Some devices able to connect to the wireless and s...

So I recently decided to reset my lenovo laptop to factory settings using the lenovo one key recovery. Unlike before, I now cannot connect to my bt infinity wireless or wired internet. It say limited connection but won't allow internet access.
I then realised that several devices are connected and working with the home internet including computers, ipods etc (all of which have been connected before I reset my laptop). But any new devices (including my ps3 and ipad) will not connect and have the same problem as the laptop.
please someone help!

If you've never changed any settings on the hub, bar the admin password, I'd factory reset it - http://bt.custhelp.com/app/answers/detail/a_id/11386
Then see if those devices that couldn't connect now can.
-+-No longer a forum member-+-

Similar Messages

  • HT5706 trouble staying connected to air play with Apple TV even though my device is still connected to the internet and playing.

    I am having trouble staying connected to air play with Apple TV even though my device is still connected to the internet and playing.

    Troubleshoot the network connectivity issues.
    Power cycling the ATV and router is generally a good place to start.

  • HT1595 Why is my Apple TV able to connect to the wireless but not the Internet?

    I cannot connect to the Internet! It's so frustrating it says it can connect to the wireless but not the Internet I know I have a signal because I have my laptop and iPad connected and working fine but its just Apple TV that cannot connect! Also when I continued without Internet it wouldn't let me sign in with my apple id even though I know it was right is this because I wasn't connected to the Internet? Someone help me please

    It's in your router.  Google is your friend, using the make and model of your router and the key words "port forwarding".
    There are lots of guides, for example http://www.wikihow.com/Set-up-Port-Forwarding-on-a-Router
    The hardest part is figuring out where to go in your particular router's menu system to type in the IP address of your Apple TV

  • Our ISP changed the way we access the internet. Since then, wireless devices such as iPhone, iPad and iPod won't connect to the wireless and hold on to it. Devices get on, but then drop the network and can't get back on. Then it will appear, magically.

    Our devices keep getting dropped off the wi-fi. The computer and lap top are fine, but the iPad, iPhone, and iPod all keep losing access to the network.We have tried:
    Resetting the D-link, restoring Airport Extreme to its factory settings, resetting netowrk settings, powering down devices, turning wi-fi on and off. It has been pretty frustrating to say the least. This all started after our ISP changed our... I am not sure what it is called, but the thing stuck on the house outside to broadcast across the valley to the mountain where we get our internet.... Any other fixes?

    I guess the issue is the Airport Extreme. We put back our old D-link and everyone is on. The Extreme did not live up to my hopes - (guest network, limit wi-fi for my children's devices to a certain time period...) And, it didn't last long - I think it is only a year old, if that. I have restored it to factory settings but to no avail.... perhaps it was a dud. Is anyone else actually able to limit access? I set it up but it quit working over and over and the kids were on whenever. Then we started losing all the devices in the last few weeks - laptop fine for wi-fi, iPad, iPod, iPhone all randomly kicked off and let back on.
    This is a great idea - and it would be worth replacing if I knew my new on would work. Thanks for replying lllaass!

  • User not able to connect to the WIreless

    We are facing the issue with a client he is getting the Ip but we are not able to ping even it fails to get the lenk test from the WLC.AP is registered to the Centralised WLC and other users are able to get the access with out any problem .Below are the loggs i got for the user .
    debug client 1c:65:9d:a4:ea:b6
    (Cisco Controller) >*DHCP Socket Task: Dec 05 09:47:07.361: 8c:70:5a:c6:86:28 DHCP received op BOOTREPLY (2) (len 330,vlan 0, port 13, encap 0xec03)
    *emWeb: Dec 06 08:20:19.255: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:20:19.256: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:20:19.259: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    (Cisco Controller) >debug client 1c:65:9d:a4:ea:b6
    (Cisco Controller) >*apfMsConnTask_6: Dec 06 08:21:19.495: 1c:65:9d:a4:ea:b6 Association received from mobile on BSSID 20:37:06:7c:53:a0
    *apfMsConnTask_6: Dec 06 08:21:19.498: 1c:65:9d:a4:ea:b6 Global 200 Clients are allowed to AP radio
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Max Client Trap Threshold: 0  cur: 18
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Rf profile 600 Clients are allowed to AP wlan
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Re-applying interface policy for client
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2164)
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2185)
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 In processSsidIE:4619 setting Central switched to FALSE
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Applying site-specific Local Bridging override for station 1c:65:9d:a4:ea:b6 - vapId 1, site 'default-group', interface 'management'
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Applying Local Bridging Interface Policy for station 1c:65:9d:a4:ea:b6 - vlan 0, interface id 0, interface 'management'
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 STA - rates (8): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 STA - rates (12): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Processing RSN IE type 48, length 20 for mobile 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Received RSN IE with 0 PMKIDs from mobile 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Found an cache entry for BSSID 20:37:06:7c:53:a0 in PMKID cache at index 0 of station 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Removing BSSID 20:37:06:7c:53:a0 from PMKID cache of station 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Resetting MSCB PMK Cache Entry 0 for station 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Setting active key cache index 0 ---> 8
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 unsetting PmkIdValidatedByAp
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 apfMsRunStateDec
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 apfMs1xStateDec
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Change state to START (0) last state RUN (20)
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 pemApfAddMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 START (0) Initializing policy
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 START (0) Change state to AUTHCHECK (2) last state START (0)
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) DHCP required on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1for this client
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1 flex-acl-name:
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 apfPemAddUser2:session timeout forstation 1c:65:9d:a4:ea:b6 - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is  0
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 Sending Assoc Response to station on BSSID 20:37:06:7c:53:a0 (status 0) ApVapId 1 Slot 0
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 apfProcessAssocReq (apf_80211.c:7957) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
    *apfMsConnTask_6: Dec 06 08:21:19.510: 1c:65:9d:a4:ea:b6 Updating AID for REAP AP Client 20:37:06:7c:53:a0 - AID ===> 7
    *dot1xMsgTask: Dec 06 08:21:19.511: 1c:65:9d:a4:ea:b6 Disable re-auth, use PMK lifetime.
    *dot1xMsgTask: Dec 06 08:21:19.511: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Connecting state
    *dot1xMsgTask: Dec 06 08:21:19.511: 1c:65:9d:a4:ea:b6 Sending EAP-Request/Identity to mobile 1c:65:9d:a4:ea:b6 (EAP Id 1)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.010: 1c:65:9d:a4:ea:b6 Received EAPOL START from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.010: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Connecting state
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.010: 1c:65:9d:a4:ea:b6 Sending EAP-Request/Identity to mobile 1c:65:9d:a4:ea:b6 (EAP Id 2)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 Received Identity Response (count=2) from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 EAP State update from Connecting to Authenticating for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Authenticating state
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=160) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 WARNING: updated EAP-Identifier 2 ===> 160 for STA 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 160)
    *apfMsConnTask_6: Dec 06 08:21:20.031: 1c:65:9d:a4:ea:b6 Association received from mobile on BSSID 20:37:06:7c:53:a0
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Global 200 Clients are allowed to AP radio
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Max Client Trap Threshold: 0  cur: 19
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Rf profile 600 Clients are allowed to AP wlan
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Re-applying interface policy for client
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2164)
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2185)
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 In processSsidIE:4619 setting Central switched to FALSE
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Applying site-specific Local Bridging override for station 1c:65:9d:a4:ea:b6 - vapId 1, site 'default-group', interface 'management'
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Applying Local Bridging Interface Policy for station 1c:65:9d:a4:ea:b6 - vlan 0, interface id 0, interface 'management'
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 STA - rates (8): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 STA - rates (12): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Processing RSN IE type 48, length 20 for mobile 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Received RSN IE with 0 PMKIDs from mobile 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Setting active key cache index 8 ---> 8
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 unsetting PmkIdValidatedByAp
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Initializing policy
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) DHCP required on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1for this client
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1 flex-acl-name:
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 apfPemAddUser2:session timeout forstation 1c:65:9d:a4:ea:b6 - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is  0
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
    *apfMsConnTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Sending Assoc Response to station on BSSID 20:37:06:7c:53:a0 (status 0) ApVapId 1 Slot 0
    *apfMsConnTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 apfProcessAssocReq (apf_80211.c:7957) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 160, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *dot1xMsgTask: Dec 06 08:21:20.038: 1c:65:9d:a4:ea:b6 Disable re-auth, use PMK lifetime.
    *dot1xMsgTask: Dec 06 08:21:20.038: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Connecting state
    *dot1xMsgTask: Dec 06 08:21:20.038: 1c:65:9d:a4:ea:b6 Sending EAP-Request/Identity to mobile 1c:65:9d:a4:ea:b6 (EAP Id 1)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 Received Identity Response (count=1) from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 EAP State update from Connecting to Authenticating for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Authenticating state
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=161) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 WARNING: updated EAP-Identifier 1 ===> 161 for STA 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 161)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.063: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.063: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 161, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.064: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.068: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.068: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=162) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.068: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 162)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.083: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.083: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 162, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.083: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.087: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.087: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=163) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.087: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 163)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.111: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.111: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 163, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.111: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.166: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.167: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=164) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.167: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 164)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.173: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.173: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 164, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.173: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.179: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.179: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=165) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.179: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 165)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.184: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.184: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 165, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.184: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.189: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.189: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=166) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.189: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 166)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.200: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.200: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 166, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.200: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.204: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.204: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=167) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.204: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 167)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.216: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.216: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 167, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.216: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.718: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.718: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=168) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.718: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 168)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.725: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.725: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 168, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.725: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.731: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.731: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=169) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.731: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 169)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.738: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.738: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 169, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.738: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.746: 1c:65:9d:a4:ea:b6 Processing Access-Accept for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.746: 1c:65:9d:a4:ea:b6 Resetting web IPv4 acl from 255 to 255
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.746: 1c:65:9d:a4:ea:b6 Resetting web IPv4 Flex acl from 65535 to 65535
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Setting re-auth timeout to 0 seconds, got from WLAN config.
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Station 1c:65:9d:a4:ea:b6 setting dot1x reauth timeout = 0
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Stopping reauth timeout for 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Creating a PKC PMKID Cache entry for station 1c:65:9d:a4:ea:b6 (RSN 2)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Resetting MSCB PMK Cache Entry 0 for station 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Setting active key cache index 8 ---> 8
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Setting active key cache index 8 ---> 0
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Adding BSSID 20:37:06:7c:53:a0 to PMKID cache at index 0 for station 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: New PMKID: (16)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747:      [0000] 8a 3e dc 82 7b 6b ce 00 72 ac 5d be 2a 12 ab a6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Disabling re-auth since PMK lifetime can take care of same.
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 unsetting PmkIdValidatedByAp
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 PMK sent to mobility group
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Sending EAP-Success to mobile 1c:65:9d:a4:ea:b6 (EAP Id 169)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Freeing AAACB from Dot1xCB as AAA auth is done for  mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Found an cache entry for BSSID 20:37:06:7c:53:a0 in PMKID cache at index 0 of station 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Found an cache entry for BSSID 20:37:06:7c:53:a0 in PMKID cache at index 0 of station 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: Including PMKID in M1  (16)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748:      [0000] 8a 3e dc 82 7b 6b ce 00 72 ac 5d be 2a 12 ab a6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Starting key exchange to mobile 1c:65:9d:a4:ea:b6, data packets will be dropped
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Sending EAPOL-Key Message to mobile 1c:65:9d:a4:ea:b6
                                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.749: 1c:65:9d:a4:ea:b6 Entering Backend Auth Success state (id=169) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.749: 1c:65:9d:a4:ea:b6 Received Auth Success while in Authenticating state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.749: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Authenticated state
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Received EAPOL-Key from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Received EAPOL-key in PTK_START state (message 2) from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 PMK: Sending cache add
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Stopping retransmission timer for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.767: 1c:65:9d:a4:ea:b6 Sending EAPOL-Key Message to mobile 1c:65:9d:a4:ea:b6
                                                                                                                        state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.773: 1c:65:9d:a4:ea:b6 Received EAPOL-Key from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.773: 1c:65:9d:a4:ea:b6 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.773: 1c:65:9d:a4:ea:b6 Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 Stopping retransmission timer for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 apfMs1xStateInc
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 L2AUTHCOMPLETE (4) DHCP required on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1for this client
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 Not Using WMM Compliance code qosCap 00
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1 flex-acl-name:
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 apfMsRunStateInc
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 L2AUTHCOMPLETE (4) Change state to RUN (20) last state L2AUTHCOMPLETE (4)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Reached PLUMBFASTPATH: from line 6233
    *DHCP Socket Task: Dec 06 08:21:20.796: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:20.800: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:20.800: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
    *DHCP Socket Task: Dec 06 08:21:20.816: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:20.817: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:20.817: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
    *DHCP Socket Task: Dec 06 08:21:24.515: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:24.517: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:24.517: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
    *DHCP Socket Task: Dec 06 08:21:24.520: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:24.520: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:24.520: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
    *emWeb: Dec 06 08:21:52.267: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:21:52.270: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    (Cisco Controller) >undebug
    Incorrect usage.  Use the '?' or <TAB> key to list commands.
    (Cisco Controller) >*emWeb: Dec 06 08:21:52.272: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:23:25.462: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:23:25.463: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:23:25.464: 1c:65:9d:a4:ea:b6 Central Switch = FALSE

    Please upgrade the WLC

  • Your computer must be connected to the Internet in order to initially configure synchroniz​ation settings. Please ensure that you are able to connect to the Internet and try again.

    I keep getting the above message when I try to configure my synchronization settings...yet I clearly have an internet connection. I downloaded the most recent Desktop Software and that did not correct the problem.
    What am I missing?
    Solved!
    Go to Solution.

    Hello 1066stump,
    Welcome to the BlackBerry Support Community Forums
    The following KB article may help regarding the issue you are having:
    http://www.blackberry.com/btsc/KB16471
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard  it won't connect. What is the problem?

    What am I missing here. I'm sure it is some kind of sitting that is not right.
    Thanks Pat

    Sounds familiar:
    lllaassJan 6, 2015 2:12 PM Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard  it won't connect. What is the problem?
    Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard  it won't connect. What is the problem?in response to Patricia Isaac1
    Power off and then back on the router
    What happens when you enter the network's PW?
    Try forgetting/deleting the network if necessary. To do that go to System Preferences>Network>wifi>Advanced and select the network and click on the minus sign
    Csound1 wrote:
    Turn off the modem and the router, wait 60 seconds. Turn on the modem, wait 60 seconds, turn on the router.

  • TS1398 I have an ipad and just recently am not able to connect to home wireless wifi, the hourglass just spins when clicking the network to connect, other devices work fine

    I have an ipad 2 and just recently am not able to connect to home wireless wifi, the hour glass just spins when clicking the network to connect, other devices work fine and can connect.  Was able to connect at school, but not here at home all of a sudden, help?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT2250 I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

    I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

    Well, you could install the drivers to the wireless printer in you other computers.
    blue apple > System Preferences... > sharing
    check printer sharing.

  • How to restart base station from airport utility? I used to be able to do it remotely  I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

    How to restart base station from airport utility? I used to be able to do it remotely
    I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
    With my prior macbook and same time capsule, etc  if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
    Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
    Thanks in advance

    You are likely forgetting a step.
    Open AirPort Utility
    Click on the Time Capsule icon
    Click Edit in the small window that appears
    Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
    Click Restart

  • I have a Panasonic camcorder PV-GS65 and I used to be able to connect to my iMac and my machine would automatically recognize the camera, rewind the tape, and start the import process as soon as I turned the device on and it was connected.  not anymore

    I have a Panasonic camcorder PV-GS65 and I used to be able to connect to my iMac and my machine would automatically recognize the camera, rewind the tape, and start the import process as soon as I turned the device on and it was connected.  Now my iMac does not even see my device
    Any suggestions?

    You cannot install the apps on the car.
    The cars head unit is merely acting as an interface to the apps on the device.
    If you want to use those apps in the car, plug the device in and leave it plugged in.

  • We haven't been able to validate your Adobe Muse subscription for some time. Please connect to the I

    We haven't been able to validate your Adobe Muse subscription for some time. Please connect to the Internet in order to continue using Adobe Muse -- what does this mean?

    Eunonna please see Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html to resolve your current difficulties activating your software.

  • TS3992 Hello there, this message appears on my ipad screen and it wont allow me to operate the ipad "iCloud Backup requires a Wi-Fi connection to successfully back up to iCloud. Make sure your iOS device is able to connect to the Internet over Wi-Fi."

    Hello there,
    This message appears on my ipad screen and would not allow me do anything on the ipad. "iCloud Backup  requires a Wi-Fi connection to successfully back up to iCloud. Make sure your iOS device is able to connect to the internent over Wi-Fi."  Please any idea of what to do to get rid of this message from the screen.
    Thanks.

    Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

  • TS3048 I have two iMacs 6 feet apart. One has no problem connecting to the wireless mouse and wireless keyboard. The other can"t seem to find either device.

    I have two Imacs 6 feet apart. One has no problem connecting to the wireless mouse and keyboard. The other indicates it can"t find it"s wireless mouse and keyboard.

    Hello:
    A Bluetooth device may only be connected to one thing at a time.
    Barry

  • Does your device require being connected to the same wifi network as your computer to be able to backup onto it?

    Does your device require being connected to the same wifi network to backup onto your computer?
    I know this may sound a silly question but I am a complete noivce with all things iPhone and computer based. Basically, I just wondered, if my phone is connected to one wifi network (as in when am away from home), will it be able to download my content onto my computer which is on another wifi network?

    Thank you.
    'Of course, you could just turn on iCloud backups, which will back up to iCloud at night so long as the phone is connected to power and a WiFi network'
    IS this also the case for iCloud backup? As in, the device and computer must be connected via the same wifi network to perform the backup?

Maybe you are looking for

  • LiveCycle Designer 10 - PDF Vorschau deaktiviert

    Obwohl nur Acrobat XI 11.10 installiert ist kann beim LiveCycle Designer 10 einfach die PDF-Vorschau nicht aktiviert werden. Sowohl Acrobat als auch der LiveCycle Designer wurden komplett deinstalliert und neu installiert. In der Registry wurden alle

  • ECC6 and display of PO

    hello all. we are migrating to ECC6 from 4.6C and one of the issues we encountered, is not crucial but it is annoying. when creating a Purchase order and/or a purchase requisition, after saving and switching to the "change" /"display" transaction, we

  • InDesign packshot generator

    Hi guys! Does anyone know if there's a packshot generator plugin/add on available for InDesign? Or is this something for Adobes dev team? I'm thinking this shouldn't be impossible to do, since InDesign knows how many pages my magazine/book contains,

  • Contacts missing from Desktop

    Outlook crashed. Uninstalled and re-installed. All working, except the Contacts folder on Desktop is empty. Contacts on E2 are fine and HotSync Log show that Contacts have HotSync'd. Where has it gone? Could it be an Outlook issue? Any assistance gre

  • MacBookPro updated to 10.5.6 won't boot from 10.6.3 DVD it came with

    I have a clone image 10.6.3 on an external hard drive also, and when I try to select it as the start up drive for a machine that often freezes on start it says it won't bless that drive as a startup disk, and it won't boot from the original install d