Some Errors in Images....
Hello,
I have bouhgt my N79 in nov. 2009 it is awesome phone...but i got some problem in images when i take images using zoom after some days the same images shows blue icon in the place of imges and if i try to delete them it shows Genral error...i cant understand why this is happening is this happening beacause of zoom or anything else. I have formatted my phone some days before to remove all those problmatic images but yesterday i took some images and again some images showing the same problem. Plz tell me the right solution...
Akhil
Show Large Images is a preference inside of Acrobat which might be disabled.
Acrobat - File > Preferences
Similar Messages
-
Uploading image file using tcode se78 occuring some Error
Hai Gurus
I am uploading image file using tcode se78 but while Uploading it giving some error i cant resolve the problem so any one help me plz
Error "Graphic LOGO could not be saved (2LOGO)"
Regards
SelvendranHai
Thanks
I had done in all method but i can't save it
error is coming ..so plz help me to upload the image
Error "Graphic LOGO could not be saved (2LOGO)"
Regards
Selvendran -
Burn error (disc image)
All of a sudden, iDVD 5.0.1 won't burn a disc image. Gets to some point through the process (might be half way, might be right through), then says, "Burning completed. Some errors were found during the burn process". Doesn't create any file at all. Have tried buring a few different projects, with the same result.
Any clues?I am having exactly the same problem. My iDVD project started in iPhoto as a "saved slideshow". I have followed all of the steps as provided in two 3rd party manuals -- Jim Heid's "iLife '05" and David Pogue's "iMovie and iDVD 5 -- the Missing Manual". I have even done a "Project Archive" file as the basis to burn the iDVD to ensure that all the resources are together and available. My project consists of a 24 minute slideshow comprised of 230 photos all with "Burns Effect" panning and zooming and with a background music track. This was sent to iDVD from the iPhoto commands. The "Memories" theme was applied with text modification, changes to the font style text location and color, and changed audio selection. A second slideshow was added which consisted of an archive of all the photos used in the original, plus some added ones that were not used. This added a second button on the main menue with three sub-menues on a secondary menu, where the photos were automatically broken down by iDVD into three groups of photos of less than 100 each for a total playing time of approximately 6 minutes (1 sec per photo). The project was then saved and archived. Everything plays fine up to this point. The total memory of the saved archived project file is 2.86 Gb. The rendering and processing time for iDVD to create the disk image (.img) file exceeded 5 hours. I've tried to generate the disk image three times. Like Jim White, in one case after nearly 3 hours, the program put out an error message saying that errors had been encountered and the processing was being aborted. In the two other cases, the processing went the complete 5+ hours; gave a message that the "burning was finished, but that some errors had been found (on verification?) and produced NO FILE.
I am using a Mac G4/1.25 Ghz MDD , Mac OS-10.4.2 with 768Mb RAM and 13.5 Gb of available hard drive storage at the beginning of disk image processing; with iPhoto 5.0.4 and iDVD 5.0.1.
I have no experience with earlier versions of iDVD, so I can't say if this is a problem created by the 5.0.1 update, or the upgrade to Tiger. In any case, this is extremely poor error coding, especially considering the amount of time required for the image processing -- i.e.to state after 5 hours that an error was found which aborts or invalidates the burn without providing any clue as to what or where the error was -- this makes the entire software package of virtually NO VALUE.
Your comments, please! -
Editing Error - This Image cannot be rendered for editing...
Editing Error - This Image cannot be rendered for editingbecause Aperture doesn't support the image format.
Thats the message that appears when I'm exporting to Photoshop CS5 (I tried CS4 too), or even other Plug-ins such as Silver Efex Pro...
That had never happened before, and I use Aperture for over 2 years.
Its RAW image format from the same camera and all, nothing has changed. just randomly decided not to export anymore to other programs, Regular exporting works, so it's nothing to do with exporting it self, but the communication between aperture and other softwares, I think.
I've seen some other people having the same problem, does anyone have a take on it, in how to solve this? I can't edit anymore outside of aperture. (of course not including the idea of exporting and doing everything away from aperture, which is totally not viable with the amount of content to be edited and not being in aperture anymore.)
I've tried deleting the preferences, tried repair permissions of the Library, and still didn't work.
Didn't go to the other 2 options (repair and rebuild database) because it would take days if chosen, and still not sure that would solve. or if has anything to do with.
Any light anyone?What kind of file is it? (i.e.jpeg, Canon RAW, Nikon RAW etc..)
As a workaround until you get the issue fixed, why not reimport the image from the original file, lift and stamp any adjustments you've made in Aperture, and see if the same problem occurs?
A -
What happened to some of my images? Lightroom/Photoshop won't read them.
Hello,
I only shoot Nikon Raw, Using Lightroom to make adjustments and exports. I am using Windows 7.
I use an external card reader and always copy everything directly to my computer first, then Import to Lightroom. I then reformat the memory card, so I can use it again.
I have never seen this before in my images.
After Importing Into Lightroom, on some of my images, (a few scattered instances) I'm seeing something that looks like this , an exclamation mark in a black circle that says;
Under Library Tab: "Lightroom has encountered problems reading this photo", "You will not be able to make adjustments to the photo"
Under Develop Tab: " An unexpected end-of-file occurred"
Any Image, that has that icon on them, In Lightroom, I cannot make ANY edits or exports.
The file size looks right, I can see what the image looks like. I tried opening the image in Photoshop, but I get the same error message; " An unexpected end-of-file occurred"
Why can't these images be accessed by my photo editing programs?
Is the file corrupted ?
Did it happen in file transfer, or by a faulty memory card?
Can I save the images?
What can I do to prevent this from ever happening again?Hello,
Thank you for your replies,
I do put myself at blame. I did not make sure that all the images were successfully imported. I just copied everything and away I went.
This is a first for me. I did not think that such a thing could happen, I thought for sure that if anything like this were to happen, that an error message would pop up saying something like "some of your images did not copy properly".
Knowing all of this, am I doomed? Is there nothing I can do? Perhaps there's some debugging tool?
There's gotta be something, it cant be a total right off, can it? Is there some method of recovery?
I really appreciate your replies,
Thank you very much -
Nouveau doesn't start with some error messages
I have Samsung NP300V5A laptop, with GeForce GT520MX installed. After nouveau installation I saw some errors I've never seen before, and I didn't find anything useful on the web on that matter. Any suggestions appreciated.
dmesg|grep nouveau:
[ 11.002437] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d9110a1
[ 11.002439] nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
[ 11.002440] nouveau [ DEVICE][0000:01:00.0] Family : NVD0
[ 11.003658] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 11.051772] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 11.051774] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 11.051839] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 11.051840] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 11.051842] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 11.051843] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image...
[ 11.051844] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 11.051845] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image
[ 11.065308] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22
[ 11.078877] nouveau E[ DRM] failed to create 0x80000080, -22
[ 11.092800] nouveau: probe of 0000:01:00.0 failed with error -22
lspci|grep NVIDIA:
01:00.0 3D controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev a1)
/var/log/Xorg.8.log:
http://anonymousdelivers.us/44377
lsmod|grep nouveau:
nouveau 916214 0
mxm_wmi 1467 1 nouveau
wmi 8379 2 mxm_wmi,nouveau
ttm 64499 1 nouveau
drm_kms_helper 35090 2 i915,nouveau
video 11170 3 i915,samsung_laptop,nouveau
drm 223731 5 ttm,i915,drm_kms_helper,nouveau
i2c_algo_bit 5391 2 i915,nouveau
i2c_core 22774 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau,videodev
button 4701 2 i915,nouveau
Last edited by JediKnight (2013-04-08 23:33:18)Try to remove nouveau and use instead the nvidia driver, see if it solves your problem.
If you use nouveau because you absolutely want an free driver, then I can't help you, I never used it myself . -
Uncaught error fetching image: java.lang.NullPointerException
Hi everybody,
I am developing standalone application using NetBeans,the aplication is running fine in netbeans IDE but not when Jar alone tried to run.I kept all the files related to application with the jar.
when running jar,the app is running fine upto some extent,and throwing exception at the time of fetching images from images folder which is placed inside "src folder"
class files package and images folder are in the src folder. the code is like this:
mLogo = new JLabel();
URL lUrlLogo = getClass().getResource("/images/eaze.gif");
System.out.print(lUrlLogo);
Image lLogoimage = Toolkit.getDefaultToolkit().createImage(lUrlLogo);//.getImage(lUrlLogo);
ImageIcon licon = new ImageIcon(lLogoimage);
mLogo.setIcon(licon);i tried by using Mainclass.class.getResource("/images/eaze.gif");
and also by using thread but dint solved
The exception is like this:
Uncaught error fetching image:
java.lang.NullPointerException
at sun.awt.image.URLImageSource.getConnection(URLImageSource.java:99)
at sun.awt.image.URLImageSource.getDecoder(URLImageSource.java:113)
at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:240)
at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:172)
at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136)don't specify an absolute path line "/images/eaze.gif" but use a relative path like "images/eaze.gif" or you might need the complete package path.
-
Some errors in HOST.VI+ni 5640R
Hi sir/Madam.
i am Sreenivasulu.i have some issues on generating modulation signal.
i developed HOST and FPGA VIs for single tone successfully.But i am unable to develop for modulated signal.Here i am sending both VIs for single tone and modulated signal.
In single tone HOST.VI i used ni5640R DAC configure for single tone mode.vi
In modulation HOST.VI i used ni5640R DAC configure for Quadrature mode.vi,here i am getting some errors.i am attaching that errors image also(test_mod_errors.jpg).
Please go through this and correct me.
If i want use ni5640R Input and Output example project for my application(generating modulated(AM,QPSK,BPSK,4-FSK and OOK) signals) what are the main changes i have to do in HOST and FPGA VIs.
Thanks & regards,
Sreenivasulu.O
Attachments:
test_mod_errors.JPG 143 KB
file_VI.zip 592 KBHi Sreenivasulu
Concerning the test_mod1(HOST).vi.
You need to create IQ data; I refer to the previous links on what IQ waveform data is.
You are starting out with the AM Message Signal.vi. This VI basically creates an IF signal, basically an AM signal at an IF (or carrier) frequency. Then you pass this signal to the MT Modulate AM (DSB).vi. You are taking a baseband signal and IF carrier, and creating a baseband (IQ) signals that is now going to have your basic message signal and the IF carrier modulate another carrier. Passing this signal to the MT Upconvert Baseband.vi then takes the IQ signal to upconvert and adds a carrier. This signal is no longer an IQ complex signal, but a real signal at this point, and not suitable for downloading to the IF-RIO.
The code should look something like this modification of the ni5640R Analog Input and Output (HOST).vi this:
This uses the Sine Waveform.vi and the MT Modulate AM (DSB).vi VIs.
Based on the code that you had, I really believe that it is in your best interest to learn some signal processing theory, and specifically IQ complex waveforms. The previous references are a good start.
Saving a NI 5640R project to another name. When I opened your host VI, the VI was still looking for VI associated with a .lvlib file that is still named for another project. One of the steps in the renaming project is to open the Host VI as well as the ni5640R VI Tree.vi. Then rename the .lvlib file. This will ensure that the name change is propagated through the project VIs.
In the ni5640R Analog Input and Output example project, the IQ complex waveform is created in the Host. (In the example, the waveforms have been saved as constants.) This waveform has no information concerning the transmit frequency. The transmit frequency is set by the AO.Center Frequency (Hz) front panel control, which eventually sets the NCO frequency on the DAC. The FIFO goes on down to the FPGA code.
Have you looked at the ni5640R Analog Input and Output (FPGA).vi yet? This is where the data goes from the host and then onto the DAC.
Jerry
Message Edited by Jerry_L on 03-12-2008 10:19 AM
Attachments:
AMmod.jpg 88 KB -
"Error downloading image." message when trying to import movies.
I recently just about filled up my iPhone 4's memory with videos shot from a family event. I noticed that just before I reached the memory's capacity that the videos started to drop frames then stopped recording.
When I try to download the videos I get an "Error downloading image." message. I'm running the latest OS and the latest version of iPhoto.
Any ideas? I hate to have to delete the videos without saving them.
Thanks!Launch Image Capture and see if it can see and download the iPhone's videos to the Desktop. There are some apps, like iPhone Explorer and iPhone Photo Transfer that might be able to download those files to the Desktop,
You can find them by searching for "iPhone" at MacUpdate.com.
Happy Holidays -
Error: Boot image to update:
Error: Boot image to update:
Microsoft Windows PE (x64)
Add ConfigMgr binaries
Add custom background
Enable Windows PE command line support
Add drivers
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ESB2 SATA RAID Controller
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ESB2 SATA RAID Controller
Intel(R) 4 Series Chipset Processor to I/O Controller - 2E00
Intel(R) 5000X Chipset Memory Controller Hub - 25C0
Intel(R) 5400 Chipset Memory Controller Hub - 4000
Intel(R) 82852/82855 GM/GME/PM/GMV to Processor I/O Controller - 3580
Intel(R) 82855PM Processor to I/O Controller - 3340
Intel(R) 82865G/PE/P/GV/82848P Processor to I/O Controller - 2570
Intel(R) 915G/P/GV/GL/PL/910GE/GL Processor to I/O Controller - 2580
Mobile Intel(R) 915GM/PM/GMS/910GML Express Processor to DRAM Controller - 2590
Intel(R) 945G/GZ/GC/P/PL Processor to I/O Controller - 2770
Mobile Intel(R) 945GM/GU/PM/GMS/940GML/943GML and Intel(R) 945GT Express Processor to DRAM Controller - 27A0
Intel(R) 946GZ/PL/GL Processor to I/O Controller - 2970
Mobile Intel(R) PM965/GM965/GL960/GS965 Express Processor to DRAM Controller - 2A00
High Precision Event Timer
Intel(R) 5100 Chipset Memory Controller Hub - 65C0
Intel(R) 6702PXH PCI Express-to-PCI Bridge A - 032C
Intel(R) E7230/3000/3010 Processor to I/O Controller - 2778
Intel(R) 7300 Chipset Memory Controller Hub - 3600
Intel(R) E7520 Memory Controller Hub - 3590
Intel(R) E8500/E8501 Hub Interface - 2600
Intel(R) 631xESB/6321ESB/3100 Chipset Serial ATA Storage Controller - 2680
Intel(R) 631xESB/6321ESB/3100 Chipset Serial ATA Storage Controller - 2680
Intel(R) 631xESB/6321ESB/3100 Chipset USB Universal Host Controller - 2688
Intel(R) Q35 Express Chipset Processor to I/O Controller - 29B0
Intel(R) 82801EB LPC Interface Controller - 24D0
Intel(R) 82801EB Ultra ATA Storage Controllers
Intel(R) 82801EB Ultra ATA Storage Controllers
Intel(R) 82801EB USB Universal Host Controller - 24D2
Intel(R) 82801FB LPC Interface Controller - 2640
Intel(R) 82801FB Ultra ATA Storage Controllers - 2651
Intel(R) 82801FB Ultra ATA Storage Controllers - 2651
Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
Intel(R) ICH8 Family Thermal Reporting Device - 284F
Intel(R) ICH8 4 port Serial ATA Storage Controller - 2820
Intel(R) ICH8 4 port Serial ATA Storage Controller - 2820
Intel(R) ICH8 Family SMBus Controller - 283E
Intel(R) ICH8 Family USB Universal Host Controller - 2830
Intel(R) ICH9 Family Thermal Subsystem - 2932
Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920
Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920
Intel(R) ICH9 Family SMBus Controller - 2930
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH10 LPC Interface Controller - 3A10
Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A00
Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A00
Intel(R) ICH10 Family SMBus Controller - 3A30
Intel(R) ICH10 Family USB Universal Host Controller - 3A64
Intel(R) 31154 133MHz PCI TO PCI Bridge - 537C
Intel(R) QuickPath Architecture I/O Hub to ESI Port - 3400
Mobile Intel(R) 45 Express Chipset Series Processor to DRAM Controller - 2A40
Windows Hardware Error Device
Intel(R) 4 Series Chipset Processor to I/O Controller - 2E00
Intel(R) 5000X Chipset Memory Controller Hub - 25C0
Intel(R) 5400 Chipset Memory Controller Hub - 4000
Intel(R) 945G/GZ/GC/P/PL Processor to I/O Controller - 2770
Optional components:
Scripting (WinPE-Scripting)
Startup (WinPE-SecureStartup)
Network (WinPE-WDS-Tools)
Scripting (WinPE-WMI)
Intel(R) QuickPath Architecture System Address Decoder - 2C01 - Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
The SMS Provider reported an error.: ConfigMgr Error Object:
instance of SMS_ExtendedStatusYes as others have said you hardly ever need to inject drivers now into your boot images. There are exceptions to this i.e. Surface Pro USB Ethernet Adapter drivers and some of the newer 2014/2015 Ethernet adapter drivers from Dell and Lenovo. You certainly
don't need to inject all the drivers from a driver folder source as it appears from your post.
If your having problems with no network after you boot into your image just inject the Ethernet drivers only.
If your using WinPE 5 - Use the Windows 8.1 Ethernet Driver (irrespective of what OS your trying to deploy)
If your using WinPE 4 - Use the Windows 7 Ethernet Driver (irrespective of what OS your trying to deploy).
Cheers
Damon -
Uncaught error fetching image? Help appreciated.
Hello. I'm currently working on a simple game that is quite similar to Minesweeper. There are 25 JPanels that show an image when they are clicked, the object being to find all the gophers. Everything is working fine, but for some reason I'm getting an error when an image tries to load. This happens randomly throughout the game, with some loading and then crashing when the error appears. The error I get is the following:
Uncaught error fetching image:
java.lang.NullPointerException
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at sun.awt.image.FileImageSource.getDecoder(FileImageSource.java:35)
at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:240)
at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:172)
at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136)I'm currently using a modified version of Random that someone created, that makes sure values in a certain range are not repeated, to assign strings containing the image file's name randomly across the JPanels. Here's the method that I'm using to assign the strings:
public void Generate() {
for(int i = 0; i <= 24; i++) {
if(i < maxGophers)
imageName = "gopher.jpg";
else if(i < maxGophers+maxWolves && wolvesJCheckBox.isSelected())
imageName = "wolf.jpg";
else if(i > maxGophers)
imageName = "hole.jpg";
switch(generator.getNextInt(26)) {
case 1: panel1 = imageName;
break;
case 2: panel2 = imageName;
break;
case 3: panel3 = imageName;
break;
case 4: panel4 = imageName;
break;
case 5: panel5 = imageName;
break;
case 6: panel6 = imageName;
break;
case 7: panel7 = imageName;
break;
case 8: panel8 = imageName;
break;
case 9: panel9 = imageName;
break;
case 10: panel10 = imageName;
break;
case 11: panel11 = imageName;
break;
case 12: panel12 = imageName;
break;
case 13: panel13 = imageName;
break;
case 14: panel14 = imageName;
break;
case 15: panel15 = imageName;
break;
case 16: panel16 = imageName;
break;
case 17: panel17 = imageName;
break;
case 18: panel18 = imageName;
break;
case 19: panel19 = imageName;
break;
case 20: panel20 = imageName;
break;
case 21: panel21 = imageName;
break;
case 22: panel22 = imageName;
break;
case 23: panel23 = imageName;
break;
case 24: panel24 = imageName;
break;
case 25: panel25 = imageName;
break;
} // end switch
} // end for
} // end method Generate{code}This is the code I'm using to load the images once the JPanels are clicked:
{code:java} imageIcon = new ImageIcon(panel1);
image = imageIcon.getImage();
Graphics g = blankJPanel1.getGraphics();
g.drawImage (image, 1, 1, blankJPanel1);{code}There's also a JButton that draws all the associated images on all the panels, but that gives the error as well, drawing only some until it encounters it.
I'm quite sure this isn't the most efficient way to go about it, so I'm open to any changes and suggestions. Thanks to anyone who can help!There are 25 JPanelsYou need to hold them in an array. All that panel1, panel2, ... panel25 business is a waste of time and space.
java.lang.NullPointerExceptionSo something is null that shouldn't be.
imageIcon = new ImageIcon(panel1);
image = imageIcon.getImage();
Graphics g = blankJPanel1.getGraphics();
g.drawImage (image, 1, 1, blankJPanel1);i.e. one of those variables. -
Error converting image get error msg when trying to display thumbnail
Hi there
Me again
I am having some problems displaying thumbnails
I keep getting the error
Error converting image (create thumbnail). The "...........public_html/productimages/thumbnails/" folder has no write permissions.
So I go to my host and change write permissions on the files to 755 and try again and get the same msg
Then I contacted my host and changed the permissions to 777 and I went to the includes config file and changed the permissions to 777 too and still does not work
So I go to my cpanel and check all the files are set to 777 I make a new test page with a dynamic table and show thumbnail behavior and get the same error msgs
So I close DW restart and try again and get the same msg.......
So then I check the file permissions in the DW split screen window when connected to server..... I right click on some files on my server.... namely the 'thumbnails' file and check its permission and it is only set to 755 but in my host it is set to 777
So I try to change ppermissions from DW and get the
"setting access properties failed for: ' error
So what is the correct permissiion..... 755 or 777?
I have read two other posts on this forum and I still cant get to work
Does anyone have any ideas
I have used up all my options and most of my patience
I hope I can get this working asap....
Have a nice dayTry going through the steps in this document:
http://support.apple.com/kb/TS1539
CG -
Adobe Photoshop CC, But now it showing some error. We are having trouble verifying your membership.
Sreejith Technograph Oman wrote:
any body have same error?? and how you solved
What error? You don't even describe the error.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Developer Details:
Image upload error. Error resizing image: Error converting image (image resize). The "" folder has no write permissions. (IMG_RESIZE)
User Error:
Image upload error. Error resizing image.
tNG Execution Trace - VIEW
tNG_update.executeTransaction
STARTER.Trigger_Default_Starter
tNG_update.doTransaction
BEFORE.Trigger_Default_saveData
tNG_update.saveData
BEFORE.Trigger_Default_FormValidation
tNG_update.prepareSQL
tNG_update.executeTransaction - execute sql
AFTER.Trigger_ImageUpload
tNG_update.afterUpdateField - frumorsimg, Fimg1.gif*
tNG_update.getRecordset
tNG_update.getFakeRsArr
tNG_update.getLocalRecordset
tNG_update.getFakeRecordset
does anybody know why this happens?
My folders are 777. The image is being uploaded.
If I turn off the resizing the page loads fine.
The error appears when having the resizing or when displaying a thumbnail.
Please help!!!!
Thank youI am not a php guy but just trying to help out..
1. check what u have configured in the control panel of ADDT for image resize.
2. i have heard something called GD is used. or image magick.
3. in asp i use image magic.
the image resize will use some temporary directory..
ur webserver will run as some account so ..
it should have write permission on this temporary directory.
and the library u specified it to use for resizing should also physically exist.
and ofcourse the anonymous webuser account should be able to create process to resize this image. -
We have encountered a problem importing images that we have exported from another instance of HTMLDB. Operating systems match (DOS - and it is selected from the combobox on export), application ID-s match, any non-latin characters are removed from image names, but upon last step of importing those images to our test database HTMLDB instance, we get the following message:
Error installing image.
Return to Application
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-00922: missing or invalid option
---------------------------------------set linesize 250-- begin wwv_flow_image_api.remove_image( p_image_name => 'top-bar-conf.gif', p_flow_id => 100); wwv_flow_image_api.remove_image( p_image_name => 'top-bar-logout.gif', p_flow_id => 100); wwv_flow_image_api
What could be wrong? Or where do I send the export file for closer inspection?
KajaFor a few months these exports/imports have worked perfectly, the problem occurred for the first time last week.
I don't know how to export only some images from the workspace (except for the choice between workspace images and specific application images), but when I deleted other than first two images from the export file (in my texteditor deleted others from remove part and also from the insert part of the image export file), then the import was successful - so it must be something about those other files.
Maybe you are looking for
-
HP Officejet Pro 8600 N911g always cannot print and scan after turn on the Mac from sleep
Dear Community: This is my printer: 1. Product Name and Number Product Name HP Officejet Pro 8600 N911g Product Model Number CM750A Product Serial Number {Private Information Removed} Service ID 23022 Firmware Version CLP1CN1150CR Total Page Count 4
-
Hi I want to send a mail to the user if he successfully submits a record .how to send the mail from ABAP .please help . urjent.
-
Jbuilder use weblogic6 as web server
hello i integrate the jbuilder6 with weblogic6,write a simple servlet,right click it,select "web run",it throw a "stringindexoutofboundsexception",as follow: C:\JBuilder6\jdk1.3.1\bin\javaw -classpath "C:\bea\wlserver6.1\lib\weblogic.jar;C:\bea\wlser
-
Hi I would like to know of there will be a new release with an iphone this fall along with iOS 8
-
Software update lost photos in iPhoto library
I have read many threads but still have yet to find the golden answer. No, my time machine was NOT working so no back-up. I have spent 2 days recovering some from Stellar Phoenix. Is there anything left to do? Are my photos from the last 3 years gone