Some functionality in the next Siena refresh

So many of you have been asking when the next major Project Siena refresh is coming and when will we address the key asks from this Forum. Thank you for being patient, but now you only need to wait less than a month – expect it around the end of March.
Many of you were asking for web service read/write – you’ll get it. Same for dynamic calls to services – now, just use a service as you would use any other function.
Several people told us that it takes too much effort to get going when all you want to do is see some images from a folder. OK, now you will just go select a bunch of images from the file system, we’ll create the gallery for you and you won’t need to
enter anything in Excel.
You asked for more documentation. In response, among many things, you’ll get an Excel “fx” functionality – try clicking on the “fx” symbol in Excel, and you’ll get the idea.
We are continuing to improve performance (yes, load time for apps with lots of screens/visuals will go down), usability and richness. So, more later.
Thanks for continuing to build wonderful apps with Siena. We will soon be creating a place where you can more easily share these apps with the community.

On Fri, 7 Mar 2014 22:58:03 +0000, Vijay Mital [MSFT] wrote:
>We are continuing to improve performance (yes, load time for apps with lots of screens/visuals will go down), usability and richness. So, more later.
 Will we be able to open projects created in the current version of Siena and
re-publish and take advantage of new features and performance improvements?
 Will there be portrait mode CSS support and ability to build Windows 8.1 apps?
Above are my important questions, I know you said more later, but...
-- Barb Bowman

Similar Messages

  • How to hide some functions in the menu bar of flash paper

    Do anyone know how to hide some functions in the menu bar of
    flash paper? As I want to show a swf file(converted from pdf) on
    the website without printing function. How can I do it?
    Also, if possible, can anyone know how to hide all functions
    on the menu bar except the logo of flash paper?
    Thank you very much, it is very urgent.

    Here is an article about how to integrate flashPaper into
    Director. It has most of the functions that can be executed on
    flashPaper. Maybe it will help?
    http://www.adobe.com/devnet/director/articles/flashpaper_in_director.html
    and here is all his code
    http://www.mediamacros.com/item/item-1006687373/
    Note: it is for 1.01, but works with 2.0

  • Use 2nd gen apple tv and remote control app on iphones and ipad.  We can control some functions on the apple tv but unable to purchase, access such controls as reset, restart, turn off home sharing, etc.  Home sharing stuck on old apple ID. Please help.

    Use 2nd gen apple tv and remote control app on iphones and ipad.  We can control some functions on the apple tv but unable to purchase, access such controls as reset, restart, turn off home sharing, etc.  Home sharing stuck on old apple ID. Please help.

    That is why I said to restore via iTunes, did you check the link?
    This will put it back to factory settings and you can set it up with the new ID once you reconnect with your HDTV. This is not done via ethernet, as per the link you need to connect to the computer via micro usb. You cannot bypass home sharing.
    FYI: An Apple ID cannot be deleted so the old one would still exist (even if you no longer use the email account it is associated with).

  • Make some functionality at the time of deploying application(jsp/servlet)

    Hi Experts,
    I want to know that, Suppose when ever I am deploying my application or initlizing jsp/servlet page. That time I want to do some operation take example : "At the time of deploying application I want to delete .temp files".
    So what ane where I want to write some functionality.
    If I have to write in xml then in wich tag..?
    And if in servlet/jsp page then where..?
    Thanks in Advance

    You don't program such things. You could use a tool like ANT to do the deployment for you and at the same time you can configure a cleanup task.

  • Adding a functionality to the next button

    Hi,
    In SSHR pages, i need to add a message to display when a next button is pressed in a seeded page.
    But am unable to find the functionality in the CO's for the next button so that i can modify it.
    There are functionalities written for back, saveforlater but not for Next button.
    Can somebody explain me?
    Thnaks a lot

    When the user selects a value from the poplist and moves to thenext page that is pushed to the vo and will be retained when the user navigates back and the AM is retained in all these navigation.
    I donot understand what you are trying to achieve, the user is still in the same transaction and the value selected by him in one step of the transaction is going to be retained through out the transaction. Why do you want the value to be blank again when he uses the back navigation button.
    You can still achieve that by programmatically resetting the value in PR of the page, but I donot understand what you are trying to achieve by doing that.

  • How to check the code source of some function in the portal.

    hi all.
    i have some problem  in the portal.
    i use the ESS in the portal, and now some people can not check their salary.
    i want to check the code source, but i do not know it uses which program.
    can some one tell me the way to check the program.
    best regards.

    If you want to access the source code of any ESS component, you will need access to NWDI. NWDI NWDI = NetWeaver Development Infrastructure, it provide the tools and process to build new / modify existing applications built using NWDS. There are plenty of threads discussing how to set up NWDI, you may search for the same.
    However if the payslip problem is only for some users, it could also be a pdf issue, have you tried running the payslip for those select users within ECC?
    Thanks,
    GLM

  • Petition: Chinese Song and Artist Search Function in the Next ZM Firmw

    Hi Everyone,
    Right now I can search for english song or artist in my ZM, but I have no way of doing the same thing for my chinese songs. It would be great if Creative can implement this feature in future firmware (Non-unicode search ability), maybe using Microsoft IME for input.
    Mutax2003

    I investigated a little bit further the music app and found, that the issue is caused by the "Music Videos" in the Music Collection.
    The MusicVideos are not shown in the list of the search results, but the sound from the MusicVideo is played, when the MusicVideo matches the search criteria.
    I realized that the "out of order selection" for the song to be played, typically happended, when there is a large search selection, e.g. when you search for "love". In my search result for "love" in title, the first song in search results is "After Love (Blank&Jones)". When I select it, it plays correctly.
    The second title in search results is shown as "Cant get enough of our love (Barry White)". When I select it, MusicApp plays "Bleeding Love (Leona Lewis)", which is a MusicVideo.
    When I now select the third title in search results, the second (Barry White) is played. And we have this phenomenon that "some song before the selection" is played.
    So it is a bug how Apple MusicApp performs searching when MusicVideos are part of the collection: In search results the matching MusicVideos are simply ignored and not shown. But when selecting a song from the search results, by clicking at position x in list, this position x is somehow calculated on a (not visible) list including the MusicVideos. With the result that a previous song in list is played.
    Hope that we see a fix in the near future??!
    T

  • Running some functions in the background - Flex mobile

    Hi,
    I have an application which allows the user to take a picture and upload it to the cloud. after the picture is taken, I'm performing some manipulation which takes 10 - 20 seconds. is there a way to do that in the background so it won't affect the user app flow.
    Thanks

    There's no concept of "background" processing or multi threading in Flex just yet.
    In the past I have written processing routines that are processor-intensive, in such a way that they do some processing then stop, allowing the UI to function and then resume them after a moment. Basically, you need to be able to keep the current state periodically and then restart processing via a timed event, picking up where you left off.
    Also be aware that mobile platforms have limited resources and apps can be asked to shut down at any moment, 10-20 seconds of inactivity will not be acceptable on some platforms.

  • AGO Function for the next to Years

    Hello together,
    is it possible to use the AGO - Funktion for Values in the Future?
    It is just the negative usage of the function.
    Regards,
    Stefan

    The actual function itself cannot be used in that way. I had the same issue a few weeks back.
    We achieved this by creating a table at the physical layer using a SELECT command which mapped the future values as we required. Another suggestion that was made here was to use a complex join...
    Re: Obtaining metrics for a FUTURE date (opposite of the AGO function)
    The error I described in the thread I think actually had nothing to do with the complex join as we found it elsewhere in the metadata futher on and it was resolved. I havent had the time to go back and test this...yet.

  • Carry some values to the next page

    Hi Friends,
    i do have urgent problem, below is my requirement -
    1)i have a search page, in that i have delete, update , detail icons to navigate pages.here delete and update OK.
    2)when i click the detail icon in search page , i want carry some fields to detail page.i have a Eo based VO. in that Vo , i am making some fields to join with the other table-these fiedls i want carry to detail page.
    Thanks
    vamshi

    Hi Pratap,
    "I am getting values in log window- where as values are not rendering at application." - means down of the jdeveloper window please observe we have (Message,Embeded OC4J Server, Compiler)
    Process request code:
    String ProgId = pageContext.getParameter("ProgId");
    String ProgName = pageContext.getParameter("ProgName");
    System.out.println("proganme"+ProgName );// this value is coming down of the jedeveloper in my case log window.
    String Product = pageContext.getParameter("Product");
    String BusinessUnit = pageContext.getParameter("BusinessUnit");
    String Region = pageContext.getParameter("Region");
    String ComponentType = pageContext.getParameter("ComponentType");
    String Category = pageContext.getParameter("Category");
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    Serializable [] parameters = {ProgId,ProgName,Product,BusinessUnit,Region,ComponentType,Category};
    am.invokeMethod("initSupDetails",parameters);
    Process FormRequest:NO code.
    I think you got my point.
    Thanks
    vamshi

  • Firefox opens websites, but I cannot perform some functions inside the sites (such as Amtrak scheduling, airline flight scheduling, ebay ask a question of seller, make Best Offer, etc..).

    Not sure that this is a Firefox problem, but I noticed this after I updated to the 36 Version. I also have IE on my computer, only use it to access websites if I am having problems with connecting (to verify if the problem is Firefox or my Charter connection)... I now am unable to access IE. I have Windows XP.

    This issue can be caused by an extension or plugin that isn't working properly or is misconfigured.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem.
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.1 r82
    # Next Generation Java Plug-in 1.6.0_21 for Mozilla browsers
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • Some functionality of the move tool stopped working after Photoshop Elements 12.1 update

    After updating to Photoshop Elements 12.1, the move tool can not be used to drag and drop one photo onto another (when more than one photo file is opened).  Please advise.
    Ted

    This is a new bug with the 12.1 update. If you are in 'Tabs' view then dragging from one tab to another does not shift the image focus so you can never drop. A bug report for it has been created at http://feedback.photoshop.com.
    Workaround is to switch to tiled view (Window> Images> Tile in Expert view) and tile your images side-by-side then you can drag and drop.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Yosemite doesn't work well with Autocad and the trackpad.  The trackpad looses some function

    The trackpad looses some functions with the Autocad.  I can't use the PAN command with the trackpad, I used to work with that command in trackpad when I had the IOS Maverick.  Pleas, check out the problem.
    Regards.

    Do you have this problem with Firefox or Chrome? 
    I think all you can do is let Apple know about this problem that needs fixing
    http://www.apple.com/feedback

  • How do I get the Next Button to appear on a form?

    I have a form built off of a view. I pass a parameter from a report through a link to launch the form with the appropriate values. I would like user to then be able to navigate to the next set of information from the report without having to navigate all the way back to the report. I tried to activate the Next button with the onClick event and doNext function but the button never appears to the user. Thank you for any assistance!

    Samuel,
    The reason that you don't get the "Next" button is that the query that the form is running on returns only one row. Take a look at EXAMPLE_APP.EXAMPLE_SQL_REPORT and EXAMPLE_APP.EXAMPLE_FORM. You'll find that this form also does not show the "NEXT" button when called from the report. However if you edit the report and change the link parameter from empno to deptno, you'll find that the button comes up in the form.
    I guess the best option you have is to create a custom button that simulates the functionality of the NEXT button i.e. have some logic to find out which empno must be the next one and then call the form like this :
    l_empno := <whatever logic you have come up with>
    l_url:=<portal_schema>.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=<module_id of the form>&p_arg_names=empno&p_arg_values='||l_empno||'&p_arg_names=_empno_cond&p_arg_values='||<portal_schema>wwv_standard_util.url_encode('=');
    <portal_schema>.wwa_app_module.set_target(l_url, 'CALL');
    Hope that helps,
    Hsiu

  • Error creating a function using the O2A Cartridges

    Hi, I am using the O2A Cartridges and I have created a new function in the next cartridge OracleComms_OSM_O2A_COM_Billing. Then I have included the function as a order component in the BaseProductSpec.
    At this point when I build all the workspace the next problem is generated:
    Order Model Error - The node /ControlData/Functions [COM_SalesOrderFulfillment] has multiple contributors with different significance set.  Please see the log for further details COM_SalesOrderFulfillment.order /OracleComms_OSM_O2A_COM_Base/model/ORDER Unknown Problem
    The function created has the same significance as the other functions like SyncCustomerFunction.
    I don't know how to solve this problem.  Tell me, if you need more information about it.
    Thanks,
    Juan

    in the TOP Include the statement
    FUNCTION-POOL (<b>Name of function Group</b>).
    is missing.
    to Reach to th eexact point.
    to to attibutes tab of your FM
    double click on Program Name.
    double click on include ending with TOP.
    Declare the statement in the TOP include.
    amandeep.

Maybe you are looking for