Some fields in ADF application are responding during playback
Hi All,
I'm facing some issues when playbacks the script which was recorded ADF application. Mainly 3 fields are showing this abnormal behavior. For combo-box `adf.table(..., .....).rowSelect(3);` is used to select value, but it's not working during playback. For date field the date picker I used is not working during playback. One Text field is also showing some issue. Value of text field is not get set during playback and it leaves it blank and passes the run. There are also other fields, including many Text fields, but all of them are working except the 3 above mentioned..
Please help me, if any one knows solution for this. Even if you don't know solution please share your ideas.
Regards,
Deepu
You give us no clue about what you used to record/playback scripts
Similar Messages
-
I am still uing iMovie09. When I try to export movie some of share parts which are fine during editing, become very shaking. What should I do?
Thank you so much...
1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds. -
Some of the open applications are not shown
Hello!
I upgraded my MBA2011 from Lion to ML via the appstore.
Some 3rd party apps do not show up in the dock nor the task switcher (cmd-tab).
Also if they are statically added to the dock, they do not show the "open app" indicator
(which is really really bad visible in ML)
I can see the processes in the "end task (alt-cmd-esc)" and can use this to switch
in between, but thats not really userfriendly.
I think I read that there are some changes regards to non signed apps.
I did not find any setting in the control panel or the finder, anyone a top how
* how to show all apps in the task switcher in the dock?
* how to make the open-app indicator more visible?After I posted this, this showed up as a suggestion:
https://discussions.apple.com/message/17723048
The "killall Dock" works, have to try the
~/Library/Preferences/com.apple.dock.plist
Drag that plist file to the desktop.
Reboot, and your problem should be fixed.
later on -
Some fields in text box are being displayed multiple times
Hi All,
I am getting a strange error in Crystal Reports.
It is displaying a particular field multiple times while the query returns a single row.
I have used a text box in which I have dragged and dropped that field.
The version used to design the reports is Crystal Reports XI while client is having Crystal Reports 11.5.
Regards,
Misra P.Hi Salah,
Thanks a lot for quick reply.
1- I am using SQL queries ,not tables.
2- The field is in page header for one report and in group header for the other one.
3- If i grag and drop simply,then it shows correct result,i.e. a single record.
e.g i am displaying a customer name with title.
Like Mr XYZ(page header,query is returning a single row).
and it is being displayed as
Mr XYZ
Mr
Mr
Mr
Mr
Mr
Thanks again.
Regards,
Misra P. -
Adobe edge application not responding during publish
I dont know why but all of a sudden my file wont publish, or at least I dont think it is because I get the death wheel for a solid 10-15 minutes then give up and force quit the program. It was publishing before, but I dont know if this is just a huge upload or what? Please help..
How do I post the file? Nothing in particular, i just hadn't touched the file in a few days and then added a bunch of new animations/image files to it. I thought maybe it was just taking a long time to update the new changes but im not sure.
-
Audio/Video in sync but session regions are delayed during playback???
So I have a post audio project with 189 tracks. I've worked in sessions this large before and had no problems.... I'm have audio synced to video, which playsback in sync with the picture. However, The regions seem to be off. When I playback and the playhead scrubs across a region it takes a few more frames until it playes the region.... Wow, what a tough thing to describe. It seems liike theres a delay in the session overall but the audio and video are still in sync....
I thought it could be a processing issue but I'm not even coming close to taxing any of the cores....
Mac Pro 8 core
Logic Pro 9.1.8
Thanks in advance.Hi People, i have found the answer to my question and thought i might post the cause so anyone else who gets caught can get it sorted.
The answer ended up being that i had an aggregate device as my audio interface (because i have 2 audio interfaces) and so the audio was being delayed in being processed. So i deleted the device in my Audio MIDI Setup (audio page) and thhus, its all good. Quite painfull after a FC reinstall! Ha!!
Cheers -
Some fields are missing while recording through shdb
Dear Abapers,
I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
Thanks in Advance.hi
i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
ie., The transactions FB60 and f-63 both are meant for Parking.
But we cant do bdc for FB60 Parking. So we do bdc for f-63.
similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
So try to find an appropriate bapi or similar tcode which will suffice ur need
hope its clear.
Regards
Sajid -
Hi Guys,
I was wonderng if you could help me. I have been a FIOS customer for many years and have a multi-room HD DVR and 2 HD set-top boxes. I have always had some problems during playback on some recordings where the picture and sound will skip, but over the last several months some new problems have appeared. Frequently during playback of recorded shows the recording will stop playing and I will get a message on the screen "unable to locate hub". I then have to power off the STB, reboot and when I go to the dvr option I have to refresh the devices before connecting to the dvr again. If this happens while a show is recording then the recording stops and then restarts causing the show to be split into 2 recordings. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. 1 other note that might help troubleshooting is that I can't seem to display the IMG in full screen on the dvr.
Thanks in advance for your help,
Sincerely,
Randy R.uncorrdinated wrote:
Hi Guys,
..I. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. ..
Thanks in advance for your help,
Sincerely,
Randy R.
You can only do 1 playback at a time UNLESS you are playing back from the DVR/HUB. If you want to do 2 simultaneous play backs, one of them must be from the DVR. I ran into this same message when my wife would watch a recorded program in one room and I would try to watch a recorded program in another room. Fixed it by moving the DVR to one of the rooms where the conflict occured most often. As for the "unable to locate hub" message. This was a very common problem about a year ago, which was fixed with a software update. You need to check what version software is on all your boxes. -
Photos not displaying during playback
Hi all
I added a few still photos from my iPhoto library at the beginning of a showreel I am putting together but for some reason some of the photos won't display during playback.
They appear on the timeline just fine but during playback they go black before it returns to the rest of of the video clip where normal play resumes.
I have tried to move the photos, delete then re-add the photos but still nothing.
The photos display perfectly in all other sources and devices.
Any ideas?I am having the same issue.
There are several methods.
Hold option and CMD when iPhoto starts and rebuild the data base, then try grabbing them form iPhoto to iMovie.
Export them from iPhoto to the desktop and drag from desktop to iMovie.
Thats the 2 which I have limped through the last couple of issues I have had with it, but now I am having no luck at all with an of the solutions (check my recent post about this issue and Apples lack of sh*ts given about it), there are listed the solutions I have tried.
Hope this helps... -
I noticed recently that more songs are stopping during playback for a few seconds in both my 4th generation iPod touch and my new iPad2. Very annoying. Any suggested fixes for this? Thanks!
I should mention, it was on low power as I was using it.
-
Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4
Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
SOME FIELDS OF WORK AREA ARE CONVERTED TO ***** AT AT NEW STATEMENT
HELLO
SOME OF THE FIELDS OF WORK AREA ARE CONVERTED INTO *********** AT AT NEW STATEMENT .FIND BELOW THE CODE
*& Report YTEST_OBJECTS7
REPORT YTEST_OBJECTS7.
Program Description
Author.........: Jitendra Dash *
Creation date..: 17/09/2010 *
GAP ID/FS Id...: *
Transport......: *
Description u2026..: *
CHANGE HISTORY u2013 Should be completed in reverse date order *
Revised by........: <Developer name> *
Change date.......: Date of creation> *
CR/Defect No......: <Change Request No>/ <Defect#<xxx> *
Transport.........: <Request No> *
Description.......: Description about modification *
Data Declaration
TYPES: BEGIN OF gx_input,
NEMI TYPE EXT_UI,
DIVISION TYPE SPARTE ,
DATE TYPE ERDAT,
DATE1 TYPE ERDAT,
END OF gx_input.
TYPES: BEGIN OF gx_input1,
NEMI TYPE EXT_UI,
DIVISION TYPE SPARTE ,
DATE TYPE ERDAT,
DATE1 TYPE ERDAT,
int_ui TYPE INT_UI,
ANlage type anlage,
SERVICE TYPE SERCODE,
SERVICEID TYPE SERVICE_PROV,
SPARTE TYPE SPARTE,
END OF gx_input1.
TYPES : BEGIN OF gx_euitrans,
INT_UI TYPE INT_UI,
EXT_UI type EXT_UI,
END OF gx_euitrans.
TYPES : BEGIN OF gx_eservice,
INT_UI TYPE INT_UI,
SERVICE TYPE SERCODE,
SERVICEID TYPE SERVICE_PROV,
SPARTE TYPE SPARTE,
END OF gx_eservice.
TYPES : BEGIN OF gx_inst,
int_ui TYPE INT_UI,
ANlage type anlage,
END OF gx_inst.
TYPES : BEGIN OF gx_ever,
ANLAGE TYPE anlage,
EINZDAT TYPE EINZDAT,
AUSZDAT TYPE AUSZDAT,
VERTRAG type VERTRAG,
vkonto TYPE VKONT_KK,
END OF gx_ever .
TYPES : BEGIN OF gx_fkkvkp,
VKONT type VKONT_KK,
GPART type GPART_KK,
END OF gx_fkkvkp.
DATA : GIT_INPUT TYPE STANDARD TABLE OF GX_INPUT,
git_euitrans TYPE STANDARD TABLE OF gx_euitrans,
git_eservice TYPE STANDARD TABLE OF gx_eservice,
git_inst TYPE STANDARD TABLE OF gx_inst,
git_ever TYPE STANDARD TABLE OF gx_ever,
GIT_INPUT1 TYPE STANDARD TABLE OF GX_INPUT1,
GIT_fkkvkp TYPE STANDARD TABLE OF GX_fkkvkp,
WA_INPUT TYPE gx_input,
wa_euitrans LIKE LINE OF git_euitrans,
wa_eservice like LINE OF git_eservice,
WA_inst LIKE LINE OF git_inst,
wa_ever LIKE LINE OF git_ever,
wa_INPUT1 like LINE OF git_INPUT1,
wa_fkkvkp like LINE OF GIT_fkkvkp.
DATA: gv_v_localfile TYPE localfile,
gv_g_localfile type string,
gv_g_alocalfile type string,
gv_g_sender type SERVICE_PROV,
gv_g_reciever type SERVICE_PROV.
CONSTANTS : GC_AINP TYPE c LENGTH 50 VALUE '/tmp'.
************Selection screen for input *********************
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE t1.
PARAMETERS : p_rad1 RADIOBUTTON GROUP grp DEFAULT 'X' USER-COMMAND chk,
p_rad2 RADIOBUTTON GROUP grp,
p_file TYPE file_table-filename MODIF ID m1,
p_afile TYPE file_table-filename MODIF ID m2.
SELECTION-SCREEN END OF BLOCK b1.
***************Initialization*****************************
INITIALIZATION.
t1 = text-001.
***Selection of Appl ser and Presen ser for I/P file******
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_rad1 = 'X'.
IF screen-group1 = 'M2'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF p_rad2 = 'X'.
IF screen-group1 = 'M1'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
**F4 help for inputting the Filename from presentation Ser*
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
program_name = sy-repid
dynpro_number = sy-dynnr
field_name = p_file
CHANGING
file_name = gv_v_localfile
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE gv_v_localfile TO p_file.
move gv_v_localfile to gv_g_localfile.
ENDIF.
***F4 help for file on Application Server*******************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_afile.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
EXPORTING
directory = GC_AINP
filemask = ' '
IMPORTING
serverfile = p_afile
EXCEPTIONS
canceled_by_user = 1
OTHERS = 2.
IF sy-subrc = 0.
move p_afile to gv_g_alocalfile.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
START-OF-SELECTION.
IF p_rad1 = 'X'.
*************Upload file into Itab from pres server*********
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = gv_g_localfile
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = '|'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = GIT_INPUT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSEIF p_rad2 = 'X'.
*************Upload file into Itab from Applic server*********
************file should be ; seperated and not tab seper******
TRANSLATE gv_g_alocalfile USING '\/'.
OPEN DATASET gv_g_alocalfile FOR INPUT MESSAGE gv_LC_MESSAGE in TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
DO.
READ DATASET gv_g_alocalfile INTO wa_xls.
IF sy-subrc IS NOT INITIAL.
EXIT.
ELSE.
APPEND wa_xls TO git_xls.
ENDIF.
ENDDO.
ENDIF.
close DATASET gv_g_alocalfile.
ENDIF.
SELECT INT_UI EXT_UI from EUITRANS
into CORRESPONDING FIELDS OF TABLE git_euitrans
for ALL ENTRIES IN GIT_INPUT
WHERE ext_ui = GIT_INPUT-NEMI.
SElect INT_UI
SERVICE
SERVICEID
SPARTE from ESERVICE
into CORRESPONDING FIELDS OF TABLE git_eservice
FOR ALL ENTRIES IN git_euitrans
where INT_UI = git_euitrans-INT_UI .
SELECT INT_UI
ANLAGE from euiinstln
into CORRESPONDING FIELDS OF TABLE GIT_INST
FOR ALL ENTRIES IN git_eservice
WHERE INT_UI = git_eservice-INT_UI.
LOOP AT git_eservice into wa_eservice.
READ TABLE git_euitrans into wa_euitrans
with KEY int_ui = wa_eservice-int_ui.
IF SY-SUBRC = 0.
READ TABLE git_input into wa_input
WITH key NEMI = wa_euitrans-EXT_UI.
IF SY-SUBRC = 0.
READ TABLE GIT_INST into WA_INST
with key int_ui = wa_eservice-int_ui.
IF Sy-subrc = 0.
wa_input1-NEMI = wa_input-NEMI .
wa_input1-DIVISION = wa_input-DIVISION.
wa_input1-DATE = wa_input-DATE.
wa_input1-DATE1 = wa_input-DATE1.
wa_input1-int_ui = wa_eservice-int_ui.
wa_input1-anlage = WA_INST-anlage.
wa_input1-SERVICE = wa_eservice-service.
wa_input1-SERVICEID = wa_eservice-serviceid.
wa_input1-SPARTE = wa_eservice-sparte.
Append wa_input1 to git_input1.
ENDIF.
ENDIF.
ENDIF.
clear : wa_eservice,wa_input,WA_INST,wa_euitrans,wa_input1 .
ENDLOOP.
SELECT anlage
EINZDAT
AUSZDAT
VERTRAG
VKONTO from ever
into CORRESPONDING FIELDS OF TABLE git_ever
FOR ALL ENTRIES IN git_input1
WHERE anlage = git_input1-ANLAGE
and EINZDAT = git_input1-DATE
or AUSZDAT = git_input1-DATE1.
Select Vkont Gpart from fkkvkp
into CORRESPONDING FIELDS OF TABLE git_fkkvkp
for ALL ENTRIES IN git_ever
where Vkont = git_ever-Vkonto.
LOOP AT git_input1 INTO wa_input1 .
IF wa_input1-SPARTE = 01 .
CASE wa_input1-SERVICE.
WHEN 'FRMP'.
gv_g_sender = wa_input1-SERVICEID.
WHEN 'LNSP'.
gv_g_reciever = wa_input1-SERVICEID.
ENDCASE.
ELSEIF wa_input1-SPARTE = 02 .
CASE wa_input1-SERVICE.
WHEN 'FRO'.
gv_g_sender = wa_input1-SERVICEID.
WHEN 'DB'.
gv_g_reciever = wa_input1-SERVICEID.
ENDCASE.
ENDIF.
data : int_ui TYPE INT_UI.
*int_ui = wa_input1-int_ui .
AT NEW int_ui .
READ TABLE git_ever into wa_ever with key anlage = wa_input1-anlage.
READ TABLE git_fkkvkp INTO wa_fkkvkp with key Vkont = wa_ever-Vkonto.
CALL FUNCTION 'ZIN_COMEV_CUSTDETAILNOTIF_OUT'
EXPORTING
Y_SENDER = gv_g_sender
Y_RECEIVER = gv_g_reciever
Y_PARTNER = wa_fkkvkp-gpart
Y_BASIC_PROCESS = 'ZCDNO'
Y_SWITCHNUM =
Y_SEN_LOAD =
Y_INTUI = wa_input1-int_ui
Y_TRANSACTIONID =
Y_DATE = wa_input1-DATE
IMPORTING
X_TASK_ID =
TABLES
IDOC_STATUS =
IDOC_CONTRL =
XYT_ERROR =
EXCEPTIONS
GENERAL_FAULT = 1
NOT_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDAT.
ENDLOOP.
IN THIS PROGRAM AT AT NEW STATEMENT IN LOOP SOME OF THE FIELDS OF wa_input1 IS CONVERTED TO ***** E.G wa_input1-anlage.
pLEASE HELP ME OUTHELLO
My Q is some fields at AT NEW statement turns into *****.Please help me out
TYPES: BEGIN OF gx_input1,
NEMI TYPE EXT_UI,
DIVISION TYPE SPARTE ,
DATE TYPE ERDAT,
DATE1 TYPE ERDAT,
int_ui TYPE INT_UI,
ANlage type anlage,
SERVICE TYPE SERCODE,
SERVICEID TYPE SERVICE_PROV,
SPARTE TYPE SPARTE,
END OF gx_input1.
GIT_INPUT1 TYPE gx_input1.
LOOP AT git_input1 INTO wa_input1 .
AT NEW int_ui .----
>hERE FIELDS OF wa_input1 ARE TURNED INTO *
EX: wa_input1-ANLAGE =******** AFTER AT IN COMMAND.
END AT
eNDLOOP -
Problem DB Trigger and ADF Application for update a field.
I again,
I have a Data Base table as following :
--Solicitudes*
id number not null,
extern_code integer,
delivery_date timestamp( 6 ),
... and more fields
And a Trigger as following :
create or replace trigger update_delivery_date
before update of on Solicitudes
for each row
begin
if ( :new.extern_code = 9 ) then -- I need update the "delivery_date" to the current date and timestamp
select systimestamp into :new.delivery_date from dual;
end if;
end;
The trigger works fine in the DB, but when I update the 'Solicitudes' data base table through the ADF Application, the 'delivery_date' field is updated to different current systimestamp , for example suppose right now is : 19-JUN-*2012** 10.45.30.773000000 PM -04:00 , it field should be update to this date, but it is not update to that date, it is update to : 10-DEC-*1989* 10.45.30.773000000 PM -04:00.
Why is this ?
I put in the SQL Developer's query editor : select systimestamp from dual; and it show me the correct date and time.
That problem occurs only when I update the table through my ADF Application.Marco,
I don't see any issue with ADF in this. Just tried with a dummy table created with similar structure and tried updating it (have a similar trigger as well). It updated with proper timestamp (tried from SQL Developer, AppModule Tester and in jspx page - all same result).
Can you check the system date on the machine where your DB is hosted. I guess you are using different database for testing the query and the app is using a different db.
If not, try creating a simple testcase (as I mentioned in the first line) and see if you are able to reproduce the issue.
-Arun
P.S : I tried this in 11.2.0.1 DB & JDev 11.1.2.0.0 -
How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.
-
I have update my blackberry 8830, after updation some applications are deleted.
I have update my BlackBerry 8830 world edition, after updation is complete, some applications like browser, maps and other applications are removed. i have set my menu to show all but these apps are also not shown in hidden. but when i see in applications these apps are there but not coming in my menu, how im gonna use these apps now? please reply.
Thanks!
ShahrukhHello,
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
I am having a problem burning a disc with ITunes. I get a message that I have to download the program again as there are some files that didn't download because of another disc burning program. I am sure this is true as I have Media Player and Nero o
-
Display files/directories of a remote system (RIO) on a host machine (PC)
Hello, Please assume that we are discussing software built on the standard "Labview FPGA Control on Compact RIO" sample project. The host is a standard PC running LV14 Fall edition, the remote system is an sbRIO-9636 having an SD card and a USB HDD a
-
Will new backups erase previously backed up files and pictures on icloud?
I have backed up my iPhone to iCloud's. If I erase my camera roll so I can have room to take more pictures, will the next time I back up my phone erase previously backed up pictures that's already on icloud? Or will it just add new pictures to iclou
-
hi guys I have a small perl prgram which accept two number and print their sum. the following is perl program. $y=<>; $x=<>; chomp($y); chomp($x); $sum=$x+$y; print $sum; when I run it from prompt. It waits for the user to enter two numbers and the p
-
Hi, One of my client having Trading Registration.Have to follow RG23D register.But, they receive the input material as ROH, do some additional process and sale as Output material FERT.During purchasing i capturing excise in J1ig.During sales process