Some images are blank in the windows

Ads appear normal but photos and other images, like the calculator in the yahoo home page or news photos are blank squares. The imac G5 is new. It has a 2.16 GHx processor. It worked normal then developed this problem after a fooled around with the mouse settings. Anybody know how to get the images to appear? If I open the image in another window it appears.

I have experienced similar problems; i.e., Quicktime logo with a question mark displayed in place of frame content or simply blank. Experience varies by webpage.
Go to /Safari/Preferences/Security. You will see 4 choices under Web Content. From experimentation it appears that for website optimized for Explorer, un-checking "Enable JavaScript" will fix the problem but on other websites; e.g., Apple sites, this will disable some links. In other cases leaving JavaScript active and un-checking Enable plug-ins has the opposite effect.
Appears to be a bug in Safari - 10.5 compatibility. Under 10.4 you can try moving QuickTime Plugin.plugin to the desktop from /Library/Internet Plug-ins.

Similar Messages

Import from Leica M8 - Some images are duplicated in the import dialogue

Hello,
I bought Aperture 2 a few weeks ago and am using the most recent version to import images directly from my Leica M8. For reference, I am using a MacBook Air (SSD) with the Aperture Library on an external SATA USB drive (it's too big for my little SSD drive) which is connected to the MacBook Air using a very small Belkin USB HUB (not connected to the mains). The M8 is also connected to the MacBook Air using this HUB.
The majority of the time, when I try to import the images the first few lines of images (at least the first 10 or 20) are displayed in the import dialogue correctly, however, as I scroll down through the images they suddenly start to be duplicated. The duplicate images are exactly the same in all aspects (format, exif info, filename, filetype, etc) except that they have (1) appended to the filename. I only shoot RAW (DNG format) and do not shoot RAW+JPG, so it is not a second jpg image. As soon as this happens with one image, it happens with all following images. Quitting, restarting, etc does not seem to have an effect on this although I have not tried extensively.
It is also worth noting that very occasionally Aperture does see any images on the camera and the only way to get it to see them is to re-boot the Mac and it takes ages to shut down when I do this (spinning wheel in the middle of the screen before it re-starts.
If I remove the SD card from the camera and use it in an SD card reader it imports perfectly, I also do not believe it to be a camera problem as I had the same problem with a different Leica M8 that had to be returned due to a fault. (One or two members of a Leica forum have also reported this problem on occasion and one user reported this consistently when using iPhoto).
Does anyone have any suggestions for my problem?
Thanks,
Phillip

Phillip,
I have a very similar setup to yours:
Apple MacBook Air SSD
External USB 2.0 SATA hard drive
(2) Leica M8 cameras
I used this system, on the road, over the course of the past month, on an extensive project in which I shot and imported over 14,000 RAW picture files. Like you, I only shoot RAW, no JPEG, no RAW+JPEG.
Only once did I notice a duplication in files from a card I imported. However, I cannot say whether it was a problem in the system or human error--I worked round the clock and got little sleep, so it is possible that I may have imported twice on one occasion. However, I know this is not what you are experiencing.
One thing that seems to be different, is our workflow. I make it a policy to never attach a camera directly to the computer to transfers files, but instead, to always use a reliable card reader. I also make it a policy to reformat each card in the camera after every successful transfers so it will be primed and ready for next use. I never reformat a card through the computer and never delete files individually.
Here’s my specific workflow with the setup listed above:
1.) Shoot pictures in RAW (.DNG) format.
2.) Transfer RAW files, by way of a USB High-Speed 2.0 card reader onto internal SSD hard drive and into a designated temporary hold folder.
3.) Replace card reader with external 320GB USB High-Speed 2.0 hard drive.
4.) Import RAW files off internal SSD into Aperture Library which resides on external hard drive.
5.) Tag, review and confirm pictures with inside Aperture.
6.) Take same memory card and transfer same pictures to a 250GB HyperDrive Colorspace for safety backup.
7.) Delete files from designated temporary hold folder on internal SSD to free space up for next session of transfers.
8.) Reformat memory card in camera.
Once I return back to home base, I transfer my Aperture Project files into my Aperture Library on my Apple Xserve RAID setup.
It’s a little cumbersome with the MacBook Air SSD in having an extra step involved in moving files around and swopping out a card reader for a external hard drive but it has served my needs and reduced travel load in weight and size a bit.
I will look out for any future occurrences of duplicate imports and report them here. Additionally, feel free to contact me here, or through the L•Camera Forum, concerning any other issues with our similar setups.
v.b.
geoff

Some images are not appeared on the JButton

Hi all
I want to appear an ImageIcon on my JButton
Some images are appeared on the button when run the code,
but some images are not and the button appeared as a default
button why ?
the problem in my code in this statement
JButton   merc = new JButton (new ImageIcon(" door.jpg " ));Thanks in advance.

I suggest that you break down your statements even further to see where the problem is.
So if this the problem is on this line:
JButton   merc = new JButton (new ImageIcon("door.jpg" )); //string corrected?try to break it up a bit like so:
JButton merc = new JButton();
File imageFile = new File("door.jpg");
if (imageFile.exists())
   ImageIcon icon = new ImageIcon(imageFile);
   if (icon != null)
      merc.setIcon(icon);
   else
      System.out.println("icon == null");
else
   System.out.println("image file doesn't exist");
}

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

The desktop image is fine, taken from the exact same pool of jpg photos. However, as soon as the slide show screen saver comes on, the images are scrambled. What is it about the apple screen saver algorithm that scrambles the pics?

Hi all, when I open a New Tab pg all the images are blank - I've tried clicking on the blank images, & dragging a link from the Bookmarks, without success!

I want to achieve at least one of two things: either set New Tabs to open with Google automatically; or at least, to have Google pinned to the New Tab page. (Google is my home page.) When a new page opens, all the images are blank. I've read through the Help pages & tried various things. I've tried dragging Google from the Bookmarks to the New Tab, but this only opens Google. I've tried clicking on the blank images, but nothing happens. I've toggled the blank images off for now, so at least I don't need to look at them. I am doing a university course online, so efficiency is really important to me! Those extra clicks really add up & distract!... Thanks in advance :)

# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Type '''browser.newtab.url''', in the bar on the top of the page.
# Double click the first result, '''a new window should appear'''.
# Type '''www.google.com''' in the window, click ok.
# '''Open a new tab''', does it go to google?

'Some images are missing because they were deleted from the document'

Hi,
I created a document in Pages v5.2 last week and have just opened it and received the following message:
'Some images are missing because they were deleted from the document'
When I try and replace the missing images I get the following message:
'The image "filename" couldn't be inserted.'
When I try and reimport the original image I get the following message:
'The image "filename" couldn't be inserted. This image is of an unsupported type.'
If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
If I insert the original image into a blank Pages document it goes in no problem.
I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
Alex

I have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
Toolbar > Media insert
Insert > Choose jpg into document
Text Box image fill
Shape image fill

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Some images are showing with some red color ¿how do I return to original colors?

I`m using Mountain Lion and everything works right. Only some images are showing with a redish color. The first example is my cover photo in fb. When I click it, it returns to the original color. Anyone who has this problem and know how to fix it?
This is fb cover preview:
This is the original, when cliked:
It happens with some thumbnails too.

Hi Klaus,
this didn't solve my problem but helped me choose Firefox over Safari.
thanks for the reply.
mark

[svn] 663: Fix SDK-14201: Performance: embedded images are written into the swf one byte at a time.

Revision: 663
Author: [email protected]
Date: 2008-02-26 13:56:08 -0800 (Tue, 26 Feb 2008)
Log Message:
Fix SDK-14201: Performance: embedded images are written into the swf one byte at a time.
This changes the way swfs are written out when they contain embedded lossless images,
such as PNGs and GIFs. The old code had a loop to write a byte at a time; the new code
does a single biblt. The result is a modest compilation speedup, on the order of
several hundred milliseconds when compiling Flexstore.
(This already went into the trunk as revision 658.)
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-14201
Modified Paths:
flex/sdk/branches/3.0.x/modules/swfutils/src/java/flash/swf/TagEncoder.java

Hiya, Mike,
It's pretty tough to work through pasted-in code. If you can, please upload a page to a server, so we can see your pages in context. We'll be able to download it and look at it.
That said, you can do this: Find the beginning of an editable region in Code View. It will look like this:

Click anywhere in that tag, between the opening bracket and the closing bracket.
Then, on the vertical toolbar on the left side of the Code window, click on the "Collapse Full Tag" button. It is the one with two arrows pointing at each other. This will collapse that entire editable region. Then click the button with the two arrows pointing away from each other. That will re-open the editable region, but will highlight it.
If you have nested regions, you will find the other inside one of the editable regions. If you copy the <!-- InstanceBeginEditable and do a search on it in that document, you will find the nested region.
Beth

Images are blanked out when forwarding a message....any fix?

When I forward a message with Thunderbird 3.0.6, the images are blank with a red icon in the top left corner. The message is being sent as HTML and Text.

Thunderbird support is over here.
[http://www.mozillamessaging.com/en-US/support/]
or here:
http://forums.mozillazine.org/viewforum.php?f=39

What services are added to the Windows system?

After installing of Oracle Coherence, configuring the members and adding the ReplicatedCaches on the Windows XP system, what services are added to the Windows system?
Thank you

You would have to use a java service wrapper to run the coherence as a service on windows.
Here are some that work:
http://wrapper.tanukisoftware.org/doc/english/download.jsp
http://sourceforge.net/projects/wrapper/

Invisible windows appears when trying to open a new window. These windows are listed in the Window list, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.

I cannot open a new window for FireFox.
Invisible windows appears when trying to open a new window. These windows are listed in the Window list on the menu, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.
The Downloads Window cannot be accessed either.
This is very annoying. Is this a bug? Or is there a fix.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I have multiple iPhoto libraries w/ duplicates in several. How can I consolidate and find the dupes? Some photos are versions of the original.

I have multiple iPhoto libraries w/ duplicates in several. How can I consolidate and find the dupes? Some photos are versions of the original. On my iMac, I also have many folders containing some of the same photos. My computer is used for both personal and business purposes. My libraries should be separated, one for each.

To merge libraries use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - or Aperature
To find duplicates within an iPhoto library use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -
Photos that are not in an iPhoto library can be imported telling iPhoto not to import duplicates (an imperfect procews) and then IPLM can find the duplicates
As to keeping seperate libraries - only you can do that - IPLM can move photos between libraries for you but only you can know which photos should be in which library
LN

Suddenly all my albums in Photos are blank. The photos are still in the camera roll but not in the albums. What happened and how do I recover them all? Are they in my icloud? Also the photos are clear as thumprints but when I touch it to zoom are blur

Suddenly all my albums in Photos are blank. The photos are still in the camera roll but not in the albums. What happened and how do I recover them all? Are they in my icloud? Also the photos are clear as thumprints but when I touch it to zoom are blurry. what gives? They were all completely clear and in the albums when I last used my ipad?? Would doing the "Reset" under General settings do that? When I returned from Europe I reset my ipad to get it in the right time zone etc.

Reboot. Press and hold the home and sleep buttons until the apple logo appears. Ignore the red slider.

Some images are blank in the windows

Similar Messages

Maybe you are looking for