Some Doubts on SAP Sizing.

Hi Experts,
I am doing sizing for SAP SRM 7.02 server for 25 users concurrent users.
I have entered the following details in the quicksizer tool. I have entered 25 in Medium activity users.
Following results are displayed.
So please tell me the inputs are correct in quicksizer or not? correct me if I am wrong.
In the result it shows 2000 SAPS (Total CPU requirement in SAPS), so please let me know what 2000 SAPS is?
In next screen it shows 500 DB SAPS, here also I am confused.
Please anyone explain me the result, I am newbie in quicksizer and need your help.
Regards,
Amit.

Hello Amit,
there is no right or wrong input in Quick Sizer. It must reflect the business of your company, You have entered 25 medium activity users. This means that these concurrently active users are working with a think time of 60 seconds. Does it make sense? In parallel you could also enter the throughput questionaire. Basically, you have to enter the number of SRM orders that are being processed in a defined period of time.
Of course it's sometimes difficult to find accurate numbers. But you have to come up with some good assumptions and ask the right people in the company (not only IT department but also someone from the application team). It's absultely crucial to work hand in hand with the right people.
Please have also a look into our sizing materials at www.service.sap.com/sizing where sizing problems are being discussed and where you find pretty good sizing materials.
SAPS is a hardware-independent unit which describes the power of the hardware: http://global.sap.com/campaigns/benchmark/measuring.epx
Once you have figured out the SAPS requirements you can have a look at www.sap.com/benchmarks --> two-tier benchmarks to find sample configurations which fits to your sizing result.
I hope this helps.
Best regards,
Sebastian

Similar Messages

Some doubts in BW3.5

<Moderator Message: Please read the rules of engagement. You should not post multiple questions to one thread, also use meaningful subjects. And don't offer points.>
HELLO Guys
I have some doubts regarding SAP BW3.5...cAN anyone please clarify.
1.this is regarding SID Concept.
iIn extended start schema,there will be one fact table connected to many dimendion tables.Fact table and Dim tables are connected by dimension IDs.then this Dim table will hold various characteristics.every characteristic will store the characteristic value and address(pointer) to SID table.This SID table will hold again addresses(pointers) to attributes,text and hierarchy tables(if we assume that characteristic have attribute,text,hierarchy) which in turn contain the values.When a query is executed,the OLAP processor searches first for characteristics in dim tables and then with help of dim IDs traces Transaction Data in Fact table relevant for this combination of characteristics and gives output.Did I understand the concept right?
how does OLAP Processor run if the query is on just text of a characteristic and it doesnot include this characteristic?
2.how does navigational attr decrease the performance?
3.cAN YOU ASSIGN
    a. many datasources to one infosource
    b.one datasource to many infosources
    c.many datasources to many infosources...
can you please give real time scenarios for this....
4.how do SID concept improve BW/BI.
thanks
Surekha Chand
Edited by: SChandx200 on Jul 2, 2009 7:35 AM
Edited by: SChandx200 on Jul 2, 2009 7:37 AM
Edited by: Siegfried Szameitat on Jul 2, 2009 1:09 PM

Hi,
You understanding is correct.
{code)
how does OLAP Processor run if the query is on just text of a characteristic and it doesnot include this characteristic?
{code}
This question of yours is not very clear. Re phrase and post it again.
2.how does navigational attr decrease the performance?
Ans:- Say for example in the customer master table customer phone no is the navigational attribute. Now when you select this navigation attriubte in your report then the processor will go and first check the value of Customer say C1 and then determine C1 phone number. Now this look up of cusotmer will happen for every customer . So if say there are huge number of records for which this look up of customer first has to happen then obviously the performance will be impacted.
Hope it is clear.

Some doubts in Workflow

HI Gurus ,
I have some doubt in workflow basically I know how to use them but i don't know what is functionality ,
could you plz explain me , else suggest me
1. why we have to do delegation , what happens at run time if we don't do delegation
2. What is the diff between task and workitem
Thanks
Prasad

Hello,
I would suggest searching for "sap workflow" on the internet, buying a SAP workflow book and/or taking a SAP workflow course.
regards
Rick Bakker
Hanabi Technology

Some doubts in upgradation

hi
i studied some upgradation documents i have some doubts. please dont give any help files or again links for upgradation
bec i need some scenerio why they need to follow this steps
Check compounding consistency in MultiProviders
Info Cubes Fact views
BEX History
STD SAP Report
0adhoc Templates Activation

Hi suneel,
check this links......
Link: How to SAP BW 3.5 Upgrade Preparation and Post Upgrade CheckList (NW2004)
Even this might be of use:
BI 7.0 Initial Hurdles
May be useful for you,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c9c8be-346f-2a10-2081-cd99177c1fb9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
/message/5971540#5971540 [original link is broken]
You may wish to check my thread below -
https://forums.sdn.sap.com/click.jspa?searchID=13971844&messageID=3308304 Broad caster
Upgrade preparation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
/message/3221895#3221895 [original link is broken]

Record mode - some doubts

Good morning … bom dia …
I have some doubts about RECORDMODE … follow ...
Is it necessary development some ABAP code in transformation ? … or in Initial / Final routine ?
In DTP from DSO to Cube, is mandatory choice the option “change log” ? Or make some filter to select only valid records ?
Is There some configuration on query ?
Or the goal is only know how recordmode works, based on the table ROOSOURCE ?
Thanks in advantage …. Obrigado …
Kokeny, Marcio
P.S.: I already read this some documents:
http://scn.sap.com/people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
(How does a datasource communicates "DELTA" with BW?)
http://scn.sap.com/docs/DOC-54330
(Recordmode Importance in SAP BI along with Delta Handling)
http://scn.sap.com/docs/DOC-29927
(Record mode Concept in SAP BI)
- Record Mode Concept in Delta Management
- 0RECORDMODE and Delta type Concepts in Delta Management

Hi,
Is it necessary development some ABAP code in transformation ? … or in Initial / Final routine ?
Why you got above doubt?
Routines are used as per needs. Not based on 0recordmode.
In DTP from DSO to Cube, is mandatory choice the option “change log” ? Or make some filter to select only valid records ?
Not mandatory. if we run first time dtp with delta mode option then no need to select change log option.
if we perform dtp as init and later delta then we need to choose changlog option for delta.
Is There some configuration on query ?
No. 0RECORDMODE is upto DSO level only to track changes.
Or the goal is only know how recordmode works, based on the table ROOSOURCE ?
0record mode works based on data source delta type.
Data source delta type you cam see from table ROOSOURCE and field deltyp - ABB.ABD.AIE...etc.
Thanks

JDBC Questions have some doubts

hi,
Friends i have some doubts on JDBC Adapter . plz give me answere.
1) Wt is the use of update query in jdbc adapter?
2) Why did u use the flag field in jdbc table?
3) How will u send the data into multiple table?
4) Wt is the receiver str jdbc?
5 Wt is the jdbc configurations
thanks in adnvace.

Hi,
1) Wt is the use of update query in jdbc adapter?
--> Update query is used to update the specific record in the database table based on Key fields.
2) Why did u use the flag field in jdbc table?
--> the Flag field is used to mark the records which are selected by sender JDBC adapter, so next time those records should not be repeated.
3) How will u send the data into multiple table?
--> You can send the data to multiple tables with the help of multi-mapping in the XI.
Accessing Multiple Tables dynamically using JDBC
Accessing Multiple Tables dynamically using JDBC
4) Wt is the receiver str jdbc?
--> On receiver side JDBC, you can either Insert, Update or delete the records. The storder proceduers are the line of codes written in DB2, From XI you can directly execute these JDBC statements. It will be helpful when you will be working on synchronous scenario and need to modify or deal with multiple tables based on complex logics
5 Wt is the jdbc configurations
--> JDBC configuration is based on the JDBC drivers installed.
Refer - Detail explanation
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Thanks
Swarup

Doubt about the sizing in the CPH

Hi gurus!
I have the following doubt about the sizing in the CPH. I'm going to implement the CCMS BI CONTENT, i read the Note 979581 - Installing and configuring the CCMS BI Content, but in the document called "IT Performance Reporting Using SAP NetWeaver Business Intelligence" you can see images in this link:
http://www.servidor-imagenes.com/show-image.php?id=050236bd91654e16c94a559350611dff
here said how I can calculate the sizing based in Data Record Size per each Metric stored, but in specific, about the example: 20 systems, 17 CPH metrics. are included SCM, BI, ECC, SOLMAN in this 20 systems? And about the 17 CPH Metrics is talking about ratios? what's mean the CPH metrics?, How can I know what is my CPH metrics?
I hope can help me
Best Regards
Ramon Sanchez

this theme has been closed on our enterprise

SAP Sizing for potential client

Hello all, There is a potential new SAP client who wants to implement SAP. They want to do SAP sizing. What I understand is some one with S ID should be doing the sizing. Question is, how should they request for new id or do the sap sizing them selves?
I am a Basis guy, but we want the client to do his own sap sizing. How should the client proceed?
Regards
k

Hi Kourosh,
Sizing is something that requires some sort of understanding on varios parameters that Quick Sizer uses. If your client is new to SAP then the outcome of their sizing may not be relevant utlimately.
I suggest for them to use an expertience consultant for sizing. The consultant may use his/her own S-user.
Regards,
Shival

Some doubts in j2ee

Hii..,
Some doubts in j2ee .plz help with as
1.What are the main difference between application server and web server
2. two and three tier architecture differences
by Anand PC

Hi,
1) a) A Web Server understands and supports only HTTP protocol whereas an Application Server supports HTTP,TCP/IP and many more protocols.
b) Web server mainly deals with sending HTML for display in a Web browser, an application server provides access to business logic for use by client application programs. The application program can use this logic just as it would call a method on an object.
c) Webserver is used only for jsp and servlets and for static functionality it has limited functionality and it doesn't provide any security ,persistence and it doesn't support EJB and JMS and JAAS like other functionality
whereas Application server provide all functionalities.
In short, Applicaion Server is a super set of which Web Server is a sub set.
2) Two-tier architecture is a client/server architecture , where a request to do some task is sent to the server and the server responds by performing the task.where as a three-tier or a multi tier architecture has client, server and database. Where the client request is sent to the server and the server in turn sends the request to the database. The database sends back the information/data required to the server which inturn sends it to the client.

Some questions on SAP DMS

Hello
some questions on SAP DMS:-
- can versions of same document be shown graphically. ?
- can links be created for documents. can we make sure that links are not broken when document is moved ?(links to document on 1st location shall not be broken)
- is there a notification mechanism(user can recieve e-mail when document gets changed)
- is there a review mechanism, before doc. is archived.(sort life cycle)
Thanks

Hi Shovon,
1. can versions of same document be shown graphically?
You can display all existing versions of a document info record by using the menu 'Extras' >> 'Versions'. Then you will see all existing document version for this specific document number. Further you will see which is the current version at the moment.
2. can links be created for documents. can we make sure that links are not broken when document is moved ?(links to document on 1st location shall not be broken)
I'm not quite sure what you mean by links to documents. If you mean linking document info records together, I can confirm that this works also in DMS. You can maintain the object DRAW for object links in the customizing and then you will be able to link one document info record to another. The data for all document info records is stored in table DRAW.
If you are talking about originals which are linked to document info records, please note that if you check in an original the system creates a unique LOIO- and PHIO-ID which is stored in the Content Server and in the database tables DMS_DOC2LOIO and DMS_PHIO2FILE. But there are also different reports to migrate original data from one content Server to another (e.g. DMS_RELOCATE_CONTENT).
3. Is there a notification mechanism(user can recieve e-mail when document gets changed)
Yes you can activate an event type linkage for object
DRAW CHANGED DOKST
DRAW CHANGED DWNAM
in transaction SWE2. Here you just have to set the flag for 'Type linkage' (linkage activated). Then everytime the document is changed a notification is sent to the entered USER of this document info records.
4. Is there a review mechanism, before doc. is archived.(sort life cycle)
Normally there is no special lifecycle. You can control this by maintaining a released status and if there are more versions always version with the release status is the current one. But there is no specific date when the document info record expires or something like that.
Best regards,
Christoph
P.S.: Please reward points for useful information.

Some question about SAP CRM consultant

Dear all,
      I'm a center-based consultant in china.Our company is among the first batch to run SAP CRM in china in 2006.Our version is CRM 5.0.From my two years' working experience,the status of using CRM in our company is not very good.Complex UI,sychrorize problem makes our partner not willing to use this system.
     I used to do some ABAP developing then i began to transfer to MM&SD.CRM work is the recent thing.During some months' work in CRM,i found i am more interesting in CRM.
    I want to find a new job in outside consulting company in future.I want to focus on CRM.One aspect is that i'm interested in CRM.The other is that CRM is a new product and there is not so many people doing this.However,i seems getting some worries.First,SAP CRM seems not quite mature just from my understanding in 5.0 version.We need to develope a lot not just using User-exit.I don't know whether 7.0 has changed a lot.I've seen the UI of 7.0.It seems much better.But is it means more company will choose SAP CRM 7.0 other than Siebel?In china,there seems not many CRM projects now and i don't know the status in other countries.Second,CRM may have much differences from ERP implementation because there are many process which can't be solidified.
   In one word,i'm worried about CRM consultant's future.And i hope gurus to give me the answers.THx.

Hi Feng
It would be very intersting to clients as well as consultants to work on SAP CRM. Career wise you have ample opportunities in the same. With the advent of various features in CRM 7.0 version, SAP is now more user friendly and is easy to implement with lot many processes covered as a part of vanila offer.
I wish you all the best and hope this helps.
Regds,
Raghu

Have some doubt regarding the weblog (Lookup's in XI made simpler)

Hi All,
I have created the same scenario as mentioned in Siva's weblog (Lookup's in XI made simpler).
I having some doubts regarding the scenario, it will be great if you help me to resolve the same.
I am having a file-file scenario where I need to do lookup in database(MS-Access) through mapping.
The standard file-file scenario is in place and in addition I have created a receiver jdbc channel . I have also created the receiver agreement for the same in the cofiguration.
While creating the receiver agreement you have to specify the interface name which includes the message typeI have specified the normal format which we specify while configuring the jdbc receiver adapter.
In the message mapping I have created a advance user defined function as mentioned in your weblog which calls my receiver jdbc channel.
I have also specified the select query to be executed in the mapping program.
While testing I am getting the following error
Cannot produce target element /ns0:Role_MT/URole. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
<b>Can you please suggest me what all I need to do in addition to the file-file scenario for this lookup scenario to work.</b>
Thanks and Regards
Rahul

Hi,
Following is my user defined function
//write your code here
String Query = "";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
Query = "Select URole from Lookup where UName = ' " + UName[0] + " ' and UPassword = ' " + Pwd[0] +" ' ";
try{
channel = LookupService.getChannel("DB_service","JDBC_channel_receiver");
accessor = LookupService.getDataBaseAccessor(channel);
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("URole"));
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!= null) accessor.close();
catch(Exception ex){
result.addValue(ex.getMessage());
Thanks and Regards
Rahul

Some doubt with app in E71

I have installed in my E71 some app that i found like "installers or shortcuts to internet" in Menu->Installations->... i downloaded data to install using my wifi, but now i have some doubt. Are those apps for free? For ex: "Tiger Wood.." "MultiScanner" "Wipresenter" "RT GR"
If I go to: Menu->Installations->App. mgr. I can find all the apps installed. I have these ones:
MMSync
World Mate
Nokia WebService Support
Nokia InternetServices S...
Wireless Presenter by...Advanced Call Manager
Web Gate Utils Library
DRM Common Solutions
Top Hits Solitaires
Windows Live - Installed by me
Global Race
MMIO Framework and...
MultiScanner
MMIO Libraries
Spanish - Installed by me
Swedish - Installed by me
Tiger Woods PGA TOUR(R)
Sorry for bad english...I am spanish native speaker trying to do it well. Thanks

I was a little worried because some of these applications to be installed, must download data from internet, and I was afraid that when I start the download, could add a surcharge for the price of the application.
Thanks ofr answering.

APP --- SOME DOUBTS.....PLZ HELP

HI GUYS,,
I have some doubts in APP.
1. why do we give next payment date in F110 while we are running payment.....
2. can we do partial payment for one line item through running APP....
please help me out..
Thanks in advance
Regards,
pavan
Moderator: Please, avoid using SMS language and posting basic questions

HI,
1. If your provid ethe Next payment run date then system will consider below documents.
current run date to next payment run date
in between any Invoices are getting panalities then those will consider in this current payment run.
2. partial payment not consider.
3. APP will consider downpayments.
Reg
Madhu M

Hello I have an imac with os x 10.7.5 and I have some doubts: the new version of garageband 10.0.2 is compatible with os x 10.7.5?

Hello I have an imac with os x 10.7.5 and I have some doubts:
the new version of garageband 10.0.2 is compatible with os x 10.7.5?
I have not installed mavericks. should I install?
Thanks!!

It requires 10.9 or later.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Some Doubts on SAP Sizing.

Similar Messages

Maybe you are looking for