Some Heirarchy values missing in Data Source : 0COSTCENETER_0101_HIER

Hi Gurus,
Three Heirachy values are not coming to 0COSTCENTER_0101_HIER.
In R/3, we are able to see Heirarchy values using TCODE - KSH3.
But same values are not coming to Data source : 0COSTCENTER_0101_HIER when we run RSA3.
We couldn'tfind out link between KSH3 and our Data Source. Do we need to activate the Heirarchies some where in R/3 to get in to RSA3.
Can you any body help us. As this issue is very urgent.
Regards,

You need to refresh the OLTP tree in Infopackage in BW ,you can see all hierarchies present.
Select one by one through radio button and load the data in SAP BW.
In hierachy selection there is a option Available hierarchy from OLTP.
Just click on that and you can see all the hierarchies in SAP BW.
Thanks and regards
Kiran

Similar Messages

Microsoft BI Semantic Model for Power View is missing in data source

Microsoft BI Semantic Model for Power View is missing in data source type drop down when cretaing a rsds data source for powerview in sharepoint 2013

Hi Sanjay,
I resolved the issue.Follow the steps
1)Go to Central Admin->System Settings->Manage Farm Solutions (Under Farm Management)
2)Check if "powerpivotwebapplicationsolution.wsp" is there and is deployed for the webapplication under which you are creating report by verifying
Deployed to:,if not then deploy that for your web application.
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

Fields missing from Data Source but displayed in RSA3

Hello Experts
I have an issue while finding for a field in the data source. As I am looking for some fields : MABST, MINBE, EISBE on BW Side but not found. When I llok the same fields in ECC Side in the table RSOSFieldmap, then I get these fields in 0MAT_PLANT_ATTR Data Source. In the same time , the fields are not available in the Data source on BW Side as well as on ECC Side(while goin thru RSA6). Also when I execute the RSA3 for the data source, I am getting the data in the Missing Fields. How it can be possible? Also plz let me know how can I make these fields available in Data Source.
I replicate the data source, also i looked for the hidden fields, but still not succeed.
Thanks in advance
Neha

Hello,
TO unhide the field,
Just Goto T.code RSO2 > press change button.> unhide the filds and --> Generate the Datasource
or
Goto RSA6 --> select the Datasource and --> press change button (pencil icon) --> unhide the filed --> Save and Generate the Datasource.
Try the above two option and check if it is working.
also go thru the below post
BI : Hidden field Datasource
Hope this helps,
Sri...

Infosource Fields with values from multiple Data Sources

Hi Experts,
My question is:
i have to load values of only few fields of 0LIS_11_VAHDR and few fields of 0LIS_11_VAITM into one infocube.
If i just create one infosource with those fields only in communication structure, but then i can assign only one data source at time, how to load values from another datasources at same time?
Can i do it using single infosurce? and if yes any guideline....
Thanks......

My dear, the problem is that even for the first solution (only one infosource) you have to manage two separate dataloads, since linking several datasources to one infosource means only that you can manage a unique communication structure, but different transfer rules/structures and, avove all, two different infopackages !
So, you have anyway to face the automation issue of your dataloading.
My suggestion has been more functional and conceptual than technical (for which I gave the same answer, that is, "you can do it"): you are not loading a master data source (the same object 0MATERIAL) with attributes, texts and hierarchies (and in this case it's obvious that you have to use one infosource); here you want to use the infosource dedicated to the header flow to load item info too (and you will have to use the same and unique update rules).
Again, no problem from a technical point of view, but I guess that someone who will look into your architecture, probably, will have something to say with this kind of choice !!!
Bye,
Roberto

Missing 0CLM_INVOICE Data Source for SAP Collections Management

I was activating BC for SAP Collections Management for BI, and it states that exist a 0CLM_INVOICE Data source.
I Look into ECC (R/3) and try to activate de datasource, but it doesn't exist.
Does anyone knows what could be the problem?
Best Regards
Jaime Benavides

Thanks a lot for the answers. We are now at BI Content Add-On 3 SP02, but the data source still doesn't appear.
We checked the R/3 system and it is on SAP BW SP 12.
any other ideas about this issue? We also have a oss message with the subjet.
Best Regards.
Jaime Benavides.

Report Builder Wizard and Parameter Creation with values from other data source e.g. data set or views for non-IT users or Business Analysts

Hi,
"Report Builder is a report authoring environment for business users who prefer to work in the Microsoft Office environment.
You work with one report at a time. You can modify a published report directly from a report server. You can quickly build a report by adding items from the Report Part Gallery provided by report designers from your organization." - As mentioned
on TechNet.
I wonder how a non-technical business analyst can use Report Builder 3 to create ad-hoc reports/analysis with list of parameters based on other data sets.
Do they need to learn TSQL or how to add and link parameter in Report Builder? then How they can add parameter into a report. Not sure what i am missing from whole idea behind Report builder then?
I have SQL Server 2012 STD and Report Builder 3.0 and want to train non-technical users to create reports as per their need without asking to IT department.
Everything seems simple and working except parameters with list of values e.g. Sales year List, Sales Month List, Gender etc. etc.
So how they can configure parameters based on Other data sets?
Workaround in my mind is to create a report with most of columns and add most frequent parameters based on other data sets and then non-technical user modify that report according to their needs but that way its still restricting users to
a set of defined reports?
I want functionality like "Excel Power view parameters" into report builder which is driven from source data and which is only available Excel 2013 onward which most of people don't have yet.
So how to use Report Builder. Any other thoughts or workaround or guide me the purpose of Report Builder, please let me know.
Many thanks and Kind Regards,
For quick review of new features, try virtual labs: http://msdn.microsoft.com/en-us/aa570323

Hi Asam,
If we want to create a parameter depend on another dataset, we can additional create or add the dataset, embedded or shared, that has a query that contains query variables. Then use the option that “Get values from a
query” to get available values. For more details, please see:http://msdn.microsoft.com/en-us/library/dd283107.aspx
http://msdn.microsoft.com/en-us/library/dd220464.aspx
As to the Report Builder features, we can refer to the following articles:http://technet.microsoft.com/en-us/library/hh213578.aspx
http://technet.microsoft.com/en-us/library/hh965699.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Null Values from a Data Source

This is more of an implementation question than a
troubleshooting question. Also, since I've been unable to find any
documentation on this I was wondering if anyone has come across
this behavior or found a bug with it.
Yesterday I was working on an application to explore some
proof of concept aspects of Flex for an application I'm developing.
I started running into a problem with Flex Data Services throwing
back an 'Unknown Property: "clientaddress1"' error whenever I tried
to update data. It seemed that whenever I tried to update a record
in the database it would thrown the Unknown Property error. I spent
a good chunk of the day trying to figure out what was causing this
and finally gave up and called it a day.
This morning I was reassessing what the problem was and
trying to find the differences between my database and my code and
I stumbled upon the fact that I could add no records and modify
them without a problem, however if I tried to access an existing
record and update it I'd get the Unknown Property error.
I start analyzing the database and found that I'd configured
the database to use null values for empty values and the records
that I created with the database had null values, however, any of
the values inserted from Flex were inserted as blank values. As
matching my action script class as clientaddress1 = ""; So, upon
further testing I fould that Flex was not processing the null
values correctly, so that when it came back and rightly generated a
Conflict Error...and then called AcceptServer() it was unable to
find the clientaddress1 property of the class.
Also, if any of the properties in the database are null it
throws the same error. Basically it seems to have invalidated the
object just because one value was null. So if all of my values from
the DB are set to something and only one field is set to null it's
still throwing the error on the first alphabetical item of the
properties.
I can resolve the problem by not using null values in the
database, but...what sort of effect would this have on someone
working with a large legacy database that extensively uses nulls
for undefined values?
Also, if a Flex guru could explain the reasoning for this
happening I would greatly appreciate it!
Best regards,
Chris Maloney

I realize that I didn't clarify that I am using ColdFusion
for getting the data. This class was generated by the Create CFC
wizard in Flex Builder.
package com.generated
[Managed]
[RemoteClass(alias="components.generated.clients.Clients")]
public class Clients
public var clientid:Number = 0;
public var clientfirstname:String = "";
public var clientlastname:String = "";
public var clientaddress1:String = "";
public var clientaddress2:String = "";
public var clientcity:String = "";
public var clientstate:String = "";
public var clientzip:String = "";
public var clientphone:String = "";
public var clientemail:String = "";
public function Clients()
}

CO_PA DATA SOURCE ISSUE

Hi,
I am trying to display a COPA data source, i have given proper operating concern name and tried with costing based and account based it is throwing below error message:
Table entry missing for data source.
when i look into the details it is showing below information.
an attempt was made to extract data using this data source.
this is not possible due to missing of control entries in the system tables.
System Response:
The process was terminated.
Procedure:
if the data source was transported into this system, check the import logs for errors.
I tried to debug it from KEB2, here also i am getting same error message.
Please provide me the answer to over come this issue.

Hello,
The administration of the delta method for CO-PA DataSources occurs in part in the OLTP system. In particular, the time up until which the data has already been extracted is stored in the control tables of the DataSource. Since the control tables for the delta method for the extractor are managed in the OLTP system, certain restrictions apply.
There can only ever be one valid initial package for a DataSource. If, for the same DataSource, a separate initialization is scheduled for different selections, for example, and data is posted to the operating concern between the individual initializations, data inconsistencies could occur between SAP BW and OLTP. The reason for this is that, with each initialization, the time stamp of the DataSource in the OLTP system is set to the current value. Consequently, records from a previous selection are no longer selected with the next delta upload if they were posted with a different selection prior to the last initial run.
See this doc for more info [How to Connect Between CO-PA and SAP BW for a Replication Model|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6]
Also see
[How to Connect Between CO-PA and SAP BW for Data Retraction|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806]
[SAP Network Blog: Best Practices for Profitability Management with SAP Business Profitability Management and CO-PA|/people/community.user/blog/2007/09/10/best-practices-for-profitability-management-with-sap-business-profitability-management-and-co-pa]
[SAP Network Blog: Configuration Characteristics in Profitability Analysis|/people/udo.werner/blog/2007/05/10/configuration-characteristics-in-profitability-analysis]
Thanks
Chandran

Selection in the Generic Data Source does not work

Hi gurus,
I have some problem with the selection in the Generic Data Source.
I have created a view as a base of a Generic Data Source.
This view is based on several table; i.e.: VBUK-VBELN (Sales Order number), VBAP-ERDAT (creation date of Sales Order), VBAP-POSNR (Sales order item), VBAK-BSTNK (Customer Purchase order number).
In the view, some join conditions have been defined: VBUK-VBELN = VBAK-VBELN, VBUK-VBLN = VBAP-VBELN.
I want to extract the Sales Order number, Sales order item and Customer Purchase order number for the Sales order created on the previous year.
On the Generic Data Source, I select VBELN (Sales order number) and ERDAT (creation date of sales order) as selection.
However, when I run the extractor checker (RSA3) on this Generic Data Source, the selection does not work at all, i.e.:
eventhough I restricted the Sales order number and/or the creation date of sales order, the generic data source ignores the selection criteria and extract ALL data.
Does anyone ever have similar problem? Did I miss some step in the Generic DAta Source creation? How to fix this problem?
Thanks a lot in advance.
Best regards,
Fen

Hi Fen,
Just check what is the output you get for the same selection for the view you created.
Bye
Dinesh

How to modify the Generic Delta in Standard Data Source...?

Hi BW Guru's,
We have one issue like all values are coming from customer master data data source 0CUST_COMPC_ATTR which is delta capable. Recently the functional guys done some modification on customer by remapping the field to sales rep. this will be impact on collector field (this is generic field - ZZ field). Now there will be frequent changes for collector field and the delta is not able to pick up the changed values in to BW system.
I have tried in different ways but not resolved finally i got some clue which as follows:
Data source 0CUST_COMPC_ATTR shows delta process as 'E' Unspecific Delta
Using Extractor (Not ODS-capable) in RSA2.
Now i would like to change the option to delta process to D unspecified delta using delta queue (not ODS-capable).
Can any one give advice me on this. Your help will be appreciated.
Thanks in Advance,
Venkat

Hi Olivier,
Thanks for quick response.
I am sorry for not mentioning the module on which i am working.
I am working on FI-CO extraction. I heard that In FI-CO the delta queue does not support because it won't support V3 Delta mechanism.
But any how i will try with ROOSOURCE and let you know the status of it.
If any advices please revert back with suitable suggestions.
Thanks and Regards,
Venkat

Missing master data for Account number Delta

Hi,
I am working on production system,Some records are missing master data(attributes street,city for Account number for starting with Account number 9xxxxxx) for Delta load,Field lenguth is 10.these Missing records are getting loaded with full load or full repair.but I want to load load with regular delta load.Every day I am getting records with other Account number start with 1 to 8.and load is fine. Problem with only Account number 9xxxxxx.
Please help me whats the problem,where can i find related info.how to fix this issue.
Is there any delta setup problem
This generic data source ,pulling from table ADRC.numeric pointer.

Hi ,
Please check at source sytem side in RSA3 whether you are able to loacte the data with the mentioned account number............
please post your reply to proceed further
Cheers,
Swapna.G

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

Create data source -- table does not exist in data dict.

Hello Experts,
I'd like some suggestion on creating customized data source in SAP R/3.
First, I created a program for extracting data in to a structure layout and then created an InfoSet to link with that program.
Finally, I chose to create a data source for transaction data using "Extraction from Query".
Once I save the datasource, there was a message like "Table SY does not exist in data dictionary."
I checked that program and InfoSet. I did not found any compile error.
I wonder how I could investigate this kind of error.
I tried to create another InfoSet calling other program and then create a datasource. There was no error.
My first assumption was there is something wrong in the program.
Any suggestion on this would be appreciated.
Thank you very much.
-WJ-

Thanks for your suggestion Pravin.
However, I found the problem already. This is because the package assigned to a program and to a structure layout were different. After I reassigned the correct package name to the structure layout (same package name as assigned to the program), my datasource could be created.
This problem has been resolved.
-WJ-

Key Figures in Joined Data Source

Hello,
I have created some Key Figures for the Data Source "Sales Order Item". Reports based on this Data Source are working fine and also my Key Figures are displaying the right results.
Now I want to create a Joined Data Source (Left Outer Join) with the Sales Order Item and Outbound Delivery Detail Line Items. The problem I have here is, that my own Key Figures based on Sales Order Item are not showing up in the list and I cannot select them.
Does anyone know why? Do I have to create the same Key Figures again and again as soon as I want to join the Sales Order Item Data Source with any other Data Source?
Thanks for any feedback.

Key figure are not available in joining Data Sources, Characteristics of same type from different Data Source data element available in joining scenario.
Regards
Naveen

PerformancePoint - 2010 Scorecard filter based on two data sources (Actual - OLAP/Target - Sharepoint List)

Hi
I have KPI's for tasks performed by specific groups within our organization, the actuals are determined by an MDX tuple formula against an AS OLAP data source:
([Change Task Assignment Group].[Group Subtype].&[GDC PM], [Measures].[Average task duration - m]) /1440
The Task Name is provided by a filter, also looking at the AS OLAP data source.
This woks well and allows us to have a single scorecard for the team, providing actuals depending on the task selected from the filter. The problem comes in setting targets for the KPI's! I can only set one target for each KPI and this is
the same for which ever task is selected via the filter. The target is stored in a SharePoint list.
Is it possible to have targets for the different tasks driven by the same filter? Can a single filter be configured to return values from two data sources to both the Actual KPI value and the Target value?
Thanks

A good solution. Liked it very much. Can you please make it a technet blog for others.
[email protected]

Some Heirarchy values missing in Data Source : 0COSTCENETER_0101_HIER

Similar Messages

Maybe you are looking for