Some external number range are not valid for equipment creation

Hi All,
What could be the reason even though the external number range is maintained for equipment category as a combination of ALFA Numeric, for certain combinations, system accepts while creating Equipment and for certain combination of ALFA numeric number, system is throwing error " equipment number not in external number interval".
Waiting for your valuable inputs..
Thanks
Surya

Hi
As your define No. Range is :000AAA-1000 to 000ZZZ-9999.You can Not use No which Involves the Alphbatic Value as "AAA" As it is begaining of your number range .You can Check another upcomimg number which just fall after "AAA" is "ABA"it will accept.Number which come with "AAA" will not accept by system.So you need to start your numbering form the next number of your Define Lower Limit(starting point) value that is "ABA-....."
Regards,
Rakesh

Similar Messages

  • Message no. 8I766 Number Ranges are not maintained For Extended Withholding

    Dear All,
    I am facing the following problem when i am trying to generate the withholding tax certificate
    1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax 
         Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert  (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno  in EWT.
    I have checked all the above tables and found that the entries are maintained
    2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
    > here the following problems are faced
          A) . TDS Number is not coming
          B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
          C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
    Please help me in soving the above issues
    Thanks & Regards
    Arun.R

    Hi
    You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
    Thanks
    GG

  • Funds mngt - Number range 01 not found for object BULI_DOCNR

    Hi all
    need some urgent help to crack an error am getting while creating a budget in funds management.
    the error am getting is
    "Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
    I have maintained the number range in
    Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
    But am still getting the error....
    will really appreciate some help on this
    thanks in advance

    The number range object refers to  "FM budgeting line item number "
    Are you using Former budgeting or BCS ?
    Try t-code- ok11 and ok91 under former budgeting.
    Thanks
    Siva

  • Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

    Hi Gurus,
    When I try to capture deemed export license from J1ILIC01 I get this error
    The number range is not maintained for Object/Year: J_1ILIC/
    I tried to maintain number ranges in SNRO & SNUM  there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

    Hi
    Just check if you have maintained number range for the correct year as shown in error.
    Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

  • The number range is not maintained for Object/Year: J_1ILIC/

    Hello,
    I am facing the problem as
    After Created the No range object j_1ilic for excise bond, for capturing the CT3 form in J1ILIC01 and maintain the required fields in J1ILIC01, following error is occuring
    "The number range is not maintained for Object/Year: J_1ILIC/"
    Kindly advice on the same
    Thanx in advance
    Shailesh

    Hi,
    You will have maintain the Number range for the Lisence for the object J_1ILIC through SNRO.
    Regards,
    Murali

  • TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

    Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file".  Any suggestions?

    Thanks so very much.  I chose MP3 and Download and it is working beautifully.  Have a wonderful day and it is so nice of you to get right back to me.  I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install.  Could hug you!

  • External number Range with leading zeros for Handling Units

    Hi Experts
        My requirement is to use the External number for the Handling Units provided by vendor.That number starts with 2digits"00"+18  for Example:00123456789123456789
      I am Using HU_VEKP Object for no range and maintaining
    External No Range From 00000000000900000000 to 00000000000999999999.
    But When i am giving Number 00000000000900000001 its only taking
    900000001.
    Kindly suggest me the right way to take leading zeros.
    Rewards for answer sure if it works.
    rajesh

    Hi Laksmipathi
                          I am maintaining the number range for External number range coz its vendor supplied HU.
               But the prefix zeros has meaning for identifying the Handling unit Functionality.In realtime IF prefix contains Say "0000" it refers to carton
    If prefix contains say "0010" it refers to pallet.
               So i need to satisfy there requirement.For example If it is for material number we can maintain In OMSL by check box of leading zeros.
                But i am not able to find any setting for this Handling units.U can check this object HU_VEKP in SNRO tcode where i am maintaining Number range.
    Thanks give suggestion
    RajeshS

  • Number range interval not found for object ISH_NLEI in executing NP38

    Dear ALL,
    In executing Transaction NP38 when we save the surgical procedure codes the system
    generates an error message "number range interval not found " . The object referred here
    ISH_NLEI number range has already been defined in spro Define technical number range.
    Please assist what should be done here to resolve the problem.
    Regards
    Ramit

    Hi, check if it maintained in tcode snro for this object

  • Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

    When we try to gather performance counter information for a 32-bit process on a 64-bit computer that is running Microsoft Windows Server 2012, all our performance counter objects are not available with 32 bit perfmon application (C:\Windows\SysWOW64\perfmon.exe)
    I didn't notified any errors while registering our counter objects or while running Perfmon.exe
    Note: Same counter objects are available and working fine with Windows Server 2008 R2.
    for diagnostic our counters on WIN2012, ran command as follows:
     cd c:\windows\sysWOW64
     lodctr /Q
    I am able to see all our counter objects on response and infact all were shown as enabled, as shown below
    Appreciate quiclk response with solution or clues to diagnose it more details.
    Thanks & Regards,
    Sudhakar Rudra

    Hi,
    Thanks for your reply.
    I hope you understood our problem.
    same our system counter objects (ver x), we able to browse from Perfmon 32 bit app on Windows 7, Windows 2008 R2 (64bit) OS but not on Windows 2012.
    I am able to see all counter objects registered as follows (same at HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\HMI Alarm Class\Performance,
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\HMI Alarm Class\Performance
    and
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HMI Alarm Class\Performance)
    Only difference I observed that "Disable Performance Counters" were set to 4 in Windows 2012 OS unlike other windows 7 64bit OS and there is no differnece for remaining all entires.
    I tried setting that "Disable Performance Counters" value to "0", but some how they get reset to "4", no luck..
    I think "Disable Performance Counters" value either "0", or "4", should not matter for browsing our counters with 32bit bit perfmon applicaiton.
    Do you see any issues of registry entries. ?
    On what basis perfomance monitor list few enabled counters?
    How can we add our counters manually to perfomance monitor?

  • "external number assigment is not possible for group 50026340" CV 701

    Hello
    I have tried  to upload routing plan with the program RCPTRA02 and have got this error, I dont understand the reason because this code (50026340) is free, the last one in the tables (PLPO and PLKO) is 50026339.
    This is part of this data estructure.
    a_rc271-recty = '00'.
    a_rc271-tcode = 'ca01'. a_rc271-sttag = sy-datum.
    a_rc271-werks  '0001'.
    a_rc271-plnnr = '50026338'. "Group  a_rc271-plnal = '01'. "Group counter
    Please can anybody help me?
    Thanks in advance
    Best Regards

    Make sence your solution. Thank you
    Now program RCPTRA02 tell me that "Transaction CA01 is unknown", Can you or somebody tell me what may be the problem?
    Thanks again
    Best Regards

  • External Number Range for reservation

    Dear All,
    i want to change the numbering of reservations to external in order to define the number. How can be done??
    BR

    Hi
    External number range can be defined for Reservation.
    SPRO - SAP IMG- MAterial Management - Inventory Management and Physical inventory - Number assignment - Define number assignment for reservations
    T code OMC2
    In this check the external check box.
    Try it out.
    Thanks
    Raman

  • BP External number ranges

    Hi Every One,
       I am trying to give some external number range for BP as group, i had already given the range in IMG and assigned it to the grouping.But still it is not working,could any one please explain me the details ?

    Hi Hari
    I may need some more detail from you on this.
    But I'm guessing you're trying to create the new BP in transaction BP.
    On the right hand side when you create a new BP is the BP Grouping option, once you've selected the relevant Grouping (This should then link to the Number Range Grouping you created), it should then be possible for you to input the relevant BP number which you wish to assign.
    Please advise if you require further guidance.
    Regards
    Arden

  • Why filters are not awailable for my objects?

    Why filters are not awailable for my objects?

    Based on your screenshot preview, I can see that from your Elements panel, you are using an external .html file, correct?
    Some in-app Properties are not available for external, non-managed files.
    If you create a new project (File > New), for example, add an element you will have full access to Edge Animate properties.
    If you create a htm5 doc in Dreamweaver, for example, and open that in Edge Animate then you are limited - because the originating file (.html) is from another application.
    Hope this helps, clarify.
    Darrell

  • How to assign numbers in external number range?

    Dear experts,
    Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
    So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
    Thanks in advance.
    Regards,
    Haris
    Edited by: harissahlan on Oct 19, 2011 5:44 AM

    With external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.

  • External Number Range setting for Equipment Not working

    As per the Requirement I have assigned A00000000000 - ZZZZZZZZZZZZ to an equipment category through OIEN.
    but I am getting the error message in the IE01 screen whenever I try to create an equiment with some external number for this category.
    Equipment category does not allow alphanumeric equipment number
    Can some one help whether anyother settings are needed.
    (It is to be noted that system gives correct error message if I try to create equipment without giving external number - No internal number range defined for equipment category)
    Regards
    Jogeswara Rao

    Hi Jogeswara Rao,
    Check you other post for reply
    Plant Maintenance & Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories >>>> Maintain Equiment Category >>>> select your category and check whether you have ticked "No Alphanumeric Equipment Numbers" or not.

Maybe you are looking for

  • Error when starting the Method of a business Object

    Hi, A Zworkflow is created for Compensation adjustment in 4.7 . It has been moved to ECC 6.0 . A ZBusiness object is created without a keyfield which has a zmethod is created for updating a infotype 380. Its i/p parameter is a workqueue no. which is

  • WBS Element locked or closed?

    Hi All, One of the consultant was rolled out from the project, and we want to remove that consultant from the project. Can you please suggest whether i have to lock the wbs 2nd level or close the wbs element. For further reports i should not want tha

  • Not inventory Items

    I have a doubt in the manage of not inventory items, when I made a Goods receipt PO and I use an item that there is not an inventory item, the column name G/L account appears with out any account select, basically my doubt is if is correct to save th

  • PVIVImageView crash - large image support in 10.6 got MUCH worse

    I have been making lots of panoramas and 10.5 had great support - both Safari and Preview were fast and never crashed due to the large images. As soon I installed 10.6 I was immediately disappointed by the speed - the tiling display thing has problem

  • Acrobat X - You have created an invalid conversion job.."

    I recently purchased a new computer with Windows 7 and have upgraded all my software. I have MSOffice 2010 and the download (trial) version of Acrobat X.  When I prepare a document in MSWord (in either .doc or .docx format) and click on the Create Ac