Some DVD's were not recognised by my DVD ROM
Hari bol,
my DVD ROM SR-8174 (Matshita), Driver 1.3.5, did not read or recognise the data of some DVD's I need to play.
No one could help me since today. Does anyone know were the problem is and if there is a chance to solve it, for example by updating the driver........?
Thank you
Sascha
Use System Profiler and see what it says about your DVD drive. It should (if it is like later versions) tell what kind of disks the drive can handle. It will probably read dvd -R but maybe not dvd +R or either kind of RW.
My wallstreet could not read burned a CD used for software distribution. I had to read it on another machine and transfer it using a Zip disk.
Similar Messages
-
DVD+R not reading back on some DVD-ROM drives
The recording device is the built-in SuperDrive on my iBook G4 1.42. I've been archiving copies of my photos to recordable DVD. It's usually 2 copies of each set - one in DVD+R and one in DVD-R. I store each set in a different place.
My preferred media is (Made in Japan) Taiyo-Yuden media sold under the FujiFilm and Sony label. So far, the spindles I've opened and used are the FujiFilm (8x-listed) DVD+R (regular silver label) and DVD-R (from the "Color Tower" package).
The DVD-R recordings seem to read back fine in most DVD-ROM drives I've tried. I have a circa 2001 PC with a DVD-ROM drive, and it doesn't read back the DVD+R copies. It'll just whirr for about 20 seconds and then just stop without the disc mounting. All DVD recordings seem to read back just fine on my iBook G3 600.
Are there any known problems with readback of DVD+R recorded from OS X on some DVD-ROM drives? I figure I'm eventually going to get an external drive that also records DVD+R (I'm thinking that would present the fewest compatibility problems) or a new machine (it's about time after five years).
14 iBook G4 1.42 1.5GB (10.4.3), 12 iBook G3 600 640MB (10.3.9)Just a note of interest. If your machine is 2001
vintage, my guess it doesn't like + media at all.
There are some reports that in some cases that these
older drives can read them sporaticlly at best, this
is normally caused by the poor quality of some
manufactures.
It's a Sony VAIO desktop with a Pioneer DVD-ROM drive. I don't know about "quality" per se, but it probably finicky.
I find that using the best quality media eliminates
many problems. And I realise that it is more
expensive to use this media but in the long run it's
worth the extra money.
Have a look at the Media Guide below.
http://www.digitalfaq.com/media/dvdmedia.htm
Cheers Don
Like I said - Taiyo Yuden all the way unless it's maybe sometime like video storage where it's no big deal. I just got three spindles of MIJ (had to look carefully for that) Sony 16x DVD-R for $12.99 each at CompUSA. They didn't have it on sale, but they price-matched the $12.99 price at Best Buy (my local store only had made in Taiwan stock). I was next to the manager at the customer service area, and she said I could have as many as I wanted at that price. If it were some expensive item, I think I would have been limited to one or two. -
I got a new ipad mini and chose to set up as a copy of my iPad. Didn't sync the music on however as it is a smaller model, not enough room. Now trying to get some pictures and music on. Chose some pictures that were not in iPhoto, got a message that I could only sync with one library, chose cancel, and apply and it downloaded my pictures anyway. Now trying to sync some music but just get "The iPad “Linda’s iPad” is synced with another iTunes library. Do you want to erase this iPad and sync with this iTunes library?" So I hit cancel. Have tried several times, same thing. What can I try?
You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.
-
some import operations were not performed , could not copy the file to requested location , has anyone seen this or have a fix?
cormacc57361247 wrote:
has anyone seen this or have a fix?
Oh, I bet that if you'd done a site search, you'd have got answers to both of those questions... -
Trying to import RAW files (from Canon 5D Mark III) but I'm receiving the following error message "some import operations were not performed". I am trying to copy to my Seagate backup drive, however the only destination it will let me copy to is my Lexar flash drive (where I don't want to store them!). I've checked all the file permissions--everything says "read and write". Not sure where to start I recently switched to an iMac where the problems started (never any issues importing into Lightroom on my PC--just slowness). Please help!
NIKON D3300
The Nikon D3300 Raw format is not yet supported in Lightroom 5 (currently 5.3).
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Raw file formats are proprietary to each camera manufacturer and specific to each camera model. Adobe's Camera Raw engine (used by both Adobe Camera Raw - as a plugin to Photoshop - and Lightroom) must be constantly updated with every new camera make and model which arrives on the market in order to read and edit Raw files from that camera.
Adobe has added support for the D3300 to Camera Raw 8.4 which is about to be released. It is a Release Candidate (RC status) at the moment. So D3300 Raw support will probably be added to the next soon-to-be-released Lightroom update (5.4).
http://labs.adobe.com/technologies/cameraraw8-4-cc/?tabID=details#tabTop
In the meantime, you can download the free Adobe DNG Converter 8.4
http://labs.adobe.com/downloads/cameraraw8-4.html
Using the DNG converter, you can then convert the D3300 Raw files to DNGs then open and edit the DNGs in Lightroom 5.3.
Once Lightroom 5.4 is released (assuming it also has D3300 support) the DNG conversion will no longer be required. -
Urgent please
anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution pleaseSounds like the folder Write permissions issue described here with a solution:
"Some import operations were not performed" from camera import -
Having difficulty with LR5, can view photos on card while trying to import but receive following message "Some import operations were not performed." "The following files were not updated because they could not be read."
Check your destination folder in LR at the top right of the Import panel. LR cannot copy the photos there and so when it tries to import them they aren’t there and cannot be read.
In other words the “cannot be read” message indicates that photos cannot be written to the destination. -
"Some Export Functions Were Not Performed"
I am running Lightroom 4.2 on Windows 8 and routinely receive the message "Some Export Functions Were Not Performed" / "File Cannot Be Written" when trying to export. I have 128GB of space available on the drive I am writing to, do not use a "Second Copy", and have full administrative rights to the drive. There were a couple times when I was able to export an image but when trying to repeat the same process they too now fail.
Any assistance would be greatly appreciated!More detail...
I eliminated GoodSync, Windows 8 Photo app, and Adobe PhotoShop Elements Organizer as the root of the problems as I was still experiencing the inability to export with these services totally disabled.
I still do not know the cause of the problem but when LR4 exports a file that it said it couldn't do successfully it creates an illegitimate JPG file in the destination folder and I am unable to delete the bad JPG file because LIGHTROOM has a lock on it.
I'm wondering if it is a Windows 8 issue.
Anyone else? -
will not export photo. pop up says Some export operations were not performed. This file could not be opened(1). Also when I try to add a key word to photo
the screen keyboard opens and I do not have a touch screen monitor.I have uninstalled LR6 and re-installed and it still does the same thing??????<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>
-
Some export operations were not performed
I have Lightroom 5. I've used it without any problems until now. When trying to export my images I get this message:
Some export operations were not performed
I don't know why this is happening. Searching on the internet didn't help me either, so please, can you help me?
Best wishesHi,
Did you ever manage to solve this? I get the same message, along with this "Could not create a jpeg that met your size limit of 700K" or something to that extent. My raw files are large, but I am fairly confident some files of similar size get exported while others don't. Why? And what can one do about it to predict what size limit will be problematic?
Best,
PL -
Some installed applications are not recognised by App Store
Hi,
I have a few apps installed on my mac book pro. Trouble is that some are not being recognised by App store hence it does not check if an update is available for them. One of them is disturbingly FaceTime. It is part of Lion OS and I have no idea why it shows up as a purchase in my mac app store. The others such as Garageband, iMovie and iPhoto are showing as installed though..
can this be resolved?Nohing wrong with what you see.
App Store usualy only shows updates for Apps that were bought/downloaded from the App Store.
The Facetime app in the App Store is only for OSX Snow Leopard but not for OSX Lion since it became a part of OSX with Lion.
Garageband, iMovie and iPhoto ar shown as installed in the App Store since they were part of the iLife suite that was preinstalled on your Mac when you bought it together with OSX Lion.
Stefan -
"Some import operations were not performed" from camera import
Greetings,
I've been using LR3 for some time and have never had a problem importing before but starting last week (it worked fine on Tuesday, but failed starting Thursday), attempting to import directly from my Canon 7D has been producing this error dialog:
Importing directly into LR3 has worked with this camera since I got it a year ago so this problem is completely new to me.
I can import directly from the camera with Canon's utility, with Image Capture, and with iPhoto so nothing is wrong with the camera or the usb connection.
After impoting the photos from the camera to a folder on the computer with something other than LR3, I can then import those photos into LR from the disk without problems so nothing is wrong with the photo files themselves.
I have tried formatting the CF card, restarting LR3, and rebooting the computer. Nothing has helped.
Not being able to import directly into LR3 is a pain, and one that I would like to go away. Help?
Thanks!
LR 3.6; OS X 10.6.8; intel iMac
Additional information: I just tried importing from the same camera with LR3 on my MBP and there were no problems so whatever is happening is unique to the instance of LR3 installed on my iMac.If it is an ordinary folder, then you can use FInder. Click on the folder in question and they press Command-i to bring up the info window for that folder. At the bottom you should see a section labeled "Saring & Permissions" where you will see and have the ability to change what privigles various users and groups have with respect to that folder. Make sure that you can write to it (on the line with your user name it should say "Read & Write", it it doesn't then change it to say that).
If however (as in my case) the issue is with a device file then the solution may be more complicated. But since you don't mention an external drive I suspect that this isn't the case. -
As above, all of a sudden, on one computer I cannot download from either the Canon 50D or 70D into LR 5.7.1. It will download on another computer as well as on this computer in an older version of LR (4.3). When I first turned on the computer this morning, I also got an error message that "The Lightroom catalog named 'Lightroom 5 Catalog" cannot be opened because another application already has it opened." It was a cold boot, so I am not sure what is happening.
For the second problem being that the catalog is open in another application, go to the folder containing your catalog. You will find a file with the .lock extension. This is a file created by the catalog, and is automatically deleted when the catalog closes normally. Sometimes it can get left behind. You need to delete that file.
When Lightroom says that the file cannot be read, it usually means that it cannot be written to the chosen destination. This tends to be a permissions problem in your operating system. Check to make sure you have write permission for the folder you are trying to import your images to. -
it conn
"cannot be read" usually means that the destination directory (as shown in the Import dialog box, in the Destination Panel) has either
been accidentally changed, so change it back to whatever it used to be; or
does not have WRITE permission, so change your permissions on that directory -
Dsc_5122nef dsc_5123JPG Everything worked fine for the last week. The only thing changed is I removed lightroom 5. How can I reinstall Lightroom 5
Its a 100% failure. I was trying to import 37 photos all failed. I can still import into Lightroom 5. I also can import into Lightroom CC on my other Mac. I tried importing from different cards, my other 7100 and my 5300 same problem. I have tried every combination of card reader, camera and computer I have. The only only time the message shows up is when I try to import into Lightroom CC on my 27 in Mac. Thanks Art
Maybe you are looking for
-
Olá. Alguém saberia me dizer se a solução standard da SAP para Nota Fiscal Eletrônica de Serviços do município de São Paulo se resume a nota "SAP Note 981687 - NFe: For Services in Muncipio Sao Paulo"? Pergunto porque esta nota apenas gera um arquivo
-
How to acheive Pagination and Dynamic sorting in Web layout.
Hi All, I'm new to Oracle Reports. I use Report Builder 10.1.2.0.2. I tried creating a template for simple tabular report. I modified the tempalte for Paper layout, Web layout ie modified .tdf, html, css files. When the data is dispalyed in the web b
-
I have a Time Capsule of the 4th generation and I am pretty impressed since I just had a fried harddrive on my 3 month old Imac and Time Capsule restored it fully including all programs etc. without having me to put in all serial numbers etc. for tha
-
I have problem with my aplle id, i have problem with my aplle id
could you please expl
-
HELP! my Ipod doesn´t accept videos!
Hi everybody! I need help I got a problem and I have no clue how to solve it, well it all start when I try to pass Videos, (movies, music-videos...) to my Ipod, even I passed them before to whatever format it ask me for, I think is MP4, it says that