Some HTML Emails Do Not Display Properly

Recently, some HTML emails do not display properly in Mail. All I see is HTML. Yet, 98% of my HTML emails render properly.
Any thoughts on why this happens with some emails? Is it a Mail issue or are these emails not coded properly?

Hello Tony.
Could be a combination but since Mail renders 98% of of all HTML messages properly (using Safari as the engine), this indicates it is a coding problem.
I'm not a big fan of using HTML with email since it introduces a number of problems. If everyone used Plain Text for message composition, the majority if not all problems experienced with email would be eliminated.

Similar Messages

Html emails are not displaying. they just show the code. text emails don't display at all. what's up?

suddenly today my email won't display properly. html emails just display the actual html code instead of a graphic display. Text emails just show a blank page. I have changed the View setting to show messages as original html, simple html and plain text. None of the settings restores things. All these emails were viewable properly yesterday.
Anyone got any ideas as to what's up?

sounds like your index and the data are out of synch. Often the result of anti virus activity either blocking the update of the index or quarantining the whole inbox so there is no mail left to display.
Right click the folder, select properties and then the repair button.

Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

Hello:
Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
Good luck,
Hunt

Some websites do not display properly or function

Using Firefox v29.0.1; running Win 7 Pro 64-bit version.
Some websites do not display properly - as if Firefox is not finding the CSS (Facebook for one).
Also, on Craig's List, I can't click on any of the links including the contact/reply button.
Wanted to attach screenshots but see no place to do so.
Thanks,
paulp575

Looks like something in my history must have been causing it.
That's the only step I needed to go through and seems as though everything has cleared up - for now.
Thanks Phillipp for your help!
paulp575

Some PDF files and other emails do not display the whole page. Is there a way to change that?

Some PDF files and other emails do not display the whole page. Is there a way to change that?

If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I don't know what happened, all of a sudden, the content of here body of my email is not displayed. I can only see the preview lines. I must have inadvertently touched some thing, any idea what happened?

I don't know what happened, the body of my email was not displayed any more. I must have unknowingly pressed something on my I Pad to cause this to happen ? I can read the preview lines ok, but not the mail itself, any idea how to fix this?

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Or...
Double tap the home button to bring up the Recents List
Tap and hold any icon until it wiggles
Press the red to delete the Mail app
Press the home twice button when done.

DW8 files not displayed properly in DW CS3

Any help will be greatly appreciated in the following
question:
I've been using Dreamweaver 8 successfully in creating and
maintaining several websites. However, when I try to use the newly
purchased Dreamweaver CS3 on HTML files previously created on DW8,
the files are not displayed properly (all elements are jumbled up
together in the "Design" view). But, when I do a "Preview in
Browser", the pages are just fine.
Has any other DW user had similar experiences and if so, any
solutions?
Thanks for any help out there!

DWCS3 is much less tolerant of code mistakes than was DW8,
and your symptoms
suggest that this may be the cause of your problems. Do the
DW8 pages
validate when you go here -
http://validator.w3.org?
Can you post a link to some of these pages?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bill168" <[email protected]> wrote in
message
news:g559nv$bc3$[email protected]..
> Any help will be greatly appreciated in the following
question:
>
> I've been using Dreamweaver 8 successfully in creating
and maintaining
> several
> websites. However, when I try to use the newly purchased
Dreamweaver CS3
> on
> HTML files previously created on DW8, the files are not
displayed properly
> (all
> elements are jumbled up together in the "Design" view).
But, when I do a
> "Preview in Browser", the pages are just fine.
>
> Has any other DW user had similar experiences and if so,
any solutions?
>
> Thanks for any help out there!
>

Page will not display properly with inline Frames

I have a html page that will not display properly in Dreamweaver. I have a basic understanding of html and want to be able to edit a website in Dreamweaver that was given to me. It looks fine in a browser, but in Dreamweaver some of the content is missing and displays the following message, "Your browser does not support inline frames or is currently configured not to display inline Frames". I was able to open it without any problems using Microsoft Front Page, so is it possible to view and edit it in Dreamweaver?

Without seeing your page, I'm guessing that your page contains server-side includes, iframes and scripts to other files on the server that populate page with content on the server's end. You can't see it in DW because you don't have all the files in your DW local site folder. You said this views fine in FP. Was your page created in FP with FP proprietary tools?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

OLE Objects are not displayed properly-overlap characters and empty page

I'm using CR4E 12 Runtime libraries to load and view reports that are created in CR designer v10. Some of the OLE Objects (not all) are not displayed properly.
1) A full page contains terms and conditions as ole object is not at all displayed and just shown as black image.
2) Some data in a table (OLE Object) shown as overlapped characters.
Any body know the reason and is there any workaround to solve this issue?
Thankyou very much for your time.

Your problem seems to be with the character encoding you are using for your text. A quick google search for ColdFusion character encoding should turn up the answer. In case you are interested in learning more:
http://livedocs.adobe.com/coldfusion/7/htmldocs/wwhelp/wwhimpl/common/html/wwhelp.htm?cont ext=ColdFusion_Documentation&file=00001201.htm
Hope that helps!
- Michael

Web page not displaying properly - content in wrong place

It's been years since I've done html and this is the first time using Dreamweaver. All my pages have the same header then a horizontal row of link buttons. I have used Divs to create 3 sections of content underneath this. Each div has the following defined for it: #Div { position:absolute; width:913px; height:440px; z-index:1; left: 10px; top: 302px; My main page is not displaying properly. There is a section on the left with text/photo. To the right of this section, there is a second div containing an image map. In Dreamweaver, I preview the page (using Chrome) and it looks fine. However, when I upload it to the web site and then view that page in the web site, the second div is thrown to the upper top right of the page. I do not know what is causing this and how to fix it. Can anyone answer this and perhaps give me some tips?

Start by fixing your HTML errors. You have a significant number of them.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fgivethegaveltotavel.com%2F
Also, you have some CSS errors.
W3C CSS Validator results for http://givethegaveltotavel.com/ (CSS level 2.1)
Position:absolute is never a good way to layout your web pages. For 98% of what you do, positioning is not required and should be avoided. Learn to use CSS margins, padding and floats to align elements where desired.
CSS margin property.
CSS padding property
CSS Float
Nancy O.

Site not displaying properly in IE

Hello,
I'm working on building a site from a template. Prior to today I only opened the site in Firefox and it displays fine. However, in IE for some reason every page besides the index.html do not display properly. The weird thing is, the part that is messed up should be the same as the index.html because they're from the same template.
Does anyone happen to know what I messed up?
Here is the site...
http://testtreks.onlinewebshop.net/index.html

I'm working on building a site from a template. Prior to today I only opened the site in Firefox and it displays fine. However, in IE for some reason every page besides the index.html do not display properly.
Which IE? What does "do not display properly" mean? It looks OK to me in IE8.

Table cells/graphics do not display properly

I'm trying to integrate some HTML code (developed outside of
RoboHelp) for a somewhat complex table used to display a sliced
graphic, background colors, etc. It looks fine in Dreamweaver, but
when I paste the code into RoboHelp (true code pane), some of the
graphic slices do not display properly, e.g., the slices in the
bottom rows are offset slight and get repeated multiple times if I
resize the window. I notice that RoboHelp seems to add a bunch of
its own styles to my code, which might be part of the problem. Is
this a known issue with RoboHelp? Should I not bother using outside
HTML if it has some complexity to it?

quote:
Originally posted by:
MergeThis
...and just what the heck is "a sliced graphic"?
Hey, how can you learn, day after day, if you don't ask,
right?
I'm not an expert, mind you, but since I originated this
post, I'll take a stab at it... "Slicing" a graphic is a technique
used by Web desigers to design and display graphics more
efficiently or more flexibly. It involves slicing up an image into
several pieces like a jigsaw puzzle (often by using a program like
Fireworks). The slices are chosen logically based on function,
e.g., a designer might create a "banner" graphic to be used as a
page header with navigation elements (buttons, text, etc) designed
into the graphic. The graphic might be sliced up so that the
navigation buttons are separate slices. This allows you to easily
add hyperllinks to those individual slices. The part that gets
tricky is that an HTML table must be generated along with the
slices (with each slice in its own table cell) so that the pieces
are displayed correctly, giving the appearance of one large
graphic.

My vertical Spry is not displaying properly in IE 8

I am working on my first website using Dreamweaver CS4 and my spry is not displaying properly over my flash photo gallery. It looks ok in Firefox (although the borders are missing on my submenu for "sheds tool list") but in IE 8 the submenus can't be seen. How can I correct this?
My website is www.toolshedstudio.com
Here's my css:
@charset "UTF-8";
/* SpryMenuBarVertical.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, a fixed width box with no margin or padding */
ul.MenuBarVertical
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: 10em;
    border-top-style: none;
    border-right-style: none;
    border-bottom-style: none;
    border-left-style: none;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are same fixed width as parent */
ul.MenuBarVertical li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 170px;
    border-top-style: outset;
    border-right-style: outset;
    border-bottom-style: outset;
    border-left-style: outset;
    border-top-width: thin;
    border-right-width: thin;
    border-bottom-width: thin;
    border-left-width: thin;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarVertical ul
    margin: -5% 0 0 95%;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: absolute;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    left: -1000em;
    top: 0;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarVertical ul.MenuBarSubmenuVisible
    left: 0;
/* Menu item containers are same fixed width as parent */
ul.MenuBarVertical ul li
    width: 8.2em;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Outermost menu container has borders on all sides */
ul.MenuBarVertical
    border: 1px none #CCC;
/* Submenu containers have borders on all sides */
ul.MenuBarVertical ul
    border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarVertical a
    display: block;
    cursor: pointer;
    background-color: #000;
    padding: 0.5em 0.75em;
    color: #CCC;
    text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarVertical a:hover, ul.MenuBarVertical a:focus
    background-color: #33C;
    color: #000;
    font-size: 100%;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarVertical a.MenuBarItemHover, ul.MenuBarVertical a.MenuBarItemSubmenuHover, ul.MenuBarVertical a.MenuBarSubmenuVisible
    background-color: #33C;
    color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarRight.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarVertical iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarVertical li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;

Hi
You flash movie doesn't have the parameter wmode=transparent. If you set that, the menu bar will be on top.
<param name="wmode" value="transparent">
I hope this helps.
Ben

Images not displayed properly

[Migrated from the Syclo Resource Center]
prashanthi_vangala   01/03/2012 06:44,
Hi,I am working on Agentry 5.4.0I have a list screen where for one of the columns I have a rule to display images ( I use checked and unchecked images ). Earlier the images were getting displayed properly on the ATE but it is not working now and I did not make any changes to the image properties then.But after this, I tried couple of things with the image properties to make it work, like when I do not use any mask colour the image does not get displayed but when i use any maks colour the image gets displayed but its completely blacked out ( and thus for checked image, cannot see the check mark and its completely blacked out ).I face same issue with the login image as well. I added a new Image ( Logo ) to my App for the login Screen, but even this image does not appear on the login screen.
I also tried deleting the Dev folder and re-publishing, but even this does not work.
-Prashanthi
Jason Latko   01/03/2012 11:42
Try deleting the Application directory under your development server where the images reside and publish again.
Completely clear your ATE and transmit again from scratch.
Also, what mask color are you using?
Try using a green hugh and not black or white for the mask.
Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/03/2012 12:38
Hi Jason,Thank you for the reply.I already tried all the things you have mentioned, but the same issue exits still.
Prashanthi
Jason Latko   01/03/2012 12:40
Is it just the ATE, or do you have the same problems using the WIn32 or PPC clients?
Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/04/2012 06:21
Hi Jason,Behaviour in ATE:I have changed the image now and tested with the new image . Now, its behaving strangely:When I do a sync after publishing or a reset of ATE; I see the new image properly displayed on the screen but when I leave the screen and come back to the same screen again, the new image is getting replaced by the old image ( atleast the old image is not displayed properly, it appears like a black square box..and because of the same issue I had with this image I switched to the new image ). Behaviour in Win32 Client:When I tested with the client, I see the new image properly for the first time and when i leave the screen and come back the image disappears..This is the behaviour in client.
Please suggest.
-Prashanthi
Jason Latko   01/09/2012 11:35
Prashanthi,What did you use to create these images?
They are simple bitmaps I assume?
Try creating some very simple images using Microsoft Paint, then set a mask of green in Agentry.
Your problem sounds familiar, but I can't find a matching bug in our database.
Maybe someone else has experienced this?
You could also try upgrading to a newer version of Agentry to see if the problem goes away.
We are currently on version 6.0.4.Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/11/2012 10:02
Hi Jason,
Thank you for the reply.
But strangely, from past few days I see that the image is working fine again.
But kept this topic open because it was wierd, that the image is working correctly again without making any major change. What I did was to just write the rule again which calls the image ( though i did this before and did not work then but worked now ) and to observe the image behaviour for few days.But it seems like it is fine now.
Thanks and Regards,Prashanthi

We am using "jv:imageButton" tag for displaying the image and below is the tag code,
<jv:imageButton styleClass="buttonStyle"
selected="true"
onclick="networkCanvas.setInteractor(clientSelect)"
image="../oracle/communications/inventory/ui/images/arrow.png" buttonGroupId="interactors"
rolloverImage="../oracle/communications/inventory/ui/images/arrowh.png"
selectedImage="../oracle/communications/inventory/ui/images/arrowd.png"
title="#{inventoryUIBundle.SELECT}"
message="#{inventoryUIBundle.SELECT}" />
The able code is present in the below path,
..\public_html\oracle\communications\inventory\ui\network\page\NetworkView.jsff
The images are present in the following path,
..\public_html\oracle\communications\inventory\ui\images\zoomrecth.png
I am not thinking this is a Platform Beta 3 uptake issue. And I am suspecting an issue with integration of ilog with ADF. Any help in this regard would be helpful.
regards,
Chandra
Edited by: user638992 on Feb 25, 2010 3:40 AM

Ads are not displaying properly in Safari, v 4.0.5

I am having an odd problem with display ads from our local newspaper not displaying properly on my Mac Pro in Safari. I suspect that the issue might be related to having had some AdBlock app on my system a few months ago. I removed the app and some ads display, but others are just a white block with nothing inside. Is there any way to figure out why the content doesn't load?
The website is http://www.echopress.com
The ads I'm having issues with are the 300x250 ads in the right 3rd column, located directly below the weather info and above the "marketplace" ads.
Any ideas or troubleshooting tips?
Thanks,
Grady
Oh, why do I wanna see em in the first place? I'm an advertiser on the site and would like to see my own ads load occasionally.

Hey ho, Grady!
I can see all the ads on the right,
with the exception of the very top (first) box
which has the header of "Weather Alerts).
It's blank, and I'm assuming you have no alerts at the present.
All the rest of the paid for ads show.
So, what I would do is clear my Safari cache, history, and
in Preferences>Security, clear all the cookies from that site.
Hope this helps.
If you need more info just holler.
Let us know how you're doing, OK?

Some HTML Emails Do Not Display Properly

Similar Messages

Maybe you are looking for