Some Help for MSI-TV@nywhere master
Instead of re-installing windows check this out
http://www.pcworld.idg.com.au/index.php/id;1411883390;fp;2;fpid;1277378924
Its a nice howto on changing win-system files witch don't come with an uninstall like DirectX
can come in handy inthe future
Similar Messages
-
MSI TV@nywhere MASTER PCI TV Tuner card FAQ
So you’ve just decided to add a MSI TV@nywhere Master card to your PC, you’re gonna need some help installing it then!! Before you continue, I recommend you download the Unofficial New Drivers in the other sticky, to avoid any heart (and brain!) ache.
For best results also, you should be running at least DirectX 8.1. This is included on the driver CD, or you can download the latest version from Microsoft's DirectX Page. If you have a P4 which supports Hyperthreading, you will also need at least Windows XP SP2, otherwise you will have to disable hyperthreading in BIOS.
You should also be in the habit of having the latest drivers for your video card, audio card and motherboard chipset; this can also avoid any future TV software failure. And make sure you regularly run Windows Update (or use the Automatic Update feature) to keep your Windows clean and up-to-date. And also remember when installing new drivers or software, if the installer suggests you restart the computer then do so, before you install anything else! Drivers not installing correctly are common causes of problems, especially with this card!
INSTALLING THE HARDWARE
I’m presuming you’re familiar with the concepts of building and upgrading PCs, so I won’t go into too much detail on obvious stuff (like “remove the side panel of your case, locate a free PCI slot…”).
Fit the TV@nywhere Master card into a free PCI slot. If you didn’t get one with it, you’ll need a CD-audio lead from somewhere (the thin grey lead). If you have one connected between your CD drive and your soundcard CD-Audio In connector, then use that, any version of Windows after 98 supports digital audio extraction, so it is not needed there now. Connect one end of the audio lead to the 4 pin header on the TV@nywhere card and the other to the AUX input on your soundcard (or motherboard if using onboard). If you are installing the Mega TV Tuner in a Mega series barebones, connect it to the TV audio input on the mainboard to the rear. Don’t worry about using the 3.5mm jack plug lead to connect tv card audio, we don’t need it now, doing it this way.
CONNECTING YOUR TV SIGNAL
Depending on your global location, this may vary. Either way you need to connect either a aerial (ANTENNA) or cable (CABLE) to the CATV connector on the card. Someone will no doubt clarify this for me, but cable is for US-type cable, which doesn’t need a decoder box. Most people will be using the Antenna I’m guessing. Your choice of CABLE or ANTENNA needs to be remembered, you’ll need this later.
You will not be able (or have limited success) in connecting a video recorder or set-top box to the CATV connector. Instead you will need to use the Composite or S-Video connector, and connect the audio source either directly to the soundcard or to the Line-in on the TV card.
INSTALLING THE DRIVER
Don’t use the driver on the CD. Download the latest driver from the MSI download page. If you are a Mega series user, make sure that Windows has been installed onto the C: drive. If not you’ll have to reinstall, and disable the USB controller in BIOS to prevent the card readers becoming the C: and D: drives. This also causes problems later.
I would advise temporarily disabling any anti-virus programs at this point, to avoid any complications.
When you start up after first installing the card, cancel any Found New Hardware wizards that appear. OK, so extract the contents of the downloaded ZIP, and run the PVSSetup.exe file to install the drivers. Once this is complete, RESTART your PC and the drivers will be installed for the new hardware found.
Check in Device Manager, there should be four new hardware listed under Sound, Video and Game Controllers related to MS8606. If you see any with the (?) next to them, you might need to try the card in another slot.
INSTALLING THE MSIPVS TV SOFTWARE
If you wish to use other TV recording software other than MSIPVS then please feel free to do so.
MSI do not make their own software. At least not all the time. MSIPVS is a rebranded version of Intervideo’s WinDVR software, with extra features added such as network streaming for TV@nywhere. Some people love it. Lots of people hate it. Generally most people who have posted here hate it. People who love it tend not to post if they don't have problems. The people that hate it generally mess initial settings up, which can cause problems when they try to change it. The more patient of us will always get it eventually right!
Install the MSIPVS software. Easy as that. Its setting it up correctly that’s the tricky part. Listed below are the main things to look for when performing initial setup. If you are unsure about anything else then read the manual! Only a complete genius would dare install any unfamiliar hardware without having the manual handy for reference - how do you suppose I learnt anything?
Device
Video Input:
"Device" is always the Conexant Cx2388x Video Capture"
"Source" - select TV if you are connecting your signal to the CATV connector (antenna or cable), select S-Video or Composite if using these instead
"Standard" - set this to your local TV standard, eg if in UK set to "PAL-I". if unsure, do a Google search and find out!!
If you don't set these correctly you won't receive any channels and/or they will appear incorrectly.
Audio Input:
"Device" will be your soundcard or onboard audio device
"Source" will be the connector your TV card audio output is connected to, this will be "TV" on Mega series, otherwise check!! If you connected the internal lead to AUX on your soundcard or mobo, then set it to "AUX". If you used external lead to connect to Line-In, this will be "Line-in" etc etc.
If you don't set these correctly you may or may not hear audio while watching live TV, and you will hear no audio on recorded TV.
TV
Tuner:
"Input" will be Antenna if you have an aerial connected, or Cable if you are connected to unencoded cable TV.
"Country or Region" - if need to explain this one then maybe you shouldn't have this card!
Channel
Now we will see if your settings and TV signal are good! Tick the Freescan box, and then click on Autoscan. This may take a while, and for a short time it may appear that the program is doing nothing. Patience! It will soon start, and then pick up any available channels it can find.
Make sure you have a good strong signal if you are using an aerial, otherwise TV@nywhere won’t pick up as many channels. UK viewers – just using a simple set-top aerial and signal booster, I could even receive Channel Five (or “five” as it is known now!)
So at this point now, if all has gone well, you should be able to watch and record TV on your PC! If it hasn't..."I've lost my CDs and MSIPVS needs a serial number to install!"
MSI in their wisdom printed the serial key for MSIPVS on the actual CD. This serial key is the same printed on EVERY CD. Which kind of defeats the object in my humble opinion. Anyways, the answer can be found in this post: MSIPVS requires serial number!
"When installing MSIPVS, the program hangs then shows a message saying "remote procedure call failed" "
If you are a Mega user, you have installed Windows onto a partition other than C:. You will need to reinstall Windows, making sure you disable USB controller in BIOS, so that the card readers do not take up C: and D: drives. Upon first restart (after Windows has created partition), you may re-enter BIOS and enable USB controller before Windows continues installing itself.
"MSIPVS installs, but when I start the application I get an error message "WinDVR has caused a problem and needs to shutdown" "
hpkuo credits this to sizzle in his hints and tips thread, but I'll elaborate a little. The problem is caused by QuickTime codecs installed by Nero 6.3.1.15. It is unclear whether later versions of Nero were fixed, but earlier versions should be okay. "A "quick fix" is to rename the files "NeQTADec.ax" and "NeQTVDec.ax" in "C:\Program Files\Common Files\Ahead\DSFilter\"."
Another alternative suggestion is to uninstall the codecs from the registry. I found this solution in another forum for another TV card with same problem:
Go to Start > Run (or press Windows key + R) and enter:
regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTADec.ax"
regsvr32 /u "C:\Program Files\Common Files\Ahead\DSFilter\NeQTVDec.ax"
The only consequence seems to be that Nero Vision can’t decode Apple Quick time format after this (something I can live with)
If you do require QuickTime codecs to be installed, there is the Quicktime alternative available from here: http://www.free-codecs.com/download/QuickTime_Alternative.htm . Or you could just use an earlier version of Nero.
PS if you are using a non-english setup of Windows, then the above paths will relate to how windows translates on your PC - ie subsitute Program Files etc for your local translation
"I have connected the external audio lead to the Line-In (blue) jack on my mobo, and set it correctly in MSIPVS, but I hear no TV sound"
If your mobo supports 5.1 speakers but only has three jacks on rear, the Line-in and Mic jacks have been configured to act as Rear Speaker and Center/Sub outputs. If you have only two speakers, they should be connected to the green Front Speaker jack. You will need to go into your audio hardware's configuration panel / Windows Audio Device Properties to correctly configure the rear jacks.
The other alternative is to use the internal audio connector - simply use a CD-audio lead to connect it to the AUX or CD internal connector on your mobo or soundcard. CD audio leads (the analog grey lead from your CD drive to the soundcard / mobo CD audio connector) are redundant now, as Windows now uses digital audio extraction through IDE channel. Make sure you set the audio signal correctly in MSIPVS to match this.
"When I start up Windows I can hear a hissing like "static" / the radio is playing"
One issue that was fixed in the latest Drivers; if that still doesn't work then the Radio volume is not muted at Windows startup. I'll let hschroed take over here:
"Both MSI Radio and MSI PVS, unmute the TV card at program start, and mute the TV card at SUCCESSFUL program exit (remember we are not talking about the soundcard mixer state here). What this means is as long as a single program start and a single SUCCESSFUL program exit takes place, the TV card tuner will be muted, regardless of what the soundcard mixer audio source states are. If the PC is rebooted (without a PC power-off), for whatever reason, while the MSI Radio or MSI PVS program is executing (a successful exit has not been performed), the TV card will remain in an unmuted state until the next startup and successful exit of either of the two programs.
The TV card mute/unmute status is carried over a reboot without PC power off. What this means is that after a PC power on, once the TV card has been properly muted by a start and successful exit of the MSI program, the TV card mute/unmute status should be in proper synchronization with the applications (regardless of the soundcard mixer status), as long as the PC is not powered off. (Romulus mentions computer coming out of standby. I did not test that scenario but I would expect that if going into standby means power is stopped to TV card, the effect would be similar to a PC power off)."
"My regular TV receives all 5 channels (even Channel Five!), but when I connect aerial to TV@nywhere I only get 3"
Common to all TV tuner hardware (not just MSI's!) is the need for a good strong signal. A moderate signal might appear okay on a regular domestic TV, but might not be strong enough for the TV tuner hardware. Consider investing in a good signal booster, or getting your aerial changed.
Consequently, I have also learned today that TOO strong a signal is bad for TV tuner cards, as soon as I know more I'll let you know...
"I have connected my VCR to the CATV connector, but it does not appear when autoscanning."
"I cannot receive any channels when I connect my Sky box to the RF (CATV) connector."
Thanks to a wonderful technology called "Macrovision" protection, many VCRs and satellite/cable boxes won't work in this way by connecting them using their RF output. Anyone who gets a result is very lucky. There's always the Composite and S-Video In connectors to try. But either way, the TV@nywhere card won't scan all their channels, you'll still have to change them manually.
"Windows XP Media Center says that my "tuner hardware is malfunctioning or not installed" but I have installed the latest TV@nywhere drivers from MSI"
Neither the Vox or the TV@nywhere cards are compatible with MCE2005. MCE2005 requires an analogue TV card capable of hardware MPEG2 encoding, or a software DVB-T (digital) card that already receives an MPEG2 video stream over-the-air.
You can however still use the Vox or the TV@nywhere using the MSIPVS software outside of the MCE2005 application.
"MSIPVS keeps defaulting my location back to Afghanistan, even though I set it to US / UK/ Sweden / Latvia / Kazahkstan"
You will need to reinstall the drivers and software due to a glitch. Uninstall MSIPVS and the tuner drivers (with its PVSSetup.exe setup program) then restart your PC, and ignore the Found New Hardware wizard. Install the tuner drivers with the PVSSetup.exe program, then restart your PC. Then install MSIPVS, restart your PC and you're good to go again!
"Where can I find these "Unofficial New Drivers" that people keep referring to here?"
The "Unofficial New (BETA) Drivers" became obsolete when MSI officially released them. You can find them on the Product Support page for this card, as they are now the latest drivers. MSI TV@nywhere Master product page
[Last edited 8th October 05 by Dr Stu] -
I need some help for an explanation. Loop for 1 minute.
int minute=1;
long currentTime=System.currentTimeMillis();
long stoppingTime = currentTime + (minute * 60 * 1000);
while (currentTime<stoppingTime) {
// do x;
currentTime=System.currentTimeMillis();
}I want to have the loop to run for 1 minute. It does not seem to work.
What did I miss? I need some help for an explanation.Ran:
class PrintTimeAsProcess {
public static void main(String[] argv) throws Exception {
int minute=1;
long currentTime=System.currentTimeMillis();
long stoppingTime = currentTime + (minute * 15 * 1000);
System.out.println("START Time: "+currentTime);
while (currentTime<stoppingTime) {
currentTime=System.currentTimeMillis();
System.out.println("END Time: "+currentTime);
}Got:
START Time: 1149278202718
END Time: 1149278217718
1149278217718
-1149278202718
15000 -
Hi all! this time i need a simple thing. I have two parameters p_vblnr and p_chect.The firstone has a Search help that i did with se11 and the second one has a standard search help for chects. I want to create a search help for p_chect that only visualice the values related to p_vblnr parameter and <b>replace the standard search help for that field</b>.
Ej: if p_vblnr is '10021562' i want the search help to visualice the chects related to that vblnr.
is this possible??????
i promise rewards points for help!!!!
thank in advance!Andrew,
Try following sample code.
CLEAR: t_dynp_flds,
t_dynp_flds[].
t_dynp_flds-fieldname = 'LFA1-STCD1'. " ur first parameter
APPEND t_dynp_flds.
CLEAR t_dynp_flds.
*--- Read screen field values before PAI field transport
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = 'ZFFI'
dynumb = '1000'
TABLES
dynpfields = t_dynp_flds
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE t_dynp_flds WITH KEY fieldname = 'LFA1-STCD1'.
IF sy-subrc EQ 0.
MOVE t_dynp_flds-fieldvalue TO lfa1-stcd1.
ENDIF.
ENDIF.
IF NOT lfa1-stcd1 IS INITIAL.
g_stcd = lfa1-stcd1.
Clear fields
CLEAR : t_taxid1,
t_taxid1[].
t_taxid1-gap2 = space.
Select vendor and taxids from Vendor Master table
SELECT lifnr
name1
FROM lfa1
INTO (t_taxid1-lifnr, t_taxid1-name1)
WHERE stcd1 <> g_stcd AND
stcd2 <> g_stcd AND
stcd3 <> g_stcd.
APPEND t_taxid1.
CLEAR t_taxid1.
ENDSELECT.
IF sy-subrc NE 0.
No table entries found
MESSAGE s001(zffi).
EXIT.
ENDIF.
SORT t_taxid1 BY lifnr.
DELETE ADJACENT DUPLICATES FROM t_taxid1 COMPARING lifnr.
CLEAR : g_pop_idx.
Function module to get Tax code values
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
endpos_col = 85
endpos_row = 20
startpos_col = 20
startpos_row = 10
titletext = 'List of Assign Vendors'(t11)
IMPORTING
choise = g_pop_idx
TABLES
valuetab = t_taxid1
EXCEPTIONS
break_off = 1
OTHERS = 2.
IF sy-subrc EQ 0.
READ TABLE t_taxid1 INDEX g_pop_idx.
IF sy-subrc EQ 0.
CLEAR : t_dynp_flds,
t_dynp_flds[].
Append screen values
t_dynp_flds-fieldname = 'G_LIFNR'.
t_dynp_flds-fieldvalue = t_taxid1-lifnr.
APPEND t_dynp_flds.
CLEAR t_dynp_flds.
Change screen field contents w/o PBO
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = 'ZFFI'
dynumb = '1000'
TABLES
dynpfields = t_dynp_flds
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc NE 0.
CLEAR : t_dynp_flds,
t_dynp_flds[],
lfa1-lifnr,
lfa1-stcd1,
lfa1-name1.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
-Anu -
I need some help , for create some paper on air
Hi everyone
I need some help , i work in a static sequence from Tehran street (1 frame), i paint damages on this frame in Photoshop because i need war atmosphere, then i add some smoke and cloud with particular .
but i think this sequence is not realistic yet
now i want add some moving paper in air and on street
do u have any solution for how can i make this paper and moving those
Thanks a lot
and pardon me for bad English
Ali MolaviThe best tool to add this kind of particle is After Effects.
If you have the Creative Cloud then I recommend you download that.
Slightly annoying voice over, but here is a youtube tutorial you can follow top make floating particals. You can adjust it to make it look exactly as you want.
http://www.youtube.com/watch?v=dq2op6yqvFk&noredirect=1 -
Some help for a simple condition statement...
Hello! I wanted some help this condition statement...
There are 2 tweens called "mc_sun" and "mc_welcome" I want to
run when someone clicks on a button called "btn_home", but I don't
know exactly how to write the code because I've already tried these
2 modes and noone work at all!
THANKS FOR THE HELP!!!!I think I know what you're after here ... but I could be
wrong ;) but try this: -
Hi and Evening to Everybody,
I have a Scenario where i need to select an entire row using the check box. Let me first define the Situation. I created a Simple Sql-report where the first column is a Simple Checkbox and the second column is a display only name and followed by the rest 5 columns as a checkbox.
my table structure is :
**create table satt (SELECT_ALL VARCHAR2(10), Name VARCHAR2(50), Object1 VARCHAR2(10), Object2 VARCHAR2(10), Object3 VARCHAR2(10), Object4 VARCHAR2(10), Object5 VARCHAR2(10));**
Now i had a requirement where i need to Check All or Uncheck All Checkbox by clicking SELECT_ALL column header and i made it using
simple java-script :
"<input type="Checkbox" onclick="$f_CheckFirstColumn(this)">"
Now i need to Check all checkbox in a row by clicking any of the SELECT_ALL check boxes. (Say i have 5 checkboxes in SELECT_ALL column and if i click 3rd checkbox... i need the entire 3rd row checkbox to be checked on click of that 3rd check box).
I hope i was clear with my question. i did my best. Please help me out with this... Im eagerly lookin for the solutions.
Thanks & Regards,
- The Beginner.
Edited by: 854477 on Jul 18, 2011 1:50 AMDear BEGINNER..
Assuming that you're using a standard table based layout for the report, what you need to do is add some code in the HTML attributes of the checkbox in the first column..
The following javascript would set all other checkboxes in the same ROW as the first checkbox to the same state as it is.
onclick="if (this.checked) {$f_CheckAll(this.parentNode.parentNode, true);} else {$f_CheckAll(this.parentNode.parentNode, true);}"NOTE: that this will only fire if the first checkbox on the row is actually clicked by the mouse. It won't fire if the first checkbox in the row is set by the CHECK_ALL in the column header.
Hope this helps.
Doug gault
www.sumneva.com -
Please help for MSI GX660 bad flash
Hello everyone!
I've writed to Online Custumer support on MSI Company, asking for new BIOS version fo my laptop. They send it to me, and i flashed BIOS successsfuly to new version, but i didn't like it becouse a lot of config menus were removed. I asked Tech Support for the original one, i've flashed it the same way, but laptop wont boot on now. Everything start exept of display.
I'm waiting them for answer from 1 week- nothing !! There is not MSI representive company in Bulgaria and i'm stuck :(
Also i want to say a lot things to MSI Customer support !!! For me - THEY bricked my laptop. And i can't understand how htey just stop write to me and leave me with this brick :(
Can anyone help with something ? Blind flash, recovery, other ?? Thanks a lot !Quote
I didn't asket exactly for 1.0F but in 1st question i told that is my original version.
you should told them which bios version you are looking for,
as stock bios versions varry per models.
Quote
So, you reccomend to swap CPU, Ram , Video card with others to try if it could works?
Yes eventually
Quote
Can anyone give me 1.0F Bios for my GX660 and what is hiw auto recovery name so i can try blind flash/recovery ?
attached it below
but for recovery name is unknown.
you can try names: AMIBOOT.ROM , E16F1IMS.ROM
placed over FAT/FAT32 USB key, and use this procudure: https://forum-en.msi.com/index.php?topic=134435.msg1009999#msg1009999
just use your bios file names.
other option is to desoldier to bios chip, then to repprogram it and resoldier back
[assume your NB has no warranty] -
Bios updat help for msi x99s mpower board
Does anyone know the link for the msi x99s mpower motherboard bios updates ? i have the msi x99s mpower black and yellow motherboard i'm looking for the bios update link. because when i try to play game like csgo and h1z1 my game lags real bad and i know it is not the internet because i have tried 3 other pc on same line they all work fine and i even had my graphics card and hdd tested they all are fine so i am hoping it might be a bios issue
Quote from: Chike on 06-March-15, 10:07:20
First I don't think you or anyone should put up with having only 3 channel memory when they paid for 4. If the board or CPU are faulty they should be replaced.
You can start with MemTest86 or MemTest86+. MemTest86 has multi CPU test option that is more real life like, I don't know about MemTest86+, haven't used it for quite long time.
Before using Prime95, make sure you have CPU/Core temperature monitoring software such as RealTemp, Core Temp, HWiNFO, or CPUID HWMonitor.
Prime95, I assume th 64-bit version, but this create a lot of heat, what cooler do you have?
You can choose to run 6 threads instead of 12, it should be stressfull enough, also you can add the line Code: [Select]
CpuSupportsFMA3=0 to local.txt to disable FMA3 instructions that are more stressful on the CPU but not necessarily on memory.
If it is still too hot (>70c) add Code: [Select]
CpuSupportsAVX=0Do not close the window to stop the test, select exit from the file menu.
Or you can try OCCT which is all-in-one, stress + monitoring in one program. Select Large Data Set to stress memory. It also runs somewhat cooler than Prime95.
trust me i agree i talked to msi support and got no help they just kept telling me they know about the issuse and should have a fix for it soon, But yet i have seen many people say they have the same problem over 5 months now....... So i just talked to amazon and they said no problem they will give me a refund so now i need to find a good board to work with my i7 5820k 2011-3 pcu -
MSI Tv @nywhere Master (MS-8606) Little Problem w/Video
hmm ive notice somthing wrong with my Video... i took two screen shots to show
http://yuz.p5.org.uk/video01.jpg
if anyone knows the cause or a fix please tell me
Best Regards
YuzPatience Yuz this forum has no input from MSI so you have to wait until someone, somewhere else in the world is awake.
Regards to MSIPVS yes it is awful and there has been quite some discussion within this section of the forum and the survey section as to the problems with this software. It is not only MSIPVS that is at fault the drivers also need some work. On some PC`s MSIPVS causes crashes but by far the biggest complaint is the poor display. Also MSIPVS or the card/drivers not sure which, will not remember it`s locale, every time it is started it will go back to the default in my case it seams to be PAL_B and some times to NTSC my locale is the UK and the TV setting should be PAL_I but getting to stay on PAL_I is a big problem. It makes it hard to schedule a recording as it will probably start in the wrong format. I agrre with you that feeware software is better than MSIPVS.
Thanks to your previous post I can confirm that you have sorted the remote`s missing functions.
Now all we need to get the drivers and MSIPVS sorted. -
Hi,
I am new to java and I am developing a login module and when i enter the login name and password and clicks on ok button i want it to be displayed as "welcome" followed by login name.
So i wana ask how to pass the string to other code.plz help me out.
Code 1:
import java.awt.*;
import java.awt.event.*;
class Login implements ActionListener
Frame f;
Label l1,l2;
TextField tf1,tf2;
Button b1,b2;
public Login()
f=new Frame("Login window");
l1=new Label("LOGIN");
l2=new Label("PASSWORD");
tf1=new TextField(20);
tf2=new TextField(20);
b1=new Button("OK");
b2=new Button("RESET");
tf2.setEchoChar('*');
f.setLayout(new FlowLayout());
f.add(l1);
f.add(tf1);
f.add(l2);
f.add(tf2);
f.add(b1);
f.add(b2);
f.setSize(500,100);
f.setVisible(true);
b1.addActionListener(this);
b2.addActionListener(this);
public void actionPerformed(ActionEvent ae)
if(ae.getSource()==b1)
String s=tf1.getText();
System.out.println("Login = "+s);
Registered x=new Registered();
else if(ae.getSource()==b2)
tf1.setText("");
tf2.setText("");
public static void main(String args[])
Login x=new Login();
Code 2:
import java.awt.*;
class Registered
Registered()
Frame f;
f=new Frame("REGISTERED");
// s=tf1.getText();
public static void main(String args[])
Registered x=new Registered();
System.out.println("WELCOME "+s);
}Hi,
ok what you can do is make the Registered() constructor be
Registered(String s) {
this way when you call Registered from the Login() class you can use
Registered x = new Registered(tf1.getText());
so that the string is sent to the Registered class.
in the Registered class you can now use the constructor variable "s" for the name so the output would be
System.out.println("WELCOME "+s);
That would fix your problem. Although your Registered class could be improved. I suggest you get rid of the main() method in Registered() it isn't needed as the Registered object is created in Login.
i would make it:
import java.awt.*;
class Registered
Registered(String s) {
Frame f=new Frame("REGISTERED");
Label l1=new Label("Welcome "+ s);
f.add(l1);
f.setSize(100,100);
f.setVisible(true);
I hope all that helps
Dex -
C or C++ compiler (or even editor with some help) for OS X needed
Hey,
I would like to learn C and C++ and am looking for a compiler for OS X that generates executable files. An editor that helps you a bit would be even better. Does anybody know any kind of software for this? Maybe even freeware?
Thank you,
JeromeIt's called Xcode. It's supplied by Apple with every machine on the OS install Disc.
Put your OS X install disc in the drive and look for the developer tools package. It might be in a folder like 'Optional Extras'.
...or if you can't find your disc (or just want a newer version) you can get it from http://developer.apple.com/technology/xcode.html, but you need to create a free account. -
Need some help for error message
Procedures of package Portal30.wwv_builder do not seem to work anymore. When I want to create any database object, or even to modify some application components (call wwwv-builder.accept or wwv_builder. show) here is the message displayed :
Mon, 23 Apr 2001 14:59:00 GMT
ORA-03113: fin de fichier sur canal de communication
DAD name: portal30
PROCEDURE : PORTAL30.wwv_builder.accept
URL : http://demo:80/pls/portal30/PORTAL30.wwv_builder.accept
PARAMETERS :
============
P_AL1:
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
Can anyone help me ?...
nullWhich versions of the database and portal are you using?
-
Hi Everyone,
I've test codes for east region and west region.
I've a requirement to replace the west test id with east test id.
That mapping has been done by the onshore team, I've got the mapping doc.
But updating these details is a tricky part. It's nothing like direct update and replace those test codes.
As per the mapping if it's
In case of one to one (East - West) mapping which going to affect only a single row, I’ll have to update there,directly.
In case of one – many (East - West) mapping and which is going to affect multiple rows, I’ll have to update the latest one and rest will be deleted only in that group. To identify the latest we have to check the latest order detail for that test.
Suppose I've a west code named W123 and it has to be replaced with E123, in this case direct update.
But now I've a transaction table where a patient has ordered multiple tests, In this case suppose the
patiend id is P123 and ordered tests are W123, W234, W345; I'll have to update W123 as E123 and rest
should not be deleted.
But if I'll get multiple west code mapped towards single east code, the latest record as per the order detail needs
to be updated and rest needs to be deleted if mapped with multiple west test codes, for single record and group record as well. Some thing like this.
E123 - W123, W234 so I'll have to find out the latest and update there accordingly for single record and now
patient has orderd multiple tests and the group record is like P123(patient) -----has orederd for W123, W234, W345.
Now only the lastest test code suppose W234 has to be replaced with E123 and W123 has be deleted and W345
should be there with E123.
Now please see the code.
CREATE OR REPLACE
PROCEDURE P_UPDATE_TEST_ID AS
V_EAST_TEST_ID TEST_CODE_CONVERSION.EAST_TEST_ID%TYPE;
V_ARRAY VARCHAR2(4000);
V_COUNT NUMBER := 0;
BEGIN
FOR I IN (SELECT EAST_TEST_ID
,STRAGG(WEST_TEST_ID) AS V_STRING
FROM TEST_CODE_CONVERSION
GROUP BY EAST_TEST_ID)
LOOP
V_EAST_TEST_ID := I.EAST_TEST_ID;
V_ARRAY := I.V_STRING;
V_COUNT := V_COUNT+1;
DBMS_OUTPUT.PUT_LINE('EAST_TEST_ID = ' ||V_EAST_TEST_ID|| ' || '||
'WEST_TEST_ID = ' ||v_array);
Now after this I need to segregate the string values and check individual record
and group record as well, for update. Now If I'll add the regexp_substr, then how
to map those extracted values for checking.
END LOOP;
DBMS_OUTPUT.PUT_LINE('v_count = ' ||V_COUNT);
END P_UPDATE_TEST_ID;Please suggest something.
Regards,
BS2012.
Edited by: BS2012 on May 23, 2013 4:40 PMHi Bawer,
Thanks for your interest, but I've done that yesterday.
Bawer wrote:
Sorry, but
>
Here I'll have to check which one is the latest and update that with relative east test id ...
>how do you describe the *'latest'* and *'relative east'* ?We have one more template table where we'll have to take the max of template_test_id to figure out "which one is the latest?" To identify the relative east we have a parent table named "test" from there we can find the relative test ids by the column name called East_west_ind (indicator); as per the mapping.
and depending to this,
>
... rest one has to be deleted and other should be untouched.
>which one is here, in your sample to be deleted and which should be untouched?
(maybe a sample after-update output?)If you see the patient id 93, we have number of tests has been ordered. But 3257, 3515 test ids are same as per the mapping. So we need to check the max of template_test_id to figure out "which one is the latest?" as we have one entry in template table always for a new order. In terms of that I'll have to update 3257 as it's the latest entry and 3515 has to be deleted and rest of the test ids should be untouched. I did it yesterday, but i couldn't respond you. Thanks once again for your interest. -
Hello,
I have made some changes to the SystemInfo Application (<drive>:\usr\sap\<SID>\JC00\j2ee\cluster\server0\apps\sap.com\tcmonitoringsysteminfo) that I am happy with.
How do I take the whole application now and stick it into a war file so that I can deploy it properly?
The SAP original file is called SystemInfo.war. I can open that with winzip - can I just put my changes into it and zip it again with winzip and rename it to .war?
Or can I import a war into the Developer Studio, do the changes there and then build a new war file (please explain in plain english how that works if it works).
Please do excuse my ignorance in this field, as you can guess I havent done much Java Programming .
Thanks for out thoughts!
Regards,
AndiHi,
So if you found the answer please post it (maybe someone has the same problem) and close the thread:
Regards,
Daniel
Maybe you are looking for
-
Ok, I had gotten a G3 a little while ago for free, along with a HP screen. I am quite tech-savvy, so I booted her up, os 9.2.2 was installed on it. It has 256 megs of ram, the original 10 gig hdd. The hdd gave out after 2 boots, so a I picked up a fr
-
Transfer Posting-Storage Loc-Storage Loc (311) with Ref to Material Documnt
Hi Experts, I have a Requirement of doing Transfer Posting from one Storage Location to Other Storage Location within Plant with reference to a Material Document which is Goods Receipt against PO. With given reference (Material document u2013 GR agai
-
I have a webroot/WEB-INF/jsp directory with my jsps. When I compile I get the following warning for all my jsps: Warning: package name web2d_inf._jsps does not match source file name C:\CVSHome\Orion\jdev\registration\regView\classes\.jsps\_WEB_2d_IN
-
I click on a new tab, then do a google search in the bar at the top of the page. Results come up in a different tab that I didn't want to disrupt. Erg! Mac OS
-
i had a 2GB ipod nano, used it for a month, then got a 4GB one free with my macbook, so i gave the 2GB one to my sister. she tried plugging it into her windows laptop, but it would only charge the ipod and wouldn't sync it to her itunes. how can she