Some error in cluster alertlog but the cluster and database is normal used.
hi.everybody
i used RAC+ASM,RAC have two nodes and ASM have 3 group(+DATA,+CRS,+FRA),database is 11gR2,ASM used ASMlib,not raw.
When i start cluster or auto start after reboot the OS,in the cluster alertlog have some error as follow:
ERROR: failed to establish dependency between database rac and diskgroup resource ora.DATA.dg
[ohasd(7964)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
I do not know what cause these error but the cluster and database can start normal and use normal.
I do not know whether these errors will affect the service.
thanks everybody！
anyon has the same question?
Similar Messages
-
I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks
You cannot customize the Safari toolbar on the iPad.
What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser. -
BI cluster DOWN but the services and the admin server is all UP in OBIEE 11G.
Hi
Please suggest me some solution that if the BI cluster is DOWN and all the other components are all UP.Only the BI cluster and the Biserver_1 is DOWN under bicluster.so that the analytics is not working and showing in the Internet Explorer as "The Page Cannot be Displayed". But the EM and the Console are Working fine.Some times it may happen because of the services if they are not started in order
./startNodeManager.sh
nohup ./startWeblogic.sh -Dweblogic.Management.username=username -Dweblogic.Management.password=password > AdminServerStart.log & tail -f AdminServerStart.log
nohup ./startManagedServer.sh bi_server1 -Dweblogic.Management.username=username -Dweblogic.Management.password=password>bi_serverstart.log & tail -f bi_serverstart.log
./opmnctl startall
Try this and let us know the out come.
Mark if helps,
Thanks, -
ERROR: Exception occured while encrypting the configuration and database
I'm facing below issue/error during the OIM 11g R2 configuration (fresh install). Resolutions from other blog with same error (DOMAIN_HOME misconfigured) isn't helping in my case.
Thanks for your help
updateMLSLocale:ORACLE_HOME :/fmw/Oracle_IDM1
updateMLSLocale:LOCALE_PROPERTIES_FILE :/fmw/Oracle_IDM1/inventory/Scripts/ext/jlib/oim/OIMLocales.properties
java.lang.Exception: Exception occured while encrypting the configuration and database
at oracle.as.install.oim.config.util.EncryptConfigurationAndDB.encryptConfigurationAndDatbase(EncryptConfigurationAndDB.java:239)
at oracle.as.install.oim.config.OIMConfigManager.encryptDB(OIMConfigManager.java:1035)
at oracle.as.install.oim.config.OIMConfigManager.configureOIM(OIMConfigManager.java:891)
at oracle.as.install.oim.config.OIMConfigManager.doExecute(OIMConfigManager.java:583)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: Exception occured while encrypting the database
at oracle.as.install.oim.config.util.EncryptDataBase.encryptDBContent(EncryptDataBase.java:159)
at oracle.as.install.oim.config.util.EncryptConfigurationAndDB.encryptConfigurationAndDatbase(EncryptConfigurationAndDB.java:230)
... 12 more
Caused by: java.lang.Exception: Exception occured in updateMLSLocale method while updating Locale to OIM DB
at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:318)
at oracle.as.install.oim.config.util.EncryptDataBase.encryptDBContent(EncryptDataBase.java:125)
... 13 more
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV_OIM.UK_MLS_LOCALE_MLS_LOCALE_CODE) violated
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3904)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1512)
at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:310)
... 14 moreHi
I faced this issue before ,Reinstall is the option you have .Verify the version of RCU before you start creating schema .Set all Pre DB setting ,hostname and IP Address ,If DB and OIM are in ifferent machines check pinging from both the sides .
Please Drop all OLD schema ,Create a New "Prefix" for fresh installation , don't use old schema .
Let me know .
Thanks,
Ari -
Some webpage cannot be loaded, but the same page can be loaded using other browser like safari, IE
I am browsing some local website about properties. When I browse pages with pictures, it cannot be loaded. It was stated in the bottom left corner of the browser that data was being transferred, but it was not true. This problem occurs when I updated the browser version to 4.0. I am fine with the old Firefox version. Thanks.
I am browsing some local website about properties. When I browse pages with pictures, it cannot be loaded. It was stated in the bottom left corner of the browser that data was being transferred, but it was not true. This problem occurs when I updated the browser version to 4.0. I am fine with the old Firefox version. Thanks.
-
Hi
Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message.
Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
Server does not have a dependency on it.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
Any help please
kam
KAMELHi Saurabh
Exactly I have SQL SERVER 2012
Failover Clustering in windows server 2012 with two nodes with
two instances and exactly I run them in the same server and each instance with
three drives Backup, Data and log.
KAMEL -
I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks
What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page -
ipod sync problems
ipod 2.2.1 touch OS10.6.8 itunes 10.6.1
The photos sync but the calendars and contents will not. I keep getting this error message...
«iTunes could not sync information to the iPod «name of iPod» because a sync session could not be started.»Greetings,
See this post: https://discussions.apple.com/message/12799057#12799057
Cheers. -
ERROR: /dev/archiso found but the filesystem type is unkown
My problem is now solved in the previous thread on this topic. I apologize for a double post! The previous topic was marked [Solved] and I assumed no one would respond there.
I had the problem trying to boot from usb: boot device not showing up after 30 seconds and thrown into ramfs$. The other topic w/ this problem is marked solved so I'm posting my problem again (sorry).
cat /proc/scsi/scsi shows that device is detected...
did:
ln -sf /dev/sdb1 /dev/archiso
and logged out ("exit")
but immediately a new error, and kernel panic, so I can't copy/paste output:
"ERROR: /dev/archiso found but the filesystem type is unkown"
Sorry about ridiculous pic but it does show kernel panic, just trying to help... couldn't copy output. I can post dmesg from prior to kernel panic if you want (but it doesn't include errors).
Thank you for your help.
I just did:
cat /lib/udev/rules.d/00-archiso-device.rules
ACTION=="add|change", SUBSYSTEM=="block", IMPORT{program}="vol_id --export $tempnode"
ENV{ID_FS_LABEL_ENC}=="ARCHISO_OINGAE2I", SYMLINK+="archiso"
"SYMLINK+=" ... is "+=" typo?
Last edited by jaf777 (2009-08-12 17:13:36)Same issue:
The specified store provider cannot be found in the configuration, or is not valid. ---> System.ArgumentException: Unable to find the requested .Net Framework Data Provider. It may not be installed.
You mention "Sounds like the client system doesn't have an Oracle client installed."
I am using Win Server 2008 R2. I have installed what i think is the right client. How do i tell?
What is the right client? Where do i get it? -
i am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. And then reboot your computer.
See if that fixes your problem. -
why some iphone 4s has korean letters at the back and not the same with the most iphones..but the serial and software are all the same..so why there is phone with korean letters on the back it says.. kcc -cmm- apa -a1387..i purchased one and really worried about this..is this original or not..but all the software etc are all the same with other iphone..just that korean letter at the back
I bought it in some mall here in our place..im from philippines.. im worried about this coz its different with other iphone at the back.. it says designed by apple in california..then its all korean letters at the bottom it says KCC-CMM-APA-A1387..i checked both serial number from the phone in the box and in the sim card slot and its all match, i checked it also in apple service and support coverage and it says : valid purchase, your product is eligible...and it shows i have 90 days technical support,and my repair and service coverage is active....pls help what model of iphone is this its working and i can sync to itunes,icloud and etc..thats what it says on the back on the image ia
-
Im really confused. My ipod was giving the 13019 error message. I followed the steps, and it stopped giving me the error code but my music wont appear on my ipod. Any suggestions? Please help
Are you saying that the "Music" app is not present on your iPod Touch? Perhaps there is an issue with the restrictions on the iPod? If you're absolutely sure that the Music app is not present I would consider creating a backup of your iPod after syncing it with iTunes. I would then consider restoring it if this is the case.
-
my itunes won't work so i tried reinstalling and when it starts an error pops up that says:
"the feature you are trying to use is on a network resource that is unavailable. click ok to try again, or enter an alternate path to a folder containing the installation package 'Itunes.msi' in the box below
please help, its frustratingfirst, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you! -
HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem
HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer. -
Can anyone explain to me why my health app tracks my steps daily accurately but the weekly and daily AVERAGES it provides make no sense to me
I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Maybe you are looking for
-
IC Webclient starts with problems
Hi all, I'm new in IC WEB, especially in version 5.2. The question is I tried to launch IC Web client (transaction se80->test) as I used to do in 5.0, but It doesn't show neither navigation bar nor IdentifyAccount view, I mean, it only shows the
-
Can't drag Livetype Icon over to FCP - fix?
Hi Haven't used my FCP for over a year - using it today...I thought I used to be able to simply drag my Livetype (1.2) file from Livetype over to FCP 4.5...now it doesn't work, I'm sure I used to do this...I grab the Livetype icon on top the canvas i
-
Will my studio 17" lcd monitor work with a Mac mini Intel Core Duo that I plan on ordering soon? will I need an adapter? Intel Mac Mini Mac OS X (10.4.7)
-
Yet another Base64 encoder / decoder
Hi, I would like introduce a different Base64 encoding scheme which yields slightly more compact results when encoding international characters. This is an implementation of BASE64UTF9 encoder and decoder. Common practice converts Jav
-
when opening my webmail page on talktalk it tells me I have undifined mail and will not open it! In internet explorer I can access it with no problems but as I prefer firefox I am now stuck!