Some info for use WebDB 2.2

If you have some news, url's or documentation for use and understand WebDB 2.2 ...
By mail if possible...
[email protected]

We are currently using WebDB 2.2.0.0.5 installed as a cartridge under OSA 4.0.8.1.
Where does one go for Patches to WebDB 2.2.x.
I am having problems with forms and LOV's.
Stuff worked in WebDB 2.1 fine but not in 2.2
null

Similar Messages

Jaxa xml tutorials, does anyone have some tutorial for using xml in java??

jaxa xml tutorials, does anyone have some tutorial for using xml in java??
can be dom,sax,jaxp whatever....
i try to find in google but din't find any complete one....

dapim wrote:
jaxa xml tutorials, does anyone have some tutorial for using xml in java??
can be dom,sax,jaxp whatever....
i try to find in google but din't find any complete one....I would imagine anyone here would just produce the same set of hits that you did, so why waste our time doing it only to direct you to the same one(s) you already found and rejected.

PYRO A/V Link XP,Vista, & Win7 switch settings + info for use in PE7

I see a lot of confusion regarding capture glitches and switch settings using the PYRO A/V Link. I looked at Canopus and others before I bought this one because it fit my budget. After I bought it I went through the glitches and the Support system of ADS Tech problems that others are experiencing.The settings I use worked on my Vista 32 bit laptop and without a hitch when I got my Windows 7 64 bit desktop using PE7. I"m sure they will work for PE8. I have a ton of VHS tapes that I am working with so my point of reference is for VHS capture. I am also using NTSC.
If you are ordering one what you will be ordering is an API-558-EFS. Or maybe you are using one of the API-550 units. Thjis information should work fine for the 550.   There is NO API-558 unit unless this has changed since I bought mine. The BOX with an API-557, a power cord, and an outdated API-550 user manual is what constitutes an API-558. I know this because an irate ADS Tech rep told me. I emailed to find out why I didn't get an API-558 and that is what I was told. "We no cheat you. You got what you pay for".
I checked for updated drivers and info from ADS Tech and found a REVISION E. You can go online to their website and print it off if you like but I will dialog on this revision in the switch settings. I tried to get the ADS Tech rep to give me a serial number break as to when they changed from the 550 to the 557 units but did not get an answer. I think he said REV.E started with the API-557 but who knows seems to be answer.
Switch settings: I use #1 DOWN #2 UP #3 DOWN #4 DOWN and here are the reasons why.
The API-550 booklet/user manual shows a few windows versions. I refer to Windows XP because Vista and Win 7 seem to be offshoots of XP.
SWITCH NO. 1   for the API-550 (the API-557 and Vista and Win 7 are not in there) says DOWN for NTSC and Up for PAL . REV E says this has been changed to a black level (Color IRE) down being 0 IRE and up being 7 IRE(default). The ADS Tech rep told me the new unit Automatically detects NTSC or PAL. Do I believe him? Not at this point in time.
SWITCH NO.2 was not changed with REV.E    UP for XP, Vista, and Win 7
SWITCH NO.3 was not changed with REV.E    DOWN for XP, Vista, and Win 7
SWITCH NO.4 was originally (for the API-550) DOWN for LOCKED AUDIO and Up for Unlocked Audio. REV E. changed this to   Down =12-bit/32kHz and   Up =16-bit/48kHz Audio Sampling Rate
At this point in time I believe I have an API-550 with an API-557 sticker on it. My reasoning is that I import one long stream (60 to 90 minutes) of video from VHS into PE7 without stopping and after making a DVD where the video and sound separated further and further to about 5 minutes off at the end. I went back to switch #4 LOCKED AUDIO. I also didn't care about black level so I set the #! Switch DOWN fo make sure of NTSC. Depending on which unit you think you have you can experiment with the first and last switches. It is possible on short video you might not notice the video/audio separation. ALSO PE7 identifies the unit as an API-550 at the top of the capture screen/panel.(Capturing Device) Whether or not this is the result of windows drivers I don't know.
Connections I have a VHS/DVD Recorder unit with HDMI and Component Video (3 Video and R & L Audio) output. The PYRO AV link has Component Video IN which I use and the Canopus did not as I recall. I don't know what the other various units have as they were over my spending limit. The quality of Video I get seems really good.. If you are thinking about upgrading your VHS player look on the Back of the unit you think you want to buy and see if it has the Component Video output. The users guide says for DVD player out on my machine but works fine for VHS out. To connect the Pyro to computer you need Firewire as others have said. No USB connection.
One Major Glitch;   Get off the Internet (as others have said) before you start trying to do video. This is even more important with an underpowered computer. My laptop had a switch I would flip to disconnect. My desk top Internet connection has to be disabled. or unplugged from router, or turn router off if you don't need it for other computers. If you don't know how to watch your task manager learn how to bring it up and watch it to see cpu and memory usage and the ammount of processes being used. RESTART the computer maybe more than once. What you will notice will be the number of processes being used will drop and the ammount of memory being used will drop. Restarting seems to dump all the Internet garbage at least till you get back on again and surf around and collect it again. I used to leave mine off the internet for several days and the movie making went smoothly. On my laptop it took up to 10% of the memory and the desktop takes 6+% of 12GB just to be on the internet. I started noticing this early on when things would lock up and I would have to restart anyway.
Starting; After you get off the internet, restart, bring up the task manager, and watch till things settle down to about 0 cpu usage, start PE7 or whatever Video program you want. Watch the task manager again and when everything is down to about 0 cpu usage, start a new project in the welcome screen. Where you want to put your project and how you name it is up to you. I make a new folder and put Everything in there. If you use an external hard drive make sure you dont forget to have it hooked up and on when your video program goes looking for projects the next time you open one up.
After you push ok and the selections come up for what type of video you are working with Click on the NTSC DV and it will give you a choice of 4:3 or 16:9 Wldescreen. I use the standard 4:3 because all of my footage is old and when playing a DVD later on, the newer TVs seem to be able to widen it out and on older TVs things look normal anyway. I click done and when mainscreen comes up select Get Media. I again select DV ( Camcorder) and the capture Window opens up.
I fire up my VCR, put a tape in and plug in the PYRO unit. I don't know if that's bad or not, I just got tired of pushing the teeny power button on the unit so I just plug or unplug the PYRO power cord. If the red light is not on the front of the PYRO push the button next to it and hold briefly. When you let go the Red light should be on for Analog. When you hook up one of these to the computer Windows may install a driver. Some firewire devices say you don't need a driver. With the PYRO TURNED ON, if you open up DEVICE MANAGER you will see the Pyro show up under IMAGING Devices. Imaging Devices does not show up in my machine until the PYRO is plugged in. Then when Imaging Devices shows up mine says AD API-550. Click on properties,then driver, and windows shows a driver. Says its an older driver but it works. If you don't see it listed before you try to import video you may have other issues.
Play some video through your VCR and make sure the light stays Red on the Pyro. You should see the Video in the Capture Window and also hear the audio. I let my VCR do some auto tracking, play and rewind and zero the counter when I reach the point I want to push the capture button. After a few times you can pretty much tell where the tape needs to be at the point you push capture. When capturing it will say capturing and a red line will appear around the window. If you push pause, that segment is pretty much a done deal. If it didn't capture enough video you may have to rewind and capture again and leave the first capture out of your project.
If you have glitches or the capture is screwy you may have to exit the project (save it if you alrerady have existing material in) RESTART and try again, or delete and start over. Once you learn what you want to do you shouldn't have that problem. I also learned early on to NEVER push the close button in the upper RH corner to close PE7 as you would normally do to close a window or program. PE7 didn't like that. Always use File and EXit.
Always wait for PE7 to settle down on each step before you try to do other things or you are going to lock things up depending on how fast your machine is. I have the Task manager to always be on top of other windows (under options at the top of Task Manager window). If it gets in the road I minimize the window and bring it back up whenever I think things are moving slow or I want to check something.
I have used this procedure for other movie programs and capture always works. Hope it works for others using PYRO. Hopefully I was to the point and this makes sense. Bill Hunt suggested I maybe post this to Muvipix but when I visited the Muvipix site there was Pyro stuff all over the place and I wasn't sure where to post. Maybe after he reads this he may not want me to post. Or If he thinks its ok material maybe he can scoot it over to Muvipix for me. Thanks again. I will watch this post to see if I was unclear on anything. Or if you guys clear up any mistatements you think I made.

Steve,
I am pleased you thought this was good info. Please use it as you think it will do the most good. The reason I posted it to the main forum is because I am a novice when it comes to forum use. I wasn't aware of the fact there were sub forums (so to speak) until recently. The same for Muvipix.
What I mean is, that when I first found Adobe forums I was only looking at the main forum for answers, as I would guess other novices are doing. I found the PE portion, and that was as far as I went unless you guys had links to other stuff, and even then it didn't dawn on me that there was a Tips & Tricks or hardware sections, etc. I would type in PYRO for example, and if nothing came up in the main forum first to redirect me to something else, I thought that was all there was. Don't know if there are other novices thinking the same thing.
I apologize for my ignorance on posting to Muvipix. The format seems to be different and I found Pyro discussions there which seemed to be in several sub forums? So I posted here first and the only knowledge I have about sending this material to Muvipix (outside of re-typing the whole thing) would be to copy and paste it. (Bring up Muvipix in a separate Internet window along side Adobe and copy/paste). Sounds dumb, but as I said I am still computer illiterate. Also which section of Muvipix would I post it under? I'm pretty sure you guys have a better way of posting the same material in both forums at the same time than copy/paste.        Thanks for the info.

Nead some advice for using DDE icons

Hello everyone,
1°)I am using DDE in my programm. I need to get and send many information to the instrument I am communicationg with. I would like to know if have to use the DDE start,check, or poke icons for each piece of info I want to get? Because that takes a lot of space in my prorgam. Is there any other way?
2°) I am also looking for some DDE application notes. Don't seem to able to find any on the NI web site...any idea?
Any help would be great,
regards,
David

Actually, the best place for info on the DDE VIs is Microsoft's website. The functions within LV are apparently very simple wrappers around the Windows function calls so you follow the basic procedural flow in MS's docs and it should work.
Typically you have to open a session specifying a "service" and "topic", you can then "request" (read) or "poke" (write) "items".
And yes, you typically have to read or write one value at a time. It all depends on the "items" that the DDE service you're accessing implements.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Does anyone know where I can get some images for use with Titler Pro 3?

I am really just trying to get some effects like honeycomb or different color washes for reflections. Maybe explosions. They are all put to use from a image if I am not mistaken, new to Titler Pro 3.

That is not an Adobe program... ask the company that sells that program... NewBlueFX | Best-selling, easy-to-use video editing plugins

AU filters, and some suggestions for use

I have just discovered the powerfull AU filters for the tracks, and would like some overall suggestions on their use. I have read on many forums and posts on what each one is, but my question is more on the line of when is enough enough, and can you degrade a file, like an image file, by too many filters?
Example one: Podcasts. Plain recording of vocal track with no efffect. After the recording, my thought is too apply the AUlowpass to take out the highend and clean up the sound. Then, maybe the AUMatrixReverb to fill it out.
Then, on the MasterTrack, apply the AUMultiband Compressor to balance the output. Is this something that would be ok?
Example two: Vocal recording project. Apply AUfilter to the backing instramental track to make it the way you want...
Record vocals again plain, vanilla, no effects. After the recording, add AUlowpass if needed, maybe AUGraphicEQ to shape the vocals, then do the MasterTrack effect as above.
I guess I would just like some more suggestions from people in the know on some use of the AU filters and how to do it best.
Thanks,
Cory

First, yes, you can degrade output, because a filter (by definition) changes the signal. However, if you use them carefully, they will enhance the sound. You don't have to worry about signal processing artefacts of too many filters in a row, since the design of the AU filters seems to be quite good. But in the end, your ears have to be the judge: why should you worry about degradation if you like the result?
About the low pass filter: normally, parametric EQ is used to cut specific frequency bands. E.g., if you have some trouble in the higher frequencies, it is unlikely you need to cut all of it, which is what a low pass filter does. This will make your mix sound dull. A parametric EQ can apply a much more precise and subtle edit, and at different places (most mixes also benefit from cutting the higher bass a little bit). EQ can also be used to boost. E.g., a slight increase around 12kHz can give some "air" to the mix.

Any info for using OverLayLayout?

Does anybody have info or any demos using OverLayLayout manager?

Jerry,
I have had some exposure to Sun Fire servers running Oracle. The disk was made highly available using the Veritas database cluster software. Both servers share the database files stored on a storage array network. Also Volume Replicator is available via Veritas/Symantec.
You can check the other compatible HA software on;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d70a790-0201-0010-97a0-fdcb2ab0108e
Replication Whitepaper Tool on Symantec (needs registration)
http://www.veritas.com/Vrt/offer?_requestid=17351&a_id=9089&
Regards,
James

Please show me some examples for using the carray type fields in FML buffer

How to use Fget and Fchg to access and modify the carray type fields in FML buffer?
please show me some examples?
Thanks!

How to use Fget and Fchg to access and modify the carray type fields in FML buffer?
please show me some examples?
Thanks!

Some Tools for Use With Editing & More

Harm Millaard had posted this list of "favorite tools" in the PrPro Forum. These might be of great use.
Good luck,
Hunt

Noel Carboni offered this utility in the PS forum. I have never used it, so cannot vouch for how well it works.
there is a handy little free tool for actually doing good, reliable searches (though perhaps with a user interface that's a big geeky). It's Stefan Kueng's grepwin tool:
http://tools.tortoisesvn.net/grepWin.html
If you put the right stuff in the right places in its dialog, It will find what you're searching for - quickly and every time, even if encoded in Unicode. It even tells you the things it cannot search in (for example because the file is open), so there's no way you can unknowingly miss anything. Stefan definitely knows what he's doing.
Hunt

Need some info for interview,

Hi,
Could someone please answer this, as i have to prepare for an interview.
Q) List several ways (at least 3) to gather the following information from RHEL5.x server (minimal terminal packages installed no graphics utilities):
1) Free memory available
2) Number of luns
3) Set the hostname of the system
4) How many tcp network connections are in use and by whom
Q)“What possible issues or challenges could arise in a Linux Oracle RAC environment using NIS based lookup? Give an example related to ASM devices”
Hoping for a quick reply
Thank You,

ateeqrahman wrote:
Could someone please answer this, as i have to prepare for an interview.
Q) List several ways (at least 3) to gather the following information from RHEL5.x server (minimal terminal packages installed no graphics utilities):
1) Free memory available
2) Number of luns
3) Set the hostname of the system
4) How many tcp network connections are in use and by whomPersonally, I would not bother asking or answering these question on either side of the interview desk. It does not test knowledge - as you yourself has just now proved by this thread. Knowing what commands can be used does not mean you will know when to use these commands and how to interpret the data supplied by them.
Technical answers like these can often be answered directly from the manual. And that is the exact purpose of a manual - containing such technical details. Why? Because it is impossible to remember all details for commands and software products being used.
What is important is knowing the technical concepts, fundamentals and architecture. Knowing how to analyse a problem, break it down into technical components/layers and troubelshoot these.. and which and what manuals to use to get the technical details as and when required.
Take for example the question of the number of LUNs. Which LUNs? ASM? OCFS? Raw?
And why is the number important? Is this looking at devices at SCSI level? This can then include local drives too. Looking at multipath devices instead? A a single storage device can be partitioned and used as multiple LUNs (e.g. partition 1 as a OCR disk, partition 2 as an OCFS disk, and the remaining partition 3 as an ASM disk). Thus WHAT is the requirement or problem that needs to be addressed by knowing "the number of LUNs"?
The technical question as you list above are meaningless and useless in an interview. If you are asked such questions in an interview, I would have grave concerns about working in that environment as it is a sign that the actual technical components of that environment is not understood in the slightest bit. Nor the type of person required to maintain, support and develop in it...
It means the interviewer is clueless and working from a so-called technical checklist of questions.. and will be incapable of understanding real technical answers as all he/she has is the pat answer for that checklist question.

Reviewing account info for use in store, without credit card?

Hello there, I have an appleID (I made one once I got my macbook) but I can't use it in iTunes or appstore or ping.
iTunes call me to review my info, and once I get to payment method I get stuck, because I have not credit card.
I found that http://support.apple.com/kb/ht2534 but it describes how to pass this with a new account, I don't want to make a new account.
Any idea what to do?

See the following link.
iTunes account without C.C. http://support.apple.com/kb/HT

Organizing some photos for use on iPad

I have thousands of pictures in iPhoto. I have an iPad that I would like to display 200 - 300 of my favorite photos on. How can I select these photos for syncing in iTunes without moving the photos from their current event? I started to create an event called iPad Photos but quickly realized that when I flag a photo and add it to the iPad Photos event, it is removed from the original event.
Also this may be slightly off-topic but when large (above 1.5MB) photos from iPhoto are synced to an iPhone or iPad do they reside on the device at full resolution? I don't need full resolution on a smaller screen such as the iPad or iPhone and don't want to waste memory space. Do I need to take all the full resolution photos and resize before letting iTunes sync with that folder/event?

Create an iPhoto album with the photos you want to sync to your iPad. Connect the iPad to your Mac and launch iTunes. Click on the iPad icon and go to the Photos tab. Select iPhoto in the *+Sync Photos from...+* drop down menu. There select the radio button titled Selected albums, events, ......
In the Albums section select the album with the photos you want to sync and sync.
If you want to reduce the file size of those photos you'll have to export them out of iPhoto with the JPEG Quality level set at Medium or Low. Put those photos in a folder on your hard drive. In iTunes select Choose folder in that drop down menu, navigate to the folder with the reduced sized image files and select that folder. Then sync.
OT

Lost some info for itunes...i think

ok so i restored my comp and now i cant open itunes and its telling me that i cant open itunes because some its required files are missing and to please reinstall.
so my question is, how do i get the files back? is there a way to do it without deleting itunes and then reinstalling it all over?

ok sorry ummm...
ok so i restored the comp and when i was trying to like go into itunes it told me that some parts were missing and to reinstall. so i put the cd in and it gave me the option to uninstall so i did that. and then that just screwed up my whole comp and i had to restart a few times to get it going again. and now everytime i turn on the comp it gives me that please reinstall message. so i went into the add/remove programs thing and i clicked on the itunes icon and clicked uninstall and it gives me that little bar that fills up when its deleted. but the bar fills up half way and then stops. every time i try. so i just clicked the white ipod icon and deleted that.
and i just want everything itunes/ipod off my comp and im gonna redo it

Use of the 'Back' link in Catalog/Portal - Useful info for Catalog Admins

Some info for anyone out there who may have noticed the small 'issue' with catalog items being duplicated when exiting a catalog using the Portal 'Back' link rather than the 'Return to Application/SRM' link.
A problem has been identified there where portal navigation causes duplication of catalog data even where no item is selected in the catalog.
The process might be:
1. User accesses a catalog (any, SAP or External) and selects/adds to cart an item.
2. User selects the 'Add Item' button in the 2nd step of the SC GAF, returning to the same catalog.
3. User clicks on the Portal 'Back' link and is returned to the 2nd step of the Shopping Cart Guided Application Framework
4. The initial shopped item is duplicated in the shopping cart even though no items were selected by the user.
To ensure that this does not happen SAP have created note [1445078|https://service.sap.com/sap/support/notes/1445078] which provides the means to remove the 'Back' link thus negating the possibility of this issue occuring in the case of any catalog access.
Please follow the steps provided in the note to modify the Portal Content and remove the back link entirely.

Dear monique,
The catalog no longer opens in a new window from SRM 7.0 as we now use Portal as UI or NWBC, in order to maintain session reliability the catalog frame is launched from within the Shopping Cart Guided Application Framework, this SC 'session' is then placed in ACTION SUSPEND, until the return from catalog is generated where the session is triggered to reopen with a RESUME command.
If you wish to remove the portal navigation 'back' link, I believe you already have a note for doing so, if this has not worked, re-trace all the steps in case something was missed. It should work. By adding the bypassinb/outb_handler parameters into the call structure you should then have available the Return to SRM link instead in the catalog.
You are also correct, use of teh integrated call structure in SPRO is no longer recommended, it is relevant for older UI technology like ITS.
Regards,
Jason

USEFUL INFO FOR SOME 875 problems i had (and solved)

PROBLEM ONE:
AGP/PCI NOT LOCKING, fix:
this problem was common amongst us 875 owners. the agp/pci setting would not lock when set to 66/33. some of us used clockgen to patch this. well there is a strange fix. to lock it a t 66/33 ( NO MATTER WHAT SETTINGS YOU USE) here is what you do. go into "IDE configuration" set enable Serial ATA to yes. now go back to your agp/pci setings. you will now only have three choices to choose from, instead of selecting in increments, choose 66/33. this works whether or not your have a sata drive or not and does not effect your HD setup. problem solved.
PROBLEM TWO:
AGP CARD CRASHES TO DESKTOP mainly with (3dmark 2001 and dx games), fix:
the problem was caused by two factors. the main issue was heat from the core. it didn't matter whether my card was overclocked or not, i would still freeze or kick me to the desktop. adding two more fans, one laying on the backside of the core, and the other a zalman 90mm pci slot fan positioned over my agp card. if you touch your core (both ati and nvidia, and it is too hot to touch, then you need better cooling for your card, and it will cause this problem. once the cooling was added i havent hade the problem since. note that i already had an iceberq4 fan for my video card. the other factor was my mem volt settings. if my ram voltage is set to 2.7, it would crash eventually, or freeze(even browsing web). once it was set to 2.6 i have not had any problems at all. 2.7 seems to be to high for my ram.
PROBLEM THREE:
HIGH OVERCLOCK while maintaining decent mem bandwidth, fix:
look at my sig. i didnt like running a 5:4 ratio because my ram frequency gets decreased in the process. i could not overclock high enough for my ram to reach 400mhz @ 333 setting. i could reach 370-380 mhz ram freq and 3.2 ghz at 5:4. my solution is overclock @ 1:1 without PAT enabled. i can overclock to my 2.8 to 3.2 (228 FSB, rock solid) and get sandra mem scores over 5000. at 5:4 i only would get 4700.
conclusion, every problem i have had with my board has seem to slowly fade away. with experimentation and other great post on this board i feel i am running the perfect computer. very happy at this point with my product. i hope this post will help others.

I've never had my agp/pci clock overclocked. Mine has always stayed at 66/33 no matter what I did. I have a Sata Raid 0 on ICH5R and maybe that's what's holding the bus speed in place like Medafor said. I do still have my graphic card overclocked everytime I choose Fast or above. I have a 9700 pro which runs at 325 gpu and 310 Ram and If I choose anything else than slow it overclocks to 344/324 regardless of the same 66/33 agp/pci bus. I checked in more that one utility software. This annoys me a lot because I get artifacts when on some 3d apps (games) if the graphic card is Ovclk, so I have to set things to slow and I loose PAT which is the reason I bought a 875 instead of a 865. I'm getting furious because I payed for something that is denyed to me just because msi decided to "cheat" on benchmarks overclocking other peoples hardware. Do you think there's any way of turning off this "feature"?
Also I understand that a raid 0 setup only works with a given controler. If I change for another Mobo with the same ICH5R will I be able to rebuild the raid without loss of data?
Thanks for your help in advance

Some info for use WebDB 2.2

Similar Messages

Maybe you are looking for