Some functions don't work after OS reinstalling on Tecra S1

Hi,
I reinstalled PC I downloaded and installed all drivers. But LAN, USB and PCI flash plus network adapter are not working properly. I mean I did not succeed to install them! Do you know the reason and way how to do it?
Thanks a lot! Raid

Hi
Ok, you description sounds great. You know
> reinstalled PC I downloaded and installed all drivers
But did you really reinstall all the Toshiba drivers? I dont think so.
Usually if you have reinstalled all Toshiba drivers you shouldn't have any problems.
Ok, maybe you have installed the drivers but I think you did it in the wrong order.
I dont know what unit you use but Im 99% sure that you will find a installation instruction on the Toshiba page.
Follow this guide line and you will find the magic key for the solution.
Good luck

Similar Messages

I have spotty signal at my home, so some functions don't work until I leave the house. I noticed on the main screen, it says I have 54 emails, but when I open the app, I only have 4. I powered down and back up. No fix. What gives?

I have spotty signal at my home, so some functions don't work until I leave the house. I noticed on the main screen, it says I have 54 emails, but when I open the app, I only have 4. I powered down and back up. No fix. What gives?

Im having this same problem an my phone is about 3 weeks old. I am not sure about the voice over part though...I have not yet figured out how to work the voice recognition part of the phone...I am such a newbie with this phone. I did the power off/on suggestion, several times. I tried leaving it off for 10 minutes. Tried to reset with the power on/off and home button pressed at the same time. Charged battery. Still makes no difference. You cannot scroll any direction. Have to double click to open apps. Have to double click letters when texting or emailing in order to get the letter in the text box. Can scroll through app choices, have to click on the line with the dots in it and move from page to page. Can't access the settings - > general - > accessibility - because it won't allow me to scroll down to "general".
Anyone help you with your fix yet?

5800 expressmusic functions don't work after updat...

Hi!
I bought my 5800 expressmusic, and was glad for it, until i updated it first time. After the first update all the shortcuts and functoins on the background didn't work. I could live with that, so I waited for the next update.
Now i've updated it again, now the functions didn't work before, they work now, but now the musicplayer don't work probably. I can go into the musicplayer, but when i try to update the library and get the music from my SD card into the player like I used to do.. It only finds about 20 songs of 180 songs..
Anybody now how I can solve this problem?
Thanks

it's usually good to do a reset after an update;
Soft reset (reformat). Type *#7370# and the phone's lock code (Nokia default lock code is 12345). Soft reset wipes the C drive.
If you want to thank someone, just click on the blue star at the bottom of their post

Functions don't work after swf loops

I have a five mouse click functions, each with a different navigateToURL link, and each one appears on a different key frame. The probelm is that once the end of the swf is reached and it loops, it gets stuck on the last function and therefor only links to that last URL.
Is there a way to reset functions at the begining? Or is there a better way to do this?
Thanks.
Code from one of my keyframes:
First_btn.addEventListener(MouseEvent.CLICK,onMouseClickFirst);
function onMouseClickFirst(e:MouseEvent):void
    navigateToURL(new URLRequest('http://FirstLink.com'));

On the button code you are waiting for a particular button to be pressed: myButton.addEventListener, right.This means there's a listener waiting for myButton to do something, in this case it is waiting for myButton to perform a CLICK event. It doesn't matter that the code isn't in the same keyframe as the button itself. If you have your button on the stage and you have given it an instance name, then your function will be called on the click, if your button is within a movie clip on the stage, then you can add to your event listener: myMovieClip.myButton.addEventListener and the click will still register the event.
If you want to create one function that will work for all buttons then you need to do a couple of things to set it up.
Create an object that stores all your buttons in it:
private var BUTTONS = {
        playButton:'PLAY',
        pauseButton:'PLAY',
        prevButton:'PREV',
        muteButton:'MUTE',
        unmuteButton:'MUTE'
Create a function to add the listener:
private function setButtons()
        for(var itm in BUTTONS)
            if(myMovie[itm])
                myMovie[itm].buttonMode = true;
                myMovie[itm].addEventListener(MouseEvent.CLICK, clickHandler);
                myMovie[itm].addEventListener(MouseEvent.MOUSE_OVER, overHandler);
                myMovie[itm].addEventListener(MouseEvent.MOUSE_OUT, outHandler);
Does that help?

Some keybaord keys not working after suspect virus on Tecra A

Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
Problems with this computer was found after scanning with a different antivirus.
Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
Thanks in advance.

Thanks Xardas,
I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
Check out this guys post below found on Kioskea.net - getting close to a year ago...
ms ml - Nov 10, 2009 12:52am GMT
Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
yab - Feb 9, 2010 4:47am GMT
hi did you ever figure this out? i have the same exact problem...
However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
yab ms ml - Feb 9, 2010 7:57am GMT
Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
Incidently - never hear from the first guy again - probably ended up being his scroll lock.
all sugestions welcome - sorry my smily face has no eyes -) guess why!

Some Apps don't work after an upgrade IOS to 6.1.1

Description of the problem with my iPhone 4 after an upgrade from iOS 5.1 to 6.1.1:
Some Apps try to start but stopped immidiatly.
The issue for my case:
Try to find your App trough the App Store on your iPhone.
The status of this App should be open. (but when you try to open it, it won't !!!)
Use the main button to go back to your App and delete it.
Go back to Apps Store and reinstall your App.
Check the progress of the installation.
When the install is done open your App again and it should be working again.
Best regards,
Schotel

Try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.

Button functions don't work AFTER loaded onto website.

Created a document in Indesign 5.0. Created buttons to click to "next page" and "previous page." Exported to interactive PDF, launch the pdf (full screen) and the buttons advance to the next page when clicked. Problem arises when document is loaded on website. Button functionality disappears. See website document: http://www.sonypictures.com/kenko/assets/pdf/2013SPEBenefits.pdf

So when a pdf is launched within a website--it is forced to open in a preview mode...even though I have Acrobat on computers tested with it?
The other interactive functions (like the hyperlinks) are working fine.
When the document from the website is saved to the desktop, it opens in Acrobat and all interactive functions are still there.

Some mailboxes don't work after upgrade to IOS7

I have 3 gmail mailboxes on my ipad. Two of them are corporate (google apps) and one is ordinary gmail. After upgrading to ios7 only one of them is working (one of the corporates). Other two look like inactive in the panel on the left (grey color). I can't open them. But I can see new messages for these boxes in notification center and it's possible to open and read them. But, i can't do anything with them, for example, move to specific folder.
I tried to restart device and tried to reconfigure them. It didn't help.

I've had the same problem in the past. Pulled my hair out trying to trouble shoot it. I just had the same things, and came on here to see if anyone had figured it out.
I was able to fix it the last time. It seemed as though the page had become corrupted somehow. I started fresh and rebuilt the same page, then deleted the original page. The links eventually worked.
It'd be more simple if Apple could just prevent iWeb from arbitrarily changing text color.

Hi i have iPhone 4S and some of the apps i've bought or downloade for free don't work after the last update iOS 6.0.1.Can you tell me why?

I have iPhone 4S and some of the apps I've bought don't work after
the last update iOS 6.0.1
Can you tell me the reason?

most likely the app developer havent made it compatible

After upgrade to os 4 some apps don't work including Apple Store

Upgrade went ok, but took long time. Some apps don't work correctly or crash. e.g. Apple Store app just recycles back to main screen. Starbucks app works for a few seconds then crashes.

I had same problems.
I decided to "downgrade" back to OS3. You can too!
Go to this thread and read about it. http://discussions.apple.com/thread.jspa?threadID=2473976&tstart=0

IPhone 3GS apps don't work after 4.3 upgrade

Some apps like mail, safari, app store, ipod don't work after upgrading to iOS 4.3. itues is up to date and have never had issues before. tried to downgrade to 4.2 but was unable to. Help!

I have the same issue, half the apps no longer work, just stays in 'updating' mode. I've tried uninstalling some but now the app store is freezing. THe ones I am able to reinstall give me error message saying I'm not logging in correctly (I am). I'm guessing some apps versions aren't compatible with the new software but a few I was able to use after the software update and now I can't

Macbook pro 13inch,mid2010 qwertyu keys don't work after upgrade os x Yosemite

macbook pro 13inch,mid2010 qwertyu keys don't work after I upgrade os x 10.10 Yosemite. but it works on keyboard viewer. I'm not sure if it's hardware or software problem, how can I fix it?

Hello there, kipolo.
Great job using the Keyboard viewer to troubleshoot your issue so far. The following Knowledge Base article provides a great checklists of steps to pinpoint the issue a bit further:
One or more keys on the keyboard do not respond - Apple Support
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Some links don't work in Safari

I ran a whole bunch of software updates a while ago (funny, after the entire process, nothing actually updated... I had to run it again later), and somehow, in the process, something went wrong with Safari. Now, some links don't work. It's mostly links in the content portions of webpages. For example, things like the Store/Mac/etc buttons at the top of the Apple site work fine, but things like links in forum signatures don't. I have to open them in a new tab. I tried updating Safari, but it didn't fix anything. I've tested Firefox and Camino and they work fine, but Safari is my browser of choice, so this is pretty irritating. Any ideas as to what's causing this and how to fix it?

You might try installing a fresh version of SafariStand and see if you still have the problem with dead links. I'm not familiar with the 'Quick Search' feature but you could have a look at Glims. Don't try to run both Glims and SafariStand together.

Satellite P200-RT1 - FN keys don't work after downgrade to XP

Hi
I have a Satellite P200-RT1, PSPBOC.
I have downgraded my operating system from Vista to XP.
Now I am having a driver issue, I have installed all of the drivers for my computer. I have installed all of the HotKey utilities for my computer as well and I still have an issue. Some of my FN Key functions don't work. The ESC to F5 Functions work but all of the functions above there do not.
I am really looking for the Display Brightness and Dimmer keys F6&F7 to work, if possible I would also like the F9 key touch pad enable/disable key to work as well, which as of right now they don't.
I was wondering if there is a driver that I am missing and if so which driver is it. I have taken my computer into three computer shops now and no one can figure this out. Please Help ME!
Thanks Ken.

Hello
It seems that your notebook is a Canadian model and therefore you can download the drivers on the Toshiba Canada website:
http://www.toshiba.ca
The problem is that I cant find Windows XP drivers on this website. :(
The only way I know is that you try the drivers and utilities from the European website. Normally the models are very similar and maybe it works. Its worth a try.
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Try to download and install Toshiba Accessibility and Controls (Driver).
Greets

PL/SQL don't work after install Oracle 9204 patch set

I'm using Oracle 9.2.0.1.
some pl/sql don't work after i install database patch set 3 (9.2.0.4).
code--------------------------------
BEGIN
dbms_aqadm.stop_queue(
queue_name => 'WB_RT_SERVICE_QUEUE');
exception
when others
then
null;
END;
error message is: ora-03113 end-of-files on communication channel.
please help. thank you !!

Can you please tell me the soluation of this problem as I am also facing the similar problem ?
Thanks in advacne ?
Regards
Satpal

Some functions don't work after OS reinstalling on Tecra S1

Similar Messages

Maybe you are looking for