Some kde aps not found after update

I just did a massive (1gb) update last night (I know update more often!!)
Most things seem to be fine, except several kde aps aren't found. Konqueror, dolphin and kopete are the ones that don't work so far. I searched the forums but didn't find anything. What's up? I assume it has to do with the new kde-meta-* packages. Anyone know how to fix this?
I checked via pacman and the proper packages seem to be installed..

I should have been a lot more wordy on my last post.
Almost all of the time that you get file no found errors for stuff that's in the PATH is because there's a mix of binaries for different architectures (64 bit and 32 bit in case of Arch). Although, with KDE stuff it would be strange to not get wrong ELF class errors. Did you enable any new repos recently?

Similar Messages

  • Nokia c3 chat application not found after updating...

    i updated my mobile software from 4.60 to 8.63. after that  i start using the chat/im built in application but it says "APPLICATION NOT FOUND". I even tried opening it on menu then messaging then chat but it really doesn't open. what may cause this? what should i do? thanks.

    You u need to 1st BACKUP EVERYTHING
    then perform the Firmware Upgrade
    then RESTORE your packed up Programs and Data ...
    or just goto the Ovi store and find some free chat apps and reinstal them,
    its cheaper to paste the links it sends your mobile into your phones browswer and surf using Wifi Connection to download apps and themes. good luck
    N95-1 (8GB-MicroSD),LCG-Audio,Fring,Nimbuzz,Skype,Youtube,iPlayer,Garmin4-GPS.Googlemaps,SkyFire,ZoneTag,Gravity, Sennheiser CX-400-IIs,500-IIs,TR-120 Wireless,HD215'S.AudioTechnica ATX-M50's.BT B-Tube BT Speaker.

  • Files on 60GB iPod not found after updates to 1.2

    Before I restore just thought I would check. My iPod is conflicted as to what is loaded. Problems occur after update of iTunes 7.0 and iPod updater 1.2.
    Manually update is set. iTunes 7.0 says I have 6.0GB of Audio, 13.82GB of Video on a total capacity of 55.68GB iPod. However it also says I have 54.84GB of free space? All music and video files appear with the ! in iTunes, which means file not found.
    However, all titles of the files appear on the iPod as if they were still there but just not readable? From the iPod's settings, under About, it shows I still have 1250 Audio file, 98 videos but 54.84GB of space available. If I try to play files in a playlist, it just breezes through the album art and titles like it can't read the files.
    Reset, reboot and reinstall does nothing.
    iPod is unusable, should I wait for another update?
    Should I just restore and loose some stuff that was not backed up? (stupid on my part I know.)
    Or does anyone else know of a possible trick I could try?
    Dell   Windows XP  
    Dell   Windows XP  

    Applied Firmware Update 1.2.1 and it worked...
    Thank you Apple for finally fixing a major problem
    without ever acknowledging you had it...
    or even indicating what you update fixed when you distibuted
    it...
    I think apple needs some lessons how to provide support...
    without irritating its customer base...
    All you have to do is communicate...
    Respond with a message like "Known Problem" working on fix.
    would do wonders... And having an apple employee update
    the Discussions with an indication that you acknowledge
    your user community is having a serious problem and thank them for continueing to wait for a fix..

  • Second AirPort Express Basisstation not found after update

    Hello!
    I'm trying to set a second AEBS in client mode (as defined on http://docs.info.apple.com/article.html?artnum=108040), because I want to use it for AirTunes while I'm connected to the Internet thru the other AEBS I've had.
    I'm following the instructions founded in the support-sites: I do a hard reset for my second AEBS and then configure it with the AirPort Utility (latest version) to use the existing network of my first AEBS.
    Everything is ok *ONLY if I let the network unprotected*!
    As soon as I try to use some kind of protection (thru WPA/WPA2 and password or by hiding the name of the network or even restricting the computers aloud to access the network thru the MAC-adresses), the second AEBS couldn't be founded anymore after the update.
    I've tried this from my MacMini PPC running Leopard and from a pre-latest MBP running Tiger ... both succesless!
    Do you have any advice?
    Thanks!
    Regards,
    Vlad
    P.S. Here are the settings for my two AEBS ... in german (sorry!):
    The first AEBS:
    AirPort Express-Name: BS1
    Basisstation-Status: Normal
    Version: 6.3
    Seriennummer: ...
    AirPort-ID: 00:11:60:2E:7D
    Ethernet-ID: 00:11:60:2E:7C
    USB-Drucker: LaserDrucker
    Drahtloser Modus: Drahtloses Netzwerk anlegen
    Netzwerkname: NW1
    Schutz: Persönlicher WPA/WPA2
    Kanal: 1 (Automatisch)
    Drahtlose Clients: 1
    Verbinden über: PPPoE
    IP-Adresse: 85.182.10.203
    Netzwerkname: NW1
    Sendermodus: 802.11b/g-kompatibel
    Kanal: Automatisch
    Schutz: Persönlicher WPA/WPA2
    Optionen für drahtloses Netzwerk:
    Multicast-Rate: 5,5 MBit/s (but I have also tried with 2 MBit/s)
    "Als geschlossenes Netzwerk anlegen" is choosen (but I've tried also without)
    "Störunempfindlichkeit aktivieren" is choosen (but I've tried also without)
    The second AEBS after the hard-reset and before update:
    AirPort Express-Name: BS2
    Basisstation-Status: notLocalized (ist auch gelb)
    Version: 6.3
    Seriennummer: ...
    AirPort-ID: 00:11:24:EB:58:C5
    Ethernet-ID: 00:11:24:EB:58:C5
    Drahtloser Modus: Mit drahtlosem Netzwerk verbinden
    Netzwerkname: NW1
    Schutz: Persönlicher WPA/WPA2
    Kanal: 6 (Automatisch)
    Verbinden über: Drahtloses Netzwerk
    IP-Adresse: (leer)
    Drahtloser Modus: Mit drahtlosem Netzwerk verbinden
    Netzwerkname: NW1
    Schutz: Persönlicher WPA/WPA2
    Passwort habe ich eingetragen
    Optionen für drahtloses Netzwerk:
    "Störunempfindlichkeit aktivieren" is choosen (but I've tried also without)
    Verbinden über: (inaktiv)
    IPv4 konfigurieren: DHCP verwenden
    IP-Adresse: (leer)
    Teilnetzmaske: 255.255.255.255
    everything else is void
    "AirTunes aktivieren" is choosen
    P.P.S. After clicking on "Update" I receive the following error-message:
    "Das AirPort-Dienstprogramm kann Ihre Basisstation nach dem Neustart nicht finden.
    Die Einstellungen für diese Basisstation wurden erfolgreich aktualisiert. Es gab jedoch ein Problem beim Verbinden mit dem drahtlosen Netzwerk oder die Basisstation wurde nicht gefunden. Wählen Sie Ihr Netzwerk aus dem AirPort-Menü und versuchen Sie es erneut."

    Same problem here:
    I disconnected one of my apx from power and now
    I'm not able to configure it.
    After updating the APX, the Airport Admin Utility cannot find
    it anymore...

  • Server not found after updating firefox. HEEEEELLLPPP!!!!

    Im using windows Vista. 3days ago, I launched firefox setup3.6..exe internet connection and mozilla worked fine.
    when i restarted my laptop, I just can't connect to the internet- it says SERVER NOT FOUND but I am sure Im connected (my brother's laptop is)
    so I uninstalled my NORTON,
    i also UNINSTALLED my MOZILLA and reinstalled it.
    stil NOT WORKING
    checked my firewall... checked mozilla TOOLs- use no proxy
    what am i suppose to do?? i really need my MOZILLA. thanks

    Did you empty your browser cache before typing in your url into your web browser?
    Did you type in the url directly rather than clicking on the visit site button?
    Have you actually published your site? 
    Are you using iWeb built in ftp?  If you are then perhaps try publishing your site to a local folder from iWeb and using an ftp client such as Cyberduck to upload your site to your server.

  • Aps Not Working after update 12.5.11

    herro
    iphone 4 wont load aps now after it got recent update on 11.5.11
    anyone else having issues? all it does is flash whatever ap im trying to get into then exits it back to the main screen

    Does it do this even after you Reset your iPhone? (Hold down the Home and Sleep buttons, ignore the Off slider, wait for the Apple logo and let go).

  • IPod not found after update to 9.0.3

    I updated my iTunes to the latest version (9.0.3)and ever since, I have not been able to sync my iPod. In fact, iTunes won't even recognize my iPod and when I conncet the iPod to my computer iTunes completely freezes. Also when I connect my iPod, my computer opened up the F: thinking that's what it should do when the iPod was connected. I used the troubleshooting on the support page and changed the drive letter, but it still didn't work. I've also tried the suggestions of uninstalling and reinstalling iTunes, and still nothing, and I've tried restarting iTunes, and of course...nothing. I see others are having crazy problems with the update. Am I to assume this is an update problem, or is there perhaps something wrong with my iPod? If/when Apple fixes this, will there be a good chance the iTunes will recognize my iPod again? Any suggestions would be appreciated!

    Same here, any solutions?

  • Some images are not loading after update and have explored options and settings without result

    a lot of sites visited do not show images. ie google, weather maps, my home page for isp. have tried most suggestions and has occurred only since f/fox update.

    You probably have seen this article, but just in case you haven't, it's a pretty comprehensive list of things to check:
    [https://support.mozilla.com/en-US/kb/Images%20or%20animations%20do%20not%20show Images or animations do not show | Troubleshooting | Firefox Help]
    Also, if you are using an ad blocking add-on, you might try disabling that in case it has gone haywire (e.g., bad rule set update).

  • My iphone 3gs is not activating after updating my software with i tunes...what shall i do? cant i go back to my normal version which was ios 4.1

    my iphone 3gs which is not associated with this accunt is not activating after updating the sof tware, it connects to i tunes but i tunes says "we arh your unable to continue with your activation at this time, please try again later or contact customer care". my iphone aslo just says it cannot be activated or something like that every time i try. i have been waiting for 4 hours now but it still hasnt worked. how can i uninstal this update and go back to my old version which ws ios 4.1 or or ios 4,3. i dont even know what version it updated to, im assuming it is ios5 but not sure. it says try connecting to i tunes as well but it is connected and i tunes cant activate it either. my phone is connect to a wifi but it stll says no service.
    i will really appreciate some help.
    thanks.

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?

  • F5 is not working after update of windows 8.

    f5 is not working after update of windows 8 in my laptop. Rest of the function keys are working.
    my laptop details are
           Product Name:    HP Pavilion 15-e008tu Notebook PC  

    Hello prem23,
    What did the F5 key do before? According to your manual in the Action Keys list (page 32-33), that key wasn't tied to anything unless its just for page refresh.
    If a Windows update breaks something, the best way I know to correct the problem is to uninstall that update.
    OR
    You can revert Windows back to an earlier state before the update with a Restore Point provided you didn't turn off that feature. If for some reason it is turned off, you will not be able to revert to that point as one was not created.
    After the restore, only install one windows update at a time until you find the culprit and uninstall it. This way you have the other updates installed. YES this can be a long process.
     http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03327545&cc=us&dlc=en&lc=en

  • Firefox does not start after updates

    Every time i get an update, download it and restart Firefox, it does not restart and i have to run the set file again. It means too that the updates have not been dowl=nloaded !
    Windows 7 ultimate. 4Gb ram 1 Tb Regards

    I AM ABSOLUTELY SICK-SICK-SICK OF THIS PROBLEM. I HAVE TRIED EVERYTHING BUT IT STILL DOES NOT RESTART AFTER UPDATES. I HAVE DELETED/CREATED NEW PROFILES, DONE CLEAN INSTALLS - NO CHANGE!!!
    I HAVE CHECKED FOR VIRUSES - NOTHING. CLEAN. I AM ABOUT READY TO GIVE UP AND SEND A LETTER TO A LOCAL TECH/MEDIA PERSON SO THAT THEY CAN WRITE AN ARTICLE ABOUT THIS ISSUE THAT FOR SOME REASON MANY OTHERS HAVE AS WELL AND YOU=MOZILLA HAVE NOT OFERED ANYTHING CLOSE TO A SATISFACTORY RESPONSE, EXPLANATION, FIX, ETC ETC ETC

  • Fail to Abend when Row Not Found for Update?

    I'm using Coldfusion 9 against a IBM mainframe DB2 database.  I have a condition that when a row is not found for update in a cfquery, execute an insert cfquery.  Sounds logical and easy, right?  Not so!  Error trapping is failing to return an error condition when the row was not found for update! 
    Here's the code:
    <cftry>
         <cfinclude template="qry_update_table.cfm">
         <cfcatch type="any">
              <cfinclude template="dsp_errorInformation.cfm">
              <cfabort>
         </cfcatch>
    </cftry>
    <cfdump var=#tmec04_result#><cfabort>
    The Query code is:
    <cflock timeout="15" name="UpdateTUID04Lock" type="exclusive">
         <cfquery datasource="#APPLICATION.DB2_DSN#" name="update_tuid04" result="tmec04_result">
              UPDATE #APPLICATION.SQLID#.TUID04
                   SET   MON_BEG_TIME  = <cfqueryparam value = #NEW_MON_BEG# cfsqltype="cf_sql_time">
                          , MON_END_TIME  = <cfqueryparam value = #NEW_MON_END# cfsqltype="cf_sql_time">
              WHERE  USER_ID    = <cfqueryparam value = #NEW_USER_ID# cfsqltype="cf_sql_varchar">
         </cfquery>
    </cflock>
    There is no row for the NEW_USER_ID, so I would expect an error condition.  No such luck.  The dump of temc04_result just shows me the SQL, the record count (0), the execution time (0), and the cached status (false).  No SQL code.  And a dump of CFCATCH shows that all is well.  I expected to get cfcatch.nativeerrorcode = 100 (Row not found).  Nope.  Got a zero.
    Any suggestions.

    Regarding this:
    There is no row for the NEW_USER_ID, so I would expect an error condition.
    Your expectation is incorrect.  What actually happens is that the query executes and no rows get updated.
    What has to happen is that you have to see whether or not the record is there, and if not, insert it.  There are lot's of ways to do that.  I think the simplest is an insert query,
    insert into yourtable
    (field1, field2, etc)
    select distinct value1, value2, etc
    from some small table
    where not exists (something)
    Followed by the update query.

  • VIBER is not working after updating android 4.3 on my Experia SP.Any idea or solution ?:-)

    Viber is not working after updating my Xperia SP to new Android 4.3There are totally confusing simptoms: I can not hear the other party,  the other party can not hear me , I can not answer the call even when I try to  or the other party can not answer my viber call even if they try to. CAN SOMEONE HELP or HAVE ANY IDEA :-)

    I also had problems with xperia sp after updating to 4.3 - phone was slow to an extent of being unusable. However, even before update (on firmware 4.1) I found the phone quite slow.I am very happy that I returned the phone to my carrier in exchange to nexus 5. When I got hold of it I really felt the change in responsivenes compared to sony. I cannot recommend it more - it has all the sony has + better responsivness, better screen, better battery life (yes, I have tested this), better camera minus bloatware. I got all of this for paying 50 eur more. That was my second and last phone from sony. After having sony xperia S for 1 week and returning it because of wifi problems and after trying xperia sp and again returning it because of crappily written firmware I really wonder what are people at sony thinking about.  People, don't you see that sony does not give a **bleep** about customer satisfaction after getting their money?  Of course, you can downgrade manually, but don't forget that this voids your warranty - staff at service centre would be more than glad to tell you you have just voided your warranty because you brought them phone that you had to downgrade because of crapilly written UPgrade!.  In addition to that downgrade means spending your a couple of hours of your precious time correcting mistakes of multinational corporation that simply does not give a **bleep**. Throw your sony into trash instead, and use those hours to earn money with which you can buy new phone that will actually work. 

  • Import iTunes Media Library, some files were not found problem

    Hi guys,
    I am trying to restore my music library info via importing from iTunes Media Library xml file I backed up. During import, iTunes gave me error message box saying that some files were not found and therefore won't get imported. After it's done, I checked the iTune and I noticed many of the music files did not get imported at all, even their locations are correct. Is it because iTunes stopped importing at the first entry that it found its location not existed and therefore skipped the rest all along? Even later ones might be valid. Is this the case?
    Is there an easy way to find out what those entries are? So perhaps I could go and edit them directly in the xml file. The message box did not give much information
    Any help would be really appreciated,
    Thanks alot
    Windows XP Pro
      Windows XP Pro  

    Hi Chris
    I have now experimented a little more and discovered that although Time Capsule (TC) is showing in Finder as a Shared Drive at laptop startup (and showing a status of a connected user, me) it is not actually 'mounted' in the true sense of the word i.e. the unmount/eject symbol is not showing next to it nor either of the drives connected to the TC. By clicking on either of the 2 drives (i.e. the TC 'Data' disk or the TC USB-connected drive) the status changes to show the dismount symbol on both the selected drive and the TC in the Finder side bar. Launching iTunes after this intervention works every time as per your advice. Not the Apple 'it just works' that I have come to expect and appreciate but at least I now understand how to make it work reliably..........many thanks and I hope Apple just makes it work sometine in the future

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

Maybe you are looking for