar. I have way too many. So, why won't my iCal events show up on my google calendar?? My google events show up on my iCal. It's a SYNC. They should be the same.
I'm sorry my answer to Clint is not what you want.
iCal and Google on their own do not do what you want.
There are/were some third party add-ins that worked in the way you describe that were mainly developed before Google Calendar had CalDAV integration.
Best wishes
John M

Math fonts don't display in mail messages?

For some reason when I receive a mail message with math - fractions, equations, etc. these characters don't display. My husband has an iPhone 4 and this isn't a problem on his phone. I am wondering how I can get these characters to display?
Thanks

Hi markatos
Hi Rick Van Vliet
I have the same problem, and I can also (only) underline text.
Since upgrading to Tiger (10.4.8) from Panther 10.3.9, I have experienced a few daft functional problems, eg the 'Enter' key not working on the calculator (the standard one, not the Dashboard version). This turned out to be a '.plist' problem.
Mail was marking all outgoing mail as 'Junk' ... '.plist' problem again.
But I cannot see how to sort this one ... at the moment I am having to format text on a Stickie then paste it into a Mail message in order to do simple things like bold headings (I don't need any more than this really). So the 'Font' palette is working. Message format is set to 'Rich Text'.
Any ideas anyone?
Help will be appreciated.
Thanks in advance.
Paul

Some cube records don't displaying in BPS layout

Similar Messages

Maybe you are looking for