Some GIFs and JPGs appearing with yellow "wash" when loading in Safari

Hi,
I've flicked through forums, google, and called my top graphics people but nobody can seem to help, or has ever even heard of, my issue.
Here it is in a nutshell:
Some GIFs and JPGs appear with a yellow "wash" when being loaded in Safari. I can confirm this is happening on 3 different Macs, and even on a PC running Safari.
Safari 3.1.1 on Windows XP
Safari 3.1.2 on Mac OSX 10.5.5
Here's some examples of it occurring:
http://staging.tomatosource.com.au/test/bad.jpg
http://staging.tomatosource.com.au/test/bad.gif
You might need to refresh the page in Safari a couple of times to see the flicker but it's there.
I've tried:
- resaving images with and without "progressive" and "interlaced"
- a variety of different colour palettes
- taking a screenshot of the image, putting back into Photoshop and resaving
Has anybody seen this issue before? Unfortunately I can't go live with this site until I fix this very strange error.
Any comments would be greatly appreciated!
Cheers,
Jase.

Totally independently from your current problem, Safari is cr@p. Dump it.
All Apple applications, from the Finder through Preview and iPhoto to Safari, assign Monitor RGB to ALL untagged images, even if they were created or saved in sRGB.
The only current properly color-managed web browser is Firefox 3.0.1. Just keep in mind that you have to enable color management deep inside the guts of Firefox.
See this existing thread in the Adobe Photography forum:
Ramón G Castañeda, "Beware of using Adobe Web Galleries" #49, 14 Sep 2008 4:52 pm

Similar Messages

  • GIF and JPG become damaged

    I have a weird problem with some GIF and JPG images which I
    use in a RoboHelp project. They appear to get damaged, but I nor
    anyone else changes them. The bottom part becomes scrambled or
    entirely black. The strange thing is that when I put the project on
    my local hard disk, nothing happens, but when they are on the
    server (with RAID disk sytem), then trouble begins.
    Until now, nobody else who's wordking on the server reported
    damaged files, so it seems that I'm the only one so far.
    The trouble began on Sept. 11. Some projects I worked on
    since that day have problem files. Most projects are RoboHelp, but
    there's also a Word-project involved with a damaged JPG-file.
    Anyone?

    Hi Peter
    I've indeed already experienced that some RoboHelp projects,
    mainly large onces, are better run on the local hard disk.
    But this is a different problem I think. The project is run
    locally, which goes well, but when I copy it to the server disk for
    backup reasons, then some GIF-files get damaged after a while,
    while nobody opens the project on the server. When I copy the same
    files to another server's disk, then the files do not get damaged.
    I also have a Word project that has a JPG file that has got
    damaged.

  • I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

    I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    Plus, EXACTLY what are you editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • How can I invalidate everything except .gif and .jpg

    Hi
    I need to invalidate every page except the static objects as gif jpg. Can I create a rule that invalidates everything except gif and jpg.
    Thanks

    currently webcache invalidation does not have the expressive power to describe "anything but".
    however, you can give a list of rules in single invalidation message, each matching one type of pages, such as under particular directory, and with fixed suffix. and the whole list of criteria effectively achieves "anything but".

  • When I import TIF and JPG files with same metadata, only the TIF files are imported. How can I change that?

    I have imported and renamed TIF and JPG files with the same metadata re recording date and time. Only the TIF files are imported, the JPG files remain unimproved. Thus I have in the Finder e. g. 13 image files in the same folder in which Lightroom only finds 10 files. Any ideas for resolution welcome!
    Thanks

    Turn off the option Preferences > General > Treat JPEG Files Next To Raw Files As Separate Photos.  Then do an import again.  It appears that, in this instance, LR considers a TIFF to be a "raw" file.

  • About gif and jpg

    who can give me the website about gif and jpg format?
    thanks guy.

    This is a crosspost.
    Chances are that you won't get a resonable response when you do that. Try reading How to Ask Questions the Smart Way. That will give you plenty of pointers on getting reasonable responses.
    The response in your other post is a literal answer to you question, google is your friend.
    For a direct answer, here's the the Jpeg FAQ. If what you are actualling requesting is "how do I use images in Java" take a look at the ImageIcon class, the javax.imageio package and search this forum for examples. You could also check the How to use Icons in the Java Tutorial.

  • Imovie is in my finder but I cannot open it. I have updated it and it appeared in a window when I swipe up with 4 fingers. Please help?

    imovie is in my finder but I cannot open it. I have updated it and it appeared in a window when I swipe up with 4 fingers. Please help?

    What happens when you double-click the iMovie icon in the Applications folder?

  • HT5439 Has anyone had the Network time and date error with Apple TV when traveling?

    Has anyone had the Network time and date error with Apple TV when traveling?

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • It's like my battery died, blach screen and just appears the "charge symbol" when i connected to  the current

    it's like my battery died, blach screen and just appears the "charge symbol" when i connected to  the current And when it is restored error 1602 on itunes. I'm desperate

    I suppose. I tried with external charger, computer, change the usb port but nothing. But for example when it comes to wanting to restore the registry if it recognizes itune and attempts to restore it but stops and i am getting an error 1602

  • My photos  are in Raw Format when I open in Bridge and they appear very clean but when I transfer them to Photoshop they are full of noise. What should I do to fix the problem? Thanks.

    My photos  are in Raw Format when I open in Bridge and they appear very clean but when I transfer them to Photoshop they are full of noise. What should I do to fix the problem? Thanks.

    are you sure its not just the way you are viewing the photo? you don't even see noise on the preview in Bridge and when I say preview I mean when zooming into the preview window. My thought process being in PS you are zoomed in more

  • Latest i-pod touch wont sync, computer freezes and comes up with error -21 when i pull it out

    Latest i-pod touch wont sync, computer freezes and comes up with error -21 when i pull it out of the usb port

    Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694
    Next I would try placing the iPod in recovery mode and then try restoring the iPod. Note that this will erase the iPod. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Include large .gif and .jpg in pdf reports how?

    hi
    please can anyone enlighten me. i wish to include large(ish) graphics in pdf reports and this works if it is a small gif file of about 5Kb. anything over that fails.
    i have read the document in http://www.oracle.com/technology/obe/hol08/apexprnt/apexprnt2_otn.htm and this works with extremely small gif files ONLY!!
    this is something i need to resolve urgently and would REVERE any solution.
    thanks

    Have the same problem too.
    When i'm creating xlst template larger than 40kb pdf generation fails.
    I damped request data recived by apex_fop.jsp and it shows that there is some (about 50) corrupted bytes between 40kb and 50kb.
    Same problem happens when there are to much data in xml, because it comes together in http post request.
    I suppose that there is some problems with utl_http, that corrupts some of report data. Or the post reques is not well-formed by apex.

  • WAN Miniport (2) suddenly appearing with yellow triangle icon

    Last week I was called to troubleshoot a Lenovo Thinkpad that could not connect to the network. Device manager showed the Realtek NIC, a Centrino wireless adapter, Teredo Tunneling adapter, and six listings for WAN Miniport adapter, all of these items with
    the yellow triangle and exclamation point. It was not possible to update the drivers, because no network connections were available. Even a wired connection would not work. Whenever I tried to run the troubleshooter, I got the error that the Diagnostics Policy
    Service was not running.
    After much googling, I eventually tried uninstalling the network devices and rebooting to have Windows reinstall them. This didn't work, as soon as I tried to use the driver, the yellow triangle came back. Finally I decided to reformat back to factory settings.
    After reformatting, I was able to add the laptop back on the network, with both wired and wireless connections working. In Device Manager there were listings for Bluetooth adapters, the LAN adapter and wireless adapter, and a single WAN Miniport adapter.
    I disabled the option to allow these devices to turn off the computer.
    I was able to browse the network and get online to update software.
    After I left to do something else, I came back and the laptop display was off, so I had to hit power to bring it back. I logged in, and the wireless connection had dropped. I was able to reconnect, but that shouldn't have happened - it's unusual behavior.
    I went to Device Manager and now there are two WAN miniports, and #1 has the yellow triangle and is not working. #2 is working. Again I went to the power options and disabled the option to allow the adapter to turn off the computer.
    Now I am wondering what's going on, and if the problem actually is hardware-related and not driver-related. Why was it working OK yesterday and now I'm getting errors again? Is this possibly a hard drive issue? The laptop is less than 2 years old.
    I'd appreciate any advice.

    Hi,
    Firstly, about "I got the error that the Diagnostics Policy Service was not running.", you could start this service to clear up this message:
    1. Type "Services" in the start menu search box, press Enter.
    2. In the Services window, navigate to the following one
    3. Right click "Start" button to make it running.
    The next, about the WAN miniport issue, do the following:
    1.Open Device Manager.
    2.Right-click the WAN miniport (Network monitor) device, and then click
    Update Driver Software.
    3.Click Browse my computer for driver software.
    4.Click Let me pick from a list of device drivers on my computer.
    5.Clear the Show compatible hardware check box. From the list than select something that can be removed for instance Microsoft -> Generic Mobile Broadband Adaptor. and click next.
    6. Back in the device manager, delete the device that just turned into the “MAC Bridge Miniport” device.
    7. Once done removing the bad miniports, restart the computer.
    Finally, check the result.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • We have a new iPod  Classic and would like some help in choosing "Import Settings" (under Peferences) when loading the iPod from the Mac.  We want to be sure that we can maintain a constant sound level.  Used with Bose sound dock. OS 10.6.8 iTunes 10.6.1.

    Using an iPod Classic on a Bose sound dock....when loading the iPod from the Mac, what  "Import Settings" (under iTune "Preferences"),  should be used to maintain a constant sound level when playing music?  Mac OS 10.6.8, iTunes 10.6.1.
    There are many Import Settings available and it is somewhat confusing.  Any suggestions?

    Go to iTunes>Preferences>Playback. Tick "Sound Check."
    iTunes: About Sound Check

  • A small, black dot (hazy and transparent) appears on the screen when my 4s camera is in use. It's not on the lens because I've wiped it clean.  The dot moves when the camera moves.  It was working just fine until today.

    A small, hazy and transparent dot appears on the screen when my 4s camera is in use.  I know it's not on the lens because I've wiped it clean.  The dot moves when the camera moves.  It just started today. Is anyone else experiencing this?

    I have the same exact thing happening. Not a lot of people have this problem. So I'm just going to go to the apple store to see if they can help.

Maybe you are looking for