Some difficulties using the domain XBLNR_ALT or data element XBLNR_ALT....

Hi all,
We try to understand what is wrong with ODN in our FI domain.
When we want to consult the table BKPF using filter on field XBLNR_ALT it doesn't seem to work with single value but using range we found the corresponding data if we change the ODN 5700000099 to 5700000099000000.
Using transaction FB03 we have the correct value (5700000099).
I saw an OSS Note 746162 but this not for our SAP version (we have SAP_APPL 600). The index on table BKPF is not present in our system. Do you think that this could create our problem?
Quite strange....
Thanks!
David

Hugo Hinojos
can you let me know how did you resolved this issue. we are also facing the same issue now.
thanks,
suneel

Similar Messages

Change the Domain of a data elements in the extraction structure

Hi experts
I was transport a extraction structure from BW DEV to BW QA System, but in STMS of QA System generated an error "Active ABAP Dictionary" then in T-code SE11 -> visualize -> Components Tab i am watching that the Data Type of a component ZBITRST is QUAN whereas in BW DEV system the Data Type is CHAR which is correct
by double-clicking the component I am watching that the domain of both is different, How I can change the domain in QA System / BIC/VQUAN_000013_000003 to / BIC/VCHAR_000003_000000?
or What is the solution to this problem?
Thanks

Hi
As you told you have correct domain for the info object in DEV system, transport this single info object through one transport.
now check whether domain of the info the info object is correct.
now you can import the extraction structure.
If you want to change the domain type, goto edit mode of info object and select the data type CHAR instead of UNIT and activate the info object. this will change the domain type of your Info Object.
Regards,
Venkatesh

HT201415 actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device pr

actually i am use iphone5 in bangladesh. But i am facing some problem , when i am useing the internet over cellular data network. when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?

Hafizur Rahman wrote:
when i am open the cellular data on but no icon E display but when Enable 3G on-of then E is aviable.its a device problem or Carrier ?
Problem? I'm not even sure what your problem is, much less whether it's a problem with the phone or the carrier.

I've used the Domains Administrator and added 45 domains. Where is that information recorded ?

I've used the Domains Administrator and added 45 domains. Where is that information recorded ?
Thanks,
Bob Larsen

The should be in defaultdomains.xml which will be in your system types directory (if you defined one), otherwise it is in a folder where you installed data modeler.

I had no idea Aurora used the same actual App Data file as it's own source, I thought it was just emulating Firefox. I unistalled it and lost everything...

I had installed Aurora 21.0a2 some time last year and had only used it once. I recently uninstalled it and without knowledge that it used the same exact App Data files as Firefox does, so I removed all data. Now I have lost 100's of bookmarks... I do backup my system often but not my browser data, I had only once made a copy of my Firefox data in August 2013, so I was able to copy and paste that info, which had maybe 35-40% of my bookmarks...
I had tried Windows Recovery a couple times, it says it wasn't able to restore the data successfully each time. I had also tried Recuva, not really sure if it found the file I was searching for, so I would kindly ask any of the Forum Mods or users who would suggest this method, what "file" exactly should I search for.
I had been searching for ".default" and ".defaults" files, and any other data relating to Firefox but with no success.
Do I really have any options of recovery or ....?

You should never choose to remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
You will have to try to recover a recent JSON backup (bookmarks-####-##-##_xxxx.json) in the bookmarkbackups folder of that removed Firefox profile folder with Recuva or another undelete utility.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

HT201412 i have an iphone 4s and it just turned off and wouldnt turn back on until i got home and plugged it in to the mains. however it wont connect to my carrier and wont let me turn wifi on or use the internet. all my data is still in place, please HEL

i have an iphone 4s and it just turned off and wouldnt turn back on until i got home and plugged it in to the mains. however it wont connect to my carrier and wont let me turn wifi on or use the internet. all my data is still in place. however when i disconnect from the charger it switches straight off immediately. it also just flashes up the apple icon (on 10 seconds, off 10 seconds.......) when i connect to either car charger or computer. it also resets itself every single time i turn it back on using the mains charger. please help me understand what is happening to my phone
is there anything apple could do if i took it to one of their main shops???
Kris (bulzy_23)

Sounds like a hardware failure.
Make an appointment at the genius bar and take it in for them to look at. It will probably need to be replaced.

How can I save captured clips to hard disk using the actual video recorded date, not the date I transferred it?

When using Batch capture in AP5.5, the clips are saved to hard disk using the capture date as the Created Date and Modified Date. How do I configure Premier to use the actual clips recorded date (Meta Data Basic/Date Created) so that I can view them in Windows folders and other applications based on the date the video was recorded, not when I imported it.

AFAIK, there's no way to do that with Premiere Pro. You can probably find a utility on the Internet that will change the dates for you after the fact.
Cheers,
Jeff

I want to display some fields using the BDC and i want to know thruogh whic

I want to display some fields using the BDC and i want to know thruogh which transaction these fields are displayed.Could you please help me out.

You can use JFreeChart which is a free and good tool to generate graphs in Java. It has samples and other guides which you can use to get started...

How to get the name of a Data Element of a generic Table!

Hi guys!
In my function i have the following import paramenter
i_outtab type standard table
now i import a table and i want to get the dataelement of the fields.
is there a way to do this??

Hello Thomas
Perhaps the following sample report may be useful for you.
*& Report ZUS_SDN_RTTI_STRUCT_COMPONENTS
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145711"></a>
*& Thread: How to get the name of a Data Element of a generic Table!
REPORT zus_sdn_rtti_struct_components.
TYPE-POOLS: abap.
TYPES: BEGIN OF ty_s_outtab.
TYPES: bukrs TYPE bukrs.
TYPES: kunnr TYPE kunnr.
TYPES: END OF ty_s_outtab.
DATA: gdo_data TYPE REF TO data.
DATA: gs_outtab TYPE ty_s_outtab.
DATA: go_typedescr TYPE REF TO cl_abap_typedescr,
 go_structdescr TYPE REF TO cl_abap_structdescr,
 go_datadescr type ref to cl_abap_datadescr.
DATA: gs_comp TYPE abap_compdescr,
 gd_dtel type string,
 gt_dfies type ddfields.
FIELD-SYMBOLS:
<gs_struct> TYPE ANY.
START-OF-SELECTION.
BREAK-POINT.
GET REFERENCE OF gs_outtab INTO gdo_data.
ASSIGN gdo_data->* TO <gs_struct>.
go_typedescr = cl_abap_typedescr=>describe_by_data( <gs_struct> ).
go_structdescr ?= go_typedescr.
BREAK-POINT.
LOOP AT go_structdescr->components INTO gs_comp.
 go_datadescr = GO_STRUCTDESCR->GET_COMPONENT_TYPE( gs_comp-name ).
 gd_dtel = go_datadescr->get_relative_name( ).
 write: / syst-tabix, 'Data element =', gd_dtel.
ENDLOOP.
END-OF-SELECTION.
Regards
Uwe

Use of documentation flow in data element!!!!

hi experts,
what is the use of documentation flow in data element.
if that field is selected then where will be changes reflected ?
thanks in advance,

Hi,
Changing Data Element documentation (F1 help text)
SAP allows you to modify data element documentation (F1 help text), this could be useful if you want to add/remove information from the F1 help text. E.g. If you are using the field to store info it was not intended for.
Step 1
Using transaction CMOD chose the following menu option
Menu Goto->TExt Enhancements_>data elements->list cust docu.
Enter the data element that you wish to change the documentation text for, then click the change icon(Pencil in 4.6c and tick in 4.6b). You will then be presented with the following screen, which allows you to create new versions of the data element documentation. Simply click on the Change button and enter a name within the customer name range.
Regards

Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.

Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.

Which operating system are you using?
In photoshop elements 6, as far as i know, you can only change the Reference Point Location for transforms using the small grid in the left hand corner of the tool options bar with Transform enabled.

I am having a problem using the help menu in Adobe elements 5

I am having a problem using the help menu in Adobe elements number five.
When I open the help menu, the dialogue box defaults to an unreadable display font. Is there any way to change that default font? Using the help menus to find a solution is not possible for I cannot read what it is displaying.

For product, there is an option in preferences where we can set fonts. There are two options: One is application font and other is system font. I am talking about elements 8 which I have but not sure that will solve your problem which is help related.
Hope Help in 5th version is html which opens in Browser? Please confirm.

When I use the trial version of adobe elements why does it have adobe trial across my work?

When I use the trial version of adobe elements why does it have adobe trial across my work?

That is because you are using a trial... buy the program and you do not have a "watermark" on your output
http://forums.adobe.com/thread/433730

Trying to access SMB share, can read but not write, I use the domain account to autenticate and domain account has access to the share. its a samba domain and im a Windows Admin by trade.

I have two I Mac's Intel i7 models.
I have some problems getting them to write files to SMB shares.
The domain user account I use when requested to enter when i first try to connect to the share seems to go though without a problem and it presents me with a list of mounts (shares) I select one and the folder opens, I can read files and copy them but I cant write to any of the folders.
I have also mounted the network locatiosn to a folder from the terminal while also specifying a user name and password to use but this also doesnt allow the specified user account to write data to the share.
I have confirmed the user account can write to the share by having the user do so from a windows box.
any help from any of you mac guys would be great!!!!
Im a windows fan boy / Windows Server based Network Administrator and am slowly becomming a fan of your macs (mainly due to the Unix terminal access letting me realise there is more control to be had than most haters would lead you to believe).
Peace Out

I should add that I originally formatted the problematic drive for FAT32 from the Mac, but then the WinXP computer couldn't see the drive when I plugged it in directly via USB. That's why I went with Seagate's utility to format it.

Problem with JFMERGE using the last set of data on all form sets

b Here is the scenario...
I have a file of data in character delimited format. Each record needs to produce the same set of forms. I used the Visual Transformation Editor to define the field nominated data file, including the ^form statements. The transformation agent processes the file of multiple records just fine. I get a file from JFTRANS that contains the set of data & form statements repeated for each record in the file.
Great so far.
b Here is the problem...
Unfortunately, the print agent is repeating the same set of data on every copy of the set of forms that is printed. It uses the data from the last set of forms to be printed.
b Additional information...
For ease of building the field nominated file by our custom client program we have standardized on using GLOBAL fields. Therefore, our DAT files contain all the ^global declarations with all the necessary ^form statements at the end. I used the transformation editor to build the same type of file. Therefore the file going to the print agent looks like:
^global name1
data1
^global name2
data2
^form form1
^form form2
^global name1
newdata1
^global name2
newdata2
^form form1
^form form2
The printed result puts "newdata1" & "newdata2" on both sets of form2. Strangely, the correct data values are showing up on both sets of form1.
The only difference between the two forms is that form1 is not defined with the fields as global where form2 does define them as global. I removed the global flag from form2 but that didn't change anything.
I think I know what is occurring. JFMERGE is putting the data elements into the global dictionary and when the same name is in the file the latest data value ends up in the dictionary (thus all the forms print using the last data put into the dictionary). I certainly didn't expect this. I thought it would load the dictionary and print the first set of forms, then reload the dictionary and print the next set of forms. At least that is the way I see it occuring based on the order of things in the DAT file. Based on what is occuring it appears that JFMERGE reads the whole DAT file, building the dictionaries and then processes all the ^form statements.
b My request for help...
Does anyone know what I can do (such as insert some command) to get the correct data on the forms?
It looks like using a fixed record format might do the trick but that isn't an option at this time. As things are right now it looks like I'm going to have to take the data file apart, and make lots of files with one line of data per file.
I have a time deadline to get this printed so if there isn't a way to make JFMERGE operate as I expected it looks like I'll be doing this by hand. Fortunately, there are only 250-300 data lines. Future jobs could have thousands of data lines so if there isn't a way to do it with a multi-line data file I'll have someone create a program for splitting the original file up (and adding the ^job line).

We don't use subforms so some of what you suggest isn't effective for us. Our forms are a duplication of the paper forms and are not dynamic. We design each form separately and our custom filler software (that builds the DAT file) uses a database with the required forms for each print job defined within it. Since we don't have subforms, our simple method of printing is to declare as GLOBAL all the unique fields used on all the forms to be printed followed by the ^form commands. It was a simple & straightforward method for us to do better than 500 print jobs over that past couple of years. In addition, our custom filler software can easily build the DAT files. Because I need to manually declare all the ^form statements my experience with using ^field is that the form must be declared followed by the appropriate field commands (repeat for all the forms). i <many hours later I continue typing this post> Taking the original Transformation Definition File and customizing it for how things need to be when using ^field commands was a time consuming experience (and a learning one). It did the job as I needed but it is an experience I don't want to repeat. There has got to be a better way of building the TDF properly. I'm definately leaning towards a program to split the file into multiple files. Here is what I went through... I did all the editting using Notepad. I changed all ^global to ^field. Then I had to remove the #comment lines. Next was to find any references to fields that had to be global to the top and chang ^field to ^global. Then it was moving the fields around so they were underneath the appropriate ^form statement. Then, since one of the forms was multi-page I had to add the ^page command and sort the fields so they were under the correct page. That was followed by duplicating fields that are used on multiple forms or multiple pages. Then I discovered that the print agent won't do ^page unless "inline processing" is turned off (I did not want to specify the page name as it could change over time) - so I added "^inline off" in front of every ^page. Finally it was removing unecessary field references so the log file would be clean. For those that are interested, the following is an example of my final file. ^global nameA data ^global nameB data ^form nameX ^field name1 data ^field name2 data ^form nameY ^field name1 data ^field name3 data ^inline off ^page ^field name4 data ^field name1 ^inline off ^page ^field name5 data ^field name6 data

Some difficulties using the domain XBLNR_ALT or data element XBLNR_ALT....

Similar Messages

Maybe you are looking for