Some easy help requested
hi - I am seeking some easy help - my devices stopped receiving e-mails overnight - I reset my password - my phone now sends and receives - but not my mac book pro - I changed the passwords in the .me mail preferences - suggestions?
Hello there, Snowy Joey.
The following Knowledge Base article offers up some great steps for troubleshooting iCloud Mail in OS X Mail:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
If your account is with a different ESP then feel free to review the recommendations found in this article:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
Can some 1 help me find drivers for my cd player
i lost my cd drivers in a hard drive crash can some 1 help me recover them ?
Identify your notebook/pc
Look at the base/rear/side of the notebook/pc at the barcoded sticker.
Post items numbered 1 and 2 on the following image. Your barcode may be slightly different but will still have the important imformation needed for us to help you.
###Do not post the serial number as it is personal information.###
Post the installed operating system version ( and whether it is 32 or 64-bit )
Not posting the information as requested will delay our responses and troubleshooting of the issue that led you to author a thread.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
WLC2106 + LAP1131AG configuration help request
Greetings Everyone.
One of my customers asked me to configure a WLC 2106 and 2 LAP 1131AG (lightweight) for corporate/guest Wifi.
Basicly they want to implement a good wifi connection for internal use and a guest one with different QoS. The two lans
should both have dhcp but they must bet kept segregated so that none from the Guest wifi can access corporate resources.
Since i've never configured a WLC from scrath i lightly supposed it would be quite straigh forward as routers and switches from Cisco.
Unfortunately i was totally wrong.
I've downloaded the "Cisco Wireless LAN ControllerConfiguration Guide" (Soft.Release 6.0 June 2009) and after i red it i made up this workflow
for the configurations:
1) Configure Controller: (via serial)
- Set Management Interface parameters (IP- SM - Def GW - Dhcp server IP)
- Set Ap-Manager Interface parameters
- Virtual Interface parameters
- Set Admin Credentials
- Dhcp Configuration (internal and/or external)
2) Ap registration on the controller
- Configure vlan with dhcp request redirection to the dhcp server
3) Configure Wlan following customer's requests.
- Configure Wlan Auth for Corporate/Guest Wifi
- Configure QoS for both Wlans
Unfortunately i'm experiencing issue while trying joining the AP to the WLC.
It appers that the IT guy of my customer tried to configure one of the Ap.
In that Ap's flash i find files referring to a "mesh" configuration like:
mesh_cfg.txt - mesh_port_cfg.txt
which are not present on the other Ap.
I've tried to register both the Ap using:
1) Internal DHCP
2) External DHCP (microsoft W2k8 R2)
3) External DHCP (non cisco router)
But as a matter of fact they got the ip from dhcp but they don't show up in the WLC GUI.
So, resuming my issues sounds like:
1) Can't make Ap join the WLC
2) There are configuratin file on one Ap that i can't clear
3) DHCP configuration is probably wrong.
Since i'm quite lost, i'm ready to learn from anyone who could spare some time helping me out.
Thank you in advance!
Regards
Alessio
P.S.
Ap version is the following:
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 11-Aug-10 15:39 by prod_rel_team
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)Good Day Everyone.
After a long fight, the insights of Stephen and Scott and:
https://supportforums.cisco.com/docs/DOC-13960 and
https://supportforums.cisco.com/thread/2003153
I finally managed to wipe the old configuration and to configure a LAP 1131 attached to one of the POE of the controller.
After having configured a Wlan and having set the correct DHCP redirection i'm able to connect and get an ip! (WHOA!)
I've had to set a manual ip address on the AP (let's call AP1 from now on) and to manually point it to the controller.
I was thinking about using this configuration at the customer's site getting ips from the internal DHCP and thus letting employees using the internal resources of the company.
With the same idea, i started to configure the second AP (AP2 from now on).
So i set up a dynamic interface, always on physical port 1 of the controller, gave it an ip address on another class.
Got into the antenna via console and set an ip accordingly.
I expected the controller and the antenna to communicate immediately as the AP1 did before BUT:
LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response
LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
%SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET JOIN RESPONSE.
%LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
And keep reloading itself on, and on, and guess? Yes, on.
I'm sure i took a wrong step somewhere, could someone be so kind to enlighten me about it?
Thanks in advance!
Alessio -
Process on Help request and Process on value request events examples
HI All,
Can anybody please give me some examples of Process on Help request and Process on value request events.
Thanks in advanceHI,
Check programs
<b>demo_selection_screen_f1</b>.
<b>demo_selection_screen_f4.</b>
Regards,
Sesh -
Wifi works poorly on my brandnew ipad2. can some one help me or shall I return it to the store?
Wifi works poorly to none on my brandnew (three days old) ipad2.
The same Wifi connection works perfectly with my PC laptop.
Can some one help me or shall I return it to the store?Try here...
Apple - Support - iPad - Wi-Fi -
SOME PLEASE HELP ME I DONT KNOW WHAT TO DO.....(M-audio)
SOME PLEASE HELP ME I DONT KNOW WHAT TO DO..... SO I RECIEVED MY M-AUDIO MOBILEPRE SOUNDCARD. I CONNECTED THE USB TO MY MACBOOK (2009-2010) AND I CAN CHANGE MY COMPUTERS OUTPUT TO THE M-AUDIO MOBILEPRE... SO IT SHOWS ITS CONNECTED. NEXT I DOWNLOAD THE M-AUDIO MOBILEPRE DRIVER IT CAME WITH IN THE BOX AFTER THAT IT SHOWS ITS CONNECTED ALL GOOD....BUT WHEN I DOWNLOAD THE DRIVER "M-AUDIO MOBILE PRE USB" I PLUG IN MY SPEAKERS AND IT SAYS "UNABLE TO CONNECT TO M-AUDIO MOBILEPRE. IS IT TURNED ON?" AND ITS OBVIOUSLY TURNED ON AND CONNECTED......SO MY COMPUTER READS THE SOUNDCARD BUT IT WONT LET ME CONFIGURE THE SOUND SETTINGS IN THE "M-AUDIO MOBILEPRE USB" DRIVER ....WTH IS M-AUDIO MOBILEPRE THE SAME THING AS M-AUDIO MOBILEPRE USB???? IF SO HOW DO I CONFIGURE THE SOUND SETTINGS IN MY COMPUTER!!!
Contact M-Audio support, I suspect they will have further information that you need rather than this forum.
-
I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."
Lmwilliamson wrote:
Kernel panics:
After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists.
I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
I am able to use my computer in Safeboot mode (only)
Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
..Step by Step to fix your Mac
Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about. -
Hello can some please help I am trying to watch my HBO go on my apple tv I have sound no picture. I can watch my iTunes videos and youtube on my airplay with my ipad and everything is updated so I know it works. But not on HBO go, Max go, showtime go.
What you want to do does not work with an iPd running iOS 5. See the screenshot.
The latest update for HBO GO does allow for AirPlay on Apple TV - sound and video - but only on devices running iOS 6 and Apple TV running 5.1.1 or later - according to the app description. -
Report Scripts - Please Can Some One Help Me
Hello Gurus,
Is it possible to display 2 members of the same dimension in adjacent columns using Report Scripts? if not what is the best available option?
Consider this Sample Outline
+Product
+-Cofee
+---Cafined
+-------1100
+-------1200
+---Decafined
+-------1300
+-------1400
+-Soda
+---Coke
+-------1500
The format of the desired report is
======= Jan Feb Mar
1100 Cofee 8 8 8
1200 Cofee 8 8 8
1300 Cofee 7 7 7
1400 Cofee 7 7 7
1500 Soda 6 6 6
================
Please Can some one help me in this regard!
Thanks In AdvanceIf I remember correctly when I wanted to do something similar I imported the report with the level 0 members into SQL Server and then joined on a mapping table (was a parent/child table in our case) to get the other column. In our situation we already had the mapping table readily available because this is where the dimension was built from!
-
i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.
You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
Hope that helps. -
could some one help me with something important i have a 2.8 ghz intel quad core Imac with 10.7 with bootcamp 4.0 but still getting that black screen while trying finish the install of windows 7 etc. or do i need a new mac for it to work properly
This might help point you in the right direction.
http://support.apple.com/kb/HT4818
Hope it helps
Also google it and lots of results come up including youtube clips.... -
please does anyone knows how to delete the "others" on the iphone becuase it take me a lot of spaace and i cant have anything i have 5 GB of othres coan some one help me please?
If restoring using your backup didn't work, you'll have to save as much of your data as you can (import your photos to your computer, sync your contacts and other data with iCloud, email things like Notes and Voice Memos to yourself, sync with iTunes to transfer all your purchases, etc.) and then restore it as new without using your backup.
-
I have garagaband for iOs in my iPhone 4S, I connect my Squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?
You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.
-
In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks
See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem. -
I HAVE A MAC LAP TOP MAC BOOK AND WANT JUST TO REINSTALL THE SOFTWARE I DONT CARE ABOUT MY FILES I HAVE BACK UP BUT WHEN I INSERT THE DISK VERSION 10.5 WHICH COMES WITH MY COMPUTER DOESN'T WANT TO READ I HEARD THA IS TRYING BUT NOTHING,
CAN SOME BODY HELP ME...There is a possibility that the disk drive could be broken, if it just spits it back out that usually means its toast. If your MacBook has a Core 2 Duo processor, you can install Lion (via a thumb drive not disks). Here is a link to the Lion thumb drive.You can also still order them for $19.99 by calling 1-800-MY-APPLE. Also you can borrow an external disk drive and try the Leopard disks that way as well.
Good Luck!
Maybe you are looking for
-
It was working fine (had gmail, gmail calendar and blogspot running), and all of a sudden all the gmail webs stopped working properly and I got the message saying that my browser was too old and some features weren't available anymore.
-
Having worked as a web-designer for 6 months using Photoshop, I spend last weekend exploring the possibilities of GIMP convincing myself that I could master it with minimal effort. How wrong I was... The GIMP interface, although nice, was just WAY to
-
How to use ovi maps between to countries
i tried to put two address one in uk other one in france it cant find address in france i have got uk and french maps installed help please thank you
-
Hello everyone. We have our PDF form and are having issues with everyone being able to submit it from our website. The link is http://qualitystaffingsolution.com/test-pdf/ But after submitting it, one of our programmers can get his to go through on
-
Open/browse windows-share or open explorer to browse windows-share
hi everyone, i need to browse a public windows-share. i tried to create a link which points to server\share but i just get "com.sap.tc.webdynpro.services.exceptions.InvalidUrlRuntimeException: Invalid URL" exceptions.. some for opening an internal wi