Some issue with appstore and software update

Hi all,
I have some issues with app store and software update.
Sometime App Store report that it was available software update for Mac OS X ML. When I enter in App Store to upgrade something goes wrong and I cannot do anything.
If I close and open again App Store, it start to look for update and aftware 5-10 seconds App Store reports that there aren't update available.
I take a look in /var/log/install.log and I found this:
Jun  4 01:40:54 XXX.local Software Update[6741]: Can't load distribution from https://swdist.apple.com/content/downloads/03/60/041-5259/K4G5rj8jSCBBxxxLM2XHpjPJdGspgBHzFX/041-5259.English.dist.gz: Host cert invalid or otherwise insecure download
Jun  4 01:40:54 XXX.local Software Update[6741]: Failed Software Update - trust evaluation failed in SecTrustEvaluate with result: 5
Jun  4 01:40:54 XXX.local Software Update[6741]: Can't load distribution from https://swdist.apple.com/content/downloads/32/52/041-5688/9zts9cfPJssQJdHBjQ2TFM5yxSgqwrT6rM/041-5688.English.dist.gz: Host cert invalid or otherwise insecure downlo
Jun  4 01:40:54 XXX.local Software Update[6741]: Failed Software Update - trust evaluation failed in SecTrustEvaluate with result: 5
Jun  4 01:40:54 XXX.local Software Update[6741]: Can't load distribution from https://swdist.apple.com/content/downloads/21/24/041-5260/876hzpgDST2NBNK2LKmjpPBhDwrL94sJ9x/041-5260.English.dist.gz: Host cert invalid or otherwise insecure download
Jun  4 01:40:54 XXX.local Software Update[6741]: Removing package source SUContentLocatorPackageSource from manager
Any ideas?
Thanks
Regards

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be an item named System. If not, select
File ▹ Add Keychain
from the menu bar and add the following item:
/Library/Keychains/System.keychain
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu at the top, select
When using this certificate: Use System Defaults
Close the inspection window. You'll be prompted for your administrator password to update the settings. Revert all the certificates with non-default trust settings.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Log out, log back in, and test.

Similar Messages

  • Unable to connect to network with Safari and Software Update

    A user I support has encountered a problem with networking. He is unable to connect to the network with Safari and Software Update, but IS able to connect and surf with Foxfire and some other programs. Another unusual symptom is that he actually can connect to one web site (which is in his Bookmarks Bar) with Safari, but can't connect to anything else. He's also unable to navigate off of that one site he connects to. When he runs Network Diagnostics, he gets all green lights (no problems). He has fixed permissions, deleted Safari Cache and .plist, rebooted - not fixed yet. He's using 10.4.8 on a PowerPC G4. Any ideas appreciated (this is the wierdest I've seen in a while!).

    Here's what he did. After reading your post, he created another location in his network preferences, entering EXACTLY the same info that was in his old location (he even used the old DNS addresses), except using a new location name. Then he chose the new location and "everything worked". It's one of life's great mysteries. Thanks for your help - it is appreciated.

  • Some Of My Apps Like AppStore and Software Update won't open on my MacBook Pro

    some of my major softwares like AppStore and SoftwareUpdate and ,,,, are not working!!!
    please help
    (I'm using Mavericks and Cant upgrade it!)

    A.
    You ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.   
    The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below. If you use any iWork applications, you may need to delete them and redownload them from the App Store.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.
    B.
    "Kerio Control" must be updated, reinstalled, or removed.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
    Back up all data before making any changes.
    You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

  • [Xorg] some issues with i915 and gdm

    Hi all
    I'm having some issues starting the X server. I don't know how it happened, my netbook was on standby. After I turned it on, there were loud beep sounds coming out of my computer and the screen was completely black so I shut it down. After I turned it back on I got following issue:
    gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,135094 seconds
    gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,137406 seconds
    gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,135166 seconds
    gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,135076 seconds
    gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,474816 seconds
    gdm-binary[4585]: WARNING: GdmDisplay: display lastet 0,141715 seconds
    gdm-binary[4585]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
    Ok so I tried to start X only:
    Build Date: 17 February 2010 07:52:42PM
    Current version of pixman: 0.16.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 19 21:36:21 2010
    (==) Using config file: "/etc/X11/xorg.conf"
    (EE) intel(0): No kernel modesetting driver detected.
    (EE) Screen(s) found, but none have a usable configuration.
    Fatal server error:
    no screens found
    Please consult the The X.org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    then, I upgraded my system (there was a kernel update) and now I get this when I start X:
    Build Date: 17 February 2010 07:52:42PM
    Current version of pixman: 0.16.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 19 21:45:33 2010
    (==) Using config file: "/etc/X11/xorg.conf"
    FATAL: Error inserting i915 (/lib/modules/2.6.32-ARCH/kernel/drivers/gpu/drm/i915/i915.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    (EE) intel(0): No kernel modesetting driver detected.
    (EE) Screen(s) found, but none have a usable configuration.
    Fatal server error:
    no screens found
    Please consult the The X.org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    I don't know what to do I tried to search the net but I couldn't find much helpful information..
    --blackdeagle

    I don't think there is a problem with the x.org configuration so I hope you backed it up. This line indicates the problem:
    (EE) intel(0): No kernel modesetting driver detected.
    Make sure you haven't disabled KMS (like using i915.modeset=0 in /boot/grub/menu.lst).

  • Acrobat 9 Pro issues with printing and now updating  !!! :(

    hello
    I had an issues with printing from my gmail account or from windows live mail
    so I made a complete re-installation
    now I am stuck with version 9.3.0 and when I check for updates I get a message
    UPDATER IS ALREADY RUNNING
    only... it's not running and nothing is updating !
    I made a restart... just in case... it did not change anything
    as to the printing issue, in case some of you have met it and cleared it...(hope)
    this was with version 9.5.0
    I get no error message but no pdf is created, only a text document with this :
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    72gmvi not found, using Courier.
    44dcmta not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: xshow ]%%
    Stack:
    [96 96 97 72 96 42 64 0]
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    not a good start for my week... I hope yours is nicer
    I'm running Win7 Ultimate x64

    thanks Mylenium
    the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
    it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
    as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
    does my question make sense ????

  • Has anyone had an issue with the Last Software Update for Lion 10.7 causing a system to be non-bootable? As of 12 June 2012?

    I recently did a Software Update of OSX 10.7.4 (on June 12, 2012). It was on an iMac 27" Mid 2010.
    After the Update, the system froze on a grey screen, the update failing. The mouse was still active, but the system was otherwise frozen.
    The keyboard Caps Lock light would not respond. After waiting 15 minutes, I did a Power-Off by holding down the power buttone.
    Upon reboot, the system gave a "grey screen of death" with a lernel Panic, noting the following was on the screen.
    panic(cpu 0 caller 0xffffff800064ba7b): "Unable to find driver for this platform: \"ACPI'.\n"@/SourceCache/xnu/xnu-1699.26.8/iokit/Kernel/IOPlatformExpert.cpp:15 04
    No safe mode.
    Alt boot disk list woill not work.
    Only Cmd-R to get to Revovery Boot.
    I am currentluy restoring off Time Machine Backup taken earlier today.
    Is this something other perople have come acress?
    Would be interested to know...

    Yes. Many are having this issue and it's from Apple's Thunderbolt Update which was released yesterday to support Apple's new Thunderbolt adaptors. Here is information on how to fix this issue: http://reviews.cnet.com/8301-13727_7-57451440-263/thunderbolt-update-plaguing-ma cbook-pros-with-kernel-panics/

  • Video Gaming troubles with MacBook and software updates.

    I've got a question again about The Sims 2 for Macs. I've got a MacBook and have had it for almost a year now. I got the Sims 2 for it when I first got it and it has always worked perfectly on the computer. Well a few days ago, I ran a software update for the first time in a while and now the game won't work at all! When I double click to open the game, the CD drive doesn't even run. The icon bounces at the bottom of the screen for a minute then disappears.
    The updates installed were for OS X 10.4.10, Security Update, QuickTime, Front Row, iTunes and an Audio Update. I don't think it's a coincidence that the game quit working as soon as I installed these updates. DOes anyone know which one could have caused it and/or is there a way to undo a software update without restoring the whole system?

    Sorry, I cant help much, but this is the intel iMac forum. You may have more luck in the correct MacBook forum.

  • Recent issues with DI2 OTA software update

    Am I the only one who has noticed the so-called "software upgrade" for DI2 users was actually a downgrade? Instead of improvements, I have lost some functionality, mainly in the default, stock clock program.
    No longer will it allow me to set a clock for different cities across the country. I have family across the states and it's nice to know what time it is so I'm not calling at inappropriate times. Also, the weather function has been disabled. It will briefly flash under the current time, but then it disappears.
    These are the two issues I have noticed so far, seeing as I have only had the update for a couple of days. Too bad I can't go back and uninstall it. An upgrade should not remove previous functionality.

    Thank you, "mjd7" !  Read the article and was VERY informative!  When I turned the phone on, 1st time today, I figured I would like to delay or "DEFER" it (and I did) until I had time to find out more about it and your post/article gave me a little better feel about IT.
         I LOVE my Dinc2 (does a lot of things of what I want a smartphone to do with no real complaints) and am VERY AFFRAID that this upgrade (which I guess has NO WAY TO STOP IT...) will ROYALLY screw up my phone???  I also loved my original Dinc(1) until THEY rendered it USELESS by running so called SYSTEM UPDATES, a year after I got it!!!  (The upgrade was not even SYSTEM software but, GOOGLE apps type software, they FORCE you to accept, that you don't even want

  • Anyone having issues with Preview since software update to 10.10.1?

    New laptop with latest Yosemite, 10.10.1 Since updating this morning Preview, with its handy tools for inserting text and simple drawing, is giving me the spinning wheel of death every 5 seconds. won't copy and paste my shapes like it used to, it's virtually useless now for simple PDF editing, so sad...

    New laptop with latest Yosemite, 10.10.1 Since updating this morning Preview, with its handy tools for inserting text and simple drawing, is giving me the spinning wheel of death every 5 seconds. won't copy and paste my shapes like it used to, it's virtually useless now for simple PDF editing, so sad...

  • I had some issues with viruses,and went through to delete them. Since then I can't access firefox, and I am getting a message stating, "This application has failed to start because netlkr.dll was not found. Re-installing the application may fix this probl

    Yesterday afternoon I was suddenly bombarded with literally masses of viruses, and since then my firefox has become completely unresponsive. There is an error message stating that "netlkr.dll was not found," and I have no idea whatsoever what exactly that means. I would very much appreciate some help here. I have also already tried numerous times trying to uninstall and re-install firefox, but to no aveil. Nothing I have tried for a solid day now has done any good. Please help!
    == This happened ==
    Every time Firefox opened
    == Yesterday afternoon ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; GTB6.3; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Hey I finally got an older vesion of itunes to work!!! 10.7  x64 for windows 7
    After uninstalling all apple products even  quicktime
    I had to delete everything from (program files, and program  files x64, program data,)
    And all downloads from apple, and I went in to search deleted  other stuff from apple, and itunes
    But definently not my itunes library and Playlist
    Down loaded 10.7 x64 for windows 7, but checked (do not start  when done)
    Then I emptied my recycling bin and restarted my  PC
    I ran geek tech tool box same as reg cure pro, also PC Tools  registry cleaner, and CC Cleaner
    Then I emptied my recycling bin and restarted my  PC
    And wallah... It finally works, and I Love the older version  anyways.
    Easier to download and transfer  music!!!!!

  • Any Issues With MacBook Pro Software Update 1.2?

    Just wondered if there were any problems with the newest update and Tiger.
    frank

    Probably a bit late for this to be helpful to you, but after I installed the update I can't play Civilization 4 anymore.
    And here I was so excited about updated graphics drivers!
    I've contacted Aspyr... I'm sure someone will eventually fix whatever has gone wrong.

  • Firefox issue with website and feed updating

    ''Problems:''
    I have been having this problem for a while. I provided links to pictures below.
    I have one website that sometimes displays properly, while other times, it does not. Also, I have trouble viewing an updated rss feed using firefox. Problems '''cannot''' be replicated with other browsers.
    ''I have tried: ''
    # clearing cache/cookies
    # removing all plugins
    # starting safe mode and resetting firefox parameters
    # did virus/spyware scan
    # and im sure other things as well
    thanks for the help
    problem: http://i56.tinypic.com/20qkikh.jpg
    should be like this: http://i52.tinypic.com/2s8fddi.jpg

    Very strange.
    I had already cleared the recent history according to the instructions from Firefox. But they didn't specify/recommend to delete site preferences as well.
    So I only did cache/cookies. Now I just deleted the site preferences and it worked.
    thanks a lot for the help.

  • OS X 10.6 compatibility issues with hard and software, uninstall Snow Leo?

    I installed Snow Leopard and now I can still print, but not scan. Also, none of my photo SD cards are recognized when inserted into the slot on the printer (HP Photosmart 7280). Since I use the computer for photos and can't import any photos to iPhoto any longer no matter what I do (my Nikon software doesn't work either and Nikon Transfer crashes when I try to get it to work), I think I'll need to uninstall OS X 10.6 until HP or Nikon finally catch up. Any pointers on how to accomplish this without ruining the whole system?
    Thanks.

    Thanks for the info. I've just trashed Safari and reinstalled it, fixed permissions and rebooted and I'm having the same problem.
    The problem also exists still in Quicktime so I reinstalled iTunes and no diff.
    I then tried creating a new user account and logging in but the problem persists...
    I also checked to see if the file / command is located @ /Applications/Safari.app/Contents/MacOS/Safari
    Expected in: /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation and it seems to be there, so not sure why it can't be referenced...
    Any other ideas?

  • Currency issue with PS and SD

    All Experts,
    Have some issue with USD and CAD currency with PS and SD
    We are using a group currency in the controlling area (type 30 set as USD).  In addition we have object currency turned on for the Controlling Area so we have company currency in parallel for each company assigned to the controlling area.  Within CO everything is working fine, the issue appears to be when the CO-PS planned amount is passed to the sales order EK01 condition.  In this case, CO-PS has both object currency and controlling area currency but it uses the controlling area currency as the amount passed to the sales order. 
    Any Help?

    Hi Kishore.,
               Please go throgh this Please check this links perhaps they may help.
    http://help.sap.com/bp_imcv1500/IMC_US/HTML/preconfigured_scenarios.htm
    ETO:
    http://help.sap.com/bp_imcv1500/IMC_DE/HTML/E83_EN_DE.htm
    http://help.sap.com/bp_bblibrary/500/HTML/E46_EN_DE.htm
    MTO:
    http://help.sap.com/bp_bblibrary/500/HTML/V66_BB_EN_US.htm
    http://help.sap.com/bp_imcv1500/IMC_DE/HTML/E70_MTOQuotProc_EN_DE.htm
    PS - SD integration are on
    1.Billing pan, at each WBS element, network and Activity level.
    2. DIP profile which is assigend to item category. DIP for resource related quotation works only with ECP ( easy cost planning).
    3.sales pricing - generally, there r 2 types of sales pricing in PS . lumpsum contract and unit rate contract.
    4. BOS - bill of Services. which has to be activated. It is industry specific solution. If BOS is activated you also have integration for vendor RFQ and Analysis.
    5. resource related Billing
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • Need some help with cfoutput and a tag

    hey there,
    got meself into some issues with <a> and <cfoutput> tags.
    Problem:
    myResult = <a href="http://www.mysite.co.uk" rel="nofollow">mysite</a>
    <cfoutput>#myResult#</cfoutput> outputs "<a href="http://www.mysite.co.uk" rel="nofollow">mysite</a>" (surprise isn't it?)
    now is there any way to output it as html so it would display a link to "mysite"???
    cheers,
    Simon

    thanks!
    I've missed the fact that it was xml data. Just added .xmlText at the end and that sorted my problems. However I'll write down cfsavecontent solution for the future reference.
    cheers,
    Simon

Maybe you are looking for