Some essenfiles not installed
Trying to install Tiger 10.4.3 on my iMac g3 and during installation it fails. Looking at the logs it says
"Install failed: some files for essential may not have been written correctly"
I have used that same computer for tiger ever since tiger came out up until 10.4.6, and now it crashed and won't install at all.I'm doing a clean install.
Already tried the RAM thingy and no luck.
Do I need a new hardrive. cause i have tried this like 10 times and same problem everytime.
I did try techtool 4 pro. formatted using disk utility and checked with tech tools. its all fine.
A new formatted disk shouldn't have any problems anyway right.
let me recheck one more time.
Similar Messages
-
CC says some apps not installed yet they are. :((
Downloaded and installed CC2014 with all the GB's required. Yet its still asks me to install again, only three apps are up to date. The rest all appear with install next to them. I can open them and run them. But I am sure they won't update without being under my apps. Very boring I don't want to have to reinstall all the apps again. Any ideas please.
James please utilize the steps in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html to restore the ability to update your installed applications.
If there are currently updates available that you are unable to apply then it is likely you will need to remove and reinstall those applications. -
i recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help
I don't think you're on iOS 5, I think you're using iOS 6. That's the latest version.
Unless you've used iCloud to back up your documents, you won't be able to restore them. And for future reference, you don't have to uninstall Pages to update your iPad anymore. Sorry about this. -
Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1
-
I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-ins were still presented but no programs opened, of course. after reinstalling the plug-ins one of the programs appeared twice in the list but not the others. I´m going to reinstall them again and I´m wondering if there is anyway of erasing the links to the plug-ins under "photo" and "edit in" ???
Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia -
Some applications are not installed by MDT
Hi!
I'm deploying Windows 7 32bit and most of my applications are installed by MDT, after the image is droped on the target machine. I found myself facing a very odd situation for which I couldn't find an explanation or solution:
- "sometimes" (and that it's a key word), when I dropped the same image using the same task sequence on the same type of hardware (lets 20-30 computers), on some machines all the applications will be installed, and on others I'll miss 1, 2 (usaully
the same ones) or sometimes more and I'm not refering to the situation when the TS was interupted and it's aking you if you want to continue. The TS will finish without any error/warning messages but those apps will not be on all the machines.
Did anyone had a problem like this? Can you help me please with any information/solutions regarding it?
Thank you!
PS My MDT version is 6.1.2373.0No, the TS is not being interrupted, this was what I was saying previously. The TS will finish, without throwing any message but sometime, some applications won't be installed. If I go to the log files (BDD or ZTIApplications) I can see an error code about
those apps, but if I don't check the log files or look to see if all my apps came down well, I won't receive any notification from MDT that something didn't work well (and once, one of my coleauges sent me a log file were it was saying that one app was installed
succesfuly , but he couldn't find the app. I'm still very intrigue by that log file. Maybe it was sent by mistake from another computer).
From what I research and talked with other people I think, most of the time, the situation is caused by an app that starts to install, but it takes more time and after awhile MDT is thingking that it finished and it's moving to the next app. And when is
doing that, some time (especialy if the server is not busy), the other app(or apps that are comeing after it) is not installing at all. I said most of the time, because sometime, this problem will start to maifest before reaching that troublemaker app (again,
when the server is busier than usual).
What I've done until now, to limit the damages, was to put that app last on the list. If it won't install, at least won't affect others. I'm still working on it to make it works always! :) -
Some of the drivers from the os x disk are not installing properly?
I recently use bootcamp to partition my hard drive. Windows XP installed just fine. I inserted the os x disk like it says to do in the instructions. It told me I needed an updated installer but failed to update. I went into the contents of the CD and began to install the drivers individually. Now some drivers, like the i-sight camera one, did not install properly and im ok with that. But, the ATI drivers, and the Nvidia drivers, the ones I need to play many games (the whole reason I partitioned my hard drive) did not install properly. They installation processes told me that it did not detect the correct drivers for the installation and would now shut down (the nvidia one) and the ATI one failed from almost the beginning but attempted to finish the installation, and failed agian. Any suggestions, ideas, or comments on how I could fix this problem or install these drivers another way would be greatly appreciated!
(sigh) bumb, come on? doesn't anybody have an idea?
-
When downloading Adobe Premier pro fails, write that the installation is complete, some optional components are not installed correctly. What to do?
check your install logs for the problem, http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
-
Some devices are not installed
Hello:
I think that I already installed all the drivers in my W520 but it still showing that some devices are not installed
In "Other devices" I have the folowing four entries:
- Base system device
- Biometric Coprocessor
- F5521gw
- PCI Serial Port
Could someone help me to identify which drivers I still need ??
Thanks for the help.
Regards.
Solved!
Go to Solution.Hi Turco:
Download the "System Update" application from this link, install it, and run it.
This Lenovo application will then fetch the four missing items you list and install them automatically. It will also check to make sure all the other drivers are up to date.
The 'biometric coprocessor' is probably the fingerprint reader. The 'F5521w' is the cell phone modem. I don't know what the other two items are.
If you need a list of all the drivers available for your machine, you can get it (and the drivers themselves) from this link, which is the Device Driver File Matrix (DDFM) for the W520.
But, honestly, it is a heck of a lot simpler, easier, and faster to just download "System Update" and let it do all the work for you. In fact, you might even have that application on your computer already - just click on the Windows 7 orb (the coloured ball with the flag on it) and type "System Update" into the search box, if it is installed, you will see it appear in the results list. If it appears, click on it and run it.
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P... -
"Installer could not install some files in "/". Contact the software manufacturer for assistance."
What does THAT mean!!! Appears when trying to download the new Itunes!!!
Any ideas??
"Installer could not install some files in "/". Contact the software manufacturer for assistance." ?????????????????????can someone please help!!! I can't install anything on my mac!!! And my iphone isnt even showing up in itunes when i plug it in!
-
My macbook air with snow leopard OS was purchased last year. Recently migrated to OS lion and have also installed Java RE. A Bank website while opening in Java shows one error which window activity shows some applets not opening. But it was fine in snow leopard. Will somebody help?
My macbook air with snow leopard OS was purchased last year. Recently migrated to OS lion and have also installed Java RE. A Bank website while opening in Java shows one error which window activity shows some applets not opening. But it was fine in snow leopard. Will somebody help?
-
"Some updates were not installed"
http://i29.tinypic.com/ziklqq.jpg
So I am trying to installed updates on a Lenovo Desktop 3000 J115.
The message I get is shown in the picture, but I will write it out so this thread shows up in Google:
"SL46.tmp - Common Language Runtime Debugging Services
Application has generated an exception that could not be handled.
Process id=0x390 (912), Thread id=0x38c (908).
Click OK to terminate the application.
Click CANCEL to debug the application."
"Some updates were not installed
The following updates were not installed:
Security Update for Microsoft XML Core Services 4.0 Service Pack 2
(KB954430)
Microsoft .NET Framework 1.1 Service Pack 1"
In the first place I tried uninstalling Avira free antivirus, then installing Norton Antivirus 2009 (full version), but when I restarted it would not launch. I've removed all of my antivirus's at the moment and I want to eventually install Norton after I get the updates installed. But I thought I would ask you guys to see if theres anything I can do before I consider reformatting for the 50th time. I have already googled every keyword I can think of, and this is my last resort. Thanks in advance for any suggestions!.Welcome to the forums
You can try to install the latest version of windows update agent and see whether it solves your issue
http://support.microsoft.com/kb/949104
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
Install error "could not install some modules:"
After I finsihed install I got some errors one was saying somthing exception related to Zip and then after second run I get
Warning - could not install some modules:
Core Modeling Library - The module named com.tomsawyer.module/1 was needed and not found.
Core Modeling Library - The module named org.antlr.module/1 was needed and not found.
I try to reinstall with the option "repair install" and after that I still get the same error.
by the way I installed both jdk and the ide. I have an older jdk still on my computer.Thanks for response!
To start the Application Server, open a terminal
window
or command prompt and execute the following:
asadmin start-domain --verbose domain1 The comand window starts with C:\documents and settings\administrator, should I firstly change it to C:\ ? and how to change to C:\ ?
Or, on Windows, you can choose
Programs -> Sun Microsystems -> J2EE 1.4 SDK -> Start
Default Server No, in my Programs menue, there's no Sun Microsystems.
Says Starting and Stopping the Application Server
chapter of The J2EE 1.4 Tutorial:
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/
I browsed the tutorial, it doesn't provide such a trouble shooting.
Are you sure that you have application server
installed?Ths install procedure was successfully finished without any error message. Also, I can see J2EE is in my Control Pannel\ Add Remove\Program list.
What should I do? Thanks!
Jenny -
When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"
What can i do?
I have Windows 8 and i7 with gtx760
Please help mePlease send me the installer logs to [email protected] from C:\Program Files (x86)\Common Files\Adobe\Installers
The file name would be like: Adobe Photoshhop cc 2014 15.0 <Date>.log
-Pragya -
Why Software Updater does not install some updates automatically?
QuestionWhy Software Updater does not install some updates automatically?
AnswerSoftware Updater only installs security-related updates automatically. Non-security-related updates, and service packs installation are required to be initiated manually via the Software updates tab under the Policy Manager Console.
In Policy Manager 12, a checkbox Show non-security-related updates has been introduced under the Policy Manager Console > Software tab. Unchecking the checkbox hides the following update types:
Microsoft security tools
Non-security updates
Service packs
Note: This checkbox is Policy Manager Console-specific setting. If you change the setting in one Policy Manager Console, it would not affect another Policy Manager Console connected to the same Policy Manager Server.amrok90 wrote:
Updater does not detects 5800. I've reinstalled everything as it's stated (as, according to FAQ, sometimes the drivers may get corrupt). Restarted the PC. Nothing happened.
Presumably FOTA not an option for your 5800XM?
Happy to have helped forum with a Support Ratio = 42.5
Maybe you are looking for
-
Why does my MacBook Pro mid 2010 sound a SOS signal on start-up?
Since last month our MBP mid 2010 started to have boot issues. Sometimes it boots fine 10 times, other times it will take time and patience before you get through the SOS signals. After it is finally started, it will work perfectly and also putting i
-
Is there a keyboard shortcut to open a pop-up menu in Numbers 3?
I have lots of spreadsheets with cells formatted as popup menus. I am accustomed to tabbing from cell to cell, and then tapping the spacebar to open the pop-up menu to select an option. Now it appaers that the only way to open a pop-up menu in Number
-
Open GRPO run time correct report
Query expert, We are using SAP B1 9.0 We need Open GRPO Report run time query Example - We made GRPO on 01/09/14 with 5 line items after that we made A/P Invoice on 05/09/14 with 3 line items If we generate open GRPO report as on 05/09/14 than GRPO s
-
While doing MIGO transaction system showing error: Check table169P the entr
Hi experts, while doing MIGO transaction system showing error: Check table169P the entry BP01 does not exit. pls do needful. Thanks&Regards sreenivas.p
-
Where is the snapshot stored before it is copied somewhere, so that it can be retrieved as an image.
Where is the snapshot stored before it is copied somewhere, so that it can be retrieved as an image. Alternative is to take snapshot and copy into a Powerpoint page and then save page as an image.