Some hardware not working on IQ524 and Windows 8

I have an HP TouchSmart IQ524. Everything worked great on Windows 7. I upgraded to Windows 8 and the following things aren't working and I don't know how to fix them.
1) Microphone. Under windows 7, the device was called a microphone array. This does not appear under the list of recording devices anymore. Only "Microphone high definition audio" and it does not register any bars when I make sounds.
2) volume buttons on the side of the all-in-one. They don't do anything. How do they get mapped?
2.5) the home button. There is a home button on the first of the all-in-one. It used to go the touchsmart software from hp. I would now like to map it to the start screen.
3) multitouch. I don't know if this is hardware or software issue. But the "touch pack for windows 7" does not work. It used to under windows 7. Windows 8 says my compute does not support at least 2 simultaneous touch points.
Any suggestions?

Hello tj4242
Since the Windows 7 driver won't install on Windows 8, try installing the following driver from the Microsoft Catalog: AnalogDevices - Audio - SoundMAX Integrated Digital HD Audio.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Similar Messages

Buttons created with edge animate are not working on android and windows devices

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

Flash Player Does Not Work with IE8 and Windows XP

I am using Windows XP VR 5.1 with SP3. Flash Player does not function? So videos will not play that use Flash Player. The Adobe Support Site has been 000 Help because it is a free product. Microsoft says it is an Adobe problem. Finger pointing to the nth degree. I have loaded the latest version of Javascript and Flash Palyer.. Any ideas?

Resetting IE is a shotgun approach, but may be much easier (and faster) for a user than trying to troubleshoot and find exactly which add-on, control, setting is causing issues. For a fast approach, you can reset IE, then start re-installing the add-ons you wish to use. Here is a kb that describes the process and even provides a Fix it: http://support.microsoft.com/kb/923737
If you’d like to troubleshoot, here are some steps that will fix most issues with Internet Explorer and Add-ons. This can be more of a scalpel approach, and could help you save your cookies, stored passwords, etc.
1)      Update your Windows software
a.       Follow the steps below to view updates that are available for your computer.
                                                   i.      Click to go online to the Windows Update website
1.       Note: If Microsoft Update is not installed, you will be taken to the Windows Update website. See the note below if Microsoft Update is not installed.
                                                 ii.      Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
1.       High Priority
2.       Software, Optional
3.       Hardware, Optional
                                                iii.      Select the updates you want, click Review and install updates, and then click Install Updates.
b.      What do I do if Microsoft Update is not installed?
                                                   i.      Follow the steps below to install Microsoft Update and check for updates.
1.       Click to go online to the Windows Update website
2.       Click the Go button next to the Get Microsoft Update Today and then click Start Now.
3.       Review the license agreement, and then click Continue.
4.       After setup is complete, click Check for Updates.
5.       Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
a.       High Priority
b.      Software, Optional
c.       Hardware, Optional
6.       Select the updates you want, click Review and install updates, and then click Install Updates.
2)      Turn off Internet Explorer add-ons you don't recognize
a.       When you visit a website, an add-on might be downloaded without your knowledge, or you might be prompted to download an add-on. These add-ons might cause Internet Explorer to run slowly or become unresponsive. You should remove all Internet Explorer add-ons you don't recognize or trust.
b.      How do I spot malicious add-ons?
                                                   i.      You can usually spot malicious add-ons under the Name column in the Manage Add-ons dialog box. Malicious add-ons might have:
1.       Blank names.
2.       Names that include random characters or have a sequence of numbers and letters (for example, fhriduvh.dll or f6rid8vh.exeas as opposed to Windows Messenger).
3.       A publisher name you might not recognize.
c.       How do I disable an add-on?
                                                   i.      Open Internet Explorer.
                                                 ii.      Depending on your version of Internet Explorer, do one of the following:
1.       In Internet Explorer 6, click the Tools menu, and then click Manage Add-ons.
2.       In Internet Explorer 7, click the Tools menu, point to Manage Add-ons, and then click Enable or Disable Add-ons.
3.       In Internet Explorer 8, click the Tools menu, click Manage Add-ons, and then click Toolbars and Extension (if necessary). Also note the drop down list labeled “Show:” You are interested in Add-ons and Downloaded
4.       Follow these steps to determine the version of Internet Explorer you're using:
a.       Open Internet Explorer.
b.      Press ALT+H, and then click About Internet Explorer.
c.       How can I find which version of Internet Explorer I'm using if it won't launch?
                                                                                                                            i.      If you're unable to launch Internet Explorer you can use the following steps to determine the version you're using:
1.       Click Start, click Run, type %ProgramFiles%\Internet Explorer, and then click OK.
2.       Right-click iexplore, click Properties, and then click Version.
3.       Under Item name, click File Version. The version number appears under Value to the right of File Version.
a.       Note:If the file version number begins with 6, you have Internet Explorer 6. If the file version number begins with 7, you have Internet Explorer 7. If the file version number begins with 8, you have Internet Explorer 8.
d.      If you aren't using the latest version of Internet Explorer, consider updating.
                                                                                                                            i.      How do I update to the latest version of Internet Explorer?
1.       Click to download and install the latest version of Internet Explorer
                                                                                                                          ii.      How can I update Internet Explorer without launching my web browser?
1.       Click to go online to the Windows Update website.
2.       Click Custom to check for available updates.
3.       In the left pane, under Select by Type, click Software, Optional.
4.       Select the Internet Explorer update, and then click Review and install updates.
                                                iii.      Click the name of the add-on.
1.       Click Disable. You might have to restart Internet Explorer for the changes to take effect.
2.       Why do some add-ons include (Not verified) in the Publisher column?
a.       If (Not verified) is displayed in the Publisher column in the Manage Add-ons dialog box, the add-on itself is not digitally signed even though the program that installed it might be. A digital signature verifies that a file comes from the person or publisher it claims to be from, and that no one has tampered with it since it was digitally signed.
3.       How do I disable an add-on if I can't access Internet Explorer?
a.       Click Start, and then click Control Panel.
b.      Double-click Internet Options.
c.       Click the Programs tab, and then click Manage Add-ons.
d.      Click the name of the add-on you want to disable, and then select Disable.
e.      When the Add-on Status dialog box appears, click OK to close it.
3)      Perform a free Full Service Scan using Windows Live OneCare safety scanner (not necessary if you don’t suspect viruses and are confident in the protection you have on your machine).
a.       Go to the following website, and then click Full Service Scan: Windows Live OneCare safety scanner
                                                   i.      http://go.microsoft.com/fwlink/?linkid=56726
If you are still experiencing issues, perform these steps. If the issue subsides, you may discontinue the remainder of the steps
1)      Disable all add-ons (one at a time) until you can no longer reproduce the problem
a.       Close all Internet Explorer windows.
b.      Click Start, and then click Control Panel.
c.       Click Network and Internet Connections, and then click Internet Options.
d.      Click the Programs tab, and then click Manage Add-ons.
e.      Click the name of the add-on you want to turn off, and then, under Settings, click Disable.
f.        Click OK.
g.       Restart Internet Explorer. Continue using Internet Explorer the same way you did when you received a crash report. If Internet Explorer continues to crash after disabling this add-on, continue with the next step.
h.      Repeat steps b through g for each add-on listed. When you can no longer reproduce the problem, the most recently disabled add-on is the cause of the problem. Once you discover the add-on that is causing the issues, you can uninstall it (use Manufacturer’s uninstaller if one is provided) then if you wish to continue to use the add-on, install the latest version from the manufacturer’s site.

Thunderbolt display not working with bootcamp and windows 7

I am running a late 2013 MBP Retina display with a Thuderbolt monitor. I am running windows 7 on a dual boot partition. I can not get my thunderbolt display to work while working in windows. The screen is currently black. I have attempted to follow the instructions in prior posts regarding this issue with no success. Is there a clear fix to get the monitor to work? Thank you

it has to be plugged into the machine before you power on the machine, it is not hot swapable like on OSX
does the screen work in OSX

Power button not working on T540p and windows 8.1

Hello, Just bought T540p running on win 8.1. when I press the power button (top right above keyboard) it the laptop does not go to sleep.
I obviously went to windows settings and set it to "sleep mode" or "power down" but nothing does I cannot put the laptop to sleep except by going thru the convoluted windows 8.1 way. I'd much rather press that button. Has anyone seen this?
Thanks!

Hello tj4242
Since the Windows 7 driver won't install on Windows 8, try installing the following driver from the Microsoft Catalog: AnalogDevices - Audio - SoundMAX Integrated Digital HD Audio.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

ESC (Escape) key not working in Mac and Windows?

It just won't work. Both OSes.

A bloating battery is a bad battery dying and developing gas inside. If this happens the bloated part can be under the left upperside of the keyboard and put pressure there. It may bulge the underside of the macbook, it may bulge under the trackpad and cause irratical trackpad behaviour, etecera. Check the battery.
If it is bad you should replace the battery.
Keyboard: you can replace the keys (per key) I think, if it is a bad keycontact.

Some PDFs not working in Preview. Mac created PDFS work but windows created PDFS dont

Some PDFs not working in Preview. I installed adobe reader and then deleted it because the software was aweful and PDFs have been haveing issues ever since. I can open up PDFs created on my Mac in preview just fine...
But when I try and open a PDF created on a windows computer it says:
"Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html.
For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. "
I am not sure why where the PDF was created would make a difference but couldnt help but notice that was the difference between the PDF files that work and the ones that give that message. I can view the PDFs on a windows computer just fine and never had issues untill adobe, it seems to have messed up PDFs on my Mac and I am so frustrated with them. I have searched my computer for any remaining adobe files, deleted them and restarted my computer but I am still getting this message.

Uninstall Adobe Reader's plug-in.
Remove the following two files from /Library/Internet Plug-Ins/:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Open Safari Preferences > Extensions. Do you see AdobePDFViewer? If yes. disable.
Log out/in and test.
Another option is to download and install this plugin. Schubert|it PDF Browser Plugin . PDF Browser Plugin 2 is free for not-for-profit activities if used at home or at educational institutions.
http://www.schubert-it.com/pluginpdf/

URGENT HELP: Notebook SoundBlaster Audigy2 ZS -- some features not work on window vi

Hello?I've SoundBlaster audigy2 zs that work fine for karaoke, recording on window xp. I've another pc that have window vista. I download this soundcard dri've for window vista from creative.com . However, some features of soundcard are not work as same on window vista. For example:- Can't launch EAX console- Creative surround mixer do not have all option to select especially Microphone?EAX console and Surround Mixer are 2 tools I used the most for recording music, sound ( karaoke)However this function work on XP but not on Vista. Any help will greatly appreciateIf there is any better brain soundcard to meet what I need (karaoke recording), please let me know?Thanks in advanceTienNu2006

I have almost the same problem,
I'm going crazy on this, I have a long story of self built computers too...
Audigy 2 ZS "correctly" installed, but drivers details on "mixer", "midi" and all the codecs details are "installed but not working correctly".
I'm going to format and reinstall everything to see if it's due to previous drivers for an "onboard" sound card
O.S.: windows XP SP2
Proc.: P4 3,40 GHz
GBytes RAM DDR2
Sapphire X300 pro
ASUS P5LD2 mobo

My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7.

My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7. before that i was using widows vista. in the cotorl panel in the hardware and sound section . in the sound section in the recording tab it is written that microphone is not plugged in while i have microphone in front of my screen . could any one help me.?????

Try to disable transparency in Windows, see:
*[[/questions/804050]]
Right click in a free space on your desktop. 
Left click on Personalization. 
There are four options at the bottom of the screen, choose "Window Color and Appearance". 
Select a border color 
Uncheck: "Enable transparency" 
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Hello guys my i phone touch is not working on edges and some touch problem and it is not taking too much time too respond it is purshecd in kuwait can i get replace in india

hello guys my i phone touch is not working on edges and some touch problem and it is not taking too much time too respond it is purshecd in kuwait can i get replace in india it is i phone 4s

saikumar3 wrote:
...it is purshecd in kuwait can i get replace in india it is i phone 4s
No, warranty is not International and is only valid in country of purchase.

Window.close() not working in Chrome and Mozilla

hello techies,
I used the below code on one of my Sharepoint webpart page :
setTimeout(function(){ window.close(); }, 3000);
This script works fine on IE but not working on Moziila and Chrome.
Any help will be appreciated

Hi Sachin,
Use following line of code, before window.close(), see if it helps you.
netscape.security.PrivilegeManager.enablePrivilege("UniversalBrowserWrite");
Thanks,
Vivek
Please vote or mark your question answered, if my reply helps you

Why keyboard and mouse right click not working in Solaris and Linux?

Hi all,
I have two problems:
1) I am working on AWT/Swing application and its working fine in window enviornment,but while running on solaris and linux mouse right-click option window not poping up.
2) Ctrl+c,Ctrl+v,Home and End keyboard key are not working in solaris and linux OS for same application.
Pls provide me some solution for these problem.
-Dinesh

Hi Nik,
Thanks for reply. I found some solution for the above problem.
For mouse right click there was problem in my source code.I have not implemented the mousePressed() method
In case of keyboard Home, End and arrow key working fine after exporting AWTUSE_TYPE4_PATCH=false; in solaris and linux
But still Ctrl-c and Ctrl-v not working.
I am using JDK1.5.0_07+Eclipse IDE 3.1
-Dinesh

Uploading files to website not working with Safari in Windows 7

Safari version: 5.1.7
OS: Windows 7
Hi,
I am a website owner, and I have a feature on my site where users can upload large (up to 50MB) music files to my server. The feature works in Firefox on OSX & Windows platforms and it also works in Safari on OSX. The uploading feature is not working with Safari for Windows. Do you have any idea why and how to fix this? It can't be an issue with my server as it works in other browsers fine and works fine in Safari for OS X.
If you have any information on how to solve this or things for me to try to rectify this for use with Windows operating system it would be much appreciated.
Thanks.

GREAT NEWS!!!!
I have solved this issue myself with some help from my a user on Microsoft Forums. The issue stems from the mime type of each Browser Chrome, IE, & Safari for Windows defaults as audio/wav. When the mime type is changed to audio/x-wav everything works. Firefox defaults to audio/x-wav and when changed to audio/wav it DOES NOT work.
Once I input some code in my .php upload page to change the mimetype if audio/wav is detected everything works GREAT!!!
So Here is what you need to do: Find your upload page and input this code:
echo "MIME Type: ".$_FILES["file"]["type"]."";
right before your "If/then" statement of file type. For me it was near line 30 in my upload.php page, but I'm sure this is different for everyone.
This will detect and DISPLAY the default mime type of your browser on the error page when your upload doesn't work. Once you know what mime type works for your file type then you can change your "if/then" statement for mime type upload to change your mime type to the correct one.
I don't want to give the code here, because I'm sure it's specific to your file types and your site construction, but this should lead you on the right track.
***This is the solution if you ARE NOT ABLE to upload any certain file in a certain Browser. It has to do with mime type construction***
I hope this helps others like it helped me!!!!!

Some hardware not working on IQ524 and Windows 8

Similar Messages

Maybe you are looking for