Some images disappear in Safari after page loads

On some webpages, there's a problem with Safari showing images. For a brief second, the image appears and then a blue question mark inside a blank square appears where the image had been. When I load the same webpage with Firefox the image shows without a problem. I've disabled the few extensions I'm running in Safari to no avail. Again, with or without extensions, Firefox displays properly (they're both using the same extensions). I'm using Yosemite 10.10.2 with Safari 8.0.4. Any thoughts would be greatly appreciated. Thanks!

Start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
Test. After testing, restart as usual and post the results.

Similar Messages

How to execute a method after page Load?

My question is very similar to what was discussed in following thread:
How to execute a method after page Load?
My requirement is that I want to run a method in backing bean of a page, immediately after the page gets loaded. In that method I want to invoke one of the method action included in the pagedef of this page, conditionally.
I tried using the approach given in the above thread, i.e to use <f:view afterPhase="#{backing_security.setPermPriv}">, but the problem is that our page is not using 'f:view' , so I explicitly added one f:view with afterPhase property set , but it is not working, page it self is not getting loaded, it is throwing the error:
Root cause of ServletException.
java.lang.IllegalStateException: <f:view> was not present on this page; tag [email protected]e8encountered without an <f:view> being processed.
     at org.apache.myfaces.trinidad.webapp.UIXComponentELTag.setProperties(UIXComponentELTag.java:108)
     at javax.faces.webapp.UIComponentClassicTagBase.findComponent(UIComponentClassicTagBase.java:733)
     at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1354)
     at org.apache.myfaces.trinidad.webapp.UIXComponentELTag.doStartTag(UIXComponentELTag.java:71)
     at oracle.adfinternal.view.faces.taglib.UIXQueryTag.doStartTag(UIXQueryTag.java:41)
     at oracle.adfinternal.view.faces.unified.taglib.UnifiedQueryTag.doStartTag(UnifiedQueryTag.java:51)
     at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:50)
     at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:262)
     at oracle.jsp.runtime.tree.OracleJspNode.execute(OracleJspNode.java:89)
     at oracle.jsp.runtimev2.ShortCutServlet._jspService(ShortCutServlet.java:89)
     at oracle.jsp.runtime.OracleJspBase.service(OracleJspBase.java:29)
     at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:665)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:387)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:822)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:746)
Please help to resolve this issue, or am I doing anything wrong?

Hi,
I assume that your view is a page fragment and here - indeed - the f:view tag cannot be used. If you use ADF then one option would be to use a custom RegionController on the binding layer to listen for the render phase to invoke the method. Another option would be to use a hidden field (output text set to display="false" and have this component value referencing a managed bean property. The managed bean property's getter method can now be used to invoke the method you want to run upon view rendering
Frank

How to Set icon/image programatically in ADF before page loads

This is my UI:
Depends on the condition i want to set icon/image programatically in my java code.Before page load im calling this method.
So i couldnt take binding value also,it throws null pointer exception.Then i tried setting icon/image programatically.
<af:commandImageLink text="settings" icon="#{bean.iconsettings}" binding="#{bean.bind}"> </af:commandImageLink>
My bean:
private RichIcon iconsettings;(its getters and setters)
private void method(){                         // method
if(cond){
this.iconsettings="/images/20.jpg";   //trying to set icon in a string.but it throws me error that cannot set RichIcon to string.
else
this.iconsettings="/images/19.jpg";
Could any one tell me how can i set icon/image in java code.Before page loads im performing all above said tasks.Please help.

Well, you set the icon property to a bean method, which you have done. The bean method however need to have the signature
public String getIconsetting()
// your code returning hte path to the icon
if(cond){
     return ="/images/20.jpg";   //trying to set icon in a string.but it throws me error that cannot set RichIcon to string.
else {
     return ="/images/19.jpg";
The bindproperty is not needed, remove it and remove the RichIcon Iconsettings too´as it's not needed to and is the wrong type anyway.
Timo

Content getting disappear after page load in safari

Content of the webpage get dissappear after the page load in safari. I am currently using IOS7.1 in my ipad mini
Url:
http://wealthforumezine.net/ThinkBIGBusinessPerspective230314.html#.UzAF2PmSyrM
http://wealthforumezine.net/FundFocusSBI180314.html#.UzAF6fmSyrM
the website is devloped using HTML 4.
Thanks in advance

I have a similar problem in Leopard with Safari not loading pages correctly. I'm trying to troubleshoot now, so let me ask you some questions to see if its the same problem as mine.
Are you using an administrator account? On my machine it only acts up on non-administrator account.
Does Firefox or another web browser load the pages correctly? On my machine it has similar problems to Safari.

Major annoyance - Safari switching tabs/windows after page load

When I cmd-click on a link to open a page in a new tab, it starts to load the page. If I switch tabs or windows before the page is loaded, it will switch back to that tab/window when the page load is complete.
Who thought this would be a good idea?!? This is the kind of impossibly poor user interface that I expect when I run Windows. Why has it infected my Mac? I DO NOT WANT MY SOFTWARE CHANGING MY INTERFACE ON ME!!! When I bring a tab or window to the front, I expect it to STAY in the front!!!!!
PLEASE, FOR THE LOVE OF EVERYTHING SANE, FIX THIS NOW APPLE!!!

BTW, this does not happen all the time - only on certain pages. A good example is the Washington Post. Click on an article, then switch to a different tab/window before the page completes loading. When the page load completes, it will switch your tab/window, bringing the article to the front. Very annoying.
I suppose if could be an issue with the site using some severely twisted JavaScript. However, I have never seen this behavior before in Safari until very recently, and it does not happen in FireFox.

Loading... spinner persists after page load complete

Our site uses Ajax and web-services to build html content. At times, the spinning "Loading..." image continues endlessly, seemingly after the page load is complete. This behavior does not occur with Chrome, IE or Firefox. Using the Web Inspector, it appears that all images, xml docs, web-service calls, etc. have completed successfully. To see an example: http://www.bunkerhill.com/dev/website/WebMessages.aspx
Any help is appreciated.
TIA

Is the site entirely Safari compatible? Maybe some part of it isn't working in Safari, and the browser is still attempting to make it work. I'm not a coder (I can barely do anything with HTML), so what I just wrote might be of no use to you.

Images are not showing when page load

Hello All
I am having lot of webparts on my page.
In two of them webpart i applied xslt and showing image of created by person in this
1)Announcement webpart(Wall updates)
2)Showing blog using content by query webpart(Blogs)
While page loading not able to load images in both webpart view.
But when i decreases webparts on page images rendered properly.
I think it is taking time to fetch images so timeout and showing default images.
Kindly suggest me some way to tackle and images will displayed properly
Thanks in advance
Varsha Patil

Hi,
According to this documentation from MSDN about
SharePoint Server 2010 capacity management: Software boundaries and limits:
“In SharePoint Server 2010, there are certain limits that are by design and cannot be exceeded”, “The default values for these limits were defined by testing, and represent the known
limitations of the product. Exceeding supported limits may cause unexpected results, significant decrease in performance, or other harmful effects”, “in most cases, operating at or near an established limit is not a best practice, as acceptable performance
and reliability targets are best achieved when a farm’s design provides for a reasonable balance of limits values”.
So it is not recommended to add many web parts into one page.
If there is a special need to display many web parts in one page, it is recommended to reorganize the content to minimize the number of web parts in use and customization will
be needed sometimes if the built-in web parts can’t meet the requirement.
Best regards
Patrick Liang
TechNet Community Support

Text shifts after page load

When viewing my site online, the page loads and then the text sometimes shifts and re-positions slightly. Long text blocks may even re-format and become one line less in height. This happens in Safari, Explorer, and Mozilla on Mac and Windows. This only happens occasionally but, where it happens, it is consistent and happens every time. I am using Arial standard font, left justified only, and default text settings for space and inset. So no special font or settings at issue. This happened with iWeb 08 as well as 09.
Any ideas please ... it makes my site look so scruffy ...... :o(

Sorry to be slow in coming back on this but I wanted to try Roddy's solution before troubling anybody further. Loosening the text boxes has indeed done the trick. The amount need to loosen is surprisingly large in some cases, and it took several attempts to get everything OK.
Thank you both for replying so quickly. If you want see the results of your advice in a problem free site then go www.cambiguities.com. It is my first attempt at a site and is quite ambitious for a first go. I am a photographic illusion creator and it is my showcase. Who knows ..... you might enjoy it ...... ;o)
Thanks again

Cpu not releasing after page load

I'm a newby to flash. I need to show movie clips based on the
XML data. The problem is after page is loaded with flash file,
still CPU is not getting released. What am I doing wrong? After
page is loaded with the flash file, I want the CPU to go its
original utilization.
Here is the sample code.
import flash.geom.Matrix;
import flash.geom.Point;
import flash.display.*;
import flash.geom.*;
import mx.services.*;
_root.lineStyle(1, 0x0000FF, 100);
var mcMapContent = map_sp.content;
var my_xml:XML = new XML();
my_xml.ignoreWhite = true;
var number_fmt:TextFormat = new TextFormat();
number_fmt.font = "NumFont";
number_fmt.size = 4;
var fileName:String;
if (!fileName)
fileName = "test1";
if (_global.styles.List == undefined)
_global.styles.List = new mx.styles.CSSStyleDeclaration();
_global.styles.List.setStyle("themeColor", 0x3366CC);
_global.styles.List.setStyle("color", 0x000000);
_global.styles.List.setStyle("backgroundColor", 0xFFFFFF);
_global.styles.List.setStyle("borderStyle", "solid");
_global.styles.List.setStyle("borderColor", 0x000000);
_global.styles.List.setStyle("rolloverColor", 0x5a6970);
_global.styles.List.setStyle("scrollTrackColor", 0xEEEEEE);
_global.styles.List.setStyle("selectionColor", 0xCCCCCC);
my_xml.load("XML/" + fileName + ".xml");
my_xml.onLoad = function(success)
var currentNode:XMLNode = my_xml.firstChild.firstChild;
var LoopI:Number;
var tmpDepthLevel:Number;
var X1:Number, Y1:Number, Length:Number, Width:Number;
var Code_str:String;
currentNode = currentNode.firstChild;
tmpDepthLevel = mcMapContent.getNextHighestDepth();
try
for (var child_xmlnode = currentNode; child_xmlnode != null;
child_xmlnode = child_xmlnode.nextSibling, i++)
TotalVertex_int =
Number(child_xmlnode.attributes.VERTEX_COUNT);
X1 = child_xmlnode.attributes.X1;
Y1 = child_xmlnode.attributes.Y1;
Width = Number(child_xmlnode.attributes.WIDTH);
Length = Number(child_xmlnode.attributes.LENGTH);
Code_str = child_xmlnode.firstChild.nodeValue;
var my_mc:MovieClip = mcMapContent.attachMovie("MyRect",
Code_str, tmpDepthLevel, {Name:Code_str});
tmpDepthLevel++;
my_mc._x = X1;
my_mc._y = Y1;
my_mc._width = Width;
my_mc._height = Length;
newMainColor = new Color(my_mc.rect_mc);
my_mc.Num_txt.setTextFormat(number_fmt);
name_fmt.font = "NumFont";
newMainColor.setRGB(0xFF99FF);
my_mc.Num_txt._yscale = my_mc.Num_txt._yscale * (Width /
Length);
my_mc.Num_txt._y = (20 - my_mc.Num_txt._height);
my_mc.Num_txt._x = 0;
catch (myError:Error)
trace("error caught: " + myError);
finally
//trace("No Error");

I'm a newby to flash. I need to show movie clips based on the
XML data. The problem is after page is loaded with flash file,
still CPU is not getting released. What am I doing wrong? After
page is loaded with the flash file, I want the CPU to go its
original utilization.
Here is the sample code.
import flash.geom.Matrix;
import flash.geom.Point;
import flash.display.*;
import flash.geom.*;
import mx.services.*;
_root.lineStyle(1, 0x0000FF, 100);
var mcMapContent = map_sp.content;
var my_xml:XML = new XML();
my_xml.ignoreWhite = true;
var number_fmt:TextFormat = new TextFormat();
number_fmt.font = "NumFont";
number_fmt.size = 4;
var fileName:String;
if (!fileName)
fileName = "test1";
if (_global.styles.List == undefined)
_global.styles.List = new mx.styles.CSSStyleDeclaration();
_global.styles.List.setStyle("themeColor", 0x3366CC);
_global.styles.List.setStyle("color", 0x000000);
_global.styles.List.setStyle("backgroundColor", 0xFFFFFF);
_global.styles.List.setStyle("borderStyle", "solid");
_global.styles.List.setStyle("borderColor", 0x000000);
_global.styles.List.setStyle("rolloverColor", 0x5a6970);
_global.styles.List.setStyle("scrollTrackColor", 0xEEEEEE);
_global.styles.List.setStyle("selectionColor", 0xCCCCCC);
my_xml.load("XML/" + fileName + ".xml");
my_xml.onLoad = function(success)
var currentNode:XMLNode = my_xml.firstChild.firstChild;
var LoopI:Number;
var tmpDepthLevel:Number;
var X1:Number, Y1:Number, Length:Number, Width:Number;
var Code_str:String;
currentNode = currentNode.firstChild;
tmpDepthLevel = mcMapContent.getNextHighestDepth();
try
for (var child_xmlnode = currentNode; child_xmlnode != null;
child_xmlnode = child_xmlnode.nextSibling, i++)
TotalVertex_int =
Number(child_xmlnode.attributes.VERTEX_COUNT);
X1 = child_xmlnode.attributes.X1;
Y1 = child_xmlnode.attributes.Y1;
Width = Number(child_xmlnode.attributes.WIDTH);
Length = Number(child_xmlnode.attributes.LENGTH);
Code_str = child_xmlnode.firstChild.nodeValue;
var my_mc:MovieClip = mcMapContent.attachMovie("MyRect",
Code_str, tmpDepthLevel, {Name:Code_str});
tmpDepthLevel++;
my_mc._x = X1;
my_mc._y = Y1;
my_mc._width = Width;
my_mc._height = Length;
newMainColor = new Color(my_mc.rect_mc);
my_mc.Num_txt.setTextFormat(number_fmt);
name_fmt.font = "NumFont";
newMainColor.setRGB(0xFF99FF);
my_mc.Num_txt._yscale = my_mc.Num_txt._yscale * (Width /
Length);
my_mc.Num_txt._y = (20 - my_mc.Num_txt._height);
my_mc.Num_txt._x = 0;
catch (myError:Error)
trace("error caught: " + myError);
finally
//trace("No Error");

Using af:clientListener after page load

Hi,
I need to run a js function after* the page finishes loading.
I tried to use <af:clientListener type="load" method="fillProjectList"/>, but the script starts running before the table on the page finished loading.
The table has: clientComponent="true"
How can I make the script to start runng only after all table components are loaded?
Thank you,
Nina

Ah.. i guess it will not work as you cannot do any UI activity after the render response phase. May be try this
Javascript into JSPX and run after page is loaded?

Javascript before/after Page Load

hi, i want to call javascript before or after page is loading,
is it possible?

Hi,
Under Page Rendering--->
Open the page definition
Under --> Display Attributes
change to 'Donot focus cursor'
In Page html body attributes
enter --> onload="set_focus();"
bye
Srikavi

Spry Accordion - Tabs open and then close after page loads

I am using a Spry Accordion menu driven from a database.
The menu opens up during the page load and then closes.
I'm using SpryAccordion.js 1.6.1
And to open a preset tab, I'm using:
<script type="text/javascript">

</script>
But, all of the tabs open and then close on page load.
My page:   http://www.texashotjobs.us/00C01.aspx
Any fix for this??
Thanks, Ron

Well to both thanks. Actually I wasn't disappointed as I had a two part question...
I tested the 1.6 JS and remembered that I had to modify the 1.4 so that tabs actually would link. So I reverted back to 1.4.
So, going to 1.6 fixed the open panel on load but "unfixed" the panel tab from linking.....
So changing this in the 1.6 js fixed the link issue as well:
Spry.Widget.Accordion.prototype.onPanelTabClick = function(e, panel)
    if (panel != this.currentPanel)
        this.openPanel(panel);
    else
        this.closePanel();
    if (this.enableKeyboardNavigation)
        this.focus();
//    if (e.preventDefault) e.preventDefault();
//    else e.returnValue = false;
//    if (e.stopPropagation) e.stopPropagation();
//    else e.cancelBubble = true;
I t appears everything is working........
Thanks, Ron Gaddis
Visual Reality Productions

Indesign Exporting to PDF... Some Images Disappear

I have searched forums and elsewhere with no luck on this issue. I am exporting to PDF from InDesign CS 5.5 and some images are missing. Images are linked correctly and the problem also happens when I now export older files which exported perfectly fine before.
I have tried removing and replacing images with no success.
Problem was not occuring before Christmas but started the day I returned from vacation on Jan. 3. No new software has been added.
For a few weeks I have been getting the following error when closing... have been ignoring it... The instruction at 0x00978b83 reference memory at 0x0b159f40. The memory could not be "read"
Any thoughts appreciated! Thanks.

Well it was a long shot. Do you run Suitcase? If so, have you updated it recently? There was a problem with Suitcase and links a month or so ago, but I don't recall if it was in PDFs. Might have been link modification dates.
What sort of images are we talking about? Did you make the layouts, or did they come from outside? OPI comments can casue this, and files from Quark users often have them -- they are on by defualt in Q.

ADF Question: included jsp action firing after page load

Hi all,
I am using JDeveloper 10.1.3.3 and ADF + BC.
Here is another interesting situation for you. I have a page with an included jsp at the top with tabbed navigation.
My page is for entering an order. Users can have multiple orders "open" in other tabs at the same time. Users can also have many other non-order pages opened in tabs. We are using the same View Objects (Entity Based) along with Transient View Objects on each order.
Each order tab needs to "remember" the orderId so that when the user clicks on a tab, the appropriate rows are set in the order that is to be "opened". This occurs in a tab's action() - setting the orderId and forwarding to the appropriate page (if different) or reloading the same page with the new id.
On page load we try to get the tab's orderId and load that as the current row of all of our view objects. This should make it seem like they are all concurrently running.
The problem is when going from order to order, once the tab is clicked, the page's OnPageLoad method runs BEFORE the action of the tab click is processed. Therefore the order that loads thinks it is the previous order, and does not load the correct View Object rows.
Does anyone know how we can force the tab action to occur before the page load so that we can get the proper orderId?
Thanks,
Heather

Thanks for your speedy reply Frank,
We are using the onPageLoad from the OnPageLoadBackingBeanBase which implements the PagePhaseListener.
In this we are doing something like:
        if (isPostback()) {
            String selectedTabNum =
                EL.getAsString("#{TabCounter.currentSelectedTab}");
            String test = EL.getAsString("#{TabCounter.tabOrderId" + selectedTabNum + "}");
            System.out.println("tab num " + selectedTabNum);
            System.out.println( "testing " + test );
        }our tab counter (a session bean) has these two methods (among others):
    public void setCurrentSelectedTab(int currentSelectedTab) {
        this.currentSelectedTab = currentSelectedTab;
        for(int i=1;i<= 20; i++) {
            EL.set(BACKING_START+"selectedTab"+i+"}", false);
        EL.set(BACKING_START+"selectedTab"+currentSelectedTab+"}", true);
    public String getNextAvailableTab () {
        for(int i=2;i<=20;i++) {
            boolean isTab = (new Boolean (String.valueOf(EL.get(BACKING_START+"render"+i+"}")))).booleanValue();
            if (!isTab) {
                return String.valueOf(i);
        return "0";
    }our tab header (request bean) has this method as the action for clicking a tab:
        System.out.println("handleTabNavigation");
        String componentId = actionEvent.getComponent().getId();
        String selectedTab = componentId.replaceFirst("tab","");
        int selectedTabNum = new Integer(selectedTab).intValue();
        EL.set("#{TabCounter.currentSelectedTab}", selectedTabNum);
        String tabType = EL.getAsString("#{TabCounter.tabType"+selectedTabNum+"}");
        if (tabType.equals("regular")) {
            String orderId = EL.getAsString("#{TabCounter.tabOrderId"+selectedTabNum+"}");
            EL.set("#{processScope.unfinishedHeaderId}", orderId);
        } else if (tabType.equals("standing")) {
            String orderId = EL.getAsString("#{TabCounter.tabOrderId"+selectedTabNum+"}");
        }Thanks,
Heather

InContext editing bar disappears quickly after page loads

Hello! I am working on a client site and was able to successfully edit pages yesterday. But, today as I was trying to work on it, I noticed that I cannot go into edit mode from the website (using command + E).
When I go to the site and try to enter edit mode, I can see the edit mode bar at the top for a second, but it quickly disappears.
Please help! I am so frustrated. I have spent hours trying new things.
Thank you!

Hello Jackie,
I took a look at your page and I can see the problem. You've created a repeating region, but you don't have any editable regions within the repeating region. You'll simply want to apply editable regions to your table cells (<td> tags).
Since you're starting out with some content that will likely become outdated. You probably want to apply the repeating region around each table instead of one repeating region around all tables. This way your client will be able to remove each listing image/information region individually, or repeat/edit each one individually.
Please let me know if you need more information.
Best regards,
Corey

Some images disappear in Safari after page loads

Similar Messages

Maybe you are looking for