Some errors about spatial objects during upgrade to 9.2.0.8

Hi all,
I installed the 9.2.0.8 patch and upgraded my 9.2.0.7 database to 9.2.0.8 and got some error messages, ORA-29832 and ORA-29844 when the scripts were updating some Spatial objects. The database seems to work properly however after the upgrade, including the Spatial operations. Do I need to worry about those messages? In some 10g upgrade documents, it said similar messages could be ignored. Did I just miss the same information somewhere in the 9.2.0.8 documentation set?
Regards,
Matti Siren

Try to compile the database objects with the utlrp.sql script, verify the version left by the upgrade process at the DBA_REGISTRY view.
~ Madrid.

Similar Messages

Error in transaction KEA0 during upgrade

Dear All,
During upgrading the custmer system from 4.7 to ECC 6.0 we found some error in the transaction KEA0 while trying to activate the cross client for an operating concern.
The activation logs says that there are the syntax errors in the gereted subroutine pool: RK2O0100.
I however corrected the error and activated the code but again when I am trying to execute the same it gave me the same error and when I go to the sub routine pool I found that the changes are again undone and the previos version is activated. This happens repeatedly that the code is corrected and activated by me and says no error and ones I log off and login again it says the same error.
Help will be appriciated.
Thanks iin advance....
Abhi...

Dear Raymond,
Thankds for your help..........
I tring to run RKEAGENV it shows the error message with STOP button saying that the field WTGBTR not contained in the nametab for table CE1E_B1 and when Io run RKEAGENF it gives a short dump saying that entry for CE10100 is not allowed for TTABS.....
Please help.

To get some errors about group policy due to disabled an account

Hello
I have an active directory on windows 2012 datacenter. there is a domain on it. it works well.
Also there is a another AD on another location. there is another domain on it. also it works too.
there is a trust relationship between 2 domains.
I disabled an account on first AD server 4 days ago. and then my colleague who manages second AD, notified that started to recieve some errors from eventviewer and have an issue about their group policy.
the issue event as below;
The processing of Group Policy failed. Windows could not authenticate to the Active Directory service on a domain controller
(LDAP Bind function call failed). Look in the details tab for error code and description.
Event ID 1006
Event Source Group Policy
I think the concerning account was built on the second AD for a service. But we don't know how we can find the account on the second AD server in order to change it.
How can I fix the issue?
Thanks

Hi Yavuz,
>>But we don't know how we can find the account on the second AD server in order to change it.
What account did we disable? We can check the error code (displayed as a decimal) and error description fields of Event ID 1006 to see if more information can be found.
Regarding Event ID 1006, the following article can be referred to for more information.
Event ID 1006 — Group Policy Preprocessing (Active Directory)
https://technet.microsoft.com/en-us/library/cc727283(v=ws.10).aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Errors when 'Updating Objects' during migration from r2 to 3.1 FP1.8

Has anyone seen errors like this the Update Objects error log file. I've done 5 or 6 test migrations, and before it was normally working fine, but a couple of times I would get thousands and thousands of rows in the log file such as this:
ID     Object     Path     Error
1000023     1000023     ...
1000029     1000029     ...
1000036     1000036     ...
1000069     1000069     ...
1000070     1000070     ...
1000075     1000075     ...
1000107     1000107     ...
1000116     1000116     ...
In testing, there doesn't seem to be much of an indication of any problems, except that recurring schedules don't work after the upgrade, which is a big deal for us as we have about 1000 of them.

I can't tell what the compiler is complaining about. I tried a version of your code sample:
struct Error { Error(int); };
struct Warning : public Error {
    Warning(void) : Error(-8) {}
struct Warning_NoNewMilestones : public Warning {
    Warning_NoNewMilestones(void) { }
int main()
    throw Warning_NoNewMilestones();
It compiled without complaint using C++ 5.12 (Studio 12.3).
There are always two possibilities: The code is OK and you hit a compiler bug, or the code was always invalid but the earlier compiler did not catch the error. Since you seem to have a variety of error messages, the most likely scenario is that the new compiler is catching more errors in your code.
In general, there is no option to have the compiler accept invalid code. In rare cases, where the error is harmless, or when other compilers typically accept the invalid code, we have an option to allow the code. Please review the list of compiler options in Appendix A of the C++ Users Guide.
Oracle Solaris Studio 12.3 Information Library
If the reason for an error message is not obvious, you can post a (preferably small) example that can be compiled to show the error message. Someone in the forum can then probably explain the error, or verify that you hit a compiler bug.
Here is an example of the badbinaryop error message:
% cat z.cc
struct S { };
int main()
    S s;
    int j = s + 3;
% CC z.cc
"z.cc", line 5: Error: The operation "S + int" is illegal.
1 Error(s) detected.
I hope the reason for the error is obvious in this case.

Error in phase START_SHDI_FIRST during upgrade to ECC6

Hi Expert,
When I upgrade from R3 46C to ECC6NU on Windows server 2003 64bits with SQL SERVER 2005 64bits, in phase START_SHDI_FIRST, it is failed.
Here is the log:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Tue Apr 08 17:18:28 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno      01
M sid        BXT
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    80
M intno      20050900
M make:      multithreaded, ASCII, 64 bit, optimized
M pid        2516
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 2516) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          20608     (896)
M DpShMCreate: sizeof(tm_adm)          4663200     (23200)
M DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
M DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm)          552064     (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1496)
M DpShMCreate: sizeof(wall_adm)          (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010610050, size: 5329360)
M DpShMCreate: allocated sys_adm at 0000000010610050
M DpShMCreate: allocated wp_adm at 0000000010611AB0
M DpShMCreate: allocated tm_adm_list at 0000000010616B30
M DpShMCreate: allocated tm_adm at 0000000010616B90
M DpShMCreate: allocated wp_ca_adm at 0000000010A89330
M DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
M DpShMCreate: allocated comm_adm at 0000000010A8F0F0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
M DpShMCreate: allocated gw_adm at 0000000010B15DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B15E20
M DpShMCreate: allocated wall_adm at 0000000010B15E30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Apr 08 17:18:29 2008
M ThInit: running on host shsapsrv05
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C Thread ID:404
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      72
C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SHSAPSRV05
C CopyLocalParameters: dbuser is 'dbo_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
C Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
C Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
C pn_id:SHSAPSRV05_BXT_BXT_SHD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20080408 171829 SHSAPSRV05
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Apr 08 17:18:32 2008
I MtxInit: 21 0 0
M SHM_PRES_BUF               (addr: 0000000017540050, size: 4400000)
M SHM_ROLL_AREA          (addr: 000007FFF3410050, size: 59801600)
M SHM_PAGING_AREA          (addr: 0000000017980050, size: 32112640)
M SHM_ROLL_ADM               (addr: 0000000019830050, size: 598700)
M SHM_PAGING_ADM          (addr: 00000000198D0050, size: 525344)
M ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 0000000019960050
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 7440 bytes (50 server) at 00000000199B0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 21, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
B dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
B dbexpbuf: Buffer ESM   (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
B dbexpbuf: Buffer CUA   (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
B dbexpbuf: Buffer OTR   (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012DFAFB0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
S    using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
A Attached to PXA (address 000007FFF6D20050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
A >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
A >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 23982 bytes at 0000000029EC0050
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
A *** ERROR => TEXTENV_INVALID environment: [ablocale.c   205]
A *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c   211]
A *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c   217]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13168]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Tue Apr 08 17:18:33 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Tue Apr 08 17:18:33 2008
A
A ABAP Program ????????????????????????????????????????.
A Source                                          Line 0.
A Error Code TEXTENV_INVALID.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function DoSetTextEnv Line 225.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Error when generating text environment..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13168]
S *** ERROR => sap_dext: Spoolworkprocess aborted! [rspodynp.c   113]
S T100-key: SY   , type '65'
S variable 0: Error when generating text environment.
S Exitcode 4
S *** ERROR => restarting work process (spool will not work after sap_dext [rspodynp.c   135]
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c   15883]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 4, th_errno 5, action 2, level 1) [thxxhead.c   10169]
M
M Info for wp 21
M
M    stat = 4
M    reqtype = 5
M    act_reqtype = 5
M    rq_info = 8576
M    tid = 21
M    mode = 0
M    len = 2040
M    rq_id = 14
M    rq_source = 1
M    last_tid = 21
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = no VM
M
M Modeinfo for User T21/M0
M
M    tm state = 2
M    uid = 22
M    term type = 0x2
M    display = 0x0
M    cpic_no = 0
M    cpic_idx = -1
M    usr = >SAPSYS      <
M    terminal = >                    <
M    client = >000<
M    conversation_ID = >        <
M    appc_tm_conv_idx = -1
M    session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M    ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M    imode = 0
M    mode state = 0x42
M    mode clean_state = 1
M    task_type = ZTTASPO
M    lastThFc = THFCSPO
M    lastAction = TH_IACT_NO_ACTION
M    th_errno = 5
M    rollout_reason = 0
M    last_rollout_level = 0
M    async_receives = 0
M    cpic_receive = 0
M    em handle = 0
M    roll state = 2
M    abap state = 2
M    em state = 3
M    eg state = 1
M    spa state = 3
M    enq state = 0
M    next hook = T-1/U-1/M255
M    master hook = T-1/U-1/M255
M    slave hook = T-1/U-1/M255
M    debug_tid = 255
M    debug_mode = 0
M    mode type = 0x1
M    debug = 0
M    tcode = >                    <
M    client conversation_ID = >        <
M    server conversation_ID = >        <
M    lock = 0
M    max enq infos = 0
M    act enq infos = 0
M    em_hyper_hdl = 000007FF51285070
M    plugin_info = NULL
M    act_plugin_hdl = -1
M    act_plugin_no = 0
M    max_plugin_no = 0
M    async_receives = 0
M    vm = no VM
M
M Adresse   Offset Data from input buffer
M -
M 0000000010EE2C00 000000 00000000 02000000 4a000000 00000000 |........J.......|
M 0000000010EE2C10 000016 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C20 000032 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C30 000048 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C40 000064 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C50 000080 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C60 000096 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C70 000112 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C80 000128 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C90 000144 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CA0 000160 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CB0 000176 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CC0 000192 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CD0 000208 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CE0 000224 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CF0 000240 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D00 000256 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D10 000272 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D20 000288 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D30 000304 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D40 000320 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D50 000336 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D60 000352 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D70 000368 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D80 000384 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D90 000400 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DA0 000416 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DB0 000432 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DC0 000448 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DD0 000464 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DE0 000480 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DF0 000496 00000000 00000000 00000000 00000000 |................|
M -
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T21/U22/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U22 M0 I0 (Level 7) ok
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
M ThIErrHandle: don't try rollback again
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=1)
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (5)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T21/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
M call ThrShutDown ...
B Disconnecting from ALL connections:
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 021 000 R/3              000000000 INACTIVE     NO YES NO 000 255 255 20080408 171829 SHSAPSRV05
B Disconnected from connection 0
B statistics db_con_commit (com_total=6, com_tx=1)
B statistics db_con_rollback (roll_total=2, roll_tx=1)
M ***LOG Q02=> wp_halt, WPStop (Workproc21 2516) [dpnttool.c   327]
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Tue Apr 08 17:19:07 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno      01
M sid        BXT
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    80
M intno      20050900
M make:      multithreaded, ASCII, 64 bit, optimized
M pid        832
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 832) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          20608     (896)
M DpShMCreate: sizeof(tm_adm)          4663200     (23200)
M DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
M DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm)          552064     (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1496)
M DpShMCreate: sizeof(wall_adm)          (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010610050, size: 5329360)
M DpShMCreate: allocated sys_adm at 0000000010610050
M DpShMCreate: allocated wp_adm at 0000000010611AB0
M DpShMCreate: allocated tm_adm_list at 0000000010616B30
M DpShMCreate: allocated tm_adm at 0000000010616B90
M DpShMCreate: allocated wp_ca_adm at 0000000010A89330
M DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
M DpShMCreate: allocated comm_adm at 0000000010A8F0F0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
M DpShMCreate: allocated gw_adm at 0000000010B15DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B15E20
M DpShMCreate: allocated wall_adm at 0000000010B15E30
X
X Tue Apr 08 17:19:08 2008
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host shsapsrv05
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C Thread ID:3980
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      72
C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SHSAPSRV05
C CopyLocalParameters: dbuser is 'dbo_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
C Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
C Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
C pn_id:SHSAPSRV05_BXT_BXT_SHD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20080408 171908 SHSAPSRV05
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 21 0 0
M SHM_PRES_BUF               (addr: 0000000017540050, size: 4400000)
M SHM_ROLL_AREA          (addr: 000007FFF3410050, size: 59801600)
M SHM_PAGING_AREA          (addr: 0000000017980050, size: 32112640)
M SHM_ROLL_ADM               (addr: 0000000019830050, size: 598700)
M SHM_PAGING_ADM          (addr: 00000000198D0050, size: 525344)
M ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 0000000019960050
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 7440 bytes (50 server) at 00000000199B0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 21, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
B dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
B dbexpbuf: Buffer ESM   (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
B dbexpbuf: Buffer CUA   (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
B dbexpbuf: Buffer OTR   (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012DFAFB0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
S    using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
A Attached to PXA (address 000007FFF6D20050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
A >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
A >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 23982 bytes at 0000000029EC0050
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E
E Tue Apr 08 17:19:09 2008
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T21/U22/M0/I0/V-1
M
M Modeinfo for User T21/M0
M
M    tm state = 2
M    uid = 22
M    term type = 0x2
M    display = 0x0
M    cpic_no = 0
M    cpic_idx = -1
M    usr = >SAPSYS      <
M    terminal = >                    <
M    client = >000<
M    conversation_ID = >        <
M    appc_tm_conv_idx = -1
M    session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M    ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M    imode = 0
M    mode state = 0x42
M    mode clean_state = 1
M    task_type = ZTTASPO
M    lastThFc = THFCSPO
M    lastAction = TH_IACT_NO_ACTION
M    th_errno = 5
M    rollout_reason = 0
M    last_rollout_level = 7
M    async_receives = 0
M    cpic_receive = 0
M    em handle = 0
M    roll state = 3
M    abap state = 3
M    em state = 2
M    eg state = 1
M    spa state = 3
M    enq state = 0
M    next hook = T-1/U-1/M255
M    master hook = T-1/U-1/M255
M    slave hook = T-1/U-1/M255
M    debug_tid = 255
M    debug_mode = 0
M    mode type = 0x1
M    debug = 0
M    tcode = >                    <
M    client conversation_ID = >        <
M    server conversation_ID = >        <
M    lock = 0
M    max enq infos = 0
M    act enq infos = 0
M    em_hyper_hdl = 000007FF51285070
M    plugin_info = NULL
M    act_plugin_hdl = -1
M    act_plugin_no = 0
M    max_plugin_no = 0
M    async_receives = 0
M    vm = no VM
M
M ThCheckPrevUser: reset spa state for user T21/U22/M0
M LOCK WP ca_blk 276
M LOCK APPC ca_blk 92
M set task type ZTTASPO
M ThCleanPrevUser: clean U22 T21 M0 I0 V-1 from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThRollIn: roll in T21/U22/M0/I0 (level=7, abap_level=1, attach_em=1)
M ThCheckEmState: check ATTACH for em hdl 0
M ThCheckEmState: call EmContextAttach (em_hdl=0)
M ThRollIn: U22 M0 I0 (Level 7) ok
M ThRollIn: roll in abap store
M ThIAMDel: delete tid/mode 21/0 (th_errno 23, release 1)
M ThTSCancel: set T21/M0 in status MODE_CANCEL
M ThIDeleteMode (21, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M    no sub modes
M ThSUsrDel: delete system user
M RstrNotifyUserChange: user/client = (SAPSYS      /000)
M ThResFree: free resources of U22 M0 I0 (normal mode, complete free) at level 3, errno=23, db_action=TH_DB_NO_ACTION, pooling=1
M ThResFree: reset spa state for user T21/U22/M0
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >abRtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T21/U22/M0 has no cpic conns
M clean up all internal modes of T21/U22/M0
M call ab_endmode (END_MODE_CLEAR_ALL)
M RstrNotifyUserChange: user/client = (SAPSYS      /000)
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c   1357]
M ThVmcCleanMode (deleteOfMainMode=1, AoS=0)
M ThSesGetSessionType: no associated entry
M ThSesIsJavaSessionId: no associated entry
M ThVmcCleanMode o.k.
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThPageFree: free (22,0,0, mode = 3)
M ThRollFree: free (22,0,0, mode = 3)
M ThRmFree: cleanup resources for T21 M0
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000001068DEC8/0000000000000000/0/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T21 M0
M ThRmFree cleanup resources for T21
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 0000000010693420/0000000000000000/1/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T21
M ThIEmFree: delete hyper context (hyperHdl=000007FF51285070)
M ThIEmFree: call EmContextDelete (em_hdl=0)
M ThResFree: save spa pointer 000007FFF3135B20 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/type/info = 21/0x41/0x0, mode_deleted=1)
M abap strategy ROLL / O.K.
M ThRqOutCheck: o.k.
M ThNewWpStat (type=0x41, task_switch=1, inline_hold=0, hand_shake=0, debug=0, ..)
M ThNewWpStat: new MODE_REC = 0x40
M ThNewWpStat: set mode wait
M ThNewWpStat: new state of T21/M0 = 0x49
M ThISend: new wp stat: 0x2
M rdisp/wp_auto_restart = 0 sec
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThMkReq: send output to canceled mode
M ThDtWpBlk: detach WP ca_blk 276
M ThISend: complete stat record
M ThISend: stat_state = TH_STAT_WRITE
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
M make DISP owner of wp_ca_blk 276
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 49)
M -OUT- sender_id WORK_PROCESS      tid 21    wp_ca_blk   276     wp_id 21
M -OUT- action    SEND_TO_DP        uid 22    appc_ca_blk -1      type NOWP
M -OUT- new_stat WP_WAIT           mode 0     len         8       rq_id 49
M -OUT- req_info CANCELMODE
M REL APPC ca_blk 92
M ThDtAppcBlk: detach APPC ca_blk 92
M PfClearAllRec: clear statistic area
M PfStatDisconnect: disconnect statistics
M ThISend: set inPrivMode = 0 for T21/M0
M ThSysUsrCheck (1,1): check system user T21/U22/M0
M ThIEmFree: em state of T21/M0 (em_hdl=-1) is DP_EM_NO_CONTEXT
M ThSysUsrCheck: clear T21
M DpITmSlotClear: clear slot 21
M DpListRemove: elem 21 not in tmadm_free_list
M DpListInsert: elem 21 already in tmadm_inuse_list
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M TrThHookFunc: called for task switch
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
M save task type/act rqtype ZTTASPO/5 of T21/M0
M TskhLoop: switch back to normal tracel level 1
A
A Tue Apr 08 17:19:27 2008
A *** ERROR => TEXTENV_INVALID environment: [ablocale.c   205]
A *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c   211]
A *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c   217]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13168]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Tue Apr 08 17:19:28 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Tue Apr 08 17:19:28 2008
Please help me out!
Thank you very much!
Edited by: lucy YANG on Apr 8, 2008 11:31 AM

Check to see whether the profile parameter "zcsa/system_language" is set to a value other than D or E in the instance or default profile of the shadow system. If this is the case, change this parameter to D or E. Stop the shadow system and repeat the phase.
How to Stop and Start Shadow sytem :
Stopping the shadow instance
           Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
             R3up (SAPup) stopshd
           Alternatively, you can stop the shadow instance as follows:
             <upgrade_directory>/<SID>/homeshd/< SID>/stopsap DVEBMGS<SHDSYSNO> r3
           where <SHDSYSNO> is the instance number of the shadow system.
Starting the shadow instance
           Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
             R3up (SAPup) startshd
           Alternatively, you can start the shadow instance as follows:
             <upgrade_directory>/<SID>/homeshd/< SID>/startsap DVEBMGS<SHDSYSNO> r3
           where <SHDSYSNO> is the instance number of the shadow system.
Edited by: Shaji Jacob on Apr 8, 2008 4:38 PM

Error in appdstln.sql during upgrade to 12.1.1

Hi All,
I am upgrading my 11.5.9 ebs to 12.1.1 I have gone through all steps outlined in chapter 3 of Oracle® E-Business Suite
Upgrade Guide Release 11i to 12.1.3 Part No. E16342-03. I am now in point number 10 under " Perform the Upgrade" i.e :
Run the American English upgrade patch driver which is (u6678700.drv)
After going through nearly 130,000 jobs I got the following error in appdstln.sql
ORA-01400: cannot insert NULL into("AP"."AP_PAYMENT_HIST_DISTS"."INVOICE_DISTRIBUTION_ID")
Please help me get through this error asap as we are very low on time.

Please log a SR as no similar issues are reported in MOS website.
Thanks,
Hussein

Some error about use AGAL

from the document, the VS and PS have 8 temporary registers (vt0 - vt7 / ft0 - ft7).
when i use vt7 or ft7 in my shader, the flash player throw an error:
[object Exit]
at Function/ccV2OxZn.lto.1.as$0:anonymous()
my test shader is:
VS:
mov vt7 va0
mov op vt7
mov v0 va1
PS:
mov ft7 v0
mov oc ft7
my flascc version: 1.0.1. flash_player version: 11.6

hi Chen,
in addition to the above post
check this
http://help.sap.com/saphelp_nw04/helpdata/en/41/080aab7cefe34d8acb04861a467efc/content.htm
bvr

After updating, i get some error about sounds of notifications

when im using iphone, if a message received, the message sound play twice and it's really disturbing. If this error will be fixed in next update, i will be happy about this situation. Thanks

What version of CC 2014?
Does this happen immediately when you launch AE? At what point in the process does it pop up?
23 :: 40 | Mylenium's Error Code Database

System Tablespace objects after upgrade (mdsys, outln, ctxsys, etc)

I have objects in my system tablespace under listed owners. I believe by default with a new 10g install their home is SYSAUX. Is that correct? Oracle changes the default, but doesn't bother to move the objects during upgrade??!!?!!?!!!

Issue was I didn't know what shoudl be in the SYSTEM tablespace and what shoudl be in the SYSAUX tablespace. And what the default tablespace shoudl be for all these id's. I know I didn't communicate that, but I don't think I realized the full extent of the issue until I did further research, which, undfortunately I did after posting the message.
What I found is;
SYS, some SYSTEM and OUTLN objecst can reside in the SYSTEM tablespace
all others shoudl now be in SYSAUX and SYSAUX shoud be the default tablepsace for them.
SYS and OUTLN use SYSTEM as thier default tablespace, however, I haven't definitively identified the default tablespace for SYSTEM db userid.
Facilities owned by the SYSTEM db userid seem to have been diminished in stature, or maybe just determined to be detrimental to SYSTEM tablespace. I have seen notes in during the upgrae process from 8i to 10g that SYSTEM userid should not use SYSTEM as its default tablespace, but exactly what should be used is not clearly defined.
I support Financials E-BS, and we have migrated from 10.7 on 7.x to 11.5.10.2 on 10g. I am afraid that between patching and addressing user expectations, I have not caught all the nuances and adjustments that have coincided with the database upgrades. We have reached a relative level of stability (OCT and JAN CPU's still need to be applied), so I am looking at performance, database standards (through OEM), and tuning.
Thanks for your response.

About ABAP Object

Hello All,
i have some question about ABAP Object.
What is the meaning of friend class and singleton?
Regards,
Luke

Hi,
The addition Friends makes class class a friend of classes classi and or interfaces ifaci.At the sam time, all subclasses of classes classi, all classes that implement one of the interfaces ifaci and all interfaces that have one of the interfaces ifaci as a component interface become friends of class. you have to specify at least one class or interface.
The friends of a class have unrestricted access to the protected and private components of that class, and can generate unrestricted instances of the class.
The friends of class are not automatically friends of subclasses of class. the addition Friends does not make class a friend of its friends.
Thea ddition global is allowed only when you use the addition public for the global class of a class pool at the same time.You can list other global classes and interfaces from the class library after global friends.This addition is generated when the Class Builder creates a global class and you specified friends at the corresponding tab page of the class Builder.
`
In the example , classs c2 is a friend of interface i1, and therefore also of the implementing class c1. It can instantiate these objects and access their private component a1.
interface i1.
endinterface.
class c1 definition create private friends i1.
private section.
data a1(10) type c value 'Class 1'.
endclass.
class c2 definition.
public section.
interfaces i1.
methods m2.
endclass.
class c2 implementation.
method m2.
data oref type ref to c1.
create object oref.
write oref->a1.
endmethod.
enclass.
Kindly Reward Points If You Found The Reply Helpful,
Cheers,
Chaitanya.

About Order object in ATG

Hi,
I have some confusions about Order object in ATG. Please see -
When actually ATG creates an Order object and how?
Is there any scenario where we should use synchronize on Order object?
An ItemPricingEngine invoked through a price droplet. How/when an OrderPricingEngine gets invoked?
Thanks.

Hi,
Don't get confused that we need to synchronize only those things which are shared between multiple users.
We should synchronize order because there should not be more than one thread/process updating it , else you will get inconsistencies and invalid version exceptions as already pointed by gurvinder.
About your 3rd point :
pricing can be invoked in many ways from many places , like droplet , formhandlers , pipelines etc.
Enable loggingdebug on important components like OrderPricingEngine , ItemPricingEngine , Pricing tools and various Pricing calculators and study the logs then you will be clear on what is invoked and when is invoked.

Could you pls give the details about the Unicode conversion during Upgrade

Hi,
Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
Waiting for quick response
Best Regards,
Padhy

Hi,
These are the few points i gathered during my upgradation project.
Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
So it is advised to keep a back-up of the existing system.
Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
Version Upgrade involves the following Steps.
Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
First copy the entire E4B system into the E1B System which is created for Version 4.7.
Apply the Version 4.7 CD provided by SAP over the E1B System.
Now check whether all the functionalities that was in E4B system works fine with E1B system also.
Thus the Version Upgrade involves two steps.
1. SAP Upgradation with the help of the CD
2. Manual Upgradation.
1. SAP Upgradation with the help of the CD
This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
2. Manual Upgradation.
This Manual Upgradation involves
2.1 Upgradation of Standard Objects
2.1.1 SPAU Objects
2.1.2 SPDD Objects
2.2 Upgradation of Custom Objects.
Upgradation of Custom Objects can be placed under the following three categories.
Unicode Compliance
Retrofit
Upgrade
Please Find below some of the common Unicode Errors and their solutions
1. Error:
In case of Translate Error; Dangerous use of Translate in Multilingual system.
Correction:
To correct the Error occurring on TRANSLATE statement use this additional statement before the Translate statement.
SET LOCALE LANGUAGE sy-langu.
This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is sy-langu, i.e. the log on language of the user.
2. Error:
In case of Open Dataset Error; Encoding Addition must be included.
Correction:
This Error occurs only when the MODE is TEXT.
To correct the Error occurring on OPEN DATASET statement use this statement instead.
OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
Where: dataset_name NAME OF THE DATASET.
Access INPUT or OUTPUT or APPENDING or UPDATE.
DEFAULT - Corresponds to UTF-8 in UNICODE systems &
NON_UNICODE in NON-UNICODE systems.
3. Error:
In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; Function module UPLOAD is flagged as obsolete.
Correction:
The FM GUI_DOWNLOAD/UPLOAD is used.
The variations to be made in the parameters of the FM:
1. Filename It must be of STRING type.
2. Filetype DAT is not used any longer, instead ASC is used.
3. Field Separator The default value SPACE is used, incase for a TAB separated file X can be used.
4. Error:
In case of CURRENCY/UNIT Addition Error; Use addition CURRENCY/UNIT when outputting.
Correction:
The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
To correct this error follow the following method:
WRITE: /3 'TOTAL',' ', TOTAL.
WRITE: /3 TOTAL, , TOTAL CURRENCY 2. --- Where 2is the Currency Key for Getting 2 decimal places.
5. Error:
In case of TYPE X Error; Variable must be of C, N, D, T or STRING type.
Correction:
We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
So the method to be followed is:-
1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
2. Declare the variable as Type C, and use the method UCCP(XXXX) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute HORIZONTAL_TAB of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
E.g.:
i) *DATA: TAB TYPE X VALUE 09, Tab character
CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
ii) * DATA: CHAR TYPE X VALUE 160.
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA CHAR TYPE C.
CHAR = CL_ABAP_CONV_IN_CE=>UCCP(00AO).
(Here 00A0 is the Hexadecimal equivalent of the decimal 160).
3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
E.g.:
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA : LF(2) TYPE X VALUE 'F5CD'.
DATA : BEGIN OF LF,
A1 TYPE C,
A2 TYPE C,
END OF LF.
LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
6. Error:
In case of the Character -Error; The Character -cant appear in names in Unicode Programs.
Correction:
The Character -(Hyphen) appearing in Variable names is replaced by the character _ (Under Score) for Unicode/Upgrade Compliance.
E.g.:
*wk-belnr LIKE bkpf-belnr,
*wk-xblnr LIKE bkpf-xblnr,
*wk-date LIKE sy-datum,
*wk-wrbtr LIKE bseg-wrbtr,
*wk-name1 LIKE lfa1-name1,
*wk-voucher(8) TYPE c.
wk_belnr LIKE bkpf-belnr,
wk_xblnr LIKE bkpf-xblnr,
wk_date LIKE sy-datum,
wk_wrbtr LIKE bseg-wrbtr,
wk_name1 LIKE lfa1-name1,
wk_voucher(8) TYPE c.
7. Error:
In case of The SUBMIT-TO-SAP-SPOOL Error; you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition.
Correction:
1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
2. Call the FM GET_PRINT_PARAMETERS:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
3. Use the SUBMIT-TO-SAP-SPOOL statement.
E.g.:
     submit zrppt500
     using selection-set 'AUTO3'
     with res_no eq lo_rsnum
     with sreserv in preserv
     to sap-spool destination p_dest
     immediately 'X'. "print immediate
DATA: print_parameters type pri_params,
archive_parameters type arc_params,
valid_flag(1) type c.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
Submit zrppt500
Using selection-set 'AUTO3'
With res_no eq lo_rsnum
with sreserv in preserv
to sap-spool
SPOOL PARAMETERS PRINT_PARAMETERS
ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
WITHOUT SPOOL DYNPRO.
8. Error:
In case of Message Error; Number of WITH fields and number of Place Holders are not same .
Correction:
Split the statement after WITH into the same number as the place holder for that Message ID.
E.g.:
1. * MESSAGE E045.
MESSAGE E045 WITH '' ''.
2. in program ZIPI0801
     Start of change for ECC6
     message e398(00) with 'Could not find access sequence'
     'for condition type:'
     p_ptype.
message e398(00) with 'Could not find '
'access sequence'
'for condition type:'
p_ptype.
     End of change made for ECC6
9. Error:
In case of Move between 2 different Structures; The structures are not mutually convertible in a Unicode program.
Correction:
Make both the Data Types compatible and then assign the contents.
E.g.:
The statement move retainage_text to temp_text. Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
10. Error:
In case of no description found; add a GUI title.
Correction:
In this type of error gui title is generally missing so add a GUI title to the module pool.
11. Error:
In case of writing internal or transparent table
Correction:
Write individual fields.
E.g.:
WRITE: / EXT. --> EXT should be a character type field
WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
12. Error:
In case of combination reference table/field S541-UMMENGE does not exist
Correction:
Was due to error in reference table S541. TABLE S541 has errors
1)Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)
2)Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)
Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
And that of ZMKCODE (from ZACCODE to ATTR8)
13. Error:
In case of KEY does not exist
Correction:
The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
14. Error:
Incase of WRITE statement, Literals that take more than one line is not permitted in Unicode systems.
Correction: To correct this error, we need to align the spaces accordingly so that the statement doesnt go beyond the line.
15. Error:
Incase of Data statement, The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect..
Correction: To correct this error, instead of like in the Data statement, use type.
16. Error:
Incase of DESCRIBE statement, DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.
Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
CHARACTER MODE is added when the data object is of flat/ character type.
BYTE MODE is added when the data object is a deep structure.
Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
LENGTH clen IN CHARACTER MODE.
Where blen and clen must be of type I.
17. Error:
Incase of DO-LOOP Error, In Do loop range addition needed
Correction:
An internal tables is declared and the two fields (VARYING field and NEXT field) were
Included inside the internal table
E.g.: In program SAPMZP02
DO 11 TIMES
     VARYING STATION_STATE FROM STATION1 NEXT STATION2. ECC6
CASE SYST-INDEX.
WHEN 1
STATION_STATE = STATION1.
WHEN 2
STATION_STATE = STATION2.
WHEN 3
STATION_STATE = STATION3.
WHEN 4
STATION_STATE = STATION4.
WHEN 5
STATION_STATE = STATION5.
WHEN 6
STATION_STATE = STATION6.
WHEN 7
STATION_STATE = STATION7.
WHEN 8
STATION_STATE = STATION8.
WHEN 9
STATION_STATE = STATION9.
WHEN 10
STATION_STATE = STATION10.
WHEN 11
STATION_STATE = STATION11.
18. Error:
Incase of the parameter QUEUE-ID Error, QUEUE-ID is neither a parameter nor a select option in program rsbdcbtc.
Correction:
The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
E.g.: In program Z_CARRIER_EDI_INTERFACE
     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
19. Error:
Incase of EPC Error, Field symbol <TOT_FLD> is not assigned to a field .
Correction:
This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
The OS Note - 1036943 needs to be applied.
Error:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
Correct:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Error:
Constants : c_tab type x value '09' .
Correct:
Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
Error:
Data : begin of output_options occurs 0 . Include structure ssfcompop.
Data : end of output_options .
Correct:
Data : output_options type standard table of ssfcompop with header line .
Error:
PARAMETERS : NAST TYPE NAST .
Correct:
PARAMETERS : NAST TYPE NAST NO-DISPLAY .
Replace WS_DOWNLOAD and WS_UPLOAD by
GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
Issue:
Moving data from one structure to another structure if those two structures are not compatible
Solution:
we should use move-corresponding or field by filed we need to move it.
If database structures are different in 4.6c and ECC6.0,
Then we should go with append structure concept.
While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
Also Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
Reward points if helpful.
Regards,
Ramya

Errors in DDIC Activation phase during upgrade.

Hi,
Title: Errors in DDIC Activation phase during upgrade.
During preprocessing phase (phase ACT_UPG) we got many DDIC activation errors such as:
SAPup broke during phase ACT_UPG in module MAIN_SHDRUN / Shadow System Operations: SPDD and Activation.
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCI702.CPE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO519 "Data Element" "/BI0/OICH_AT" could not be activated
1EEDO519 "Data Element" "/BI0/OICREA_TIME" could not be activated
1 ETP111 exit code           : "8"
We have searched the SDN, many posts say that we have to just activate them. But my question is where - in source system OR in Shadow system?
We assumed it is Source system (please correct if it is wrong), unlocked the system and logged in as normal user and tried to activate the Data Element. Now, it says "Search Help /BI0/OICH_AT is not active or contains no parameter".   How to go about it?
If it is Shadow System, how can i unlock the system?
Many thanks,
Mohan.

Dear Mohan,
There are search helps configured for the dataelements in ACTUPG.ELG. These search helps were created by mistake by the system.
The search helps can be deleted manually in the shadow instance.
In this case you should remove these fields in se11 (in your shadow instance) as the Search help shouldn't exist.
You should do this step for all data elements shown in the log ACTUPG.ELG:
For example: SE11 -> /BI0/OICH_AT -> Change -> Tab "Further characteristics"
1. Goto SE11:
2. Select Data type and fill "/BI0/OICH_AT" and display
3. Select the tab "Further Characteristics" and
4. Remove the values for fields "Name" and "Parameters"
   then click on icon "Activate"
Please do the same for the other object.
But before performing above steps you need to unlock the shadow instance by the following command:
SAPup unlockshd <SID>
(if using SAPup)
SAPehpi unlockshd <SID>
(if using SAPehpi)
Also do not forget to lock the shadow system again after performing the steps and continuing the upgrade by the following command:
SAPup lockshd <SID>
(if using SAPup)
SAPehpi lockshd <SID>
(if using SAPehpi)
You can logon to your shadow system with any different user than DDIC.
Best Regards,
Abhishek
Edited by: Abhishek Srivastava on Oct 17, 2011 6:26 PM

Error during Upgrade from 4.6c to ECC 6.0

Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar K

Hi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar

Display an error message in Portal during creation of Object Link

Hi,
I have a requirement where I need to throw an error message in Portal during creation of Object Link.
The requirement is whenever the user clicks on Item and try to create a Object Link for Material-Plant combination, if the Mat-Plant combination exist, than I have to throw/display an error message.
I tried for some enhancements in BAPI_BUS2172 but it does not work out.
Please help.
Thanks in advance.
Arbind

Hi,
If you include the UI, it will display at the top of the screen..
Please see below how to create a message in the message editor.
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
and this is how you access the error message in the application ti display it to the end user
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Ganesh N

Some errors about spatial objects during upgrade to 9.2.0.8

Similar Messages

Maybe you are looking for