Some emails I send are arriving with attachments but with no text in the body of the message. In the sent box my emails look OK. So it took me a while to know this was happening.
I have an Apple Mac OS X Yosemite 10.10.3 with a 2.7 GHZ Intel Core 15 Processor. 8GB Memory.
Just discovered that some emails I have sent with attachments have arrived with the attachments OK but my message has disappeared from the email. In the Sent box, the email looks OK with message intact. Has anyone else experienced this? No idea what to do.
This is the Mac Pro desktop forum.
In the received message does the subject appear correctly?
Is just the body message field blank?
What app is the recipient using?
Can they try another pp?
Is there anything strange in the body? Like special characters?
Similar Messages
-
I am using OS X and some of my customers are not getting attachments sent with Apple mail. This is very frustrating. Someone please help.
Run the 10.5.8 Combi Updater again, then reboot your Mac.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update -
My Mac OS X (with 10.6.8 software) Mail 4.6 sends emails that other email clients don’t recognize as attachments, but as embedded pictures. When I receive emails from others, I do not see whole image either. I did change "rich text" to "plain text" in message format - no results.
My daughter has Mac (10.8.5) with Mail 6.6, which does not have this problem. Can I install 6.6 instead of 4.6 or do you know other fix?
Help, please?
Thanks,
AndrewI've been having the same problem now for several months (at least 3-4 if not more). And the frequency of Mail quitting is increasing, several times in a few hours. And as with you, no particular message pops up before hand or not even the beach-ball spinning first and then quitting.
I too have been sending Apple the crash reports. However, I have not contacted Apple Support yet. Hoping to find the answer in this forum, but again, no luck.
If you have found a solution since then, please advise. Or if anyone else out there knows of this issue and can help, that would be greatly appreciated. -
I am using Firefox 31.0 on MAC 10.9.4. Firefox crashes often and mainly when safari opens alongwith Firefox. This was happening with firefox 30.0 also. The version 28.0 is working fine but one of the site is not working under this version, the site works fine with safari but not Firefox 28.0 so updated to 31.0, now i can open the site but Firefox is crashing.Help.
I tried the steps mentioned below:
--reset firefox
--uninstalle completely and re-installed.
--disabled add-on.
--disable "use Hardware accleration".
--set value for cacheused under "about:config".
Same issue, please help.We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article. -
I receive e-mails with attachments, but when I forward them the attachments are reduced in size. What do I need to do to have them forwarded the same size as I received them?
If the attachments are photos, when you forward them, look on the bottom right of your compose window, change to "actual size". It's probably set to small as displayed here:
Regards,
Captfred -
Did you know this was up on FB?
Did you know this was up on FB? https://www.facebook.com/events/1590846764481403/1593647247534688
You are absolutely right, it is good business practice to check out the offerings from a company before you show or give it to your customers.
I guess I just assumed that there would be a cut-out on the front cover of the Aperture books, since the soft cover books I ordered from iPhoto did have the front cover cut-out.
My question, however, is where in the description of the Aperture hard cover book does it state that the cover photo is pasted on ? It is difficult to tell how the front cover is constructed from the photos on the Aperture web site.
...... I may have missed it.
A lesson learned!
Thanks for your comments. -
when I move my mouse Itunes stops playing music. Sometimes this happens immediatly and sometime it take 10 to 15 sec. I tried playing Itunes and then tabing another program but same result. If I click on play and do not move mouse Itunes works as usual.. This was happening before I installed latest version. I have installed latest version three times. First and install, then as a repair, and third time I unistalled Itunes and reinstalled i.
when I move my mouse Itunes stops playing music. Sometimes this happens immediatly and sometime it take 10 to 15 sec.
At various stages over the years, mouse-related iTunes trouble has been associated with driver conflicts. So it might be worth following up on that possibility.
Head to the drivers and downloads page for your model of PC, and check to make sure you're not behind on any chipset and input-device-related driver updates. (And while there, just in case, also check to make sure your BIOS, sound-card/integrated audio, and video-card/display-adaptors are up to date.)
If you're behind on anything, and you update, does that help with the mouse-related iTunes issues? -
When I want to put a bookmark in my favourites, my browserwheel want turn arouund and around for half a minute. This was happened after several updates. Do you have a solution ? it is a very disturbing thing.
Don't you have a deadline?
Oh, sorry, I thought this was an URGENT query because you have clients waiting.
Keep calm, carry on. -
Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help
Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan -
I am having trouble with my security questions, I want to change them, so it says that it sent me an email to change it but it never shows up, so I can't buy anything now?
This issue was resolved! I didnt think about restoring my computer to factory settings but I did and now my computer works like brand new. basically, just back up your files and do the following:
http://www.youtube.com/watch?v=yPmT5Xbb8p0 -
my screen cracked on my ipad they are going to send me a new one but i need to save a video(my wedding) thats on the one i have now....i'm not very computer savy.....the lady said i can save ,sync, something all my info then put in on my new one....Help me
You have to import the video to your computer by connecting the iPad with cable and then using iPhoto if you have a Mac or Windows Explorer or any other camera application that will import photos and videos. Read this for instructions.
iOS: Importing personal photos and videos from ... - Support - Apple
Make sure that you backup and sync with iTunes as well, if You have never synced with iTunes before, it might just be easier for you to backup with iCloud. You can restore from the backup when you get the replacement iPad.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766 -
Using Mac OSX 10.7.1: recently replaced our DSL modum and wireless router, suddenly I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing history, forms, cookies and cache but it continues to happen.
Ok, first thing, why are you doing anything with WAMP or XAMPP when you're running a Mac? MAMP should be what you want unless you're not explaining part of what you are trying to do.
2nd thing, I haven't used MAMP in a while, but there are two possibilities for not seeing what you want to see once you have MAMP turned on. One possibility is that you already have "Web Sharing" turned on in your Sharing Preference Pane. If that is the case, port 80 will already be taken and you'll be seeing the default Apache install (files are stored at /Library/WebServer/Documents/). This would push MAMP to either not turn on it's web serving capabilities, or to push it to another port. The other possibility is that MAMP defaults to another port anyway. So instead of localhost, you might have to type in localhost:8080 or something similar. I believe the control panel that gets installed can take you to the currently MAMP-served page, and it can also help you change which port your serving on.
80 is the default port for web serving and the ONLY port that will let you get straight to the server without having to type in webaddress.com:port# instead of just webaddress.com. -
I have changed my apple id, and its ok when i sync my Iphone with Itunes, but ON my Iphone still my old apple-ID is there. I can NOT buy things from Itunes or Upgrade anything now, how to fix this?
I recently changed my email address and want to change my Apple ID account to match. I have created a new Apple ID to match the new account but now I can't sign into iCloud on our phones or computer with the old Apple ID. I can't make any changes on iCloud on our phones because it directs me to the old account, which I can't sign into. I also can't sign me in on my computer to make any changes. Help!!! Now I have two addresses and can't access the one that directly affects my devices.
-
I changed my 4 digit password to lock the screen and forgot what I changed it to. Now phone is disabled and says connect to itunes. Has this ever happened to anybody? How can I fix this? I share my phone bill with my mom and my itunes account with my husband? I have all the apple ID's if needed
http://support.apple.com/kb/HT1808
-
My screen won't work, i have tried turning it off but i cant swipe the power down button because my screen doesnt work. I have only had my iphone 4s for one day and this has happened, someone please help me.
Did the trick! Not sure what I did to cause the screen to go numb, but this worked perfectly!!! I cleaned the screen and must have inadvertently selected something that locked the screen. This perfect solution kept me from having to run to the Apple Store. Many thanks.
Maybe you are looking for
-
Coding with javascript in EDGE tutorials/samples from start to finish
Hi I realize the forum is good sourc for javascript tips. But for us un-whiz kids that take advantage of all the gifts you geniuses at Adobe create, could there be a javascripting for Edge workshop? Coding from start to finish. If one does not know h
-
How to call program through process chain
Hi Gurus, I am in the position to execute the abap program through process chain, I have used abap program as process type in process chain(First time I am using this process type).when I am executing the process chain, the abap program is not execu
-
Hi all, I was wondering if anyone here knows how to add Japanese as an input language for the 8350. I've done some searches on google but everything was from 2008 or early 2009 and pertained to other models. Currently, my Blackberry can read (rende
-
Photoshop CS6 Crashes on Launch
Hi! I was using an Adobe free month trial of CS6 Production Premium about one month ago, before I purchased it for keeps. Photoshop was working fine. Ever since registering my CS6, though, whenever I try to launch Photoshop, it gets as far as "Measur
-
After Upgrade to lion, i can't use iPhoto
I see Iphoto in the dock and i find the fotos with the finder, but cannot open the program.