Some e-Learning on SDN not available anymore?

Hello,
i just was browsing through the e-Learning offers for Service Bus-based integration. Some webinar replays sound very interesting such as "Quicksizing Exchange Infrastructure 3.0 - Webinar Replay". However when I want to launch the presentation only an empty screen appears. Other replays work without problems.
Are some webinars not available anymore or is this just a temporary problem? Do you know more as I would really be interested watching those webinar replays.

Hi Florian,
    I am just tried to view that E-Book you have mentioned and i am able to view that without any problem.
It might be some issue with the machine you are working with.
Regards,
Ravi Kanth Talagana

Similar Messages

  • Some iTunes not available anymore?

    When I go to my playlist, some of the selections are not available. A prompt comes up asking if I would like to locate the selection. Meanwhile, other selections are readily available to play. How can I get the selections back on my play list?

    scripscan wrote:
    Could it be that I somehow broght the selelctions from my pc to the Mac and therefore the selections are only on hard drive and not on playlist?
    Quite possible. If so, find them and use the command File > Add File (or Folder) to Library.

  • I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

    I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • Need help!!!!!! I've forgotten my security questions. My rescue address is not available anymore. So I can't get the instructions to reset my security questions. Please send me this instructions

    Need help!!!!!! I’ve forgotten my security questions. My rescue address is not available anymore. So I can’t get the instructions to reset my security questions.
    <E-mail Edited by Host>

    Contact the Apple account security team for your country for help changing your security questions: Apple ID: Contacting Apple for help with Apple ID account security.

  • In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

    In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

    The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
    To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
    [http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
    If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name

  • Seller of a locked iPod is not available anymore

    Ho to unlock an iPod if the seller has it still locked in his account but is not available anymore?

    You can't, and Apple won't unlock that iPod for you; the activation lock is an anti-theft measure.
    (120934)

  • Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    There is an explanation in the following link in the section "What's new in version 3.0.09440" that there was a problem with the update. It's available again now. https://itunes.apple.com/us/app/cisco-anyconnect/id392790924?mt=8

  • I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store.

    I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store. My Mac Air Book is limited to update up to OS 10.6.8, unaware of updating the new version of Mac Cleanse I bought from App Store, this new version does not support my OS 10.6. How can the App Store provide me with an earlier version of Mc Cleanse?
    Thanks,
    jerson

    It can't. That app is now lost to you.

  • Some of my applications is not working anymore.

    Some of my applications is not working anymore.
    I want to know why, and how to fix it

    What do you mean by not working?
    I would try in order:
    - Resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Deleting the app and redownloading it. This might result in loosing app data.
    - Restore the iPod via iTunes.  First from backup up and if problem persists, restore to factory defaults.

  • Bluetooth is suddenly not available anymore!

    bluetooth is suddenly not available anymore! and i can`t find it in the systemeinstellungen

    For a starting place trythese:
    SMC reset:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    PRAM reset:
    Shut down your Mac.
    Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on your Mac.
    Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
    Release the keys.

  • Cannot access my email folders on iPad mini - the arrow in top left hand corner is not available anymore

    arrow in top left hand corner is not available anymore. Can anyone help?

    You should be able to contact Verizon with the account login information, unless you can get the SIM Card back from whoever you gave it to.  The SIM Card tray is on the top left edge of the device.  There is a SIM Card Tray pin that is advisable to use to get the tray to release.  Once it is out, you can swap it.  If you don't have access to your previous iPad, then you should contact Verizon as the data plan may still be active on the previous device.  This is the first iPad I have had with cellular data option included, but that is the way I understand the situation based on having to exchange my new ipad at the Apple Store.  The Genuis swapped the SIM Cards and my data plan was instantly (after a restart) active on the new one.

  • Surcode Plugin not available anymore

    After installing a fresh Windows 8.1/64 with my CS6 Production Premium, within Media Encoder, the surcode plugin is not available anymore as before.  I can only chose Dolby 2.0 but not the surcode 5.1 plugin.
    How can this be fixed?

    Did you purchase the plugin? The Surcode that was included with Encore was a TRIAL ONLY, would give 3 uses, then you had to buy it for like $300. So if you bought it, contact the vendor (Minnetonka Audio) to retrieve your serial/re-download or whatever needs to be done.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Com.oracle.coherence.environment.extensible.ExtensibleEnvironment not available anymore in Coherence incubator

    We are migrating from incubator 11.x to 12.2.0.
    I noticed that com.oracle.coherence.environment.extensible.ExtensibleEnvironment is not available anymore.
    We used it to load custom cache configs filenames based on standard coherence environment properties.
    Something like:
    If local storage enabled
         load cache-config-a.xml
    else
         locad cache-config-b.xml
    Setting factory and getting cache was like:
    ConfigurableCacheFactory fctry = new ExtensibleEnvironment(cacheConfigName, this.getClass().getClassLoader());
    NamedCache namedCache = fctry.ensureCache(myCacheName, this.getClass().getClassLoader());
    This allowed us to have auto-discovery of cache config filename on client side (thus minimizing JVM settings and simplifying dev environment setup).  Note that we are not using GARs on either client side or Coherence server side.
    What would be the simplest alternative with Coherence 12.1.2 / incubator 12.2 without the com.oracle.coherence.environment.extensible.ExtensibleEnvironment class?
    Tks
    Message was edited by: 962259

    Here is the alternative I found:
    // Let's say I want to programmatically load custom named cache-config-a.xml and pof-config-a.xml
    XmlElement xmlConfig = XmlHelper.loadFileOrResource("cache-config-a.xml", (new StringBuilder()).append("Cache Configuration from:").append(defaultCacheConfigFilename).toString(), null);
    ExtensibleConfigurableCacheFactory.Dependencies coherenceDependencies = ExtensibleConfigurableCacheFactory.DependenciesHelper.newInstance(xmlConfig, null, "pof-config-a.xml");
    ConfigurableCacheFactory fctry = new ExtensibleConfigurableCacheFactory(coherenceDependencies);
    NamedCache namedCache = fctry.ensureCache(myCacheName, this.getClass().getClassLoader());

  • Hi,i have a very big problem....i had an accident with my macbook , i poured some champagne and it does not start anymore....it will work again???

    hi,i have a very big problem....i had an accident with my macbook , i poured some champagne and it does not start anymore....it will work again???

    If you spilled champagne on it, chances are not good.  If you haven't alredy DO NOT turn it on or charge it.  I would immediately take it to the Genius Bar and see if they can clean it up before. 
    Had the same problem with a 15" MBP and a tea spill and I did the opposite.  Trashed the Logic & Keyboard Assembly.  Cost to repair was going to be more than what I paid for a computer so ended up having to replace it.

  • My icloud account is registerd to an old e-mail adres which is not available anymore. But icloud still tells me that the account is not verified, and i have to check my e-mail, but i can't. How can i solve this?

    My icloud account is registerd to an old e-mail adres which is not available anymore. But icloud still tells me that the account is not verified, and i have to check my e-mail, but i can't. How can i solve this?

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.
    You should be able to change your ID at http://appleid.apple.com - click on 'Manage your Account', then in the first pane which opens you will see your Apple ID with an 'Edit' link to the right of it. Click that and you should be able to change the ID to your email address. Then you can sign in with it in System Preferences>iCloud to open an iCloud account and create a new @icloud.com address.
    If you are not inextricably wedded to using your existing ID you can skip this step: just follow the method described by IMP68 here:
    https://discussions.apple.com/message/22283348#22283348
    this will enable you to create an ID which is also the @Icloud.com address which you choose. (You can still sign into iTunes with the old ID if you want to - there is no connection between the two.)

Maybe you are looking for

  • Why can't I delete the file?

    What I want to do is: After user download the file from web, the application will delete the file automatically on ther server. However, the delete function cannot work which it prompts the java.lang.Exception, I suspent it is the download process ho

  • FCP not reading sequence which is present in project file

    This problem started after rebooting, after Apple Software Update interrupted editing to update Quicktime. My main sequence fails to appear in the bins and the timeline. It does appear to be present in the project file when viewed with TextEdit. Earl

  • FRM-41211

    Have been getting FRM-41211 Integration error SSL failure running another product only when running a report(6i) from Forms(6i) for the first time. Subsequent runs work ok. ie once the reports background engine has started. Checked Technet but nothin

  • Firefox now always opens four tabs when I start it. (home page, plus three latest add-on updates)

    I updated Firefox and all the add-ons. Since that time, Every time Firefox is opened, it always opens four tabs. One is my home page. One says Firefox has been updated. The other two are the notices for two add-ons that were updated. It all began at

  • Satellite A300 - Win 7 installation issues

    I purchased this Ultimate edition of windows 7 and now installing this o.s on my computer, i end up with this error "Windows setup could not configure windows to run on this computer's hardware", when it reaches the point "Completing installation" th